linux/Documentation/hwmon/ltc2992.rst

57 lines
1.7 KiB
ReStructuredText
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

.. SPDX-License-Identifier: GPL-2.0
Kernel driver ltc2992
=====================
Supported chips:
* Linear Technology LTC2992
Prefix: 'ltc2992'
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2992.pdf
Author: Alexandru Tachici <alexandru.tachici@analog.com>
Description
-----------
This driver supports hardware monitoring for Linear Technology LTC2992 power monitor.
LTC2992 is a rail-to-rail system monitor that measures current,
voltage, and power of two supplies.
Two ADCs simultaneously measure each supplys current. A third ADC monitors
the input voltages and four auxiliary external voltages.
Sysfs entries
-------------
The following attributes are supported. Limits are read-write,
all other attributes are read-only.
in_reset_history Reset all highest/lowest values.
inX_input Measured voltage.
inX_lowest Minimum measured voltage.
inX_highest Maximum measured voltage.
inX_min Minimum voltage allowed.
inX_max Maximum voltage allowed.
inX_min_alarm An undervoltage occurred. Cleared on read.
inX_max_alarm An overvoltage occurred. Cleared on read.
currX_input Measured current.
currX_lowest Minimum measured current.
currX_highest Maximum measured current.
currX_min Minimum current allowed.
currX_max Maximum current allowed.
currX_min_alarm An undercurrent occurred. Cleared on read.
currX_max_alarm An overcurrent occurred. Cleared on read.
powerX_input Measured power.
powerX_input_lowest Minimum measured voltage.
powerX_input_highest Maximum measured voltage.
powerX_min Minimum power.
powerX_max Maximum power.
powerX_min_alarm An underpower occurred. Cleared on read.
powerX_max_alarm An overpower occurred. Cleared on read.