mirror of https://gitee.com/openkylin/linux.git
597 lines
26 KiB
ReStructuredText
597 lines
26 KiB
ReStructuredText
======================================
|
|
Coresight - HW Assisted Tracing on ARM
|
|
======================================
|
|
|
|
:Author: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
:Date: September 11th, 2014
|
|
|
|
Introduction
|
|
------------
|
|
|
|
Coresight is an umbrella of technologies allowing for the debugging of ARM
|
|
based SoC. It includes solutions for JTAG and HW assisted tracing. This
|
|
document is concerned with the latter.
|
|
|
|
HW assisted tracing is becoming increasingly useful when dealing with systems
|
|
that have many SoCs and other components like GPU and DMA engines. ARM has
|
|
developed a HW assisted tracing solution by means of different components, each
|
|
being added to a design at synthesis time to cater to specific tracing needs.
|
|
Components are generally categorised as source, link and sinks and are
|
|
(usually) discovered using the AMBA bus.
|
|
|
|
"Sources" generate a compressed stream representing the processor instruction
|
|
path based on tracing scenarios as configured by users. From there the stream
|
|
flows through the coresight system (via ATB bus) using links that are connecting
|
|
the emanating source to a sink(s). Sinks serve as endpoints to the coresight
|
|
implementation, either storing the compressed stream in a memory buffer or
|
|
creating an interface to the outside world where data can be transferred to a
|
|
host without fear of filling up the onboard coresight memory buffer.
|
|
|
|
At typical coresight system would look like this::
|
|
|
|
*****************************************************************
|
|
**************************** AMBA AXI ****************************===||
|
|
***************************************************************** ||
|
|
^ ^ | ||
|
|
| | * **
|
|
0000000 ::::: 0000000 ::::: ::::: @@@@@@@ ||||||||||||
|
|
0 CPU 0<-->: C : 0 CPU 0<-->: C : : C : @ STM @ || System ||
|
|
|->0000000 : T : |->0000000 : T : : T :<--->@@@@@ || Memory ||
|
|
| #######<-->: I : | #######<-->: I : : I : @@@<-| ||||||||||||
|
|
| # ETM # ::::: | # PTM # ::::: ::::: @ |
|
|
| ##### ^ ^ | ##### ^ ! ^ ! . | |||||||||
|
|
| |->### | ! | |->### | ! | ! . | || DAP ||
|
|
| | # | ! | | # | ! | ! . | |||||||||
|
|
| | . | ! | | . | ! | ! . | | |
|
|
| | . | ! | | . | ! | ! . | | *
|
|
| | . | ! | | . | ! | ! . | | SWD/
|
|
| | . | ! | | . | ! | ! . | | JTAG
|
|
*****************************************************************<-|
|
|
*************************** AMBA Debug APB ************************
|
|
*****************************************************************
|
|
| . ! . ! ! . |
|
|
| . * . * * . |
|
|
*****************************************************************
|
|
******************** Cross Trigger Matrix (CTM) *******************
|
|
*****************************************************************
|
|
| . ^ . . |
|
|
| * ! * * |
|
|
*****************************************************************
|
|
****************** AMBA Advanced Trace Bus (ATB) ******************
|
|
*****************************************************************
|
|
| ! =============== |
|
|
| * ===== F =====<---------|
|
|
| ::::::::: ==== U ====
|
|
|-->:: CTI ::<!! === N ===
|
|
| ::::::::: ! == N ==
|
|
| ^ * == E ==
|
|
| ! &&&&&&&&& IIIIIII == L ==
|
|
|------>&& ETB &&<......II I =======
|
|
| ! &&&&&&&&& II I .
|
|
| ! I I .
|
|
| ! I REP I<..........
|
|
| ! I I
|
|
| !!>&&&&&&&&& II I *Source: ARM ltd.
|
|
|------>& TPIU &<......II I DAP = Debug Access Port
|
|
&&&&&&&&& IIIIIII ETM = Embedded Trace Macrocell
|
|
; PTM = Program Trace Macrocell
|
|
; CTI = Cross Trigger Interface
|
|
* ETB = Embedded Trace Buffer
|
|
To trace port TPIU= Trace Port Interface Unit
|
|
SWD = Serial Wire Debug
|
|
|
|
While on target configuration of the components is done via the APB bus,
|
|
all trace data are carried out-of-band on the ATB bus. The CTM provides
|
|
a way to aggregate and distribute signals between CoreSight components.
