mirror of https://gitee.com/openkylin/linux.git
854 lines
22 KiB
C
854 lines
22 KiB
C
/*
|
|
* Atmel ADC driver for SAMA5D2 devices and compatible.
|
|
*
|
|
* Copyright (C) 2015 Atmel,
|
|
* 2015 Ludovic Desroches <ludovic.desroches@atmel.com>
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
/* Control Register */
|
|
#define AT91_SAMA5D2_CR 0x00
|
|
/* Software Reset */
|
|
#define AT91_SAMA5D2_CR_SWRST BIT(0)
|
|
/* Start Conversion */
|
|
#define AT91_SAMA5D2_CR_START BIT(1)
|
|
/* Touchscreen Calibration */
|
|
#define AT91_SAMA5D2_CR_TSCALIB BIT(2)
|
|
/* Comparison Restart */
|
|
#define AT91_SAMA5D2_CR_CMPRST BIT(4)
|
|
|
|
/* Mode Register */
|
|
#define AT91_SAMA5D2_MR 0x04
|
|
/* Trigger Selection */
|
|
#define AT91_SAMA5D2_MR_TRGSEL(v) ((v) << 1)
|
|
/* ADTRG */
|
|
#define AT91_SAMA5D2_MR_TRGSEL_TRIG0 0
|
|
/* TIOA0 */
|
|
#define AT91_SAMA5D2_MR_TRGSEL_TRIG1 1
|
|
/* TIOA1 */
|
|
#define AT91_SAMA5D2_MR_TRGSEL_TRIG2 2
|
|
/* TIOA2 */
|
|
#define AT91_SAMA5D2_MR_TRGSEL_TRIG3 3
|
|
/* PWM event line 0 */
|
|
#define AT91_SAMA5D2_MR_TRGSEL_TRIG4 4
|
|
/* PWM event line 1 */
|
|
#define AT91_SAMA5D2_MR_TRGSEL_TRIG5 5
|
|
/* TIOA3 */
|
|
#define AT91_SAMA5D2_MR_TRGSEL_TRIG6 6
|
|
/* RTCOUT0 */
|
|
#define AT91_SAMA5D2_MR_TRGSEL_TRIG7 7
|
|
/* Sleep Mode */
|
|
#define AT91_SAMA5D2_MR_SLEEP BIT(5)
|
|
/* Fast Wake Up */
|
|
#define AT91_SAMA5D2_MR_FWUP BIT(6)
|
|
/* Prescaler Rate Selection */
|
|
#define AT91_SAMA5D2_MR_PRESCAL(v) ((v) << AT91_SAMA5D2_MR_PRESCAL_OFFSET)
|
|
#define AT91_SAMA5D2_MR_PRESCAL_OFFSET 8
|
|
#define AT91_SAMA5D2_MR_PRESCAL_MAX 0xff
|
|
#define AT91_SAMA5D2_MR_PRESCAL_MASK GENMASK(15, 8)
|
|
/* Startup Time */
|
|
#define AT91_SAMA5D2_MR_STARTUP(v) ((v) << 16)
|
|
#define AT91_SAMA5D2_MR_STARTUP_MASK GENMASK(19, 16)
|
|
/* Analog Change */
|
|
#define AT91_SAMA5D2_MR_ANACH BIT(23)
|
|
/* Tracking Time */
|
|
#define AT91_SAMA5D2_MR_TRACKTIM(v) ((v) << 24)
|
|
#define AT91_SAMA5D2_MR_TRACKTIM_MAX 0xff
|
|
/* Transfer Time */
|
|
#define AT91_SAMA5D2_MR_TRANSFER(v) ((v) << 28)
|
|
#define AT91_SAMA5D2_MR_TRANSFER_MAX 0x3
|
|
/* Use Sequence Enable */
|
|
#define AT91_SAMA5D2_MR_USEQ BIT(31)
|
|
|
|
/* Channel Sequence Register 1 */
|
|
#define AT91_SAMA5D2_SEQR1 0x08
|
|
/* Channel Sequence Register 2 */
|
|
#define AT91_SAMA5D2_SEQR2 0x0c
|
|
/* Channel Enable Register */
|
|
#define AT91_SAMA5D2_CHER 0x10
|
|
/* Channel Disable Register */
|
|
#define AT91_SAMA5D2_CHDR 0x14
|
|
/* Channel Status Register */
|
|
#define AT91_SAMA5D2_CHSR 0x18
|
|
/* Last Converted Data Register */
|
|
#define AT91_SAMA5D2_LCDR 0x20
|
|
/* Interrupt Enable Register */
|
|
#define AT91_SAMA5D2_IER 0x24
|
|
/* Interrupt Disable Register */
|
|
#define AT91_SAMA5D2_IDR 0x28
|
|
/* Interrupt Mask Register */
|
|
#define AT91_SAMA5D2_IMR 0x2c
|
|
/* Interrupt Status Register */
|
|
#define AT91_SAMA5D2_ISR 0x30
|
|
/* Last Channel Trigger Mode Register */
|
|
#define AT91_SAMA5D2_LCTMR 0x34
|
|
/* Last Channel Compare Window Register */
|
|
#define AT91_SAMA5D2_LCCWR 0x38
