mirror of https://gitee.com/openkylin/linux.git
1151 lines
28 KiB
C
1151 lines
28 KiB
C
/*
|
|
* Copyright (C) 2005, 2006 IBM Corporation
|
|
* Copyright (C) 2014, 2015 Intel Corporation
|
|
*
|
|
* Authors:
|
|
* Leendert van Doorn <leendert@watson.ibm.com>
|
|
* Kylene Hall <kjhall@us.ibm.com>
|
|
*
|
|
* Maintained by: <tpmdd-devel@lists.sourceforge.net>
|
|
*
|
|
* Device driver for TCG/TCPA TPM (trusted platform module).
|
|
* Specifications at www.trustedcomputinggroup.org
|
|
*
|
|
* This device driver implements the TPM interface as defined in
|
|
* the TCG TPM Interface Spec version 1.2, revision 1.0.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation, version 2 of the
|
|
* License.
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/pnp.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/freezer.h>
|
|
#include "tpm.h"
|
|
|
|
enum tis_access {
|
|
TPM_ACCESS_VALID = 0x80,
|
|
TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
|
|
TPM_ACCESS_REQUEST_PENDING = 0x04,
|
|
TPM_ACCESS_REQUEST_USE = 0x02,
|
|
};
|
|
|
|
enum tis_status {
|
|
TPM_STS_VALID = 0x80,
|
|
TPM_STS_COMMAND_READY = 0x40,
|
|
TPM_STS_GO = 0x20,
|
|
TPM_STS_DATA_AVAIL = 0x10,
|
|
TPM_STS_DATA_EXPECT = 0x08,
|
|
};
|
|
|
|
enum tis_int_flags {
|
|
TPM_GLOBAL_INT_ENABLE = 0x80000000,
|
|
TPM_INTF_BURST_COUNT_STATIC = 0x100,
|
|
TPM_INTF_CMD_READY_INT = 0x080,
|
|
TPM_INTF_INT_EDGE_FALLING = 0x040,
|
|
TPM_INTF_INT_EDGE_RISING = 0x020,
|
|
TPM_INTF_INT_LEVEL_LOW = 0x010,
|
|
TPM_INTF_INT_LEVEL_HIGH = 0x008,
|
|
TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
|
|
TPM_INTF_STS_VALID_INT = 0x002,
|
|
TPM_INTF_DATA_AVAIL_INT = 0x001,
|
|
};
|
|
|
|
enum tis_defaults {
|
|
TIS_MEM_LEN = 0x5000,
|
|
TIS_SHORT_TIMEOUT = 750, /* ms */
|
|
TIS_LONG_TIMEOUT = 2000, /* 2 sec */
|
|
};
|
|
|
|
struct tpm_info {
|
|
struct resource res;
|
|
/* irq > 0 means: use irq $irq;
|
|
* irq = 0 means: autoprobe for an irq;
|
|
* irq = -1 means: no irq support
|
|
*/
|
|
int irq;
|
|
};
|
|
|
|
/* Some timeout values are needed before it is known whether the chip is
|
|
* TPM 1.0 or TPM 2.0.
|
|
*/
|
|
#define TIS_TIMEOUT_A_MAX max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_A)
|
|
#define TIS_TIMEOUT_B_MAX max(TIS_LONG_TIMEOUT, TPM2_TIMEOUT_B)
|
|
#define TIS_TIMEOUT_C_MAX max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_C)
|
|
#define TIS_TIMEOUT_D_MAX max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_D)
|
|
|
|
#define TPM_ACCESS(l) (0x0000 | ((l) << 12))
|
|
#define TPM_INT_ENABLE(l) (0x0008 | ((l) << 12))
|
|
#define TPM_INT_VECTOR(l) (0x000C | ((l) << 12))
|
|
#define TPM_INT_STATUS(l) (0x0010 | ((l) << 12))
|
|
#define TPM_INTF_CAPS(l) (0x0014 | ((l) << 12))
|
|
#define TPM_STS(l) (0x0018 | ((l) << 12))
|
|
#define TPM_STS3(l) (0x001b | ((l) << 12))
|
|
#define TPM_DATA_FIFO(l) (0x0024 | ((l) << 12))
|
|
|
|
#define TPM_DID_VID(l) (0x0F00 | ((l) << 12))
|
|
#define TPM_RID(l) (0x0F04 | ((l) << 12))
|
|
|
|
struct priv_data {
|
|
bool irq_tested;
|
|
};
|
|
|
|
#if defined(CONFIG_PNP) && defined(CONFIG_ACPI)
|
|
static int has_hid(struct acpi_device *dev, const char *hid)
|
|
{
|
|
struct acpi_hardware_id *id;
|
|
|
|
list_for_each_entry(id, &dev->pnp.ids, list)
|
|
if (!strcmp(hid, id->id))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int is_itpm(struct acpi_device *dev)
|
|
{
|
|
return has_hid(dev, "INTC0102");
|
|
}
|
|
#else
|
|
static inline int is_itpm(struct acpi_device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* Before we attempt to access the TPM we must see that the valid bit is set.
