linux/arch/sh/include/mach-common/mach/sh7785lcr.h

59 lines
1.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SH_RENESAS_SH7785LCR_H
#define __ASM_SH_RENESAS_SH7785LCR_H
/*
* This board has 2 physical memory maps.
* It can be changed with DIP switch(S2-5).
*
* phys address | S2-5 = OFF | S2-5 = ON
* -----------------------------+---------------+---------------
* 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash
* 0x04000000 - 0x05ffffff(CS1) | PLD | PLD
* 0x06000000 - 0x07ffffff(CS1) | I2C | I2C
* 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM
* 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM
* 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107
* 0x14000000 - 0x17ffffff(CS5) | reserved | USB
* 0x18000000 - 0x1bffffff(CS6) | reserved | SD
* 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use)
*
*/
#define NOR_FLASH_ADDR 0x00000000
#define NOR_FLASH_SIZE 0x04000000
#define PLD_BASE_ADDR 0x04000000
#define PLD_PCICR (PLD_BASE_ADDR + 0x00)
#define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02)
#define PLD_LOCALCR (PLD_BASE_ADDR + 0x04)
#define PLD_POFCR (PLD_BASE_ADDR + 0x06)
#define PLD_LEDCR (PLD_BASE_ADDR + 0x08)
#define PLD_SWSR (PLD_BASE_ADDR + 0x0a)
#define PLD_VERSR (PLD_BASE_ADDR + 0x0c)
#define PLD_MMSR (PLD_BASE_ADDR + 0x0e)
#define PCA9564_ADDR 0x06000000 /* I2C */
#define PCA9564_SIZE 0x00000100
#define PCA9564_PROTO_32BIT_ADDR 0x14000000
#define SM107_MEM_ADDR 0x10000000
#define SM107_MEM_SIZE 0x00e00000
#define SM107_REG_ADDR 0x13e00000
#define SM107_REG_SIZE 0x00200000
#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS)
#define R8A66597_ADDR 0x14000000 /* USB */
#define CG200_ADDR 0x18000000 /* SD */
#else
#define R8A66597_ADDR 0x08000000
#define CG200_ADDR 0x0c000000
#endif
#define R8A66597_SIZE 0x00000100
#define CG200_SIZE 0x00010000
#endif /* __ASM_SH_RENESAS_SH7785LCR_H */