mirror of https://gitee.com/openkylin/linux.git
849 lines
20 KiB
C
849 lines
20 KiB
C
/*
|
|
* Board support file for OMAP4430 SDP.
|
|
*
|
|
* Copyright (C) 2009 Texas Instruments
|
|
*
|
|
* Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
*
|
|
* Based on mach-omap2/board-3430sdp.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/i2c/twl.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/leds_pwm.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/omap4-common.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <plat/board.h>
|
|
#include <plat/common.h>
|
|
#include <plat/usb.h>
|
|
#include <plat/mmc.h>
|
|
#include <plat/omap4-keypad.h>
|
|
#include <video/omapdss.h>
|
|
#include <linux/wl12xx.h>
|
|
|
|
#include "mux.h"
|
|
#include "hsmmc.h"
|
|
#include "control.h"
|
|
#include "common-board-devices.h"
|
|
|
|
#define ETH_KS8851_IRQ 34
|
|
#define ETH_KS8851_POWER_ON 48
|
|
#define ETH_KS8851_QUART 138
|
|
#define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184
|
|
#define OMAP4_SFH7741_ENABLE_GPIO 188
|
|
#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
|
|
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
|
|
|
|
#define GPIO_WIFI_PMENA 54
|
|
#define GPIO_WIFI_IRQ 53
|
|
|
|
static const int sdp4430_keymap[] = {
|
|
KEY(0, 0, KEY_E),
|
|
KEY(0, 1, KEY_R),
|
|
KEY(0, 2, KEY_T),
|
|
KEY(0, 3, KEY_HOME),
|
|
KEY(0, 4, KEY_F5),
|
|
KEY(0, 5, KEY_UNKNOWN),
|
|
KEY(0, 6, KEY_I),
|
|
KEY(0, 7, KEY_LEFTSHIFT),
|
|
|
|
KEY(1, 0, KEY_D),
|
|
KEY(1, 1, KEY_F),
|
|
KEY(1, 2, KEY_G),
|
|
KEY(1, 3, KEY_SEND),
|
|
KEY(1, 4, KEY_F6),
|
|
KEY(1, 5, KEY_UNKNOWN),
|
|
KEY(1, 6, KEY_K),
|
|
KEY(1, 7, KEY_ENTER),
|
|
|
|
KEY(2, 0, KEY_X),
|
|
KEY(2, 1, KEY_C),
|
|
KEY(2, 2, KEY_V),
|
|
KEY(2, 3, KEY_END),
|
|
KEY(2, 4, KEY_F7),
|
|
KEY(2, 5, KEY_UNKNOWN),
|
|
KEY(2, 6, KEY_DOT),
|
|
KEY(2, 7, KEY_CAPSLOCK),
|
|
|
|
KEY(3, 0, KEY_Z),
|
|
KEY(3, 1, KEY_KPPLUS),
|
|
KEY(3, 2, KEY_B),
|
|
KEY(3, 3, KEY_F1),
|
|
KEY(3, 4, KEY_F8),
|
|
KEY(3, 5, KEY_UNKNOWN),
|
|
KEY(3, 6, KEY_O),
|
|
KEY(3, 7, KEY_SPACE),
|
|
|
|
KEY(4, 0, KEY_W),
|
|
KEY(4, 1, KEY_Y),
|
|
KEY(4, 2, KEY_U),
|
|
KEY(4, 3, KEY_F2),
|
|
KEY(4, 4, KEY_VOLUMEUP),
|
|
KEY(4, 5, KEY_UNKNOWN),
|
|
KEY(4, 6, KEY_L),
|
|
KEY(4, 7, KEY_LEFT),
|
|
|
|
KEY(5, 0, KEY_S),
|
|
KEY(5, 1, KEY_H),
|
|
KEY(5, 2, KEY_J),
|
|
KEY(5, 3, KEY_F3),
|
|
KEY(5, 4, KEY_F9),
|
|
KEY(5, 5, KEY_VOLUMEDOWN),
|
|
KEY(5, 6, KEY_M),
|
|
KEY(5, 7, KEY_RIGHT),
|
|
|
|
KEY(6, 0, KEY_Q),
|
|
KEY(6, 1, KEY_A),
|
|
KEY(6, 2, KEY_N),
|
|
KEY(6, 3, KEY_BACK),
|
|
KEY(6, 4, KEY_BACKSPACE),
|
|
KEY(6, 5, KEY_UNKNOWN),
|
|
KEY(6, 6, KEY_P),
|
|
KEY(6, 7, KEY_UP),
|
|
|
|
KEY(7, 0, KEY_PROG1),
|
|
KEY(7, 1, KEY_PROG2),
|
|
KEY(7, 2, KEY_PROG3),
|
|
KEY(7, 3, KEY_PROG4),
|
|
KEY(7, 4, KEY_F4),
|
|
KEY(7, 5, KEY_UNKNOWN),
|
|
KEY(7, 6, KEY_OK),
|
|
KEY(7, 7, KEY_DOWN),
|
|
};
|
|
static struct omap_device_pad keypad_pads[] __initdata = {
|
|
{ .name = "kpd_col1.kpd_col1",
|
|
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
|
|
},
|
|
{ .name = "kpd_col1.kpd_col1",
|
|
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
|
|
},
|
|
{ .name = "kpd_col2.kpd_col2",
|
|
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
|
|
},
|
|
