mirror of https://gitee.com/openkylin/linux.git
752 lines
20 KiB
C
752 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Secure Element driver for STMicroelectronics NFC NCI chip
|
|
*
|
|
* Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/nfc.h>
|
|
#include <linux/delay.h>
|
|
#include <net/nfc/nci.h>
|
|
#include <net/nfc/nci_core.h>
|
|
|
|
#include "st-nci.h"
|
|
|
|
struct st_nci_pipe_info {
|
|
u8 pipe_state;
|
|
u8 src_host_id;
|
|
u8 src_gate_id;
|
|
u8 dst_host_id;
|
|
u8 dst_gate_id;
|
|
} __packed;
|
|
|
|
/* Hosts */
|
|
#define ST_NCI_HOST_CONTROLLER_ID 0x00
|
|
#define ST_NCI_TERMINAL_HOST_ID 0x01
|
|
#define ST_NCI_UICC_HOST_ID 0x02
|
|
#define ST_NCI_ESE_HOST_ID 0xc0
|
|
|
|
/* Gates */
|
|
#define ST_NCI_APDU_READER_GATE 0xf0
|
|
#define ST_NCI_CONNECTIVITY_GATE 0x41
|
|
|
|
/* Pipes */
|
|
#define ST_NCI_DEVICE_MGNT_PIPE 0x02
|
|
|
|
/* Connectivity pipe only */
|
|
#define ST_NCI_SE_COUNT_PIPE_UICC 0x01
|
|
/* Connectivity + APDU Reader pipe */
|
|
#define ST_NCI_SE_COUNT_PIPE_EMBEDDED 0x02
|
|
|
|
#define ST_NCI_SE_TO_HOT_PLUG 1000 /* msecs */
|
|
#define ST_NCI_SE_TO_PIPES 2000
|
|
|
|
#define ST_NCI_EVT_HOT_PLUG_IS_INHIBITED(x) (x->data[0] & 0x80)
|
|
|
|
#define NCI_HCI_APDU_PARAM_ATR 0x01
|
|
#define NCI_HCI_ADMIN_PARAM_SESSION_IDENTITY 0x01
|
|
#define NCI_HCI_ADMIN_PARAM_WHITELIST 0x03
|
|
#define NCI_HCI_ADMIN_PARAM_HOST_LIST 0x04
|
|
|
|
#define ST_NCI_EVT_SE_HARD_RESET 0x20
|
|
#define ST_NCI_EVT_TRANSMIT_DATA 0x10
|
|
#define ST_NCI_EVT_WTX_REQUEST 0x11
|
|
#define ST_NCI_EVT_SE_SOFT_RESET 0x11
|
|
#define ST_NCI_EVT_SE_END_OF_APDU_TRANSFER 0x21
|
|
#define ST_NCI_EVT_HOT_PLUG 0x03
|
|
|
|
#define ST_NCI_SE_MODE_OFF 0x00
|
|
#define ST_NCI_SE_MODE_ON 0x01
|
|
|
|
#define ST_NCI_EVT_CONNECTIVITY 0x10
|
|
#define ST_NCI_EVT_TRANSACTION 0x12
|
|
|
|
#define ST_NCI_DM_GETINFO 0x13
|
|
#define ST_NCI_DM_GETINFO_PIPE_LIST 0x02
|
|
#define ST_NCI_DM_GETINFO_PIPE_INFO 0x01
|
|
#define ST_NCI_DM_PIPE_CREATED 0x02
|
|
#define ST_NCI_DM_PIPE_OPEN 0x04
|
|
#define ST_NCI_DM_RF_ACTIVE 0x80
|
|
#define ST_NCI_DM_DISCONNECT 0x30
|
|
|
|
#define ST_NCI_DM_IS_PIPE_OPEN(p) \
|
|
((p & 0x0f) == (ST_NCI_DM_PIPE_CREATED | ST_NCI_DM_PIPE_OPEN))
|
|
|
|
#define ST_NCI_ATR_DEFAULT_BWI 0x04
|
|
|
|
/*
|
|
* WT = 2^BWI/10[s], convert into msecs and add a secure
|
|
* room by increasing by 2 this timeout
|
|
*/
|
|
#define ST_NCI_BWI_TO_TIMEOUT(x) ((1 << x) * 200)
|
|
#define ST_NCI_ATR_GET_Y_FROM_TD(x) (x >> 4)