|
|
/* Overrun Status Register */
|
|
#define AT91_SAMA5D2_OVER 0x3c
|
|
/* Extended Mode Register */
|
|
#define AT91_SAMA5D2_EMR 0x40
|
|
/* Compare Window Register */
|
|
#define AT91_SAMA5D2_CWR 0x44
|
|
/* Channel Gain Register */
|
|
#define AT91_SAMA5D2_CGR 0x48
|
|
|
|
/* Channel Offset Register */
|
|
#define AT91_SAMA5D2_COR 0x4c
|
|
#define AT91_SAMA5D2_COR_DIFF_OFFSET 16
|
|
|
|
/* Channel Data Register 0 */
|
|
#define AT91_SAMA5D2_CDR0 0x50
|
|
/* Analog Control Register */
|
|
#define AT91_SAMA5D2_ACR 0x94
|
|
/* Touchscreen Mode Register */
|
|
#define AT91_SAMA5D2_TSMR 0xb0
|
|
/* Touchscreen X Position Register */
|
|
#define AT91_SAMA5D2_XPOSR 0xb4
|
|
/* Touchscreen Y Position Register */
|
|
#define AT91_SAMA5D2_YPOSR 0xb8
|
|
/* Touchscreen Pressure Register */
|
|
#define AT91_SAMA5D2_PRESSR 0xbc
|
|
/* Trigger Register */
|
|
#define AT91_SAMA5D2_TRGR 0xc0
|
|
/* Mask for TRGMOD field of TRGR register */
|
|
#define AT91_SAMA5D2_TRGR_TRGMOD_MASK GENMASK(2, 0)
|
|
/* No trigger, only software trigger can start conversions */
|
|
#define AT91_SAMA5D2_TRGR_TRGMOD_NO_TRIGGER 0
|
|
/* Trigger Mode external trigger rising edge */
|
|
#define AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_RISE 1
|
|
/* Trigger Mode external trigger falling edge */
|
|
#define AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_FALL 2
|
|
/* Trigger Mode external trigger any edge */
|
|
#define AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_ANY 3
|
|
|
|
/* Correction Select Register */
|
|
#define AT91_SAMA5D2_COSR 0xd0
|
|
/* Correction Value Register */
|
|
#define AT91_SAMA5D2_CVR 0xd4
|
|
/* Channel Error Correction Register */
|
|
#define AT91_SAMA5D2_CECR 0xd8
|
|
/* Write Protection Mode Register */
|
|
#define AT91_SAMA5D2_WPMR 0xe4
|
|
/* Write Protection Status Register */
|
|
#define AT91_SAMA5D2_WPSR 0xe8
|
|
/* Version Register */
|
|
#define AT91_SAMA5D2_VERSION 0xfc
|
|
|
|
#define AT91_SAMA5D2_HW_TRIG_CNT 3
|
|
#define AT91_SAMA5D2_SINGLE_CHAN_CNT 12
|
|
#define AT91_SAMA5D2_DIFF_CHAN_CNT 6
|
|
|
|
/*
|
|
* Maximum number of bytes to hold conversion from all channels
|
|
* plus the timestamp
|
|
*/
|
|
#define AT91_BUFFER_MAX_BYTES ((AT91_SAMA5D2_SINGLE_CHAN_CNT + \
|
|
AT91_SAMA5D2_DIFF_CHAN_CNT) * 2 + 8)
|
|
|
|
#define AT91_BUFFER_MAX_HWORDS (AT91_BUFFER_MAX_BYTES / 2)
|
|
|
|
#define AT91_SAMA5D2_CHAN_SINGLE(num, addr) \
|
|
{ \
|
|
.type = IIO_VOLTAGE, \
|
|
.channel = num, \
|
|
.address = addr, \
|
|
.scan_index = num, \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.realbits = 12, \
|
|
.storagebits = 16, \
|
|
}, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
|
|
.datasheet_name = "CH"#num, \
|
|
.indexed = 1, \
|
|
}
|
|
|
|
#define AT91_SAMA5D2_CHAN_DIFF(num, num2, addr) \
|
|
{ \
|
|
.type = IIO_VOLTAGE, \
|
|
.differential = 1, \
|
|
.channel = num, \
|
|
.channel2 = num2, \
|
|
.address = addr, \
|
|
.scan_index = num + AT91_SAMA5D2_SINGLE_CHAN_CNT, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = 12, \
|
|
