openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/net/ethernet/intel/fm10k/fm10k_vf.c

598 lines
18 KiB
C
Raw Blame History

/* Intel Ethernet Switch Host Interface Driver
* Copyright(c) 2013 - 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*
* Contact Information:
* e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*/
#include "fm10k_vf.h"
/**
* fm10k_stop_hw_vf - Stop Tx/Rx units
* @hw: pointer to hardware structure
*
**/
static s32 fm10k_stop_hw_vf(struct fm10k_hw *hw)
{
u8 *perm_addr = hw->mac.perm_addr;
u32 bal = 0, bah = 0, tdlen;
s32 err;
u16 i;
/* we need to disable the queues before taking further steps */
err = fm10k_stop_hw_generic(hw);
if (err)
return err;
/* If permanent address is set then we need to restore it */
if (is_valid_ether_addr(perm_addr)) {
bal = (((u32)perm_addr[3]) << 24) |
(((u32)perm_addr[4]) << 16) |
(((u32)perm_addr[5]) << 8);
bah = (((u32)0xFF) << 24) |
(((u32)perm_addr[0]) << 16) |
(((u32)perm_addr[1]) << 8) |
((u32)perm_addr[2]);
}
/* restore default itr_scale for next VF initialization */
tdlen = hw->mac.itr_scale << FM10K_TDLEN_ITR_SCALE_SHIFT;
/* The queues have already been disabled so we just need to
* update their base address registers
*/
for (i = 0; i < hw->mac.max_queues; i++) {
fm10k_write_reg(hw, FM10K_TDBAL(i), bal);
fm10k_write_reg(hw, FM10K_TDBAH(i), bah);
fm10k_write_reg(hw, FM10K_RDBAL(i), bal);
fm10k_write_reg(hw, FM10K_RDBAH(i), bah);
/* Restore ITR scale in software-defined mechanism in TDLEN
* for next VF initialization. See definition of
* FM10K_TDLEN_ITR_SCALE_SHIFT for more details on the use of
* TDLEN here.
*/
fm10k_write_reg(hw, FM10K_TDLEN(i), tdlen);
}
return 0;
}
/**
* fm10k_reset_hw_vf - VF hardware reset
* @hw: pointer to hardware structure
*
* This function should return the hardware to a state similar to the
* one it is in after just being initialized.
**/
static s32 fm10k_reset_hw_vf(struct fm10k_hw *hw)
{
s32 err;
/* shut down queues we own and reset DMA configuration */
err = fm10k_stop_hw_vf(hw);
if (err)
return err;
/* Inititate VF reset */
fm10k_write_reg(hw, FM10K_VFCTRL, FM10K_VFCTRL_RST);
/* Flush write and allow 100us for reset to complete */
fm10k_write_flush(hw);
udelay(FM10K_RESET_TIMEOUT);
/* Clear reset bit and verify it was cleared */
fm10k_write_reg(hw, FM10K_VFCTRL, 0);
if (fm10k_read_reg(hw, FM10K_VFCTRL) & FM10K_VFCTRL_RST)
err = FM10K_ERR_RESET_FAILED;
return err;
}
/**
* fm10k_init_hw_vf - VF hardware initialization
* @hw: pointer to hardware structure
*
**/
static s32 fm10k_init_hw_vf(struct fm10k_hw *hw)
{
u32 tqdloc, tqdloc0 = ~fm10k_read_reg(hw, FM10K_TQDLOC(0));
s32 err;
u16 i;
/* verify we have at least 1 queue */
if (!~fm10k_read_reg(hw, FM10K_TXQCTL(0)) ||
!~fm10k_read_reg(hw, FM10K_RXQCTL(0))) {
err = FM10K_ERR_NO_RESOURCES;
goto reset_max_queues;
}
/* determine how many queues we have */
for (i = 1; tqdloc0 && (i < FM10K_MAX_QUEUES_POOL); i++) {
/* verify the Descriptor cache offsets are increasing */
tqdloc = ~fm10k_read_reg(hw, FM10K_TQDLOC(i));
if (!tqdloc || (tqdloc == tqdloc0))
break;
/* check to verify the PF doesn't own any of our queues */
if (!~fm10k_read_reg(hw, FM10K_TXQCTL(i)) ||
!~fm10k_read_reg(hw, FM10K_RXQCTL(i)))
break;
}
/* shut down queues we own and reset DMA configuration */
err = fm10k_disable_queues_generic(hw, i);
if (err)
goto reset_max_queues;
/* record maximum queue count */
hw->mac.max_queues = i;
/* fetch default VLAN and ITR scale */
hw->mac.default_vid = (fm10k_read_reg(hw, FM10K_TXQCTL(0)) &
FM10K_TXQCTL_VID_MASK) >> FM10K_TXQCTL_VID_SHIFT;
/* Read the ITR scale from TDLEN. See the definition of
* FM10K_TDLEN_ITR_SCALE_SHIFT for more information about how TDLEN is
* used here.