|
|
|
|
The coresight framework provides a central point to represent, configure and
|
|
manage coresight devices on a platform. This first implementation centers on
|
|
the basic tracing functionality, enabling components such ETM/PTM, funnel,
|
|
replicator, TMC, TPIU and ETB. Future work will enable more
|
|
intricate IP blocks such as STM and CTI.
|
|
|
|
|
|
Acronyms and Classification
|
|
---------------------------
|
|
|
|
Acronyms:
|
|
|
|
PTM:
|
|
Program Trace Macrocell
|
|
ETM:
|
|
Embedded Trace Macrocell
|
|
STM:
|
|
System trace Macrocell
|
|
ETB:
|
|
Embedded Trace Buffer
|
|
ITM:
|
|
Instrumentation Trace Macrocell
|
|
TPIU:
|
|
Trace Port Interface Unit
|
|
TMC-ETR:
|
|
Trace Memory Controller, configured as Embedded Trace Router
|
|
TMC-ETF:
|
|
Trace Memory Controller, configured as Embedded Trace FIFO
|
|
CTI:
|
|
Cross Trigger Interface
|
|
|
|
Classification:
|
|
|
|
Source:
|
|
ETMv3.x ETMv4, PTMv1.0, PTMv1.1, STM, STM500, ITM
|
|
Link:
|
|
Funnel, replicator (intelligent or not), TMC-ETR
|
|
Sinks:
|
|
ETBv1.0, ETB1.1, TPIU, TMC-ETF
|
|
Misc:
|
|
CTI
|
|
|
|
|
|
Device Tree Bindings
|
|
--------------------
|
|
|
|
See Documentation/devicetree/bindings/arm/coresight.txt for details.
|
|
|
|
As of this writing drivers for ITM, STMs and CTIs are not provided but are
|
|
expected to be added as the solution matures.
|
|
|
|
|
|
Framework and implementation
|
|
----------------------------
|
|
|
|
The coresight framework provides a central point to represent, configure and
|
|
manage coresight devices on a platform. Any coresight compliant device can
|
|
register with the framework for as long as they use the right APIs:
|
|
|
|
.. c:function:: struct coresight_device *coresight_register(struct coresight_desc *desc);
|
|
.. c:function:: void coresight_unregister(struct coresight_device *csdev);
|
|
|
|
The registering function is taking a ``struct coresight_desc *desc`` and
|
|
register the device with the core framework. The unregister function takes
|
|
a reference to a ``struct coresight_device *csdev`` obtained at registration time.
|
|
|
|
If everything goes well during the registration process the new devices will
|
|
show up under /sys/bus/coresight/devices, as showns here for a TC2 platform::
|
|
|
|
root:~# ls /sys/bus/coresight/devices/
|
|
replicator 20030000.tpiu 2201c000.ptm 2203c000.etm 2203e000.etm
|
|
20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm
|
|
root:~#
|
|
|
|
The functions take a ``struct coresight_device``, which looks like this::
|
|
|
|
struct coresight_desc {
|
|
enum coresight_dev_type type;
|
|
struct coresight_dev_subtype subtype;
|
|
const struct coresight_ops *ops;
|
|
struct coresight_platform_data *pdata;
|
|
struct device *dev;
|
|
const struct attribute_group **groups;
|
|
};
|
|
|
|
|
|
The "coresight_dev_type" identifies what the device is, i.e, source link or
|
|
sink while the "coresight_dev_subtype" will characterise that type further.
|
|
|
|
The ``struct coresight_ops`` is mandatory and will tell the framework how to
|
|
perform base operations related to the components, each component having
|
|
a different set of requirement. For that ``struct coresight_ops_sink``,
|
|
``struct coresight_ops_link`` and ``struct coresight_ops_source`` have been
|
|
provided.