|
|
|
|
/* If TA is present bit 0 is set */
|
|
#define ST_NCI_ATR_TA_PRESENT(x) (x & 0x01)
|
|
/* If TB is present bit 1 is set */
|
|
#define ST_NCI_ATR_TB_PRESENT(x) (x & 0x02)
|
|
|
|
#define ST_NCI_NUM_DEVICES 256
|
|
|
|
static DECLARE_BITMAP(dev_mask, ST_NCI_NUM_DEVICES);
|
|
|
|
/* Here are the mandatory pipe for st_nci */
|
|
static struct nci_hci_gate st_nci_gates[] = {
|
|
{NCI_HCI_ADMIN_GATE, NCI_HCI_ADMIN_PIPE,
|
|
ST_NCI_HOST_CONTROLLER_ID},
|
|
{NCI_HCI_LINK_MGMT_GATE, NCI_HCI_LINK_MGMT_PIPE,
|
|
ST_NCI_HOST_CONTROLLER_ID},
|
|
{ST_NCI_DEVICE_MGNT_GATE, ST_NCI_DEVICE_MGNT_PIPE,
|
|
ST_NCI_HOST_CONTROLLER_ID},
|
|
|
|
{NCI_HCI_IDENTITY_MGMT_GATE, NCI_HCI_INVALID_PIPE,
|
|
ST_NCI_HOST_CONTROLLER_ID},
|
|
|
|
/* Secure element pipes are created by secure element host */
|
|
{ST_NCI_CONNECTIVITY_GATE, NCI_HCI_DO_NOT_OPEN_PIPE,
|
|
ST_NCI_HOST_CONTROLLER_ID},
|
|
{ST_NCI_APDU_READER_GATE, NCI_HCI_DO_NOT_OPEN_PIPE,
|
|
ST_NCI_HOST_CONTROLLER_ID},
|
|
};
|
|
|
|
static u8 st_nci_se_get_bwi(struct nci_dev *ndev)
|
|
{
|
|
int i;
|
|
u8 td;
|
|
struct st_nci_info *info = nci_get_drvdata(ndev);
|
|
|
|
/* Bits 8 to 5 of the first TB for T=1 encode BWI from zero to nine */
|
|
for (i = 1; i < ST_NCI_ESE_MAX_LENGTH; i++) {
|
|
td = ST_NCI_ATR_GET_Y_FROM_TD(info->se_info.atr[i]);
|
|
if (ST_NCI_ATR_TA_PRESENT(td))
|
|
i++;
|
|
if (ST_NCI_ATR_TB_PRESENT(td)) {
|
|
i++;
|
|
return info->se_info.atr[i] >> 4;
|
|
}
|
|
}
|
|
return ST_NCI_ATR_DEFAULT_BWI;
|
|
}
|
|
|
|
static void st_nci_se_get_atr(struct nci_dev *ndev)
|
|
{
|
|
struct st_nci_info *info = nci_get_drvdata(ndev);
|
|
int r;
|
|
struct sk_buff *skb;
|
|
|
|
r = nci_hci_get_param(ndev, ST_NCI_APDU_READER_GATE,
|
|
NCI_HCI_APDU_PARAM_ATR, &skb);
|
|
if (r < 0)
|
|
return;
|
|
|
|
if (skb->len <= ST_NCI_ESE_MAX_LENGTH) {
|
|
memcpy(info->se_info.atr, skb->data, skb->len);
|
|
|
|
info->se_info.wt_timeout =
|
|
ST_NCI_BWI_TO_TIMEOUT(st_nci_se_get_bwi(ndev));
|
|
}
|
|
kfree_skb(skb);
|
|
}
|
|
|
|
int st_nci_hci_load_session(struct nci_dev *ndev)
|
|
{
|
|
int i, j, r;
|
|
struct sk_buff *skb_pipe_list, *skb_pipe_info;
|
|
struct st_nci_pipe_info *dm_pipe_info;
|
|
u8 pipe_list[] = { ST_NCI_DM_GETINFO_PIPE_LIST,
|
|
ST_NCI_TERMINAL_HOST_ID};
|
|
u8 pipe_info[] = { ST_NCI_DM_GETINFO_PIPE_INFO,
|
|
ST_NCI_TERMINAL_HOST_ID, 0};
|
|
|
|
/* On ST_NCI device pipes number are dynamics
|
|
* If pipes are already created, hci_dev_up will fail.