{ .name = "kpd_col3.kpd_col3",
|
|
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
|
|
},
|
|
{ .name = "kpd_col4.kpd_col4",
|
|
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
|
|
},
|
|
{ .name = "kpd_col5.kpd_col5",
|
|
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
|
|
},
|
|
{ .name = "gpmc_a23.kpd_col7",
|
|
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
|
|
},
|
|
{ .name = "gpmc_a22.kpd_col6",
|
|
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
|
|
},
|
|
{ .name = "kpd_row0.kpd_row0",
|
|
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
|
|
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
|
|
},
|
|
{ .name = "kpd_row1.kpd_row1",
|
|
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
|
|
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
|
|
},
|
|
{ .name = "kpd_row2.kpd_row2",
|
|
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
|
|
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
|
|
},
|
|
{ .name = "kpd_row3.kpd_row3",
|
|
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
|
|
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
|
|
},
|
|
{ .name = "kpd_row4.kpd_row4",
|
|
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
|
|
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
|
|
},
|
|
{ .name = "kpd_row5.kpd_row5",
|
|
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
|
|
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
|
|
},
|
|
{ .name = "gpmc_a18.kpd_row6",
|
|
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
|
|
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
|
|
},
|
|
{ .name = "gpmc_a19.kpd_row7",
|
|
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
|
|
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
|
|
},
|
|
};
|
|
|
|
static struct matrix_keymap_data sdp4430_keymap_data = {
|
|
.keymap = sdp4430_keymap,
|
|
.keymap_size = ARRAY_SIZE(sdp4430_keymap),
|
|
};
|
|
|
|
static struct omap4_keypad_platform_data sdp4430_keypad_data = {
|
|
.keymap_data = &sdp4430_keymap_data,
|
|
.rows = 8,
|
|
.cols = 8,
|
|
};
|
|
|
|
static struct omap_board_data keypad_data = {
|
|
.id = 1,
|
|
.pads = keypad_pads,
|
|
.pads_cnt = ARRAY_SIZE(keypad_pads),
|
|
};
|
|
|
|
static struct gpio_led sdp4430_gpio_leds[] = {
|
|
{
|
|
.name = "omap4:green:debug0",
|
|
.gpio = 61,
|
|
},
|
|
{
|
|
.name = "omap4:green:debug1",
|
|
.gpio = 30,
|
|
},
|
|
{
|
|
.name = "omap4:green:debug2",
|
|
.gpio = 7,
|
|
},
|
|
{
|
|
.name = "omap4:green:debug3",
|
|
.gpio = 8,
|
|
},
|
|
{
|
|
.name = "omap4:green:debug4",
|
|
.gpio = 50,
|
|
},
|
|
{
|
|
.name = "omap4:blue:user",
|
|
.gpio = 169,
|
|
},
|
|
{
|
|
.name = "omap4:red:user",
|
|
.gpio = 170,
|
|
},
|
|
{
|
|
.name = "omap4:green:user",
|
|
.gpio = 139,
|
|
},
|
|
|
|
};
|
|
|
|
static struct gpio_keys_button sdp4430_gpio_keys[] = {
|
|
{
|
|
.desc = "Proximity Sensor",
|
|
.type = EV_SW,
|
|
.code = SW_FRONT_PROXIMITY,
|
|
.gpio = OMAP4_SFH7741_SENSOR_OUTPUT_GPIO,
|
|
.active_low = 0,
|
|
}
|
|
};
|
|
|
|
static struct gpio_led_platform_data sdp4430_led_data = {
|
|
.leds = sdp4430_gpio_leds,
|
|
.num_leds = ARRAY_SIZE(sdp4430_gpio_leds),
|
|
};
|
|
|
|
static struct led_pwm sdp4430_pwm_leds[] = {
|
|
{
|
|
.name = "omap4:green:chrg",