|
|
|
|
The next field ``struct coresight_platform_data *pdata`` is acquired by calling
|
|
``of_get_coresight_platform_data()``, as part of the driver's _probe routine and
|
|
``struct device *dev`` gets the device reference embedded in the ``amba_device``::
|
|
|
|
static int etm_probe(struct amba_device *adev, const struct amba_id *id)
|
|
{
|
|
...
|
|
...
|
|
drvdata->dev = &adev->dev;
|
|
...
|
|
}
|
|
|
|
Specific class of device (source, link, or sink) have generic operations
|
|
that can be performed on them (see ``struct coresight_ops``). The ``**groups``
|
|
is a list of sysfs entries pertaining to operations
|
|
specific to that component only. "Implementation defined" customisations are
|
|
expected to be accessed and controlled using those entries.
|
|
|
|
Device Naming scheme
|
|
--------------------
|
|
|
|
The devices that appear on the "coresight" bus were named the same as their
|
|
parent devices, i.e, the real devices that appears on AMBA bus or the platform bus.
|
|
Thus the names were based on the Linux Open Firmware layer naming convention,
|
|
which follows the base physical address of the device followed by the device
|
|
type. e.g::
|
|
|
|
root:~# ls /sys/bus/coresight/devices/
|
|
20010000.etf 20040000.funnel 20100000.stm 22040000.etm
|
|
22140000.etm 230c0000.funnel 23240000.etm 20030000.tpiu
|
|
20070000.etr 20120000.replicator 220c0000.funnel
|
|
23040000.etm 23140000.etm 23340000.etm
|
|
|
|
However, with the introduction of ACPI support, the names of the real
|
|
devices are a bit cryptic and non-obvious. Thus, a new naming scheme was
|
|
introduced to use more generic names based on the type of the device. The
|
|
following rules apply::
|
|
|
|
1) Devices that are bound to CPUs, are named based on the CPU logical
|
|
number.
|
|
|
|
e.g, ETM bound to CPU0 is named "etm0"
|
|
|
|
2) All other devices follow a pattern, "<device_type_prefix>N", where :
|
|
|
|
<device_type_prefix> - A prefix specific to the type of the device
|
|
N - a sequential number assigned based on the order
|
|
of probing.
|
|
|
|
e.g, tmc_etf0, tmc_etr0, funnel0, funnel1
|
|
|
|
Thus, with the new scheme the devices could appear as ::
|
|
|
|
root:~# ls /sys/bus/coresight/devices/
|
|
etm0 etm1 etm2 etm3 etm4 etm5 funnel0
|
|
funnel1 funnel2 replicator0 stm0 tmc_etf0 tmc_etr0 tpiu0
|
|
|
|
Some of the examples below might refer to old naming scheme and some
|
|
to the newer scheme, to give a confirmation that what you see on your
|
|
system is not unexpected. One must use the "names" as they appear on
|
|
the system under specified locations.
|
|
|
|
Topology Representation
|
|
-----------------------
|
|
|
|
Each CoreSight component has a ``connections`` directory which will contain
|
|
links to other CoreSight components. This allows the user to explore the trace
|
|
topology and for larger systems, determine the most appropriate sink for a
|
|
given source. The connection information can also be used to establish
|
|
which CTI devices are connected to a given component. This directory contains a
|
|
``nr_links`` attribute detailing the number of links in the directory.