|
|
* The specification says that this bit is 0 at reset and remains 0 until the
|
|
* 'TPM has gone through its self test and initialization and has established
|
|
* correct values in the other bits.' */
|
|
static int wait_startup(struct tpm_chip *chip, int l)
|
|
{
|
|
unsigned long stop = jiffies + chip->vendor.timeout_a;
|
|
do {
|
|
if (ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
|
|
TPM_ACCESS_VALID)
|
|
return 0;
|
|
msleep(TPM_TIMEOUT);
|
|
} while (time_before(jiffies, stop));
|
|
return -1;
|
|
}
|
|
|
|
static int check_locality(struct tpm_chip *chip, int l)
|
|
{
|
|
if ((ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
|
|
(TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
|
|
(TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
|
|
return chip->vendor.locality = l;
|
|
|
|
return -1;
|
|
}
|
|
|
|
static void release_locality(struct tpm_chip *chip, int l, int force)
|
|
{
|
|
if (force || (ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
|
|
(TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) ==
|
|
(TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID))
|
|
iowrite8(TPM_ACCESS_ACTIVE_LOCALITY,
|
|
chip->vendor.iobase + TPM_ACCESS(l));
|
|
}
|
|
|
|
static int request_locality(struct tpm_chip *chip, int l)
|
|
{
|
|
unsigned long stop, timeout;
|
|
long rc;
|
|
|
|
if (check_locality(chip, l) >= 0)
|
|
return l;
|
|
|
|
iowrite8(TPM_ACCESS_REQUEST_USE,
|
|
chip->vendor.iobase + TPM_ACCESS(l));
|
|
|
|
stop = jiffies + chip->vendor.timeout_a;
|
|
|
|
if (chip->vendor.irq) {
|
|
again:
|
|
timeout = stop - jiffies;
|
|
if ((long)timeout <= 0)
|
|
return -1;
|
|
rc = wait_event_interruptible_timeout(chip->vendor.int_queue,
|
|
(check_locality
|
|
(chip, l) >= 0),
|
|
timeout);
|
|
if (rc > 0)
|
|
return l;
|
|
if (rc == -ERESTARTSYS && freezing(current)) {
|
|
clear_thread_flag(TIF_SIGPENDING);
|
|
goto again;
|
|
}
|
|
} else {
|
|
/* wait for burstcount */
|
|
do {
|
|
if (check_locality(chip, l) >= 0)
|
|
return l;
|
|
msleep(TPM_TIMEOUT);
|
|
}
|
|
while (time_before(jiffies, stop));
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static u8 tpm_tis_status(struct tpm_chip *chip)
|
|
{
|
|
return ioread8(chip->vendor.iobase +
|
|
TPM_STS(chip->vendor.locality));
|
|
}
|
|
|
|
static void tpm_tis_ready(struct tpm_chip *chip)
|
|
{
|
|
/* this causes the current command to be aborted */
|
|
iowrite8(TPM_STS_COMMAND_READY,
|
|
chip->vendor.iobase + TPM_STS(chip->vendor.locality));
|
|
}
|
|
|
|
static int get_burstcount(struct tpm_chip *chip)
|
|
{
|
|
unsigned long stop;
|
|
int burstcnt;
|
|
|
|
/* wait for burstcount */
|
|
/* which timeout value, spec has 2 answers (c & d) */
|
|
stop = jiffies + chip->vendor.timeout_d;
|
|
do {
|
|
burstcnt = ioread8(chip->vendor.iobase +
|
|
TPM_STS(chip->vendor.locality) + 1);
|
|
burstcnt += ioread8(chip->vendor.iobase +
|
|
TPM_STS(chip->vendor.locality) +
|
|
2) << 8;
|
|
if (burstcnt)
|
|
return burstcnt;
|
|
msleep(TPM_TIMEOUT);
|
|
} while (time_before(jiffies, stop));
|
|
return -EBUSY;
|
|
}
|
|
|
|
static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
|
|
{
|
|
int size = 0, burstcnt;
|
|
while (size < count &&
|
|
wait_for_tpm_stat(chip,
|
|
TPM_STS_DATA_AVAIL | TPM_STS_VALID,
|
|
chip->vendor.timeout_c,
|
|
&chip->vendor.read_queue, true)
|
|
== 0) {
|
|
burstcnt = get_burstcount(chip);
|
|
for (; burstcnt > 0 && size < count; burstcnt--)
|
|
buf[size++] = ioread8(chip->vendor.iobase +
|
|
TPM_DATA_FIFO(chip->vendor.