.storagebits = 16, \
|
|
}, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
|
|
.datasheet_name = "CH"#num"-CH"#num2, \
|
|
.indexed = 1, \
|
|
}
|
|
|
|
#define at91_adc_readl(st, reg) readl_relaxed(st->base + reg)
|
|
#define at91_adc_writel(st, reg, val) writel_relaxed(val, st->base + reg)
|
|
|
|
struct at91_adc_soc_info {
|
|
unsigned startup_time;
|
|
unsigned min_sample_rate;
|
|
unsigned max_sample_rate;
|
|
};
|
|
|
|
struct at91_adc_trigger {
|
|
char *name;
|
|
unsigned int trgmod_value;
|
|
unsigned int edge_type;
|
|
};
|
|
|
|
struct at91_adc_state {
|
|
void __iomem *base;
|
|
int irq;
|
|
struct clk *per_clk;
|
|
struct regulator *reg;
|
|
struct regulator *vref;
|
|
int vref_uv;
|
|
struct iio_trigger *trig;
|
|
const struct at91_adc_trigger *selected_trig;
|
|
const struct iio_chan_spec *chan;
|
|
bool conversion_done;
|
|
u32 conversion_value;
|
|
struct at91_adc_soc_info soc_info;
|
|
wait_queue_head_t wq_data_available;
|
|
u16 buffer[AT91_BUFFER_MAX_HWORDS];
|
|
/*
|
|
* lock to prevent concurrent 'single conversion' requests through
|
|
* sysfs.
|
|
*/
|
|
struct mutex lock;
|
|
};
|
|
|
|
static const struct at91_adc_trigger at91_adc_trigger_list[] = {
|
|
{
|
|
.name = "external_rising",
|
|
.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_RISE,
|
|
.edge_type = IRQ_TYPE_EDGE_RISING,
|
|
},
|
|
{
|
|
.name = "external_falling",
|
|
.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_FALL,
|
|
.edge_type = IRQ_TYPE_EDGE_FALLING,
|
|
},
|
|
{
|
|
.name = "external_any",
|
|
.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_ANY,
|
|
.edge_type = IRQ_TYPE_EDGE_BOTH,
|
|
},
|
|
};
|
|
|
|
static const struct iio_chan_spec at91_adc_channels[] = {
|
|
AT91_SAMA5D2_CHAN_SINGLE(0, 0x50),
|
|
AT91_SAMA5D2_CHAN_SINGLE(1, 0x54),
|
|
AT91_SAMA5D2_CHAN_SINGLE(2, 0x58),
|
|
AT91_SAMA5D2_CHAN_SINGLE(3, 0x5c),
|
|
AT91_SAMA5D2_CHAN_SINGLE(4, 0x60),
|
|
AT91_SAMA5D2_CHAN_SINGLE(5, 0x64),
|
|
AT91_SAMA5D2_CHAN_SINGLE(6, 0x68),
|
|
AT91_SAMA5D2_CHAN_SINGLE(7, 0x6c),
|
|
AT91_SAMA5D2_CHAN_SINGLE(8, 0x70),
|
|
AT91_SAMA5D2_CHAN_SINGLE(9, 0x74),
|
|
AT91_SAMA5D2_CHAN_SINGLE(10, 0x78),
|
|
AT91_SAMA5D2_CHAN_SINGLE(11, 0x7c),
|
|
AT91_SAMA5D2_CHAN_DIFF(0, 1, 0x50),
|
|
AT91_SAMA5D2_CHAN_DIFF(2, 3, 0x58),
|
|
AT91_SAMA5D2_CHAN_DIFF(4, 5, 0x60),
|
|
AT91_SAMA5D2_CHAN_DIFF(6, 7, 0x68),
|
|
AT91_SAMA5D2_CHAN_DIFF(8, 9, 0x70),
|
|
AT91_SAMA5D2_CHAN_DIFF(10, 11, 0x78),
|
|
IIO_CHAN_SOFT_TIMESTAMP(AT91_SAMA5D2_SINGLE_CHAN_CNT
|
|
+ AT91_SAMA5D2_DIFF_CHAN_CNT + 1),
|
|
};
|
|
|
|
static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
|
|
{
|
|
struct iio_dev *indio = iio_trigger_get_drvdata(trig);
|
|
struct at91_adc_state *st = iio_priv(indio);
|
|
u32 status = at91_adc_readl(st, AT91_SAMA5D2_TRGR);
|
|
u8 bit;
|
|
|
|
/* clear TRGMOD */
|
|
status &= ~AT91_SAMA5D2_TRGR_TRGMOD_MASK;
|
|
|
|
if (state)
|
|
status |= st->selected_trig->trgmod_value;
|
|
|
|
/* set/unset hw trigger */
|
|
at91_adc_writel(st, AT91_SAMA5D2_TRGR, status);
|
|
|
|