|
|
* Doing a clear all pipe is a bad idea because:
|
|
* - It does useless EEPROM cycling
|
|
* - It might cause issue for secure elements support
|
|
* (such as removing connectivity or APDU reader pipe)
|
|
* A better approach on ST_NCI is to:
|
|
* - get a pipe list for each host.
|
|
* (eg: ST_NCI_HOST_CONTROLLER_ID for now).
|
|
* (TODO Later on UICC HOST and eSE HOST)
|
|
* - get pipe information
|
|
* - match retrieved pipe list in st_nci_gates
|
|
* ST_NCI_DEVICE_MGNT_GATE is a proprietary gate
|
|
* with ST_NCI_DEVICE_MGNT_PIPE.
|
|
* Pipe can be closed and need to be open.
|
|
*/
|
|
r = nci_hci_connect_gate(ndev, ST_NCI_HOST_CONTROLLER_ID,
|
|
ST_NCI_DEVICE_MGNT_GATE,
|
|
ST_NCI_DEVICE_MGNT_PIPE);
|
|
if (r < 0)
|
|
return r;
|
|
|
|
/* Get pipe list */
|
|
r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
|
|
ST_NCI_DM_GETINFO, pipe_list, sizeof(pipe_list),
|
|
&skb_pipe_list);
|
|
if (r < 0)
|
|
return r;
|
|
|
|
/* Complete the existing gate_pipe table */
|
|
for (i = 0; i < skb_pipe_list->len; i++) {
|
|
pipe_info[2] = skb_pipe_list->data[i];
|
|
r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
|
|
ST_NCI_DM_GETINFO, pipe_info,
|
|
sizeof(pipe_info), &skb_pipe_info);
|
|
|
|
if (r)
|
|
continue;
|
|
|
|
/*
|
|
* Match pipe ID and gate ID
|
|
* Output format from ST21NFC_DM_GETINFO is:
|
|
* - pipe state (1byte)
|
|
* - source hid (1byte)
|
|
* - source gid (1byte)
|
|
* - destination hid (1byte)
|
|
* - destination gid (1byte)
|
|
*/
|
|
dm_pipe_info = (struct st_nci_pipe_info *)skb_pipe_info->data;
|
|
if (dm_pipe_info->dst_gate_id == ST_NCI_APDU_READER_GATE &&
|
|
dm_pipe_info->src_host_id == ST_NCI_UICC_HOST_ID) {
|
|
pr_err("Unexpected apdu_reader pipe on host %x\n",
|
|
dm_pipe_info->src_host_id);
|
|
kfree_skb(skb_pipe_info);
|
|
continue;
|
|
}
|
|
|
|
for (j = 3; (j < ARRAY_SIZE(st_nci_gates)) &&
|
|
(st_nci_gates[j].gate != dm_pipe_info->dst_gate_id); j++)
|
|
;
|
|
|
|
if (j < ARRAY_SIZE(st_nci_gates) &&
|
|
st_nci_gates[j].gate == dm_pipe_info->dst_gate_id &&
|
|
ST_NCI_DM_IS_PIPE_OPEN(dm_pipe_info->pipe_state)) {
|
|
ndev->hci_dev->init_data.gates[j].pipe = pipe_info[2];
|
|
|
|
ndev->hci_dev->gate2pipe[st_nci_gates[j].gate] =
|
|
pipe_info[2];
|
|
ndev->hci_dev->pipes[pipe_info[2]].gate =
|
|
st_nci_gates[j].gate;
|
|
ndev->hci_dev->pipes[pipe_info[2]].host =
|
|
dm_pipe_info->src_host_id;
|
|
}
|
|
kfree_skb(skb_pipe_info);
|
|
}
|
|
|
|
/*
|
|
* 3 gates have a well known pipe ID. Only NCI_HCI_LINK_MGMT_GATE
|
|
* is not yet open at this stage.