*/
hw->mac.itr_scale = (fm10k_read_reg(hw, FM10K_TDLEN(0)) &
FM10K_TDLEN_ITR_SCALE_MASK) >>
FM10K_TDLEN_ITR_SCALE_SHIFT;
return 0;
reset_max_queues:
hw->mac.max_queues = 0;
return err;
}
/* This structure defines the attibutes to be parsed below */
const struct fm10k_tlv_attr fm10k_mac_vlan_msg_attr[] = {
FM10K_TLV_ATTR_U32(FM10K_MAC_VLAN_MSG_VLAN),
FM10K_TLV_ATTR_BOOL(FM10K_MAC_VLAN_MSG_SET),
FM10K_TLV_ATTR_MAC_ADDR(FM10K_MAC_VLAN_MSG_MAC),
FM10K_TLV_ATTR_MAC_ADDR(FM10K_MAC_VLAN_MSG_DEFAULT_MAC),
FM10K_TLV_ATTR_MAC_ADDR(FM10K_MAC_VLAN_MSG_MULTICAST),
FM10K_TLV_ATTR_LAST
};
/**
* fm10k_update_vlan_vf - Update status of VLAN ID in VLAN filter table
* @hw: pointer to hardware structure
* @vid: VLAN ID to add to table
* @vsi: Reserved, should always be 0
* @set: Indicates if this is a set or clear operation
*
* This function adds or removes the corresponding VLAN ID from the VLAN
* filter table for this VF.
**/
static s32 fm10k_update_vlan_vf(struct fm10k_hw *hw, u32 vid, u8 vsi, bool set)
{
struct fm10k_mbx_info *mbx = &hw->mbx;
u32 msg[4];
/* verify the index is not set */
if (vsi)
return FM10K_ERR_PARAM;
/* verify upper 4 bits of vid and length are 0 */
if ((vid << 16 | vid) >> 28)
return FM10K_ERR_PARAM;
/* encode set bit into the VLAN ID */
if (!set)
vid |= FM10K_VLAN_CLEAR;
/* generate VLAN request */
fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN);
fm10k_tlv_attr_put_u32(msg, FM10K_MAC_VLAN_MSG_VLAN, vid);
/* load onto outgoing mailbox */
return mbx->ops.enqueue_tx(hw, mbx, msg);
}
/**
* fm10k_msg_mac_vlan_vf - Read device MAC address from mailbox message
* @hw: pointer to the HW structure
* @results: Attributes for message
* @mbx: unused mailbox data
*
* This function should determine the MAC address for the VF
**/
s32 fm10k_msg_mac_vlan_vf(struct fm10k_hw *hw, u32 **results,
struct fm10k_mbx_info *mbx)
{
u8 perm_addr[ETH_ALEN];
u16 vid;
s32 err;
/* record MAC address requested */
err = fm10k_tlv_attr_get_mac_vlan(
results[FM10K_MAC_VLAN_MSG_DEFAULT_MAC],
perm_addr, &vid);
if (err)
return err;
ether_addr_copy(hw->mac.perm_addr, perm_addr);
hw->mac.default_vid = vid & (FM10K_VLAN_TABLE_VID_MAX - 1);
hw->mac.vlan_override = !!(vid & FM10K_VLAN_CLEAR);
return 0;
}
/**
* fm10k_read_mac_addr_vf - Read device MAC address
* @hw: pointer to the HW structure
*
* This function should determine the MAC address for the VF
**/
static s32 fm10k_read_mac_addr_vf(struct fm10k_hw *hw)
{
u8 perm_addr[ETH_ALEN];
u32 base_addr;
base_addr = fm10k_read_reg(hw, FM10K_TDBAL(0));
/* last byte should be 0 */
if (base_addr << 24)
return FM10K_ERR_INVALID_MAC_ADDR;
perm_addr[3] = (u8)(base_addr >> 24);
perm_addr[4] = (u8)(base_addr >> 16);
perm_addr[5] = (u8)(base_addr >> 8);
base_addr = fm10k_read_reg(hw, FM10K_TDBAH(0));
/* first byte should be all 1's */
if ((~base_addr) >> 24)
return FM10K_ERR_INVALID_MAC_ADDR;
perm_addr[0] = (u8)(base_addr >> 16);
perm_addr[1] = (u8)(base_addr >> 8);
perm_addr[2] = (u8)(base_addr);
ether_addr_copy(hw->mac.perm_addr, perm_addr);
ether_addr_copy(hw->mac.addr, perm_addr);
return 0;
}
/**
* fm10k_update_uc_addr_vf - Update device unicast addresses
* @hw: pointer to the HW structure
* @glort: unused
* @mac: MAC address to add/remove from table
* @vid: VLAN ID to add/remove from table
* @add: Indicates if this is an add or remove operation
* @flags: flags field to indicate add and secure - unused
*
* This function is used to add or remove unicast MAC addresses for
* the VF.