|
|
|
|
For an ETM source, in this case ``etm0`` on a Juno platform, a typical
|
|
arrangement will be::
|
|
|
|
linaro-developer:~# ls - l /sys/bus/coresight/devices/etm0/connections
|
|
<file details> cti_cpu0 -> ../../../23020000.cti/cti_cpu0
|
|
<file details> nr_links
|
|
<file details> out:0 -> ../../../230c0000.funnel/funnel2
|
|
|
|
Following the out port to ``funnel2``::
|
|
|
|
linaro-developer:~# ls -l /sys/bus/coresight/devices/funnel2/connections
|
|
<file details> in:0 -> ../../../23040000.etm/etm0
|
|
<file details> in:1 -> ../../../23140000.etm/etm3
|
|
<file details> in:2 -> ../../../23240000.etm/etm4
|
|
<file details> in:3 -> ../../../23340000.etm/etm5
|
|
<file details> nr_links
|
|
<file details> out:0 -> ../../../20040000.funnel/funnel0
|
|
|
|
And again to ``funnel0``::
|
|
|
|
linaro-developer:~# ls -l /sys/bus/coresight/devices/funnel0/connections
|
|
<file details> in:0 -> ../../../220c0000.funnel/funnel1
|
|
<file details> in:1 -> ../../../230c0000.funnel/funnel2
|
|
<file details> nr_links
|
|
<file details> out:0 -> ../../../20010000.etf/tmc_etf0
|
|
|
|
Finding the first sink ``tmc_etf0``. This can be used to collect data
|
|
as a sink, or as a link to propagate further along the chain::
|
|
|
|
linaro-developer:~# ls -l /sys/bus/coresight/devices/tmc_etf0/connections
|
|
<file details> cti_sys0 -> ../../../20020000.cti/cti_sys0
|
|
<file details> in:0 -> ../../../20040000.funnel/funnel0
|
|
<file details> nr_links
|
|
<file details> out:0 -> ../../../20150000.funnel/funnel4
|
|
|
|
via ``funnel4``::
|
|
|
|
linaro-developer:~# ls -l /sys/bus/coresight/devices/funnel4/connections
|
|
<file details> in:0 -> ../../../20010000.etf/tmc_etf0
|
|
<file details> in:1 -> ../../../20140000.etf/tmc_etf1
|
|
<file details> nr_links
|
|
<file details> out:0 -> ../../../20120000.replicator/replicator0
|
|
|
|
and a ``replicator0``::
|
|
|
|
linaro-developer:~# ls -l /sys/bus/coresight/devices/replicator0/connections
|
|
<file details> in:0 -> ../../../20150000.funnel/funnel4
|
|
<file details> nr_links
|
|
<file details> out:0 -> ../../../20030000.tpiu/tpiu0
|
|
<file details> out:1 -> ../../../20070000.etr/tmc_etr0
|
|
|
|
Arriving at the final sink in the chain, ``tmc_etr0``::
|
|
|
|
linaro-developer:~# ls -l /sys/bus/coresight/devices/tmc_etr0/connections
|
|
<file details> cti_sys0 -> ../../../20020000.cti/cti_sys0
|
|
<file details> in:0 -> ../../../20120000.replicator/replicator0
|
|
<file details> nr_links
|
|
|
|
As described below, when using sysfs it is sufficient to enable a sink and
|
|
a source for successful trace. The framework will correctly enable all
|
|
intermediate links as required.
|
|
|
|
Note: ``cti_sys0`` appears in two of the connections lists above.
|
|
CTIs can connect to multiple devices and are arranged in a star topology
|
|
via the CTM. See (:doc:`coresight-ect`) [#fourth]_ for further details.
|
|
Looking at this device we see 4 connections::
|
|
|
|
linaro-developer:~# ls -l /sys/bus/coresight/devices/cti_sys0/connections
|
|
<file details> nr_links
|
|
<file details> stm0 -> ../../../20100000.stm/stm0
|
|
<file details> tmc_etf0 -> ../../../20010000.etf/tmc_etf0
|
|
<file details> tmc_etr0 -> ../../../20070000.etr/tmc_etr0
|
|
<file details> tpiu0 -> ../../../20030000.tpiu/tpiu0
|
|
|
|
|
|
How to use the tracer modules
|
|
-----------------------------
|
|
|
|
There are two ways to use the Coresight framework:
|
|
|
|
1. using the perf cmd line tools.
|
|
2. interacting directly with the Coresight devices using the sysFS interface.
|
|
|
|
Preference is given to the former as using the sysFS interface
|
|
requires a deep understanding of the Coresight HW. The following sections
|
|
provide details on using both methods.
|
|
|
|
1) Using the sysFS interface:
|
|
|
|
Before trace collection can start, a coresight sink needs to be identified.