|
|
locality));
|
|
}
|
|
return size;
|
|
}
|
|
|
|
static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
|
|
{
|
|
int size = 0;
|
|
int expected, status;
|
|
|
|
if (count < TPM_HEADER_SIZE) {
|
|
size = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
/* read first 10 bytes, including tag, paramsize, and result */
|
|
if ((size =
|
|
recv_data(chip, buf, TPM_HEADER_SIZE)) < TPM_HEADER_SIZE) {
|
|
dev_err(chip->pdev, "Unable to read header\n");
|
|
goto out;
|
|
}
|
|
|
|
expected = be32_to_cpu(*(__be32 *) (buf + 2));
|
|
if (expected > count) {
|
|
size = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
if ((size +=
|
|
recv_data(chip, &buf[TPM_HEADER_SIZE],
|
|
expected - TPM_HEADER_SIZE)) < expected) {
|
|
dev_err(chip->pdev, "Unable to read remainder of result\n");
|
|
size = -ETIME;
|
|
goto out;
|
|
}
|
|
|
|
wait_for_tpm_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
|
|
&chip->vendor.int_queue, false);
|
|
status = tpm_tis_status(chip);
|
|
if (status & TPM_STS_DATA_AVAIL) { /* retry? */
|
|
dev_err(chip->pdev, "Error left over data\n");
|
|
size = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
tpm_tis_ready(chip);
|
|
release_locality(chip, chip->vendor.locality, 0);
|
|
return size;
|
|
}
|
|
|
|
static bool itpm;
|
|
module_param(itpm, bool, 0444);
|
|
MODULE_PARM_DESC(itpm, "Force iTPM workarounds (found on some Lenovo laptops)");
|
|
|
|
/*
|
|
* If interrupts are used (signaled by an irq set in the vendor structure)
|
|
* tpm.c can skip polling for the data to be available as the interrupt is
|
|
* waited for here
|
|
*/
|
|
static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len)
|
|
{
|
|
int rc, status, burstcnt;
|
|
size_t count = 0;
|
|
|
|
if (request_locality(chip, 0) < 0)
|
|
return -EBUSY;
|
|
|
|
status = tpm_tis_status(chip);
|
|
if ((status & TPM_STS_COMMAND_READY) == 0) {
|
|
tpm_tis_ready(chip);
|
|
if (wait_for_tpm_stat
|
|
(chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b,
|
|
&chip->vendor.int_queue, false) < 0) {
|
|
rc = -ETIME;
|
|
goto out_err;
|
|
}
|
|
}
|
|
|
|
while (count < len - 1) {
|
|
burstcnt = get_burstcount(chip);
|
|
for (; burstcnt > 0 && count < len - 1; burstcnt--) {
|
|
iowrite8(buf[count], chip->vendor.iobase +
|
|
TPM_DATA_FIFO(chip->vendor.locality));
|
|
count++;
|
|
}
|
|
|
|
wait_for_tpm_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
|
|
&chip->vendor.int_queue, false);
|
|
status = tpm_tis_status(chip);
|
|
if (!itpm && (status & TPM_STS_DATA_EXPECT) == 0) {
|
|
rc = -EIO;
|
|
goto out_err;
|
|
}
|
|
}
|
|
|
|
/* write last byte */
|
|
iowrite8(buf[count],
|
|
chip->vendor.iobase + TPM_DATA_FIFO(chip->vendor.locality));
|
|
wait_for_tpm_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
|
|
&chip->vendor.int_queue, false);
|
|
status = tpm_tis_status(chip);
|
|
if ((status & TPM_STS_DATA_EXPECT) != 0) {
|
|
rc = -EIO;
|
|
goto out_err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
out_err:
|
|
tpm_tis_ready(chip);
|
|
release_locality(chip, chip->vendor.locality, 0);
|
|
return rc;
|
|
}
|
|
|
|
static void disable_interrupts(struct tpm_chip *chip)
|
|
{
|
|
u32 intmask;
|
|
|
|
intmask =
|
|
ioread32(chip->vendor.iobase +
|
|
TPM_INT_ENABLE(chip->vendor.locality));
|
|
intmask &= ~TPM_GLOBAL_INT_ENABLE;
|
|
iowrite32(intmask,
|
|
chip->vendor.iobase +
|
|
TPM_INT_ENABLE(chip->vendor.locality));
|
|
devm_free_irq(chip->pdev, chip->vendor.irq, chip);
|
|
chip->vendor.irq = 0;
|
|
}
|
|
|
|
/*
|
|
* If interrupts are used (signaled by an irq set in the vendor structure)
|
|
* tpm.c can skip polling for the data to be available as the interrupt is
|
|
* waited for here
|
|
*/
|
|
static int tpm_tis_send_main(struct tpm_chip *chip, u8 *buf, size_t len)
|
|
{
|
|
int rc;
|
|
u32 ordinal;
|
|
unsigned long dur;
|
|
|
|
rc = tpm_tis_send_data(chip, buf, len);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* go and do it */
|
|
iowrite8(TPM_STS_GO,
|
|
chip->vendor.iobase + TPM_STS(chip->vendor.locality));
|
|
|
|
if (chip->vendor.irq) {
|
|
ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
|
|
|
|
if (chip->flags & TPM_CHIP_FLAG_TPM2)
|
|
dur = tpm2_calc_ordinal_duration(chip, ordinal);
|
|
else
|
|
dur = tpm_calc_ordinal_duration(chip, ordinal);
|
|
|
|
if (wait_for_tpm_stat
|
|
(chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID, dur,
|
|
&chip->vendor.read_queue, false) < 0) {
|
|
rc = -ETIME;
|
|
goto out_err;
|
|
}
|
|
}
|
|
return len;
|
|
out_err:
|
|
tpm_tis_ready(chip);
|
|
release_locality(chip, chip->vendor.locality, 0);
|
|
return rc;
|
|
}
|
|
|
|
static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
|
|
{
|
|
int rc, irq;
|
|
struct priv_data *priv = chip->vendor.priv;
|
|
|
|
if (!chip->vendor.irq || priv->irq_tested)
|
|
return tpm_tis_send_main(chip, buf, len);
|
|
|
|
/* Verify receipt of the expected IRQ */
|
|
irq = chip->vendor.irq;
|
|
chip->vendor.irq = 0;
|
|
rc = tpm_tis_send_main(chip, buf, len);
|
|
chip->vendor.irq = irq;
|
|
if (!priv->irq_tested)
|
|
msleep(1);
|
|
if (!priv->irq_tested)
|
|
disable_interrupts(chip);
|
|
priv->irq_tested = true;
|
|
return rc;
|
|
}
|
|
|
|
struct tis_vendor_timeout_override {
|
|
u32 did_vid;
|
|
unsigned long timeout_us[4];
|
|
};
|
|
|
|
static const struct tis_vendor_timeout_override vendor_timeout_overrides[] = {
|
|
/* Atmel 3204 */
|
|
{ 0x32041114, { (TIS_SHORT_TIMEOUT*1000), (TIS_LONG_TIMEOUT*1000),
|
|
(TIS_SHORT_TIMEOUT*1000), (TIS_SHORT_TIMEOUT*1000) } },
|
|
};
|
|
|
|
static bool tpm_tis_update_timeouts(struct tpm_chip *chip,
|
|
unsigned long *timeout_cap)
|
|
{
|
|
int i;
|
|
u32 did_vid;
|
|
|
|
did_vid = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
|
|
|
|
for (i = 0; i != ARRAY_SIZE(vendor_timeout_overrides); i++) {
|
|
if (vendor_timeout_overrides[i].did_vid != did_vid)
|
|
continue;
|
|
memcpy(timeout_cap, vendor_timeout_overrides[i].timeout_us,
|
|
sizeof(vendor_timeout_overrides[i].timeout_us));
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* Early probing for iTPM with STS_DATA_EXPECT flaw.