**/
static s32 fm10k_update_uc_addr_vf(struct fm10k_hw *hw, u16 glort,
const u8 *mac, u16 vid, bool add, u8 flags)
{
struct fm10k_mbx_info *mbx = &hw->mbx;
u32 msg[7];
/* verify VLAN ID is valid */
if (vid >= FM10K_VLAN_TABLE_VID_MAX)
return FM10K_ERR_PARAM;
/* verify MAC address is valid */
if (!is_valid_ether_addr(mac))
return FM10K_ERR_PARAM;
/* verify we are not locked down on the MAC address */
if (is_valid_ether_addr(hw->mac.perm_addr) &&
!ether_addr_equal(hw->mac.perm_addr, mac))
return FM10K_ERR_PARAM;
/* add bit to notify us if this is a set or clear operation */
if (!add)
vid |= FM10K_VLAN_CLEAR;
/* generate VLAN request */
fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN);
fm10k_tlv_attr_put_mac_vlan(msg, FM10K_MAC_VLAN_MSG_MAC, mac, vid);
/* load onto outgoing mailbox */
return mbx->ops.enqueue_tx(hw, mbx, msg);
}
/**
* fm10k_update_mc_addr_vf - Update device multicast addresses
* @hw: pointer to the HW structure
* @glort: unused
* @mac: MAC address to add/remove from table
* @vid: VLAN ID to add/remove from table
* @add: Indicates if this is an add or remove operation
*
* This function is used to add or remove multicast MAC addresses for
* the VF.
**/
static s32 fm10k_update_mc_addr_vf(struct fm10k_hw *hw, u16 glort,
const u8 *mac, u16 vid, bool add)
{
struct fm10k_mbx_info *mbx = &hw->mbx;
u32 msg[7];
/* verify VLAN ID is valid */
if (vid >= FM10K_VLAN_TABLE_VID_MAX)
return FM10K_ERR_PARAM;
/* verify multicast address is valid */
if (!is_multicast_ether_addr(mac))
return FM10K_ERR_PARAM;
/* add bit to notify us if this is a set or clear operation */
if (!add)
vid |= FM10K_VLAN_CLEAR;
/* generate VLAN request */
fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN);
fm10k_tlv_attr_put_mac_vlan(msg, FM10K_MAC_VLAN_MSG_MULTICAST,
mac, vid);
/* load onto outgoing mailbox */
return mbx->ops.enqueue_tx(hw, mbx, msg);
}
/**
* fm10k_update_int_moderator_vf - Request update of interrupt moderator list
* @hw: pointer to hardware structure
*
* This function will issue a request to the PF to rescan our MSI-X table
* and to update the interrupt moderator linked list.