|
|
.pwm_id = 1,
|
|
.max_brightness = 255,
|
|
.pwm_period_ns = 7812500,
|
|
},
|
|
};
|
|
|
|
static struct led_pwm_platform_data sdp4430_pwm_data = {
|
|
.num_leds = ARRAY_SIZE(sdp4430_pwm_leds),
|
|
.leds = sdp4430_pwm_leds,
|
|
};
|
|
|
|
static struct platform_device sdp4430_leds_pwm = {
|
|
.name = "leds_pwm",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &sdp4430_pwm_data,
|
|
},
|
|
};
|
|
|
|
static int omap_prox_activate(struct device *dev)
|
|
{
|
|
gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_prox_deactivate(struct device *dev)
|
|
{
|
|
gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 0);
|
|
}
|
|
|
|
static struct gpio_keys_platform_data sdp4430_gpio_keys_data = {
|
|
.buttons = sdp4430_gpio_keys,
|
|
.nbuttons = ARRAY_SIZE(sdp4430_gpio_keys),
|
|
.enable = omap_prox_activate,
|
|
.disable = omap_prox_deactivate,
|
|
};
|
|
|
|
static struct platform_device sdp4430_gpio_keys_device = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &sdp4430_gpio_keys_data,
|
|
},
|
|
};
|
|
|
|
static struct platform_device sdp4430_leds_gpio = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &sdp4430_led_data,
|
|
},
|
|
};
|
|
static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
|
|
{
|
|
.modalias = "ks8851",
|
|
.bus_num = 1,
|
|
.chip_select = 0,
|
|
.max_speed_hz = 24000000,
|
|
.irq = ETH_KS8851_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct gpio sdp4430_eth_gpios[] __initdata = {
|
|
{ ETH_KS8851_POWER_ON, GPIOF_OUT_INIT_HIGH, "eth_power" },
|
|
{ ETH_KS8851_QUART, GPIOF_OUT_INIT_HIGH, "quart" },
|
|
{ ETH_KS8851_IRQ, GPIOF_IN, "eth_irq" },
|
|
};
|
|
|
|
static int __init omap_ethernet_init(void)
|
|
{
|
|
int status;
|
|
|
|
/* Request of GPIO lines */
|
|
status = gpio_request_array(sdp4430_eth_gpios,
|
|
ARRAY_SIZE(sdp4430_eth_gpios));
|
|
if (status)
|
|
pr_err("Cannot request ETH GPIOs\n");
|
|
|
|
return status;
|
|
}
|
|
|
|
static struct platform_device sdp4430_lcd_device = {
|
|
.name = "sdp4430_lcd",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct regulator_consumer_supply sdp4430_vbat_supply[] = {
|
|
REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"),
|
|
REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"),
|
|
};
|
|
|
|
static struct regulator_init_data sdp4430_vbat_data = {
|
|
.constraints = {
|
|
.always_on = 1,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(sdp4430_vbat_supply),
|
|
.consumer_supplies = sdp4430_vbat_supply,
|
|
};
|
|
|
|
static struct fixed_voltage_config sdp4430_vbat_pdata = {
|
|
.supply_name = "VBAT",
|
|
.microvolts = 3750000,
|
|
.init_data = &sdp4430_vbat_data,
|
|
.gpio = -EINVAL,
|
|
};
|
|
|
|
static struct platform_device sdp4430_vbat = {
|
|
.name = "reg-fixed-voltage",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &sdp4430_vbat_pdata,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *sdp4430_devices[] __initdata = {
|
|
&sdp4430_lcd_device,
|
|
&sdp4430_gpio_keys_device,
|
|
&sdp4430_leds_gpio,
|
|
&sdp4430_leds_pwm,
|
|
&sdp4430_vbat,
|
|
};
|
|
|
|
static struct omap_lcd_config sdp4430_lcd_config __initdata = {
|
|
.ctrl_name = "internal",
|
|
};
|
|
|
|
static struct omap_board_config_kernel sdp4430_config[] __initdata = {
|
|
