mirror of https://gitee.com/openkylin/linux.git
e4a1d8467d
Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> |
||
---|---|---|
.. | ||
armada | ||
ast | ||
bochs | ||
bridge | ||
cirrus | ||
exynos | ||
gma500 | ||
i2c | ||
i810 | ||
i915 | ||
mga | ||
mgag200 | ||
msm | ||
nouveau | ||
omapdrm | ||
panel | ||
qxl | ||
r128 | ||
radeon | ||
rcar-du | ||
savage | ||
shmobile | ||
sis | ||
tdfx | ||
tegra | ||
tilcdc | ||
ttm | ||
udl | ||
via | ||
vmwgfx | ||
Kconfig | ||
Makefile | ||
README.drm | ||
ati_pcigart.c | ||
drm_agpsupport.c | ||
drm_auth.c | ||
drm_buffer.c | ||
drm_bufs.c | ||
drm_cache.c | ||
drm_context.c | ||
drm_crtc.c | ||
drm_crtc_helper.c | ||
drm_crtc_internal.h | ||
drm_debugfs.c | ||
drm_dma.c | ||
drm_dp_helper.c | ||
drm_drv.c | ||
drm_edid.c | ||
drm_edid_load.c | ||
drm_encoder_slave.c | ||
drm_fb_cma_helper.c | ||
drm_fb_helper.c | ||
drm_flip_work.c | ||
drm_fops.c | ||
drm_gem.c | ||
drm_gem_cma_helper.c | ||
drm_global.c | ||
drm_hashtab.c | ||
drm_info.c | ||
drm_ioc32.c | ||
drm_ioctl.c | ||
drm_irq.c | ||
drm_lock.c | ||
drm_memory.c | ||
drm_mipi_dsi.c | ||
drm_mm.c | ||
drm_modes.c | ||
drm_panel.c | ||
drm_pci.c | ||
drm_plane_helper.c | ||
drm_platform.c | ||
drm_prime.c | ||
drm_probe_helper.c | ||
drm_rect.c | ||
drm_scatter.c | ||
drm_stub.c | ||
drm_sysfs.c | ||
drm_trace.h | ||
drm_trace_points.c | ||
drm_usb.c | ||
drm_vm.c | ||
drm_vma_manager.c |
README.drm
************************************************************ * For the very latest on DRI development, please see: * * http://dri.freedesktop.org/ * ************************************************************ The Direct Rendering Manager (drm) is a device-independent kernel-level device driver that provides support for the XFree86 Direct Rendering Infrastructure (DRI). The DRM supports the Direct Rendering Infrastructure (DRI) in four major ways: 1. The DRM provides synchronized access to the graphics hardware via the use of an optimized two-tiered lock. 2. The DRM enforces the DRI security policy for access to the graphics hardware by only allowing authenticated X11 clients access to restricted regions of memory. 3. The DRM provides a generic DMA engine, complete with multiple queues and the ability to detect the need for an OpenGL context switch. 4. The DRM is extensible via the use of small device-specific modules that rely extensively on the API exported by the DRM module. Documentation on the DRI is available from: http://dri.freedesktop.org/wiki/Documentation http://sourceforge.net/project/showfiles.php?group_id=387 http://dri.sourceforge.net/doc/ For specific information about kernel-level support, see: The Direct Rendering Manager, Kernel Support for the Direct Rendering Infrastructure http://dri.sourceforge.net/doc/drm_low_level.html Hardware Locking for the Direct Rendering Infrastructure http://dri.sourceforge.net/doc/hardware_locking_low_level.html A Security Analysis of the Direct Rendering Infrastructure http://dri.sourceforge.net/doc/security_low_level.html