|
|
* Try sending command without itpm flag set and if that
|
|
* fails, repeat with itpm flag set.
|
|
*/
|
|
static int probe_itpm(struct tpm_chip *chip)
|
|
{
|
|
int rc = 0;
|
|
u8 cmd_getticks[] = {
|
|
0x00, 0xc1, 0x00, 0x00, 0x00, 0x0a,
|
|
0x00, 0x00, 0x00, 0xf1
|
|
};
|
|
size_t len = sizeof(cmd_getticks);
|
|
bool rem_itpm = itpm;
|
|
u16 vendor = ioread16(chip->vendor.iobase + TPM_DID_VID(0));
|
|
|
|
/* probe only iTPMS */
|
|
if (vendor != TPM_VID_INTEL)
|
|
return 0;
|
|
|
|
itpm = false;
|
|
|
|
rc = tpm_tis_send_data(chip, cmd_getticks, len);
|
|
if (rc == 0)
|
|
goto out;
|
|
|
|
tpm_tis_ready(chip);
|
|
release_locality(chip, chip->vendor.locality, 0);
|
|
|
|
itpm = true;
|
|
|
|
rc = tpm_tis_send_data(chip, cmd_getticks, len);
|
|
if (rc == 0) {
|
|
dev_info(chip->pdev, "Detected an iTPM.\n");
|
|
rc = 1;
|
|
} else
|
|
rc = -EFAULT;
|
|
|
|
out:
|
|
itpm = rem_itpm;
|
|
tpm_tis_ready(chip);
|
|
release_locality(chip, chip->vendor.locality, 0);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status)
|
|
{
|
|
switch (chip->vendor.manufacturer_id) {
|
|
case TPM_VID_WINBOND:
|
|
return ((status == TPM_STS_VALID) ||
|
|
(status == (TPM_STS_VALID | TPM_STS_COMMAND_READY)));
|
|
case TPM_VID_STM:
|
|
return (status == (TPM_STS_VALID | TPM_STS_COMMAND_READY));
|
|
default:
|
|
return (status == TPM_STS_COMMAND_READY);
|
|
}
|
|
}
|
|
|
|
static const struct tpm_class_ops tpm_tis = {
|
|
.status = tpm_tis_status,
|
|
.recv = tpm_tis_recv,
|
|
.send = tpm_tis_send,
|
|
.cancel = tpm_tis_ready,
|
|
.update_timeouts = tpm_tis_update_timeouts,
|
|
.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
|
|
.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
|
|
.req_canceled = tpm_tis_req_canceled,
|
|
};
|
|
|
|
static irqreturn_t tis_int_handler(int dummy, void *dev_id)
|
|
{
|
|
struct tpm_chip *chip = dev_id;
|
|
u32 interrupt;
|
|
int i;
|
|
|
|
interrupt = ioread32(chip->vendor.iobase +
|
|
TPM_INT_STATUS(chip->vendor.locality));
|
|
|
|
if (interrupt == 0)
|
|
return IRQ_NONE;
|
|
|
|
((struct priv_data *)chip->vendor.priv)->irq_tested = true;
|
|
if (interrupt & TPM_INTF_DATA_AVAIL_INT)
|
|
wake_up_interruptible(&chip->vendor.read_queue);
|
|
if (interrupt & TPM_INTF_LOCALITY_CHANGE_INT)
|
|
for (i = 0; i < 5; i++)
|
|
if (check_locality(chip, i) >= 0)
|
|
break;
|
|
if (interrupt &
|
|
(TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_STS_VALID_INT |
|
|
TPM_INTF_CMD_READY_INT))
|
|
wake_up_interruptible(&chip->vendor.int_queue);
|
|
|
|
/* Clear interrupts handled with TPM_EOI */
|
|
iowrite32(interrupt,
|
|
chip->vendor.iobase +
|
|
TPM_INT_STATUS(chip->vendor.locality));
|
|
ioread32(chip->vendor.iobase + TPM_INT_STATUS(chip->vendor.locality));
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Register the IRQ and issue a command that will cause an interrupt. If an
|
|
* irq is seen then leave the chip setup for IRQ operation, otherwise reverse
|
|
* everything and leave in polling mode. Returns 0 on success.