for_each_set_bit(bit, indio->active_scan_mask, indio->num_channels) {
|
|
struct iio_chan_spec const *chan = indio->channels + bit;
|
|
|
|
if (state) {
|
|
at91_adc_writel(st, AT91_SAMA5D2_CHER,
|
|
BIT(chan->channel));
|
|
at91_adc_writel(st, AT91_SAMA5D2_IER,
|
|
BIT(chan->channel));
|
|
} else {
|
|
at91_adc_writel(st, AT91_SAMA5D2_IDR,
|
|
BIT(chan->channel));
|
|
at91_adc_writel(st, AT91_SAMA5D2_CHDR,
|
|
BIT(chan->channel));
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_adc_reenable_trigger(struct iio_trigger *trig)
|
|
{
|
|
struct iio_dev *indio = iio_trigger_get_drvdata(trig);
|
|
struct at91_adc_state *st = iio_priv(indio);
|
|
|
|
enable_irq(st->irq);
|
|
|
|
/* Needed to ACK the DRDY interruption */
|
|
at91_adc_readl(st, AT91_SAMA5D2_LCDR);
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_trigger_ops at91_adc_trigger_ops = {
|
|
.owner = THIS_MODULE,
|
|
.set_trigger_state = &at91_adc_configure_trigger,
|
|
.try_reenable = &at91_adc_reenable_trigger,
|
|
};
|
|
|
|
static struct iio_trigger *at91_adc_allocate_trigger(struct iio_dev *indio,
|
|
char *trigger_name)
|
|
{
|
|
struct iio_trigger *trig;
|
|
int ret;
|
|
|
|
trig = devm_iio_trigger_alloc(&indio->dev, "%s-dev%d-%s", indio->name,
|
|
indio->id, trigger_name);
|
|
if (!trig)
|
|
return NULL;
|
|
|
|
trig->dev.parent = indio->dev.parent;
|
|
iio_trigger_set_drvdata(trig, indio);
|
|
trig->ops = &at91_adc_trigger_ops;
|
|
|
|
ret = devm_iio_trigger_register(&indio->dev, trig);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
|
|
return trig;
|
|
}
|
|
|
|
static int at91_adc_trigger_init(struct iio_dev *indio)
|
|
{
|
|
struct at91_adc_state *st = iio_priv(indio);
|
|
|
|
st->trig = at91_adc_allocate_trigger(indio, st->selected_trig->name);
|
|
if (IS_ERR(st->trig)) {
|
|
dev_err(&indio->dev,
|
|
"could not allocate trigger\n");
|
|
return PTR_ERR(st->trig);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t at91_adc_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio = pf->indio_dev;
|
|
struct at91_adc_state *st = iio_priv(indio);
|
|
int i = 0;
|
|
u8 bit;
|
|
|
|
for_each_set_bit(bit, indio->active_scan_mask, indio->num_channels) {
|
|
struct iio_chan_spec const *chan = indio->channels + bit;
|
|
|
|
st->buffer[i] = at91_adc_readl(st, chan->address);
|
|
i++;
|
|
}
|
|
|
|
iio_push_to_buffers_with_timestamp(indio, st->buffer, pf->timestamp);
|
|
|
|
iio_trigger_notify_done(indio->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int at91_adc_buffer_init(struct iio_dev *indio)
|
|
{
|
|
return devm_iio_triggered_buffer_setup(&indio->dev, indio,
|
|
&iio_pollfunc_store_time,
|
|
&at91_adc_trigger_handler, NULL);
|
|
}
|
|
|
|
static unsigned at91_adc_startup_time(unsigned startup_time_min,
|
|
unsigned adc_clk_khz)
|
|
{
|
|
static const unsigned int startup_lookup[] = {
|
|
0, 8, 16, 24,
|
|
64, 80, 96, 112,
|
|
512, 576, 640, 704,
|
|
768, 832, 896, 960
|
|
};
|
|
unsigned ticks_min, i;
|
|
|
|
/*
|
|
* Since the adc frequency is checked before, there is no reason
|
|
* to not meet the startup time constraint.
