mirror of https://gitee.com/openkylin/linux.git
226 lines
5.2 KiB
C
226 lines
5.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* IIO ADC driver for NXP LPC18xx ADC
|
|
*
|
|
* Copyright (C) 2016 Joachim Eastwood <manabian@gmail.com>
|
|
*
|
|
* UNSUPPORTED hardware features:
|
|
* - Hardware triggers
|
|
* - Burst mode
|
|
* - Interrupts
|
|
* - DMA
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
/* LPC18XX ADC registers and bits */
|
|
#define LPC18XX_ADC_CR 0x000
|
|
#define LPC18XX_ADC_CR_CLKDIV_SHIFT 8
|
|
#define LPC18XX_ADC_CR_PDN BIT(21)
|
|
#define LPC18XX_ADC_CR_START_NOW (0x1 << 24)
|
|
#define LPC18XX_ADC_GDR 0x004
|
|
|
|
/* Data register bits */
|
|
#define LPC18XX_ADC_SAMPLE_SHIFT 6
|
|
#define LPC18XX_ADC_SAMPLE_MASK 0x3ff
|
|
#define LPC18XX_ADC_CONV_DONE BIT(31)
|
|
|
|
/* Clock should be 4.5 MHz or less */
|
|
#define LPC18XX_ADC_CLK_TARGET 4500000
|
|
|
|
struct lpc18xx_adc {
|
|
struct regulator *vref;
|
|
void __iomem *base;
|
|
struct device *dev;
|
|
struct mutex lock;
|
|
struct clk *clk;
|
|
u32 cr_reg;
|
|
};
|
|
|
|
#define LPC18XX_ADC_CHAN(_idx) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.channel = _idx, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
}
|
|
|
|
static const struct iio_chan_spec lpc18xx_adc_iio_channels[] = {
|
|
LPC18XX_ADC_CHAN(0),
|
|
LPC18XX_ADC_CHAN(1),
|
|
LPC18XX_ADC_CHAN(2),
|
|
LPC18XX_ADC_CHAN(3),
|
|
LPC18XX_ADC_CHAN(4),
|
|
LPC18XX_ADC_CHAN(5),
|
|
LPC18XX_ADC_CHAN(6),
|
|
LPC18XX_ADC_CHAN(7),
|
|
};
|
|
|
|
static int lpc18xx_adc_read_chan(struct lpc18xx_adc *adc, unsigned int ch)
|
|
{
|
|
int ret;
|
|
u32 reg;
|
|
|
|
reg = adc->cr_reg | BIT(ch) | LPC18XX_ADC_CR_START_NOW;
|
|
writel(reg, adc->base + LPC18XX_ADC_CR);
|
|
|
|
ret = readl_poll_timeout(adc->base + LPC18XX_ADC_GDR, reg,
|
|
reg & LPC18XX_ADC_CONV_DONE, 3, 9);
|
|
if (ret) {
|
|
dev_warn(adc->dev, "adc read timed out\n");
|
|
return ret;
|
|
}
|
|
|
|
return (reg >> LPC18XX_ADC_SAMPLE_SHIFT) & LPC18XX_ADC_SAMPLE_MASK;
|
|
}
|
|
|
|
static int lpc18xx_adc_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct lpc18xx_adc *adc = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
mutex_lock(&adc->lock);
|
|
*val = lpc18xx_adc_read_chan(adc, chan->channel);
|
|
mutex_unlock(&adc->lock);
|
|
if (*val < 0)
|
|
return *val;
|
|
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = regulator_get_voltage(adc->vref) / 1000;
|
|
*val2 = 10;
|
|
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct iio_info lpc18xx_adc_info = {
|
|
.read_raw = lpc18xx_adc_read_raw,
|
|
};
|
|
|
|
static int lpc18xx_adc_probe(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct lpc18xx_adc *adc;
|
|
unsigned int clkdiv;
|
|
unsigned long rate;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
adc = iio_priv(indio_dev);
|
|
adc->dev = &pdev->dev;
|
|
mutex_init(&adc->lock);
|
|
|
|
adc->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(adc->base))
|
|
return PTR_ERR(adc->base);
|
|
|
|
adc->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(adc->clk)) {
|
|
dev_err(&pdev->dev, "error getting clock\n");
|
|
return PTR_ERR(adc->clk);
|
|
}
|
|
|
|
rate = clk_get_rate(adc->clk);
|
|
clkdiv = DIV_ROUND_UP(rate, LPC18XX_ADC_CLK_TARGET);
|
|
|
|
adc->vref = devm_regulator_get(&pdev->dev, "vref");
|
|
if (IS_ERR(adc->vref)) {
|
|
dev_err(&pdev->dev, "error getting regulator\n");
|
|
return PTR_ERR(adc->vref);
|
|
}
|
|
|
|
indio_dev->name = dev_name(&pdev->dev);
|
|
indio_dev->dev.parent = &pdev->dev;
|
|
indio_dev->info = &lpc18xx_adc_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = lpc18xx_adc_iio_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(lpc18xx_adc_iio_channels);
|
|
|
|
ret = regulator_enable(adc->vref);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to enable regulator\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(adc->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to enable clock\n");
|
|
goto dis_reg;
|
|
}
|
|
|
|
adc->cr_reg = (clkdiv << LPC18XX_ADC_CR_CLKDIV_SHIFT) |
|
|
LPC18XX_ADC_CR_PDN;
|
|
writel(adc->cr_reg, adc->base + LPC18XX_ADC_CR);
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to register device\n");
|
|
goto dis_clk;
|
|
}
|
|
|
|
return 0;
|
|
|
|
dis_clk:
|
|
writel(0, adc->base + LPC18XX_ADC_CR);
|
|
clk_disable_unprepare(adc->clk);
|
|
dis_reg:
|
|
regulator_disable(adc->vref);
|
|
return ret;
|
|
}
|
|
|
|
static int lpc18xx_adc_remove(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
|
struct lpc18xx_adc *adc = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
writel(0, adc->base + LPC18XX_ADC_CR);
|
|
clk_disable_unprepare(adc->clk);
|
|
regulator_disable(adc->vref);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id lpc18xx_adc_match[] = {
|
|
{ .compatible = "nxp,lpc1850-adc" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, lpc18xx_adc_match);
|
|
|
|
static struct platform_driver lpc18xx_adc_driver = {
|
|
.probe = lpc18xx_adc_probe,
|
|
.remove = lpc18xx_adc_remove,
|
|
.driver = {
|
|
.name = "lpc18xx-adc",
|
|
.of_match_table = lpc18xx_adc_match,
|
|
},
|
|
};
|
|
module_platform_driver(lpc18xx_adc_driver);
|
|
|
|
MODULE_DESCRIPTION("LPC18xx ADC driver");
|
|
MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
|
|
MODULE_LICENSE("GPL v2");
|