|
|
*/
|
|
static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask,
|
|
int flags, int irq)
|
|
{
|
|
struct priv_data *priv = chip->vendor.priv;
|
|
u8 original_int_vec;
|
|
|
|
if (devm_request_irq(chip->pdev, irq, tis_int_handler, flags,
|
|
chip->devname, chip) != 0) {
|
|
dev_info(chip->pdev, "Unable to request irq: %d for probe\n",
|
|
irq);
|
|
return -1;
|
|
}
|
|
chip->vendor.irq = irq;
|
|
|
|
original_int_vec = ioread8(chip->vendor.iobase +
|
|
TPM_INT_VECTOR(chip->vendor.locality));
|
|
iowrite8(irq,
|
|
chip->vendor.iobase + TPM_INT_VECTOR(chip->vendor.locality));
|
|
|
|
/* Clear all existing */
|
|
iowrite32(ioread32(chip->vendor.iobase +
|
|
TPM_INT_STATUS(chip->vendor.locality)),
|
|
chip->vendor.iobase + TPM_INT_STATUS(chip->vendor.locality));
|
|
|
|
/* Turn on */
|
|
iowrite32(intmask | TPM_GLOBAL_INT_ENABLE,
|
|
chip->vendor.iobase + TPM_INT_ENABLE(chip->vendor.locality));
|
|
|
|
priv->irq_tested = false;
|
|
|
|
/* Generate an interrupt by having the core call through to
|
|
* tpm_tis_send
|
|
*/
|
|
if (chip->flags & TPM_CHIP_FLAG_TPM2)
|
|
tpm2_gen_interrupt(chip);
|
|
else
|
|
tpm_gen_interrupt(chip);
|
|
|
|
/* tpm_tis_send will either confirm the interrupt is working or it
|
|
* will call disable_irq which undoes all of the above.
|
|
*/
|
|
if (!chip->vendor.irq) {
|
|
iowrite8(original_int_vec,
|
|
chip->vendor.iobase +
|
|
TPM_INT_VECTOR(chip->vendor.locality));
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Try to find the IRQ the TPM is using. This is for legacy x86 systems that
|
|
* do not have ACPI/etc. We typically expect the interrupt to be declared if
|
|
* present.
|
|
*/
|
|
static void tpm_tis_probe_irq(struct tpm_chip *chip, u32 intmask)
|
|
{
|
|
u8 original_int_vec;
|
|
int i;
|
|
|
|
original_int_vec = ioread8(chip->vendor.iobase +
|
|
TPM_INT_VECTOR(chip->vendor.locality));
|
|
|
|
if (!original_int_vec) {
|
|
if (IS_ENABLED(CONFIG_X86))
|
|
for (i = 3; i <= 15; i++)
|
|
if (!tpm_tis_probe_irq_single(chip, intmask, 0,
|
|
i))
|
|
return;
|
|
} else if (!tpm_tis_probe_irq_single(chip, intmask, 0,
|
|
original_int_vec))
|
|
return;
|
|
}
|
|
|
|
static bool interrupts = true;
|
|
module_param(interrupts, bool, 0444);
|
|
MODULE_PARM_DESC(interrupts, "Enable interrupts");
|
|
|
|
static void tpm_tis_remove(struct tpm_chip *chip)
|
|
{
|
|
if (chip->flags & TPM_CHIP_FLAG_TPM2)
|
|
tpm2_shutdown(chip, TPM2_SU_CLEAR);
|
|
|
|
iowrite32(~TPM_GLOBAL_INT_ENABLE &
|
|
ioread32(chip->vendor.iobase +
|
|
TPM_INT_ENABLE(chip->vendor.
|
|
locality)),
|
|
chip->vendor.iobase +
|
|
TPM_INT_ENABLE(chip->vendor.locality));
|
|
release_locality(chip, chip->vendor.locality, 1);
|
|
}
|
|
|
|
static int tpm_tis_init(struct device *dev, struct tpm_info *tpm_info,
|
|
acpi_handle acpi_dev_handle)
|
|
{
|
|
u32 vendor, intfcaps, intmask;
|
|
int rc, probe;
|
|
struct tpm_chip *chip;
|
|
struct priv_data *priv;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(struct priv_data), GFP_KERNEL);
|
|
if (priv == NULL)
|
|
return -ENOMEM;
|
|
|
|
chip = tpmm_chip_alloc(dev, &tpm_tis);
|
|
if (IS_ERR(chip))
|
|
return PTR_ERR(chip);
|
|
|
|
chip->vendor.priv = priv;
|
|
#ifdef CONFIG_ACPI
|
|
chip->acpi_dev_handle = acpi_dev_handle;
|
|
#endif
|
|
|
|
chip->vendor.iobase = devm_ioremap_resource(dev, &tpm_info->res);
|
|
if (IS_ERR(chip->vendor.iobase))
|
|
return PTR_ERR(chip->vendor.iobase);
|
|
|
|
/* Maximum timeouts */
|
|
chip->vendor.timeout_a = TIS_TIMEOUT_A_MAX;
|
|
chip->vendor.timeout_b = TIS_TIMEOUT_B_MAX;
|
|
chip->vendor.timeout_c = TIS_TIMEOUT_C_MAX;
|
|
chip->vendor.timeout_d = TIS_TIMEOUT_D_MAX;
|
|
|
|
if (wait_startup(chip, 0) != 0) {
|
|
rc = -ENODEV;
|
|
goto out_err;
|
|
}
|
|
|
|
/* Take control of the TPM's interrupt hardware and shut it off */
|
|
intmask = ioread32(chip->vendor.iobase +
|
|
TPM_INT_ENABLE(chip->vendor.locality));
|
|
intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT |
|
|
TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT;
|
|
intmask &= ~TPM_GLOBAL_INT_ENABLE;
|
|
iowrite32(intmask,
|
|
chip->vendor.iobase + TPM_INT_ENABLE(chip->vendor.locality));
|
|
|
|
if (request_locality(chip, 0) != 0) {
|