**/
static void fm10k_update_int_moderator_vf(struct fm10k_hw *hw)
{
struct fm10k_mbx_info *mbx = &hw->mbx;
u32 msg[1];
/* generate MSI-X request */
fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MSIX);
/* load onto outgoing mailbox */
mbx->ops.enqueue_tx(hw, mbx, msg);
}
/* This structure defines the attibutes to be parsed below */
const struct fm10k_tlv_attr fm10k_lport_state_msg_attr[] = {
FM10K_TLV_ATTR_BOOL(FM10K_LPORT_STATE_MSG_DISABLE),
FM10K_TLV_ATTR_U8(FM10K_LPORT_STATE_MSG_XCAST_MODE),
FM10K_TLV_ATTR_BOOL(FM10K_LPORT_STATE_MSG_READY),
FM10K_TLV_ATTR_LAST
};
/**
* fm10k_msg_lport_state_vf - Message handler for lport_state message from PF
* @hw: Pointer to hardware structure
* @results: pointer array containing parsed data
* @mbx: Pointer to mailbox information structure
*
* This handler is meant to capture the indication from the PF that we
* are ready to bring up the interface.
**/
s32 fm10k_msg_lport_state_vf(struct fm10k_hw *hw, u32 **results,
struct fm10k_mbx_info *mbx)
{
hw->mac.dglort_map = !results[FM10K_LPORT_STATE_MSG_READY] ?
FM10K_DGLORTMAP_NONE : FM10K_DGLORTMAP_ZERO;
return 0;
}
/**
* fm10k_update_lport_state_vf - Update device state in lower device
* @hw: pointer to the HW structure
* @glort: unused
* @count: number of logical ports to enable - unused (always 1)
* @enable: boolean value indicating if this is an enable or disable request
*
* Notify the lower device of a state change. If the lower device is
* enabled we can add filters, if it is disabled all filters for this
* logical port are flushed.
**/
static s32 fm10k_update_lport_state_vf(struct fm10k_hw *hw, u16 glort,
u16 count, bool enable)
{
struct fm10k_mbx_info *mbx = &hw->mbx;
u32 msg[2];
/* reset glort mask 0 as we have to wait to be enabled */
hw->mac.dglort_map = FM10K_DGLORTMAP_NONE;
/* generate port state request */
fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE);
if (!enable)
fm10k_tlv_attr_put_bool(msg, FM10K_LPORT_STATE_MSG_DISABLE);
/* load onto outgoing mailbox */
return mbx->ops.enqueue_tx(hw, mbx, msg);
}
/**
* fm10k_update_xcast_mode_vf - Request update of multicast mode
* @hw: pointer to hardware structure
* @glort: unused
* @mode: integer value indicating mode being requested
*
* This function will attempt to request a higher mode for the port
* so that it can enable either multicast, multicast promiscuous, or
* promiscuous mode of operation.
**/
static s32 fm10k_update_xcast_mode_vf(struct fm10k_hw *hw, u16 glort, u8 mode)
{
struct fm10k_mbx_info *mbx = &hw->mbx;
u32 msg[3];
if (mode > FM10K_XCAST_MODE_NONE)
return FM10K_ERR_PARAM;
/* generate message requesting to change xcast mode */
fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE);
fm10k_tlv_attr_put_u8(msg, FM10K_LPORT_STATE_MSG_XCAST_MODE, mode);
/* load onto outgoing mailbox */
return mbx->ops.enqueue_tx(hw, mbx, msg);
}
const struct fm10k_tlv_attr fm10k_1588_msg_attr[] = {
FM10K_TLV_ATTR_U64(FM10K_1588_MSG_TIMESTAMP),
FM10K_TLV_ATTR_LAST
};
/* currently there is no shared 1588 timestamp handler */
/**
* fm10k_update_hw_stats_vf - Updates hardware related statistics of VF
* @hw: pointer to hardware structure
* @stats: pointer to statistics structure
*
* This function collects and aggregates per queue hardware statistics.
**/
static void fm10k_update_hw_stats_vf(struct fm10k_hw *hw,
struct fm10k_hw_stats *stats)
{
fm10k_update_hw_stats_q(hw, stats->q, 0, hw->mac.max_queues);
}
/**
* fm10k_rebind_hw_stats_vf - Resets base for hardware statistics of VF
* @hw: pointer to hardware structure
* @stats: pointer to the stats structure to update
*
* This function resets the base for queue hardware statistics.