|
|
There is no limit on the amount of sinks (nor sources) that can be enabled at
|
|
any given moment. As a generic operation, all device pertaining to the sink
|
|
class will have an "active" entry in sysfs::
|
|
|
|
root:/sys/bus/coresight/devices# ls
|
|
replicator 20030000.tpiu 2201c000.ptm 2203c000.etm 2203e000.etm
|
|
20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm
|
|
root:/sys/bus/coresight/devices# ls 20010000.etb
|
|
enable_sink status trigger_cntr
|
|
root:/sys/bus/coresight/devices# echo 1 > 20010000.etb/enable_sink
|
|
root:/sys/bus/coresight/devices# cat 20010000.etb/enable_sink
|
|
1
|
|
root:/sys/bus/coresight/devices#
|
|
|
|
At boot time the current etm3x driver will configure the first address
|
|
comparator with "_stext" and "_etext", essentially tracing any instruction
|
|
that falls within that range. As such "enabling" a source will immediately
|
|
trigger a trace capture::
|
|
|
|
root:/sys/bus/coresight/devices# echo 1 > 2201c000.ptm/enable_source
|
|
root:/sys/bus/coresight/devices# cat 2201c000.ptm/enable_source
|
|
1
|
|
root:/sys/bus/coresight/devices# cat 20010000.etb/status
|
|
Depth: 0x2000
|
|
Status: 0x1
|
|
RAM read ptr: 0x0
|
|
RAM wrt ptr: 0x19d3 <----- The write pointer is moving
|
|
Trigger cnt: 0x0
|
|
Control: 0x1
|
|
Flush status: 0x0
|
|
Flush ctrl: 0x2001
|
|
root:/sys/bus/coresight/devices#
|
|
|
|
Trace collection is stopped the same way::
|
|
|
|
root:/sys/bus/coresight/devices# echo 0 > 2201c000.ptm/enable_source
|
|
root:/sys/bus/coresight/devices#
|
|
|
|
The content of the ETB buffer can be harvested directly from /dev::
|
|
|
|
root:/sys/bus/coresight/devices# dd if=/dev/20010000.etb \
|
|
of=~/cstrace.bin
|
|
64+0 records in
|
|
64+0 records out
|
|
32768 bytes (33 kB) copied, 0.00125258 s, 26.2 MB/s
|
|
root:/sys/bus/coresight/devices#
|
|
|
|
The file cstrace.bin can be decompressed using "ptm2human", DS-5 or Trace32.
|
|
|
|
Following is a DS-5 output of an experimental loop that increments a variable up
|
|
to a certain value. The example is simple and yet provides a glimpse of the
|
|
wealth of possibilities that coresight provides.
|
|
::
|
|
|
|
Info Tracing enabled
|
|
Instruction 106378866 0x8026B53C E52DE004 false PUSH {lr}
|
|
Instruction 0 0x8026B540 E24DD00C false SUB sp,sp,#0xc
|
|
Instruction 0 0x8026B544 E3A03000 false MOV r3,#0
|
|
Instruction 0 0x8026B548 E58D3004 false STR r3,[sp,#4]
|
|
Instruction 0 0x8026B54C E59D3004 false LDR r3,[sp,#4]
|
|
Instruction 0 0x8026B550 E3530004 false CMP r3,#4
|
|
Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1
|
|
Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4]
|
|
Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c
|
|
Timestamp Timestamp: 17106715833
|
|
Instruction 319 0x8026B54C E59D3004 false LDR r3,[sp,#4]
|
|
Instruction 0 0x8026B550 E3530004 false CMP r3,#4
|
|
Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1
|
|
Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4]
|
|
Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c
|
|
Instruction 9 0x8026B54C E59D3004 false LDR r3,[sp,#4]
|
|
Instruction 0 0x8026B550 E3530004 false CMP r3,#4
|
|
Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1
|
|
Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4]
|
|
Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c
|
|
Instruction 7 0x8026B54C E59D3004 false LDR r3,[sp,#4]
|
|
Instruction 0 0x8026B550 E3530004 false CMP r3,#4
|
|
Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1
|
|
Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4]
|
|
Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c
|
|
Instruction 7 0x8026B54C E59D3004 false LDR r3,[sp,#4]
|
|
Instruction 0 0x8026B550 E3530004 false CMP r3,#4
|
|
Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1
|
|
Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4]