{ OMAP_TAG_LCD, &sdp4430_lcd_config },
|
|
};
|
|
|
|
static void __init omap_4430sdp_init_early(void)
|
|
{
|
|
omap2_init_common_infrastructure();
|
|
omap2_init_common_devices(NULL, NULL);
|
|
}
|
|
|
|
static struct omap_musb_board_data musb_board_data = {
|
|
.interface_type = MUSB_INTERFACE_UTMI,
|
|
.mode = MUSB_OTG,
|
|
.power = 100,
|
|
};
|
|
|
|
static struct omap2_hsmmc_info mmc[] = {
|
|
{
|
|
.mmc = 2,
|
|
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
|
|
.gpio_cd = -EINVAL,
|
|
.gpio_wp = -EINVAL,
|
|
.nonremovable = true,
|
|
.ocr_mask = MMC_VDD_29_30,
|
|
.no_off_init = true,
|
|
},
|
|
{
|
|
.mmc = 1,
|
|
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
|
|
.gpio_cd = -EINVAL,
|
|
.gpio_wp = -EINVAL,
|
|
},
|
|
{
|
|
.mmc = 5,
|
|
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
|
|
.gpio_cd = -EINVAL,
|
|
.gpio_wp = -EINVAL,
|
|
.ocr_mask = MMC_VDD_165_195,
|
|
.nonremovable = true,
|
|
},
|
|
{} /* Terminator */
|
|
};
|
|
|
|
static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
|
|
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
|
|
};
|
|
|
|
static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = {
|
|
.supply = "vmmc",
|
|
.dev_name = "omap_hsmmc.4",
|
|
};
|
|
|
|
static struct regulator_init_data sdp4430_vmmc5 = {
|
|
.constraints = {
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &omap4_sdp4430_vmmc5_supply,
|
|
};
|
|
|
|
static struct fixed_voltage_config sdp4430_vwlan = {
|
|
.supply_name = "vwl1271",
|
|
.microvolts = 1800000, /* 1.8V */
|
|
.gpio = GPIO_WIFI_PMENA,
|
|
.startup_delay = 70000, /* 70msec */
|
|
.enable_high = 1,
|
|
.enabled_at_boot = 0,
|
|
.init_data = &sdp4430_vmmc5,
|
|
};
|
|
|
|
static struct platform_device omap_vwlan_device = {
|
|
.name = "reg-fixed-voltage",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &sdp4430_vwlan,
|
|
},
|
|
};
|
|
|
|
static int omap4_twl6030_hsmmc_late_init(struct device *dev)
|
|
{
|
|
int ret = 0;
|
|
struct platform_device *pdev = container_of(dev,
|
|
struct platform_device, dev);
|
|
struct omap_mmc_platform_data *pdata = dev->platform_data;
|
|
|
|
/* Setting MMC1 Card detect Irq */
|
|
if (pdev->id == 0) {
|
|
ret = twl6030_mmc_card_detect_config();
|
|
if (ret)
|
|
pr_err("Failed configuring MMC1 card detect\n");
|
|
pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
|
|
MMCDETECT_INTR_OFFSET;
|
|
pdata->slots[0].card_detect = twl6030_mmc_card_detect;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
|
|
{
|
|
struct omap_mmc_platform_data *pdata;
|
|
|
|
/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
|
|
if (!dev) {
|
|
pr_err("Failed %s\n", __func__);
|
|
return;
|
|
}
|
|
pdata = dev->platform_data;
|
|
pdata->init = omap4_twl6030_hsmmc_late_init;
|
|
}
|
|
|
|
static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
|
|
{
|
|
struct omap2_hsmmc_info *c;
|
|
|
|
omap2_hsmmc_init(controllers);
|
|
for (c = controllers; c->mmc; c++)
|
|
omap4_twl6030_hsmmc_set_late_init(c->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct regulator_init_data sdp4430_vaux1 = {
|
|
.constraints = {
|
|
.min_uV = 1000000,
|
|
.max_uV = 3000000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(sdp4430_vaux_supply),
|
|
.consumer_supplies = sdp4430_vaux_supply,
