mirror of https://gitee.com/openkylin/linux.git
264 lines
7.6 KiB
Plaintext
264 lines
7.6 KiB
Plaintext
/*
|
|
* Common Device Tree Source for IGEPv2
|
|
*
|
|
* Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
|
|
* Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include "omap3-igep.dtsi"
|
|
#include "omap-gpmc-smsc9221.dtsi"
|
|
|
|
/ {
|
|
|
|
leds {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&leds_pins>;
|
|
compatible = "gpio-leds";
|
|
|
|
boot {
|
|
label = "omap3:green:boot";
|
|
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
user0 {
|
|
label = "omap3:red:user0";
|
|
gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
user1 {
|
|
label = "omap3:red:user1";
|
|
gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
user2 {
|
|
label = "omap3:green:user1";
|
|
gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
/* HS USB Port 1 Power */
|
|
hsusb1_power: hsusb1_power_reg {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "hsusb1_vbus";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */
|
|
startup-delay-us = <70000>;
|
|
};
|
|
|
|
/* HS USB Host PHY on PORT 1 */
|
|
hsusb1_phy: hsusb1_phy {
|
|
compatible = "usb-nop-xceiv";
|
|
reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
|
|
vcc-supply = <&hsusb1_power>;
|
|
};
|
|
|
|
tfp410: encoder {
|
|
compatible = "ti,tfp410";
|
|
powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
tfp410_in: endpoint {
|
|
remote-endpoint = <&dpi_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
tfp410_out: endpoint {
|
|
remote-endpoint = <&dvi_connector_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
dvi0: connector {
|
|
compatible = "dvi-connector";
|
|
label = "dvi";
|
|
|
|
digital;
|
|
|
|
ddc-i2c-bus = <&i2c3>;
|
|
|
|
port {
|
|
dvi_connector_in: endpoint {
|
|
remote-endpoint = <&tfp410_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&omap3_pmx_core {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <
|
|
&tfp410_pins
|
|
&dss_dpi_pins
|
|
>;
|
|
|
|
tfp410_pins: pinmux_tfp410_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
|
|
>;
|
|
};
|
|
|
|
dss_dpi_pins: pinmux_dss_dpi_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
|
|
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
|
|
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
|
|
OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
|
|
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
|
|
OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
|
|
OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
|
|
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
|
|
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
|
|
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
|
|
OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
|
|
OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
|
|
OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
|
|
OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
|
|
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
|
|
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
|
|
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
|
|
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
|
|
OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
|
|
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
|
|
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
|
|
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
|
|
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
|
|
OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
|
|
OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
|
|
OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
|
|
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
|
|
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
|
|
>;
|
|
};
|
|
|
|
uart2_pins: pinmux_uart2_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
|
|
OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
|
|
OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
|
|
OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
|
|
>;
|
|
};
|
|
|
|
smsc9221_pins: pinmux_smsc9221_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&omap3_pmx_core2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <
|
|
&hsusbb1_pins
|
|
>;
|
|
|
|
hsusbb1_pins: pinmux_hsusbb1_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
|
|
OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
|
|
OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */
|
|
OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */
|
|
OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */
|
|
OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */
|
|
OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */
|
|
OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */
|
|
OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */
|
|
OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */
|
|
OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */
|
|
OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
|
|
>;
|
|
};
|
|
|
|
leds_pins: pinmux_leds_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
|
|
OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
|
|
OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
|
|
>;
|
|
};
|
|
|
|
mmc1_wp_pins: pinmux_mmc1_cd_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4) /* etk_d15.gpio_29 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <100000>;
|
|
|
|
/*
|
|
* Display monitor features are burnt in the EEPROM
|
|
* as EDID data.
|
|
*/
|
|
eeprom@50 {
|
|
compatible = "ti,eeprom";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
&gpmc {
|
|
ranges = <0 0 0x30000000 0x01000000>, /* CS0: 16MB for NAND */
|
|
<5 0 0x2c000000 0x01000000>; /* CS5: 16MB for ethernet */
|
|
|
|
ethernet@gpmc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&smsc9221_pins>;
|
|
reg = <5 0 0xff>;
|
|
interrupt-parent = <&gpio6>;
|
|
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_pins>;
|
|
};
|
|
|
|
&usbhshost {
|
|
port1-mode = "ehci-phy";
|
|
};
|
|
|
|
&usbhsehci {
|
|
phys = <&hsusb1_phy>;
|
|
};
|
|
|
|
&vpll2 {
|
|
/* Needed for DSS */
|
|
regulator-name = "vdds_dsi";
|
|
};
|
|
|
|
&dss {
|
|
status = "ok";
|
|
|
|
port {
|
|
dpi_out: endpoint {
|
|
remote-endpoint = <&tfp410_in>;
|
|
data-lines = <24>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&mmc1 {
|
|
pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>;
|
|
wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; /* gpio_29 */
|
|
};
|