|
|
*/
|
|
|
|
ticks_min = startup_time_min * adc_clk_khz / 1000;
|
|
for (i = 0; i < ARRAY_SIZE(startup_lookup); i++)
|
|
if (startup_lookup[i] > ticks_min)
|
|
break;
|
|
|
|
return i;
|
|
}
|
|
|
|
static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq)
|
|
{
|
|
struct iio_dev *indio_dev = iio_priv_to_dev(st);
|
|
unsigned f_per, prescal, startup, mr;
|
|
|
|
f_per = clk_get_rate(st->per_clk);
|
|
prescal = (f_per / (2 * freq)) - 1;
|
|
|
|
startup = at91_adc_startup_time(st->soc_info.startup_time,
|
|
freq / 1000);
|
|
|
|
mr = at91_adc_readl(st, AT91_SAMA5D2_MR);
|
|
mr &= ~(AT91_SAMA5D2_MR_STARTUP_MASK | AT91_SAMA5D2_MR_PRESCAL_MASK);
|
|
mr |= AT91_SAMA5D2_MR_STARTUP(startup);
|
|
mr |= AT91_SAMA5D2_MR_PRESCAL(prescal);
|
|
at91_adc_writel(st, AT91_SAMA5D2_MR, mr);
|
|
|
|
dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n",
|
|
freq, startup, prescal);
|
|
}
|
|
|
|
static unsigned at91_adc_get_sample_freq(struct at91_adc_state *st)
|
|
{
|
|
unsigned f_adc, f_per = clk_get_rate(st->per_clk);
|
|
unsigned mr, prescal;
|
|
|
|
mr = at91_adc_readl(st, AT91_SAMA5D2_MR);
|
|
prescal = (mr >> AT91_SAMA5D2_MR_PRESCAL_OFFSET)
|
|
& AT91_SAMA5D2_MR_PRESCAL_MAX;
|
|
f_adc = f_per / (2 * (prescal + 1));
|
|
|
|
return f_adc;
|
|
}
|
|
|
|
static irqreturn_t at91_adc_interrupt(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio = private;
|
|
struct at91_adc_state *st = iio_priv(indio);
|
|
u32 status = at91_adc_readl(st, AT91_SAMA5D2_ISR);
|
|
u32 imr = at91_adc_readl(st, AT91_SAMA5D2_IMR);
|
|
|
|
if (!(status & imr))
|
|
return IRQ_NONE;
|
|
|
|
if (iio_buffer_enabled(indio)) {
|
|
disable_irq_nosync(irq);
|
|
iio_trigger_poll(indio->trig);
|
|
} else {
|
|
st->conversion_value = at91_adc_readl(st, st->chan->address);
|
|
st->conversion_done = true;
|
|
wake_up_interruptible(&st->wq_data_available);
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int at91_adc_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct at91_adc_state *st = iio_priv(indio_dev);
|
|
u32 cor = 0;
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
/* we cannot use software trigger if hw trigger enabled */
|
|
ret = iio_device_claim_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&st->lock);
|
|
|
|
st->chan = chan;
|
|
|
|
if (chan->differential)
|
|
cor = (BIT(chan->channel) | BIT(chan->channel2)) <<
|
|
AT91_SAMA5D2_COR_DIFF_OFFSET;
|
|
|
|
at91_adc_writel(st, AT91_SAMA5D2_COR, cor);
|
|
at91_adc_writel(st, AT91_SAMA5D2_CHER, BIT(chan->channel));
|
|
at91_adc_writel(st, AT91_SAMA5D2_IER, BIT(chan->channel));
|
|
at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_START);
|
|
|
|
ret = wait_event_interruptible_timeout(st->wq_data_available,
|
|
st->conversion_done,
|
|
msecs_to_jiffies(1000));
|
|
if (ret == 0)
|
|
ret = -ETIMEDOUT;
|
|
|
|
if (ret > 0) {
|
|
*val = st->conversion_value;
|
|
if (chan->scan_type.sign == 's')
|
|
*val = sign_extend32(*val, 11);
|
|
ret = IIO_VAL_INT;
|
|
st->conversion_done = false;
|
|
}
|
|
|
|
at91_adc_writel(st, AT91_SAMA5D2_IDR, BIT(chan->channel));
|
|
at91_adc_writel(st, AT91_SAMA5D2_CHDR, BIT(chan->channel));
|
|
|
|
mutex_unlock(&st->lock);
|
|
|
|
iio_device_release_direct_mode(indio_dev);
|
|
return ret;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = st->vref_uv / 1000;
|
|
if (chan->differential)
|
|
*val *= 2;
|
|
*val2 = chan->scan_type.realbits;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