|
|
};
|
|
|
|
static struct regulator_init_data sdp4430_vusim = {
|
|
.constraints = {
|
|
.min_uV = 1200000,
|
|
.max_uV = 2900000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct twl4030_codec_data twl6040_codec = {
|
|
/* single-step ramp for headset and handsfree */
|
|
.hs_left_step = 0x0f,
|
|
.hs_right_step = 0x0f,
|
|
.hf_left_step = 0x1d,
|
|
.hf_right_step = 0x1d,
|
|
};
|
|
|
|
static struct twl4030_vibra_data twl6040_vibra = {
|
|
.vibldrv_res = 8,
|
|
.vibrdrv_res = 3,
|
|
.viblmotor_res = 10,
|
|
.vibrmotor_res = 10,
|
|
.vddvibl_uV = 0, /* fixed volt supply - VBAT */
|
|
.vddvibr_uV = 0, /* fixed volt supply - VBAT */
|
|
};
|
|
|
|
static struct twl4030_audio_data twl6040_audio = {
|
|
.codec = &twl6040_codec,
|
|
.vibra = &twl6040_vibra,
|
|
.audpwron_gpio = 127,
|
|
.naudint_irq = OMAP44XX_IRQ_SYS_2N,
|
|
.irq_base = TWL6040_CODEC_IRQ_BASE,
|
|
};
|
|
|
|
static struct twl4030_platform_data sdp4430_twldata = {
|
|
.audio = &twl6040_audio,
|
|
/* Regulators */
|
|
.vusim = &sdp4430_vusim,
|
|
.vaux1 = &sdp4430_vaux1,
|
|
};
|
|
|
|
static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
|
|
{
|
|
I2C_BOARD_INFO("tmp105", 0x48),
|
|
},
|
|
{
|
|
I2C_BOARD_INFO("bh1780", 0x29),
|
|
},
|
|
};
|
|
static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
|
|
{
|
|
I2C_BOARD_INFO("hmc5843", 0x1e),
|
|
},
|
|
};
|
|
static int __init omap4_i2c_init(void)
|
|
{
|
|
omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB,
|
|
TWL_COMMON_REGULATOR_VDAC |
|
|
TWL_COMMON_REGULATOR_VAUX2 |
|
|
TWL_COMMON_REGULATOR_VAUX3 |
|
|
TWL_COMMON_REGULATOR_VMMC |
|
|
TWL_COMMON_REGULATOR_VPP |
|
|
TWL_COMMON_REGULATOR_VANA |
|
|
TWL_COMMON_REGULATOR_VCXIO |
|
|
TWL_COMMON_REGULATOR_VUSB |
|
|
TWL_COMMON_REGULATOR_CLK32KG);
|
|
omap4_pmic_init("twl6030", &sdp4430_twldata);
|
|
omap_register_i2c_bus(2, 400, NULL, 0);
|
|
omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
|
|
ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
|
|
omap_register_i2c_bus(4, 400, sdp4430_i2c_4_boardinfo,
|
|
ARRAY_SIZE(sdp4430_i2c_4_boardinfo));
|
|
return 0;
|
|
}
|
|
|
|
static void __init omap_sfh7741prox_init(void)
|
|
{
|
|
int error;
|
|
|
|
error = gpio_request_one(OMAP4_SFH7741_ENABLE_GPIO,
|
|
GPIOF_OUT_INIT_LOW, "sfh7741");
|
|
if (error < 0)
|
|
pr_err("%s:failed to request GPIO %d, error %d\n",
|
|
__func__, OMAP4_SFH7741_ENABLE_GPIO, error);
|
|
}
|
|
|
|
static void sdp4430_hdmi_mux_init(void)
|
|
{
|
|
/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
|
|
omap_mux_init_signal("hdmi_hpd",
|
|
OMAP_PIN_INPUT_PULLUP);
|
|
omap_mux_init_signal("hdmi_cec",
|
|
OMAP_PIN_INPUT_PULLUP);
|
|
/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
|
|
omap_mux_init_signal("hdmi_ddc_scl",
|
|
OMAP_PIN_INPUT_PULLUP);
|
|
omap_mux_init_signal("hdmi_ddc_sda",
|
|
OMAP_PIN_INPUT_PULLUP);
|
|
}
|
|
|
|
static struct gpio sdp4430_hdmi_gpios[] = {
|
|
{ HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
|
|
{ HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
|
|
};
|
|
|
|
static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
|
|
{
|
|
int status;
|
|
|
|
status = gpio_request_array(sdp4430_hdmi_gpios,
|
|
ARRAY_SIZE(sdp4430_hdmi_gpios));
|
|