|
|
*/
|
|
r = nci_hci_connect_gate(ndev, ST_NCI_HOST_CONTROLLER_ID,
|
|
NCI_HCI_LINK_MGMT_GATE,
|
|
NCI_HCI_LINK_MGMT_PIPE);
|
|
|
|
kfree_skb(skb_pipe_list);
|
|
return r;
|
|
}
|
|
EXPORT_SYMBOL_GPL(st_nci_hci_load_session);
|
|
|
|
static void st_nci_hci_admin_event_received(struct nci_dev *ndev,
|
|
u8 event, struct sk_buff *skb)
|
|
{
|
|
struct st_nci_info *info = nci_get_drvdata(ndev);
|
|
|
|
switch (event) {
|
|
case ST_NCI_EVT_HOT_PLUG:
|
|
if (info->se_info.se_active) {
|
|
if (!ST_NCI_EVT_HOT_PLUG_IS_INHIBITED(skb)) {
|
|
del_timer_sync(&info->se_info.se_active_timer);
|
|
info->se_info.se_active = false;
|
|
complete(&info->se_info.req_completion);
|
|
} else {
|
|
mod_timer(&info->se_info.se_active_timer,
|
|
jiffies +
|
|
msecs_to_jiffies(ST_NCI_SE_TO_PIPES));
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
nfc_err(&ndev->nfc_dev->dev, "Unexpected event on admin gate\n");
|
|
}
|
|
}
|
|
|
|
static int st_nci_hci_apdu_reader_event_received(struct nci_dev *ndev,
|
|
u8 event,
|
|
struct sk_buff *skb)
|
|
{
|
|
int r = 0;
|
|
struct st_nci_info *info = nci_get_drvdata(ndev);
|
|
|
|
pr_debug("apdu reader gate event: %x\n", event);
|
|
|
|
switch (event) {
|
|
case ST_NCI_EVT_TRANSMIT_DATA:
|
|
del_timer_sync(&info->se_info.bwi_timer);
|
|
info->se_info.bwi_active = false;
|
|
info->se_info.cb(info->se_info.cb_context,
|
|
skb->data, skb->len, 0);
|
|
break;
|
|
case ST_NCI_EVT_WTX_REQUEST:
|
|
mod_timer(&info->se_info.bwi_timer, jiffies +
|
|
msecs_to_jiffies(info->se_info.wt_timeout));
|
|
break;
|
|
default:
|
|
nfc_err(&ndev->nfc_dev->dev, "Unexpected event on apdu reader gate\n");
|
|
return 1;
|
|
}
|
|
|
|
kfree_skb(skb);
|
|
return r;
|
|
}
|
|
|
|
/*
|
|
* Returns:
|
|
* <= 0: driver handled the event, skb consumed
|
|
* 1: driver does not handle the event, please do standard processing
|
|
*/
|
|
static int st_nci_hci_connectivity_event_received(struct nci_dev *ndev,
|
|
u8 host, u8 event,
|
|
struct sk_buff *skb)
|
|
{
|
|
int r = 0;
|
|
struct device *dev = &ndev->nfc_dev->dev;
|
|
struct nfc_evt_transaction *transaction;
|
|
|
|
pr_debug("connectivity gate event: %x\n", event);
|
|
|
|
switch (event) {
|
|
case ST_NCI_EVT_CONNECTIVITY:
|
|
r = nfc_se_connectivity(ndev->nfc_dev, host);
|
|
break;
|
|
case ST_NCI_EVT_TRANSACTION:
|
|
/* According to specification etsi 102 622
|
|
* 11.2.2.4 EVT_TRANSACTION Table 52
|
|
* Description Tag Length
|
|
* AID 81 5 to 16
|
|
* PARAMETERS 82 0 to 255
|
|
*/
|
|
if (skb->len < NFC_MIN_AID_LENGTH + 2 &&
|
|
skb->data[0] != NFC_EVT_TRANSACTION_AID_TAG)
|
|
return -EPROTO;
|
|
|
|
transaction = (struct nfc_evt_transaction *)devm_kzalloc(dev,
|
|
skb->len - 2, GFP_KERNEL);
|
|
if (!transaction)
|
|
return -ENOMEM;
|
|
|
|
transaction->aid_len = skb->data[1];
|
|
memcpy(transaction->aid, &skb->data[2], transaction->aid_len);
|
|
|
|
/* Check next byte is PARAMETERS tag (82) */
|
|
if (skb->data[transaction->aid_len + 2] !=
|
|
NFC_EVT_TRANSACTION_PARAMS_TAG)
|
|
return -EPROTO;
|
|
|
|