|
|
Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c
|
|
Instruction 10 0x8026B54C E59D3004 false LDR r3,[sp,#4]
|
|
Instruction 0 0x8026B550 E3530004 false CMP r3,#4
|
|
Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1
|
|
Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4]
|
|
Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c
|
|
Instruction 6 0x8026B560 EE1D3F30 false MRC p15,#0x0,r3,c13,c0,#1
|
|
Instruction 0 0x8026B564 E1A0100D false MOV r1,sp
|
|
Instruction 0 0x8026B568 E3C12D7F false BIC r2,r1,#0x1fc0
|
|
Instruction 0 0x8026B56C E3C2203F false BIC r2,r2,#0x3f
|
|
Instruction 0 0x8026B570 E59D1004 false LDR r1,[sp,#4]
|
|
Instruction 0 0x8026B574 E59F0010 false LDR r0,[pc,#16] ; [0x8026B58C] = 0x80550368
|
|
Instruction 0 0x8026B578 E592200C false LDR r2,[r2,#0xc]
|
|
Instruction 0 0x8026B57C E59221D0 false LDR r2,[r2,#0x1d0]
|
|
Instruction 0 0x8026B580 EB07A4CF true BL {pc}+0x1e9344 ; 0x804548c4
|
|
Info Tracing enabled
|
|
Instruction 13570831 0x8026B584 E28DD00C false ADD sp,sp,#0xc
|
|
Instruction 0 0x8026B588 E8BD8000 true LDM sp!,{pc}
|
|
Timestamp Timestamp: 17107041535
|
|
|
|
2) Using perf framework:
|
|
|
|
Coresight tracers are represented using the Perf framework's Performance
|
|
Monitoring Unit (PMU) abstraction. As such the perf framework takes charge of
|
|
controlling when tracing gets enabled based on when the process of interest is
|
|
scheduled. When configured in a system, Coresight PMUs will be listed when
|
|
queried by the perf command line tool:
|
|
|
|
linaro@linaro-nano:~$ ./perf list pmu
|
|
|
|
List of pre-defined events (to be used in -e):
|
|
|
|
cs_etm// [Kernel PMU event]
|
|
|
|
linaro@linaro-nano:~$
|
|
|
|
Regardless of the number of tracers available in a system (usually equal to the
|
|
amount of processor cores), the "cs_etm" PMU will be listed only once.
|
|
|
|
A Coresight PMU works the same way as any other PMU, i.e the name of the PMU is
|
|
listed along with configuration options within forward slashes '/'. Since a
|
|
Coresight system will typically have more than one sink, the name of the sink to
|
|
work with needs to be specified as an event option.
|
|
On newer kernels the available sinks are listed in sysFS under
|
|
($SYSFS)/bus/event_source/devices/cs_etm/sinks/::
|
|
|
|
root@localhost:/sys/bus/event_source/devices/cs_etm/sinks# ls
|
|
tmc_etf0 tmc_etr0 tpiu0
|
|
|
|
On older kernels, this may need to be found from the list of coresight devices,
|
|
available under ($SYSFS)/bus/coresight/devices/::
|
|
|
|
root:~# ls /sys/bus/coresight/devices/
|
|
etm0 etm1 etm2 etm3 etm4 etm5 funnel0
|
|
funnel1 funnel2 replicator0 stm0 tmc_etf0 tmc_etr0 tpiu0
|
|
root@linaro-nano:~# perf record -e cs_etm/@tmc_etr0/u --per-thread program
|
|
|
|
As mentioned above in section "Device Naming scheme", the names of the devices could
|
|
look different from what is used in the example above. One must use the device names
|
|
as it appears under the sysFS.
|
|
|
|
The syntax within the forward slashes '/' is important. The '@' character
|
|
tells the parser that a sink is about to be specified and that this is the sink
|
|
to use for the trace session.
|
|
|
|
More information on the above and other example on how to use Coresight with
|
|
the perf tools can be found in the "HOWTO.md" file of the openCSD gitHub
|
|
repository [#third]_.
|
|
|
|
2.1) AutoFDO analysis using the perf tools:
|
|
|
|
perf can be used to record and analyze trace of programs.
|
|
|
|
Execution can be recorded using 'perf record' with the cs_etm event,
|
|
specifying the name of the sink to record to, e.g::
|
|
|
|
perf record -e cs_etm/@tmc_etr0/u --per-thread
|
|
|
|
The 'perf report' and 'perf script' commands can be used to analyze execution,
|
|
synthesizing instruction and branch events from the instruction trace.
