mirror of https://gitee.com/openkylin/linux.git
66 lines
2.0 KiB
Plaintext
66 lines
2.0 KiB
Plaintext
* Samsung Exynos 5440 PCIe interface
|
|
|
|
This PCIe host controller is based on the Synopsis Designware PCIe IP
|
|
and thus inherits all the common properties defined in designware-pcie.txt.
|
|
|
|
Required properties:
|
|
- compatible: "samsung,exynos5440-pcie"
|
|
- reg: base addresses and lengths of the pcie controller,
|
|
the phy controller, additional register for the phy controller.
|
|
- interrupts: A list of interrupt outputs for level interrupt,
|
|
pulse interrupt, special interrupt.
|
|
|
|
Example:
|
|
|
|
SoC specific DT Entry:
|
|
|
|
pcie@290000 {
|
|
compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
|
|
reg = <0x290000 0x1000
|
|
0x270000 0x1000
|
|
0x271000 0x40>;
|
|
interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
|
|
clocks = <&clock 28>, <&clock 27>;
|
|
clock-names = "pcie", "pcie_bus";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000 /* configuration space */
|
|
0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */
|
|
0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
num-lanes = <4>;
|
|
};
|
|
|
|
pcie@2a0000 {
|
|
compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
|
|
reg = <0x2a0000 0x1000
|
|
0x272000 0x1000
|
|
0x271040 0x40>;
|
|
interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
|
|
clocks = <&clock 29>, <&clock 27>;
|
|
clock-names = "pcie", "pcie_bus";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000 /* configuration space */
|
|
0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */
|
|
0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
|
|
num-lanes = <4>;
|
|
};
|
|
|
|
Board specific DT Entry:
|
|
|
|
pcie@290000 {
|
|
reset-gpio = <&pin_ctrl 5 0>;
|
|
};
|
|
|
|
pcie@2a0000 {
|
|
reset-gpio = <&pin_ctrl 22 0>;
|
|
};
|