*val = at91_adc_get_sample_freq(st);
|
|
return IIO_VAL_INT;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int at91_adc_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct at91_adc_state *st = iio_priv(indio_dev);
|
|
|
|
if (mask != IIO_CHAN_INFO_SAMP_FREQ)
|
|
return -EINVAL;
|
|
|
|
if (val < st->soc_info.min_sample_rate ||
|
|
val > st->soc_info.max_sample_rate)
|
|
return -EINVAL;
|
|
|
|
at91_adc_setup_samp_freq(st, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_info at91_adc_info = {
|
|
.read_raw = &at91_adc_read_raw,
|
|
.write_raw = &at91_adc_write_raw,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
static void at91_adc_hw_init(struct at91_adc_state *st)
|
|
{
|
|
at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST);
|
|
at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff);
|
|
/*
|
|
* Transfer field must be set to 2 according to the datasheet and
|
|
* allows different analog settings for each channel.
|
|
*/
|
|
at91_adc_writel(st, AT91_SAMA5D2_MR,
|
|
AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH);
|
|
|
|
at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate);
|
|
}
|
|
|
|
static int at91_adc_probe(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct at91_adc_state *st;
|
|
struct resource *res;
|
|
int ret, i;
|
|
u32 edge_type;
|
|
|
|
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
indio_dev->dev.parent = &pdev->dev;
|
|
indio_dev->name = dev_name(&pdev->dev);
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &at91_adc_info;
|
|
indio_dev->channels = at91_adc_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(at91_adc_channels);
|
|
|
|
st = iio_priv(indio_dev);
|
|
|
|
ret = of_property_read_u32(pdev->dev.of_node,
|
|
"atmel,min-sample-rate-hz",
|
|
&st->soc_info.min_sample_rate);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"invalid or missing value for atmel,min-sample-rate-hz\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = of_property_read_u32(pdev->dev.of_node,
|
|
"atmel,max-sample-rate-hz",
|
|
&st->soc_info.max_sample_rate);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"invalid or missing value for atmel,max-sample-rate-hz\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = of_property_read_u32(pdev->dev.of_node, "atmel,startup-time-ms",
|
|
&st->soc_info.startup_time);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"invalid or missing value for atmel,startup-time-ms\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = of_property_read_u32(pdev->dev.of_node,
|
|
"atmel,trigger-edge-type", &edge_type);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"invalid or missing value for atmel,trigger-edge-type\n");
|
|
return ret;
|
|
}
|
|
|
|
st->selected_trig = NULL;
|
|
|
|
for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT; i++)
|
|
if (at91_adc_trigger_list[i].edge_type == edge_type) {
|
|
st->selected_trig = &at91_adc_trigger_list[i];
|
|
break;
|
|
}
|
|
|
|
if (!st->selected_trig) {
|
|
dev_err(&pdev->dev, "invalid external trigger edge value\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
init_waitqueue_head(&st->wq_data_available);
|
|
mutex_init(&st->lock);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -EINVAL;
|
|
|
|
st->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(st->base))
|
|
return PTR_ERR(st->base);
|
|
|
|
st->irq = platform_get_irq(pdev, 0);
|
|
if (st->irq <= 0) {
|