|
rc = -ENODEV;
|
|
goto out_err;
|
|
}
|
|
|
|
rc = tpm2_probe(chip);
|
|
if (rc)
|
|
goto out_err;
|
|
|
|
vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
|
|
chip->vendor.manufacturer_id = vendor;
|
|
|
|
dev_info(dev, "%s TPM (device-id 0x%X, rev-id %d)\n",
|
|
(chip->flags & TPM_CHIP_FLAG_TPM2) ? "2.0" : "1.2",
|
|
vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
|
|
|
|
if (!itpm) {
|
|
probe = probe_itpm(chip);
|
|
if (probe < 0) {
|
|
rc = -ENODEV;
|
|
goto out_err;
|
|
}
|
|
itpm = !!probe;
|
|
}
|
|
|
|
if (itpm)
|
|
dev_info(dev, "Intel iTPM workaround enabled\n");
|
|
|
|
|
|
/* Figure out the capabilities */
|
|
intfcaps =
|
|
ioread32(chip->vendor.iobase +
|
|
TPM_INTF_CAPS(chip->vendor.locality));
|
|
dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
|
|
intfcaps);
|
|
if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
|
|
dev_dbg(dev, "\tBurst Count Static\n");
|
|
if (intfcaps & TPM_INTF_CMD_READY_INT)
|
|
dev_dbg(dev, "\tCommand Ready Int Support\n");
|
|
if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
|
|
dev_dbg(dev, "\tInterrupt Edge Falling\n");
|
|
if (intfcaps & TPM_INTF_INT_EDGE_RISING)
|
|
dev_dbg(dev, "\tInterrupt Edge Rising\n");
|
|
if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
|
|
dev_dbg(dev, "\tInterrupt Level Low\n");
|
|
if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
|
|
dev_dbg(dev, "\tInterrupt Level High\n");
|
|
if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT)
|
|
dev_dbg(dev, "\tLocality Change Int Support\n");
|
|
if (intfcaps & TPM_INTF_STS_VALID_INT)
|
|
dev_dbg(dev, "\tSts Valid Int Support\n");
|
|
if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
|
|
dev_dbg(dev, "\tData Avail Int Support\n");
|
|
|
|
/* Very early on issue a command to the TPM in polling mode to make
|
|
* sure it works. May as well use that command to set the proper
|
|
* timeouts for the driver.
|
|
*/
|
|
if (tpm_get_timeouts(chip)) {
|
|
dev_err(dev, "Could not get TPM timeouts and durations\n");
|
|
rc = -ENODEV;
|
|
goto out_err;
|
|
}
|
|
|
|
/* INTERRUPT Setup */
|
|
init_waitqueue_head(&chip->vendor.read_queue);
|
|
init_waitqueue_head(&chip->vendor.int_queue);
|
|
if (interrupts && tpm_info->irq != -1) {
|
|
if (tpm_info->irq) {
|
|
tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
|
|
tpm_info->irq);
|
|
if (!chip->vendor.irq)
|
|
dev_err(chip->pdev, FW_BUG
|
|
"TPM interrupt not working, polling instead\n");
|
|
} else
|
|
tpm_tis_probe_irq(chip, intmask);
|
|
}
|
|
|
|
if (chip->flags & TPM_CHIP_FLAG_TPM2) {
|
|
rc = tpm2_do_selftest(chip);
|
|
if (rc == TPM2_RC_INITIALIZE) {
|
|
dev_warn(dev, "Firmware has not started TPM\n");
|
|
rc = tpm2_startup(chip, TPM2_SU_CLEAR);
|
|
if (!rc)
|
|
rc = tpm2_do_selftest(chip);
|
|
}
|
|
|
|
if (rc) {
|
|
dev_err(dev, "TPM self test failed\n");
|
|
if (rc > 0)
|
|
rc = -ENODEV;
|
|
goto out_err;
|
|
}
|
|
} else {
|
|
if (tpm_do_selftest(chip)) {
|
|
dev_err(dev, "TPM self test failed\n");
|
|
rc = -ENODEV;
|
|
goto out_err;
|
|
}
|
|
}
|
|
|
|
return tpm_chip_register(chip);
|
|
out_err:
|
|
tpm_tis_remove(chip);
|
|
return rc;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
|
|
{
|
|
u32 intmask;
|
|
|
|
/* reenable interrupts that device may have lost or
|
|
BIOS/firmware may have disabled */
|
|
iowrite8(chip->vendor.irq, chip->vendor.iobase +
|
|
TPM_INT_VECTOR(chip->vendor.locality));
|
|
|
|
intmask =
|
|
ioread32(chip->vendor.iobase +
|
|
TPM_INT_ENABLE(chip->vendor.locality));
|
|
|
|
intmask |= TPM_INTF_CMD_READY_INT
|
|
| TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT
|
|
| TPM_INTF_STS_VALID_INT | TPM_GLOBAL_INT_ENABLE;
|
|
|
|
iowrite32(intmask,
|
|
chip->vendor.iobase + TPM_INT_ENABLE(chip->vendor.locality));
|
|
}
|
|
|
|
static int tpm_tis_resume(struct device *dev)
|
|
{
|
|
struct tpm_chip *chip = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
if (chip->vendor.irq)
|
|
tpm_tis_reenable_interrupts(chip);
|
|
|
|
ret = tpm_pm_resume(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* TPM 1.2 requires self-test on resume. This function actually returns
|
|
* an error code but for unknown reason it isn't handled.