|
|
'perf inject' can be used to replace the trace data with the synthesized events.
|
|
The --itrace option controls the type and frequency of synthesized events
|
|
(see perf documentation).
|
|
|
|
Note that only 64-bit programs are currently supported - further work is
|
|
required to support instruction decode of 32-bit Arm programs.
|
|
|
|
|
|
Generating coverage files for Feedback Directed Optimization: AutoFDO
|
|
---------------------------------------------------------------------
|
|
|
|
'perf inject' accepts the --itrace option in which case tracing data is
|
|
removed and replaced with the synthesized events. e.g.
|
|
::
|
|
|
|
perf inject --itrace --strip -i perf.data -o perf.data.new
|
|
|
|
Below is an example of using ARM ETM for autoFDO. It requires autofdo
|
|
(https://github.com/google/autofdo) and gcc version 5. The bubble
|
|
sort example is from the AutoFDO tutorial (https://gcc.gnu.org/wiki/AutoFDO/Tutorial).
|
|
::
|
|
|
|
$ gcc-5 -O3 sort.c -o sort
|
|
$ taskset -c 2 ./sort
|
|
Bubble sorting array of 30000 elements
|
|
5910 ms
|
|
|
|
$ perf record -e cs_etm/@tmc_etr0/u --per-thread taskset -c 2 ./sort
|
|
Bubble sorting array of 30000 elements
|
|
12543 ms
|
|
[ perf record: Woken up 35 times to write data ]
|
|
[ perf record: Captured and wrote 69.640 MB perf.data ]
|
|
|
|
$ perf inject -i perf.data -o inj.data --itrace=il64 --strip
|
|
$ create_gcov --binary=./sort --profile=inj.data --gcov=sort.gcov -gcov_version=1
|
|
$ gcc-5 -O3 -fauto-profile=sort.gcov sort.c -o sort_autofdo
|
|
$ taskset -c 2 ./sort_autofdo
|
|
Bubble sorting array of 30000 elements
|
|
5806 ms
|
|
|
|
|
|
How to use the STM module
|
|
-------------------------
|
|
|
|
Using the System Trace Macrocell module is the same as the tracers - the only
|
|
difference is that clients are driving the trace capture rather
|
|
than the program flow through the code.
|
|
|
|
As with any other CoreSight component, specifics about the STM tracer can be
|
|
found in sysfs with more information on each entry being found in [#first]_::
|
|
|
|
root@genericarmv8:~# ls /sys/bus/coresight/devices/stm0
|
|
enable_source hwevent_select port_enable subsystem uevent
|
|
hwevent_enable mgmt port_select traceid
|
|
root@genericarmv8:~#
|
|
|
|
Like any other source a sink needs to be identified and the STM enabled before
|
|
being used::
|
|
|
|
root@genericarmv8:~# echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
|
|
root@genericarmv8:~# echo 1 > /sys/bus/coresight/devices/stm0/enable_source
|
|
|
|
From there user space applications can request and use channels using the devfs
|
|
interface provided for that purpose by the generic STM API::
|
|
|
|
root@genericarmv8:~# ls -l /dev/stm0
|
|
crw------- 1 root root 10, 61 Jan 3 18:11 /dev/stm0
|
|
root@genericarmv8:~#
|
|
|
|
Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_.
|
|
|
|
The CTI & CTM Modules
|
|
---------------------
|
|
|
|
The CTI (Cross Trigger Interface) provides a set of trigger signals between
|
|
individual CTIs and components, and can propagate these between all CTIs via
|
|
channels on the CTM (Cross Trigger Matrix).
|
|
|
|
A separate documentation file is provided to explain the use of these devices.
|
|
(:doc:`coresight-ect`) [#fourth]_.
|
|
|
|
|
|
.. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
|
|
|
|
.. [#second] Documentation/trace/stm.rst
|
|
|
|
.. [#third] https://github.com/Linaro/perf-opencsd
|
|
|
|
.. [#fourth] Documentation/trace/coresight/coresight-ect.rst
|