transaction->params_len = skb->data[transaction->aid_len + 3];
|
|
memcpy(transaction->params, skb->data +
|
|
transaction->aid_len + 4, transaction->params_len);
|
|
|
|
r = nfc_se_transaction(ndev->nfc_dev, host, transaction);
|
|
break;
|
|
default:
|
|
nfc_err(&ndev->nfc_dev->dev, "Unexpected event on connectivity gate\n");
|
|
return 1;
|
|
}
|
|
kfree_skb(skb);
|
|
return r;
|
|
}
|
|
|
|
void st_nci_hci_event_received(struct nci_dev *ndev, u8 pipe,
|
|
u8 event, struct sk_buff *skb)
|
|
{
|
|
u8 gate = ndev->hci_dev->pipes[pipe].gate;
|
|
u8 host = ndev->hci_dev->pipes[pipe].host;
|
|
|
|
switch (gate) {
|
|
case NCI_HCI_ADMIN_GATE:
|
|
st_nci_hci_admin_event_received(ndev, event, skb);
|
|
break;
|
|
case ST_NCI_APDU_READER_GATE:
|
|
st_nci_hci_apdu_reader_event_received(ndev, event, skb);
|
|
break;
|
|
case ST_NCI_CONNECTIVITY_GATE:
|
|
st_nci_hci_connectivity_event_received(ndev, host, event, skb);
|
|
break;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(st_nci_hci_event_received);
|
|
|
|
void st_nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe, u8 cmd,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct st_nci_info *info = nci_get_drvdata(ndev);
|
|
u8 gate = ndev->hci_dev->pipes[pipe].gate;
|
|
|
|
pr_debug("cmd: %x\n", cmd);
|
|
|
|
switch (cmd) {
|
|
case NCI_HCI_ANY_OPEN_PIPE:
|
|
if (gate != ST_NCI_APDU_READER_GATE &&
|
|
ndev->hci_dev->pipes[pipe].host != ST_NCI_UICC_HOST_ID)
|
|
ndev->hci_dev->count_pipes++;
|
|
|
|
if (ndev->hci_dev->count_pipes ==
|
|
ndev->hci_dev->expected_pipes) {
|
|
del_timer_sync(&info->se_info.se_active_timer);
|
|
info->se_info.se_active = false;
|
|
ndev->hci_dev->count_pipes = 0;
|
|
complete(&info->se_info.req_completion);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(st_nci_hci_cmd_received);
|
|
|
|
static int st_nci_control_se(struct nci_dev *ndev, u8 se_idx,
|
|
u8 state)
|
|
{
|
|
struct st_nci_info *info = nci_get_drvdata(ndev);
|
|
int r, i;
|
|
struct sk_buff *sk_host_list;
|
|
u8 host_id;
|
|
|
|
switch (se_idx) {
|
|
case ST_NCI_UICC_HOST_ID:
|
|
ndev->hci_dev->count_pipes = 0;
|
|
ndev->hci_dev->expected_pipes = ST_NCI_SE_COUNT_PIPE_UICC;
|
|
break;
|
|
case ST_NCI_ESE_HOST_ID:
|
|
ndev->hci_dev->count_pipes = 0;
|
|
ndev->hci_dev->expected_pipes = ST_NCI_SE_COUNT_PIPE_EMBEDDED;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Wait for an EVT_HOT_PLUG in order to
|
|
* retrieve a relevant host list.
|
|
*/
|
|
reinit_completion(&info->se_info.req_completion);
|
|
r = nci_nfcee_mode_set(ndev, se_idx, state);
|
|
if (r != NCI_STATUS_OK)
|
|
return r;
|
|
|
|
mod_timer(&info->se_info.se_active_timer, jiffies +
|
|
msecs_to_jiffies(ST_NCI_SE_TO_HOT_PLUG));
|
|
info->se_info.se_active = true;
|
|
|
|
/* Ignore return value and check in any case the host_list */
|
|
wait_for_completion_interruptible(&info->se_info.req_completion);
|
|
|
|
/* There might be some "collision" after receiving a HOT_PLUG event
|
|
* This may cause the CLF to not answer to the next hci command.