|
|
*/
|
|
if (!(chip->flags & TPM_CHIP_FLAG_TPM2))
|
|
tpm_do_selftest(chip);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(tpm_tis_pm, tpm_pm_suspend, tpm_tis_resume);
|
|
|
|
static int tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
|
|
const struct pnp_device_id *pnp_id)
|
|
{
|
|
struct tpm_info tpm_info = {};
|
|
acpi_handle acpi_dev_handle = NULL;
|
|
struct resource *res;
|
|
|
|
res = pnp_get_resource(pnp_dev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -ENODEV;
|
|
tpm_info.res = *res;
|
|
|
|
if (pnp_irq_valid(pnp_dev, 0))
|
|
tpm_info.irq = pnp_irq(pnp_dev, 0);
|
|
else
|
|
tpm_info.irq = -1;
|
|
|
|
if (pnp_acpi_device(pnp_dev)) {
|
|
if (is_itpm(pnp_acpi_device(pnp_dev)))
|
|
itpm = true;
|
|
|
|
acpi_dev_handle = ACPI_HANDLE(&pnp_dev->dev);
|
|
}
|
|
|
|
return tpm_tis_init(&pnp_dev->dev, &tpm_info, acpi_dev_handle);
|
|
}
|
|
|
|
static struct pnp_device_id tpm_pnp_tbl[] = {
|
|
{"PNP0C31", 0}, /* TPM */
|
|
{"ATM1200", 0}, /* Atmel */
|
|
{"IFX0102", 0}, /* Infineon */
|
|
{"BCM0101", 0}, /* Broadcom */
|
|
{"BCM0102", 0}, /* Broadcom */
|
|
{"NSC1200", 0}, /* National */
|
|
{"ICO0102", 0}, /* Intel */
|
|
/* Add new here */
|
|
{"", 0}, /* User Specified */
|
|
{"", 0} /* Terminator */
|
|
};
|
|
MODULE_DEVICE_TABLE(pnp, tpm_pnp_tbl);
|
|
|
|
static void tpm_tis_pnp_remove(struct pnp_dev *dev)
|
|
{
|
|
struct tpm_chip *chip = pnp_get_drvdata(dev);
|
|
|
|
tpm_chip_unregister(chip);
|
|
tpm_tis_remove(chip);
|
|
}
|
|
|
|
static struct pnp_driver tis_pnp_driver = {
|
|
.name = "tpm_tis",
|
|
.id_table = tpm_pnp_tbl,
|
|
.probe = tpm_tis_pnp_init,
|
|
.remove = tpm_tis_pnp_remove,
|
|
.driver = {
|
|
.pm = &tpm_tis_pm,
|
|
},
|
|
};
|
|
|
|
#define TIS_HID_USR_IDX sizeof(tpm_pnp_tbl)/sizeof(struct pnp_device_id) -2
|
|
module_param_string(hid, tpm_pnp_tbl[TIS_HID_USR_IDX].id,
|
|
sizeof(tpm_pnp_tbl[TIS_HID_USR_IDX].id), 0444);
|
|
MODULE_PARM_DESC(hid, "Set additional specific HID for this driver to probe");
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static int tpm_check_resource(struct acpi_resource *ares, void *data)
|
|
{
|
|
struct tpm_info *tpm_info = (struct tpm_info *) data;
|
|
struct resource res;
|
|
|
|
if (acpi_dev_resource_interrupt(ares, 0, &res))
|
|
tpm_info->irq = res.start;
|
|
else if (acpi_dev_resource_memory(ares, &res)) {
|
|
tpm_info->res = res;
|
|
tpm_info->res.name = NULL;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int tpm_tis_acpi_init(struct acpi_device *acpi_dev)
|
|
{
|
|
struct acpi_table_tpm2 *tbl;
|
|
acpi_status st;
|
|
struct list_head resources;
|
|
struct tpm_info tpm_info = {};
|
|
int ret;
|
|
|
|
st = acpi_get_table(ACPI_SIG_TPM2, 1,
|
|
(struct acpi_table_header **) &tbl);
|
|
if (ACPI_FAILURE(st) || tbl->header.length < sizeof(*tbl)) {
|
|
dev_err(&acpi_dev->dev,
|
|
FW_BUG "failed to get TPM2 ACPI table\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (tbl->start_method != ACPI_TPM2_MEMORY_MAPPED)
|
|
return -ENODEV;
|
|
|
|
INIT_LIST_HEAD(&resources);
|
|
tpm_info.irq = -1;
|
|
ret = acpi_dev_get_resources(acpi_dev, &resources, tpm_check_resource,
|
|
&tpm_info);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
acpi_dev_free_resource_list(&resources);
|
|
|
|
if (resource_type(&tpm_info.res) != IORESOURCE_MEM) {
|
|
dev_err(&acpi_dev->dev,
|
|
FW_BUG "TPM2 ACPI table does not define a memory resource\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (is_itpm(acpi_dev))
|
|
itpm = true;
|
|
|
|
return tpm_tis_init(&acpi_dev->dev, &tpm_info, acpi_dev->handle);
|
|
}
|
|
|
|
static int tpm_tis_acpi_remove(struct acpi_device *dev)
|
|
{
|
|
struct tpm_chip *chip = dev_get_drvdata(&dev->dev);
|
|
|
|
tpm_chip_unregister(chip);
|
|