if (status)
|
|
pr_err("%s: Cannot request HDMI GPIOs\n", __func__);
|
|
|
|
return status;
|
|
}
|
|
|
|
static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
|
|
{
|
|
gpio_free(HDMI_GPIO_LS_OE);
|
|
gpio_free(HDMI_GPIO_HPD);
|
|
}
|
|
|
|
static struct omap_dss_device sdp4430_hdmi_device = {
|
|
.name = "hdmi",
|
|
.driver_name = "hdmi_panel",
|
|
.type = OMAP_DISPLAY_TYPE_HDMI,
|
|
.clocks = {
|
|
.dispc = {
|
|
.dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
|
|
},
|
|
.hdmi = {
|
|
.regn = 15,
|
|
.regm2 = 1,
|
|
},
|
|
},
|
|
.platform_enable = sdp4430_panel_enable_hdmi,
|
|
.platform_disable = sdp4430_panel_disable_hdmi,
|
|
.channel = OMAP_DSS_CHANNEL_DIGIT,
|
|
};
|
|
|
|
static struct omap_dss_device *sdp4430_dss_devices[] = {
|
|
&sdp4430_hdmi_device,
|
|
};
|
|
|
|
static struct omap_dss_board_info sdp4430_dss_data = {
|
|
.num_devices = ARRAY_SIZE(sdp4430_dss_devices),
|
|
.devices = sdp4430_dss_devices,
|
|
.default_device = &sdp4430_hdmi_device,
|
|
};
|
|
|
|
void omap_4430sdp_display_init(void)
|
|
{
|
|
sdp4430_hdmi_mux_init();
|
|
omap_display_init(&sdp4430_dss_data);
|
|
}
|
|
|
|
#ifdef CONFIG_OMAP_MUX
|
|
static struct omap_board_mux board_mux[] __initdata = {
|
|
OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
|
|
{ .reg_offset = OMAP_MUX_TERMINATOR },
|
|
};
|
|
|
|
static struct omap_device_pad serial2_pads[] __initdata = {
|
|
OMAP_MUX_STATIC("uart2_cts.uart2_cts",
|
|
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
|
|
OMAP_MUX_STATIC("uart2_rts.uart2_rts",
|
|
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
|
|
OMAP_MUX_STATIC("uart2_rx.uart2_rx",
|
|
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
|
|
OMAP_MUX_STATIC("uart2_tx.uart2_tx",
|
|
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
|
|
};
|
|
|
|
static struct omap_device_pad serial3_pads[] __initdata = {
|
|
OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
|
|
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
|
|
OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
|
|
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
|
|
OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
|
|
OMAP_PIN_INPUT | OMAP_MUX_MODE0),
|
|
OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
|
|
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
|
|
};
|
|
|
|
static struct omap_device_pad serial4_pads[] __initdata = {
|
|
OMAP_MUX_STATIC("uart4_rx.uart4_rx",
|
|
OMAP_PIN_INPUT | OMAP_MUX_MODE0),
|
|
OMAP_MUX_STATIC("uart4_tx.uart4_tx",
|
|
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
|
|
};
|
|
|
|
static struct omap_board_data serial2_data __initdata = {
|
|
.id = 1,
|
|
.pads = serial2_pads,
|
|
.pads_cnt = ARRAY_SIZE(serial2_pads),
|
|
};
|
|
|
|
static struct omap_board_data serial3_data __initdata = {
|
|
.id = 2,
|
|
.pads = serial3_pads,
|
|
.pads_cnt = ARRAY_SIZE(serial3_pads),
|
|
};
|
|
|
|
static struct omap_board_data serial4_data __initdata = {
|
|
.id = 3,
|
|
.pads = serial4_pads,
|
|
.pads_cnt = ARRAY_SIZE(serial4_pads),
|
|
};
|
|
|
|
static inline void board_serial_init(void)
|
|
{
|
|
struct omap_board_data bdata;
|
|
bdata.flags = 0;
|
|
bdata.pads = NULL;
|
|
bdata.pads_cnt = 0;
|
|
bdata.id = 0;
|
|
/* pass dummy data for UART1 */