|
|
* There is no possible synchronization to prevent this.
|
|
* Adding a small delay is the only way to solve the issue.
|
|
*/
|
|
if (info->se_info.se_status->is_ese_present &&
|
|
info->se_info.se_status->is_uicc_present)
|
|
usleep_range(15000, 20000);
|
|
|
|
r = nci_hci_get_param(ndev, NCI_HCI_ADMIN_GATE,
|
|
NCI_HCI_ADMIN_PARAM_HOST_LIST, &sk_host_list);
|
|
if (r != NCI_HCI_ANY_OK)
|
|
return r;
|
|
|
|
for (i = 0; i < sk_host_list->len &&
|
|
sk_host_list->data[i] != se_idx; i++)
|
|
;
|
|
host_id = sk_host_list->data[i];
|
|
kfree_skb(sk_host_list);
|
|
if (state == ST_NCI_SE_MODE_ON && host_id == se_idx)
|
|
return se_idx;
|
|
else if (state == ST_NCI_SE_MODE_OFF && host_id != se_idx)
|
|
return se_idx;
|
|
|
|
return -1;
|
|
}
|
|
|
|
int st_nci_disable_se(struct nci_dev *ndev, u32 se_idx)
|
|
{
|
|
int r;
|
|
|
|
pr_debug("st_nci_disable_se\n");
|
|
|
|
/*
|
|
* According to upper layer, se_idx == NFC_SE_UICC when
|
|
* info->se_info.se_status->is_uicc_enable is true should never happen
|
|
* Same for eSE.
|
|
*/
|
|
r = st_nci_control_se(ndev, se_idx, ST_NCI_SE_MODE_OFF);
|
|
if (r < 0) {
|
|
/* Do best effort to release SWP */
|
|
if (se_idx == NFC_SE_EMBEDDED) {
|
|
r = nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE,
|
|
ST_NCI_EVT_SE_END_OF_APDU_TRANSFER,
|
|
NULL, 0);
|
|
}
|
|
return r;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(st_nci_disable_se);
|
|
|
|
int st_nci_enable_se(struct nci_dev *ndev, u32 se_idx)
|
|
{
|
|
int r;
|
|
|
|
pr_debug("st_nci_enable_se\n");
|
|
|
|
/*
|
|
* According to upper layer, se_idx == NFC_SE_UICC when
|
|
* info->se_info.se_status->is_uicc_enable is true should never happen.
|
|
* Same for eSE.
|
|
*/
|
|
r = st_nci_control_se(ndev, se_idx, ST_NCI_SE_MODE_ON);
|
|
if (r == ST_NCI_ESE_HOST_ID) {
|
|
st_nci_se_get_atr(ndev);
|
|
r = nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE,
|
|
ST_NCI_EVT_SE_SOFT_RESET, NULL, 0);
|
|
}
|
|
|
|
if (r < 0) {
|
|
/*
|
|
* The activation procedure failed, the secure element
|
|
* is not connected. Remove from the list.