tpm_tis_remove(chip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct acpi_device_id tpm_acpi_tbl[] = {
|
|
{"MSFT0101", 0}, /* TPM 2.0 */
|
|
/* Add new here */
|
|
{"", 0}, /* User Specified */
|
|
{"", 0} /* Terminator */
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, tpm_acpi_tbl);
|
|
|
|
static struct acpi_driver tis_acpi_driver = {
|
|
.name = "tpm_tis",
|
|
.ids = tpm_acpi_tbl,
|
|
.ops = {
|
|
.add = tpm_tis_acpi_init,
|
|
.remove = tpm_tis_acpi_remove,
|
|
},
|
|
.drv = {
|
|
.pm = &tpm_tis_pm,
|
|
},
|
|
};
|
|
#endif
|
|
|
|
static struct platform_device *force_pdev;
|
|
|
|
static int tpm_tis_plat_probe(struct platform_device *pdev)
|
|
{
|
|
struct tpm_info tpm_info = {};
|
|
struct resource *res;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (res == NULL) {
|
|
dev_err(&pdev->dev, "no memory resource defined\n");
|
|
return -ENODEV;
|
|
}
|
|
tpm_info.res = *res;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
if (res) {
|
|
tpm_info.irq = res->start;
|
|
} else {
|
|
if (pdev == force_pdev)
|
|
tpm_info.irq = -1;
|
|
else
|
|
/* When forcing auto probe the IRQ */
|
|
tpm_info.irq = 0;
|
|
}
|
|
|
|
return tpm_tis_init(&pdev->dev, &tpm_info, NULL);
|
|
}
|
|
|
|
static int tpm_tis_plat_remove(struct platform_device *pdev)
|
|
{
|
|
struct tpm_chip *chip = dev_get_drvdata(&pdev->dev);
|
|
|
|
tpm_chip_unregister(chip);
|
|
tpm_tis_remove(chip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver tis_drv = {
|
|
.probe = tpm_tis_plat_probe,
|
|
.remove = tpm_tis_plat_remove,
|
|
.driver = {
|
|
.name = "tpm_tis",
|
|
.pm = &tpm_tis_pm,
|
|
},
|
|
};
|
|
|
|
static bool force;
|
|
#ifdef CONFIG_X86
|
|
module_param(force, bool, 0444);
|
|
MODULE_PARM_DESC(force, "Force device probe rather than using ACPI entry");
|
|
#endif
|
|
|
|
static int tpm_tis_force_device(void)
|
|
{
|
|
struct platform_device *pdev;
|
|
static const struct resource x86_resources[] = {
|
|
{
|
|
.start = 0xFED40000,
|
|
.end = 0xFED40000 + TIS_MEM_LEN - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
if (!force)
|
|
return 0;
|
|
|
|
/* The driver core will match the name tpm_tis of the device to
|
|
* the tpm_tis platform driver and complete the setup via
|
|
* tpm_tis_plat_probe
|
|
*/
|
|
pdev = platform_device_register_simple("tpm_tis", -1, x86_resources,
|
|
ARRAY_SIZE(x86_resources));
|
|
if (IS_ERR(pdev))
|
|
return PTR_ERR(pdev);
|
|
force_pdev = pdev;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init init_tis(void)
|
|
{
|
|
int rc;
|
|
|
|
rc = tpm_tis_force_device();
|
|
if (rc)
|
|
goto err_force;
|
|
|
|
rc = platform_driver_register(&tis_drv);
|
|
if (rc)
|
|
goto err_platform;
|
|
|
|
#ifdef CONFIG_ACPI
|
|
rc = acpi_bus_register_driver(&tis_acpi_driver);
|
|
if (rc)
|
|
goto err_acpi;
|
|
#endif
|
|
|
|
if (IS_ENABLED(CONFIG_PNP)) {
|
|
rc = pnp_register_driver(&tis_pnp_driver);
|
|
if (rc)
|
|
goto err_pnp;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_pnp:
|
|
#ifdef CONFIG_ACPI
|
|
acpi_bus_unregister_driver(&tis_acpi_driver);
|
|
err_acpi:
|
|
#endif
|
|
platform_device_unregister(force_pdev);
|
|
err_platform:
|
|
if (force_pdev)
|
|
platform_device_unregister(force_pdev);
|
|
err_force:
|
|
return rc;
|
|
}
|
|
|
|
static void __exit cleanup_tis(void)
|
|
{
|
|
pnp_unregister_driver(&tis_pnp_driver);
|
|
#ifdef CONFIG_ACPI
|
|
acpi_bus_unregister_driver(&tis_acpi_driver);
|
|
#endif
|
|
platform_driver_unregister(&tis_drv);
|
|
|
|
if (force_pdev)
|
|
platform_device_unregister(force_pdev);
|
|
}
|
|
|
|
module_init(init_tis);
|
|
module_exit(cleanup_tis);
|
|
MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)");
|
|
MODULE_DESCRIPTION("TPM Driver");
|
|
MODULE_VERSION("2.0");
|
|
MODULE_LICENSE("GPL");
|