**/
static void fm10k_rebind_hw_stats_vf(struct fm10k_hw *hw,
struct fm10k_hw_stats *stats)
{
/* Unbind Queue Statistics */
fm10k_unbind_hw_stats_q(stats->q, 0, hw->mac.max_queues);
/* Reinitialize bases for all stats */
fm10k_update_hw_stats_vf(hw, stats);
}
/**
* fm10k_configure_dglort_map_vf - Configures GLORT entry and queues
* @hw: pointer to hardware structure
* @dglort: pointer to dglort configuration structure
*
* Reads the configuration structure contained in dglort_cfg and uses
* that information to then populate a DGLORTMAP/DEC entry and the queues
* to which it has been assigned.
**/
static s32 fm10k_configure_dglort_map_vf(struct fm10k_hw *hw,
struct fm10k_dglort_cfg *dglort)
{
/* verify the dglort pointer */
if (!dglort)
return FM10K_ERR_PARAM;
/* stub for now until we determine correct message for this */
return 0;
}
/**
* fm10k_adjust_systime_vf - Adjust systime frequency
* @hw: pointer to hardware structure
* @ppb: adjustment rate in parts per billion
*
* This function takes an adjustment rate in parts per billion and will
* verify that this value is 0 as the VF cannot support adjusting the
* systime clock.
*
* If the ppb value is non-zero the return is ERR_PARAM else success
**/
static s32 fm10k_adjust_systime_vf(struct fm10k_hw *hw, s32 ppb)
{
/* The VF cannot adjust the clock frequency, however it should
* already have a syntonic clock with whichever host interface is
* running as the master for the host interface clock domain so
* there should be not frequency adjustment necessary.
*/
return ppb ? FM10K_ERR_PARAM : 0;
}
/**
* fm10k_read_systime_vf - Reads value of systime registers
* @hw: pointer to the hardware structure
*
* Function reads the content of 2 registers, combined to represent a 64 bit
* value measured in nanoseconds. In order to guarantee the value is accurate
* we check the 32 most significant bits both before and after reading the
* 32 least significant bits to verify they didn't change as we were reading
* the registers.
**/
static u64 fm10k_read_systime_vf(struct fm10k_hw *hw)
{
u32 systime_l, systime_h, systime_tmp;
systime_h = fm10k_read_reg(hw, FM10K_VFSYSTIME + 1);
do {
systime_tmp = systime_h;
systime_l = fm10k_read_reg(hw, FM10K_VFSYSTIME);
systime_h = fm10k_read_reg(hw, FM10K_VFSYSTIME + 1);
} while (systime_tmp != systime_h);
return ((u64)systime_h << 32) | systime_l;
}
static const struct fm10k_msg_data fm10k_msg_data_vf[] = {
FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test),
FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_msg_mac_vlan_vf),
FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_msg_lport_state_vf),
FM10K_TLV_MSG_ERROR_HANDLER(fm10k_tlv_msg_error),
};
static const struct fm10k_mac_ops mac_ops_vf = {
.get_bus_info = fm10k_get_bus_info_generic,
.reset_hw = fm10k_reset_hw_vf,
.init_hw = fm10k_init_hw_vf,
.start_hw = fm10k_start_hw_generic,
.stop_hw = fm10k_stop_hw_vf,
.update_vlan = fm10k_update_vlan_vf,
.read_mac_addr = fm10k_read_mac_addr_vf,
.update_uc_addr = fm10k_update_uc_addr_vf,
.update_mc_addr = fm10k_update_mc_addr_vf,
.update_xcast_mode = fm10k_update_xcast_mode_vf,
.update_int_moderator = fm10k_update_int_moderator_vf,
.update_lport_state = fm10k_update_lport_state_vf,
.update_hw_stats = fm10k_update_hw_stats_vf,
.rebind_hw_stats = fm10k_rebind_hw_stats_vf,
.configure_dglort_map = fm10k_configure_dglort_map_vf,
.get_host_state = fm10k_get_host_state_generic,
.adjust_systime = fm10k_adjust_systime_vf,
.read_systime = fm10k_read_systime_vf,
};
static s32 fm10k_get_invariants_vf(struct fm10k_hw *hw)
{
fm10k_get_invariants_generic(hw);
return fm10k_pfvf_mbx_init(hw, &hw->mbx, fm10k_msg_data_vf, 0);
}
const struct fm10k_info fm10k_vf_info = {
.mac = fm10k_mac_vf,
.get_invariants = fm10k_get_invariants_vf,
.mac_ops = &mac_ops_vf,
};
Reference in New Issue View Git Blame Copy Permalink