|
|
*/
|
|
nfc_remove_se(ndev->nfc_dev, se_idx);
|
|
return r;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(st_nci_enable_se);
|
|
|
|
static int st_nci_hci_network_init(struct nci_dev *ndev)
|
|
{
|
|
struct st_nci_info *info = nci_get_drvdata(ndev);
|
|
struct core_conn_create_dest_spec_params *dest_params;
|
|
struct dest_spec_params spec_params;
|
|
struct nci_conn_info *conn_info;
|
|
int r, dev_num;
|
|
|
|
dest_params =
|
|
kzalloc(sizeof(struct core_conn_create_dest_spec_params) +
|
|
sizeof(struct dest_spec_params), GFP_KERNEL);
|
|
if (dest_params == NULL) {
|
|
r = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
|
|
dest_params->type = NCI_DESTINATION_SPECIFIC_PARAM_NFCEE_TYPE;
|
|
dest_params->length = sizeof(struct dest_spec_params);
|
|
spec_params.id = ndev->hci_dev->nfcee_id;
|
|
spec_params.protocol = NCI_NFCEE_INTERFACE_HCI_ACCESS;
|
|
memcpy(dest_params->value, &spec_params,
|
|
sizeof(struct dest_spec_params));
|
|
r = nci_core_conn_create(ndev, NCI_DESTINATION_NFCEE, 1,
|
|
sizeof(struct core_conn_create_dest_spec_params) +
|
|
sizeof(struct dest_spec_params),
|
|
dest_params);
|
|
if (r != NCI_STATUS_OK)
|
|
goto free_dest_params;
|
|
|
|
conn_info = ndev->hci_dev->conn_info;
|
|
if (!conn_info)
|
|
goto free_dest_params;
|
|
|
|
ndev->hci_dev->init_data.gate_count = ARRAY_SIZE(st_nci_gates);
|
|
memcpy(ndev->hci_dev->init_data.gates, st_nci_gates,
|
|
sizeof(st_nci_gates));
|
|
|
|
/*
|
|
* Session id must include the driver name + i2c bus addr
|
|
* persistent info to discriminate 2 identical chips
|
|
*/
|
|
dev_num = find_first_zero_bit(dev_mask, ST_NCI_NUM_DEVICES);
|
|
if (dev_num >= ST_NCI_NUM_DEVICES) {
|
|
r = -ENODEV;
|
|
goto free_dest_params;
|
|
}
|
|
|
|
scnprintf(ndev->hci_dev->init_data.session_id,
|
|
sizeof(ndev->hci_dev->init_data.session_id),
|
|
"%s%2x", "ST21BH", dev_num);
|
|
|
|
r = nci_hci_dev_session_init(ndev);
|
|
if (r != NCI_HCI_ANY_OK)
|
|
goto free_dest_params;
|
|
|
|
/*
|
|
* In factory mode, we prevent secure elements activation
|
|
* by disabling nfcee on the current HCI connection id.
|
|
* HCI will be used here only for proprietary commands.
|
|
*/
|
|
if (test_bit(ST_NCI_FACTORY_MODE, &info->flags))
|
|
r = nci_nfcee_mode_set(ndev,
|
|
ndev->hci_dev->conn_info->dest_params->id,
|
|
NCI_NFCEE_DISABLE);
|
|
else
|
|
r = nci_nfcee_mode_set(ndev,
|
|
ndev->hci_dev->conn_info->dest_params->id,
|
|
NCI_NFCEE_ENABLE);
|
|
|
|
free_dest_params:
|
|
kfree(dest_params);
|
|
|
|
exit:
|
|
return r;
|
|
}
|
|
|
|
int st_nci_discover_se(struct nci_dev *ndev)
|
|
{
|
|
u8 white_list[2];
|
|
int r, wl_size = 0;
|
|
int se_count = 0;
|
|
struct st_nci_info *info = nci_get_drvdata(ndev);
|
|
|
|
pr_debug("st_nci_discover_se\n");
|
|
|
|
r = st_nci_hci_network_init(ndev);
|
|
if (r != 0)
|
|
return r;
|
|
|
|
if (test_bit(ST_NCI_FACTORY_MODE, &info->flags))
|
|
return 0;
|
|
|
|
if (info->se_info.se_status->is_uicc_present)
|
|
white_list[wl_size++] = ST_NCI_UICC_HOST_ID;
|
|
if (info->se_info.se_status->is_ese_present)
|
|
white_list[wl_size++] = ST_NCI_ESE_HOST_ID;
|
|
|
|
if (wl_size) {
|
|
r = nci_hci_set_param(ndev, NCI_HCI_ADMIN_GATE,
|
|
NCI_HCI_ADMIN_PARAM_WHITELIST,
|
|
white_list, wl_size);
|
|
if (r != NCI_HCI_ANY_OK)
|
|
return r;
|
|
}
|
|
|
|
if (info->se_info.se_status->is_uicc_present) {
|
|
nfc_add_se(ndev->nfc_dev, ST_NCI_UICC_HOST_ID, NFC_SE_UICC);
|
|
se_count++;
|
|
}
|
|
|
|
if (info->se_info.se_status->is_ese_present) {
|
|
nfc_add_se(ndev->nfc_dev, ST_NCI_ESE_HOST_ID, NFC_SE_EMBEDDED);
|
|
se_count++;
|
|
}
|
|
|
|
return !se_count;
|
|
}
|
|
EXPORT_SYMBOL_GPL(st_nci_discover_se);
|
|
|
|
int st_nci_se_io(struct nci_dev *ndev, u32 se_idx,
|
|
u8 *apdu, size_t apdu_length,
|
|
se_io_cb_t cb, void *cb_context)
|
|
{
|
|
struct st_nci_info *info = nci_get_drvdata(ndev);
|
|
|
|
pr_debug("\n");
|
|
|
|
switch (se_idx) {
|
|
case ST_NCI_ESE_HOST_ID:
|
|
info->se_info.cb = cb;
|
|
info->se_info.cb_context = cb_context;
|
|
mod_timer(&info->se_info.bwi_timer, jiffies +
|
|
msecs_to_jiffies(info->se_info.wt_timeout));
|
|
info->se_info.bwi_active = true;
|
|
return nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE,
|
|
ST_NCI_EVT_TRANSMIT_DATA, apdu,
|
|
apdu_length);
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(st_nci_se_io);
|
|
|
|
static void st_nci_se_wt_timeout(struct timer_list *t)
|
|
{
|
|
/*
|
|
* No answer from the secure element
|
|
* within the defined timeout.