|
|
omap_serial_init_port(&bdata);
|
|
|
|
omap_serial_init_port(&serial2_data);
|
|
omap_serial_init_port(&serial3_data);
|
|
omap_serial_init_port(&serial4_data);
|
|
}
|
|
#else
|
|
#define board_mux NULL
|
|
|
|
static inline void board_serial_init(void)
|
|
{
|
|
omap_serial_init();
|
|
}
|
|
#endif
|
|
|
|
static void omap4_sdp4430_wifi_mux_init(void)
|
|
{
|
|
omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT |
|
|
OMAP_PIN_OFF_WAKEUPENABLE);
|
|
omap_mux_init_gpio(GPIO_WIFI_PMENA, OMAP_PIN_OUTPUT);
|
|
|
|
omap_mux_init_signal("sdmmc5_cmd.sdmmc5_cmd",
|
|
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
|
|
omap_mux_init_signal("sdmmc5_clk.sdmmc5_clk",
|
|
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
|
|
omap_mux_init_signal("sdmmc5_dat0.sdmmc5_dat0",
|
|
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
|
|
omap_mux_init_signal("sdmmc5_dat1.sdmmc5_dat1",
|
|
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
|
|
omap_mux_init_signal("sdmmc5_dat2.sdmmc5_dat2",
|
|
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
|
|
omap_mux_init_signal("sdmmc5_dat3.sdmmc5_dat3",
|
|
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
|
|
|
|
}
|
|
|
|
static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
|
|
.irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
|
|
.board_ref_clock = WL12XX_REFCLOCK_26,
|
|
.board_tcxo_clock = WL12XX_TCXOCLOCK_26,
|
|
};
|
|
|
|
static void omap4_sdp4430_wifi_init(void)
|
|
{
|
|
omap4_sdp4430_wifi_mux_init();
|
|
if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data))
|
|
pr_err("Error setting wl12xx data\n");
|
|
platform_device_register(&omap_vwlan_device);
|
|
}
|
|
|
|
static void __init omap_4430sdp_init(void)
|
|
{
|
|
int status;
|
|
int package = OMAP_PACKAGE_CBS;
|
|
|
|
if (omap_rev() == OMAP4430_REV_ES1_0)
|
|
package = OMAP_PACKAGE_CBL;
|
|
omap4_mux_init(board_mux, NULL, package);
|
|
|
|
omap_board_config = sdp4430_config;
|
|
omap_board_config_size = ARRAY_SIZE(sdp4430_config);
|
|
|
|
omap4_i2c_init();
|
|
omap_sfh7741prox_init();
|
|
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
|
|
board_serial_init();
|
|
omap4_sdp4430_wifi_init();
|
|
omap4_twl6030_hsmmc_init(mmc);
|
|
|
|
usb_musb_init(&musb_board_data);
|
|
|
|
status = omap_ethernet_init();
|
|
if (status) {
|
|
pr_err("Ethernet initialization failed: %d\n", status);
|
|
} else {
|
|
sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
|
|
spi_register_board_info(sdp4430_spi_board_info,
|
|
ARRAY_SIZE(sdp4430_spi_board_info));
|
|
}
|
|
|
|
status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
|
|
if (status)
|
|
pr_err("Keypad initialization failed: %d\n", status);
|
|
|
|
omap_4430sdp_display_init();
|
|
}
|
|
|
|
static void __init omap_4430sdp_map_io(void)
|
|
{
|
|
omap2_set_globals_443x();
|
|
omap44xx_map_common_io();
|
|
}
|
|
|
|
MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
|
|
/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
|
|
.boot_params = 0x80000100,
|
|
.reserve = omap_reserve,
|
|
.map_io = omap_4430sdp_map_io,
|
|
.init_early = omap_4430sdp_init_early,
|
|
.init_irq = gic_init_irq,
|
|
.init_machine = omap_4430sdp_init,
|
|
.timer = &omap4_timer,
|
|
MACHINE_END
|