|
|
* Let's send a reset request as recovery procedure.
|
|
* According to the situation, we first try to send a software reset
|
|
* to the secure element. If the next command is still not
|
|
* answering in time, we send to the CLF a secure element hardware
|
|
* reset request.
|
|
*/
|
|
/* hardware reset managed through VCC_UICC_OUT power supply */
|
|
u8 param = 0x01;
|
|
struct st_nci_info *info = from_timer(info, t, se_info.bwi_timer);
|
|
|
|
pr_debug("\n");
|
|
|
|
info->se_info.bwi_active = false;
|
|
|
|
if (!info->se_info.xch_error) {
|
|
info->se_info.xch_error = true;
|
|
nci_hci_send_event(info->ndlc->ndev, ST_NCI_APDU_READER_GATE,
|
|
ST_NCI_EVT_SE_SOFT_RESET, NULL, 0);
|
|
} else {
|
|
info->se_info.xch_error = false;
|
|
nci_hci_send_event(info->ndlc->ndev, ST_NCI_DEVICE_MGNT_GATE,
|
|
ST_NCI_EVT_SE_HARD_RESET, ¶m, 1);
|
|
}
|
|
info->se_info.cb(info->se_info.cb_context, NULL, 0, -ETIME);
|
|
}
|
|
|
|
static void st_nci_se_activation_timeout(struct timer_list *t)
|
|
{
|
|
struct st_nci_info *info = from_timer(info, t,
|
|
se_info.se_active_timer);
|
|
|
|
pr_debug("\n");
|
|
|
|
info->se_info.se_active = false;
|
|
|
|
complete(&info->se_info.req_completion);
|
|
}
|
|
|
|
int st_nci_se_init(struct nci_dev *ndev, struct st_nci_se_status *se_status)
|
|
{
|
|
struct st_nci_info *info = nci_get_drvdata(ndev);
|
|
|
|
init_completion(&info->se_info.req_completion);
|
|
/* initialize timers */
|
|
timer_setup(&info->se_info.bwi_timer, st_nci_se_wt_timeout, 0);
|
|
info->se_info.bwi_active = false;
|
|
|
|
timer_setup(&info->se_info.se_active_timer,
|
|
st_nci_se_activation_timeout, 0);
|
|
info->se_info.se_active = false;
|
|
|
|
info->se_info.xch_error = false;
|
|
|
|
info->se_info.wt_timeout =
|
|
ST_NCI_BWI_TO_TIMEOUT(ST_NCI_ATR_DEFAULT_BWI);
|
|
|
|
info->se_info.se_status = se_status;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(st_nci_se_init);
|
|
|
|
void st_nci_se_deinit(struct nci_dev *ndev)
|
|
{
|
|
struct st_nci_info *info = nci_get_drvdata(ndev);
|
|
|
|
if (info->se_info.bwi_active)
|
|
del_timer_sync(&info->se_info.bwi_timer);
|
|
if (info->se_info.se_active)
|
|
del_timer_sync(&info->se_info.se_active_timer);
|
|
|
|
info->se_info.se_active = false;
|
|
info->se_info.bwi_active = false;
|
|
}
|
|
EXPORT_SYMBOL(st_nci_se_deinit);
|
|
|