|
if (!st->irq)
|
|
st->irq = -ENXIO;
|
|
|
|
return st->irq;
|
|
}
|
|
|
|
st->per_clk = devm_clk_get(&pdev->dev, "adc_clk");
|
|
if (IS_ERR(st->per_clk))
|
|
return PTR_ERR(st->per_clk);
|
|
|
|
st->reg = devm_regulator_get(&pdev->dev, "vddana");
|
|
if (IS_ERR(st->reg))
|
|
return PTR_ERR(st->reg);
|
|
|
|
st->vref = devm_regulator_get(&pdev->dev, "vref");
|
|
if (IS_ERR(st->vref))
|
|
return PTR_ERR(st->vref);
|
|
|
|
ret = devm_request_irq(&pdev->dev, st->irq, at91_adc_interrupt, 0,
|
|
pdev->dev.driver->name, indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regulator_enable(st->reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regulator_enable(st->vref);
|
|
if (ret)
|
|
goto reg_disable;
|
|
|
|
st->vref_uv = regulator_get_voltage(st->vref);
|
|
if (st->vref_uv <= 0) {
|
|
ret = -EINVAL;
|
|
goto vref_disable;
|
|
}
|
|
|
|
at91_adc_hw_init(st);
|
|
|
|
ret = clk_prepare_enable(st->per_clk);
|
|
if (ret)
|
|
goto vref_disable;
|
|
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
|
|
ret = at91_adc_buffer_init(indio_dev);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "couldn't initialize the buffer.\n");
|
|
goto per_clk_disable_unprepare;
|
|
}
|
|
|
|
ret = at91_adc_trigger_init(indio_dev);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "couldn't setup the triggers.\n");
|
|
goto per_clk_disable_unprepare;
|
|
}
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret < 0)
|
|
goto per_clk_disable_unprepare;
|
|
|
|
dev_info(&pdev->dev, "setting up trigger as %s\n",
|
|
st->selected_trig->name);
|
|
|
|
dev_info(&pdev->dev, "version: %x\n",
|
|
readl_relaxed(st->base + AT91_SAMA5D2_VERSION));
|
|
|
|
return 0;
|
|
|
|
per_clk_disable_unprepare:
|
|
clk_disable_unprepare(st->per_clk);
|
|
vref_disable:
|
|
regulator_disable(st->vref);
|
|
reg_disable:
|
|
regulator_disable(st->reg);
|
|
return ret;
|
|
}
|
|
|
|
static int at91_adc_remove(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
|
struct at91_adc_state *st = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
clk_disable_unprepare(st->per_clk);
|
|
|
|
regulator_disable(st->vref);
|
|
regulator_disable(st->reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static __maybe_unused int at91_adc_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev =
|
|
platform_get_drvdata(to_platform_device(dev));
|
|
struct at91_adc_state *st = iio_priv(indio_dev);
|
|
|
|
/*
|
|
* Do a sofware reset of the ADC before we go to suspend.
|
|
* this will ensure that all pins are free from being muxed by the ADC
|
|
* and can be used by for other devices.
|
|
* Otherwise, ADC will hog them and we can't go to suspend mode.
|
|
*/
|
|
at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST);
|
|
|
|
clk_disable_unprepare(st->per_clk);
|
|
regulator_disable(st->vref);
|
|
regulator_disable(st->reg);
|
|
|
|
return pinctrl_pm_select_sleep_state(dev);
|
|
}
|
|
|
|
static __maybe_unused int at91_adc_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev =
|
|
platform_get_drvdata(to_platform_device(dev));
|
|
struct at91_adc_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
ret = pinctrl_pm_select_default_state(dev);
|
|
if (ret)
|
|
goto resume_failed;
|
|
|
|
ret = regulator_enable(st->reg);
|
|
if (ret)
|
|
goto resume_failed;
|
|
|
|
ret = regulator_enable(st->vref);
|
|
if (ret)
|
|
goto reg_disable_resume;
|
|
|
|
ret = clk_prepare_enable(st->per_clk);
|
|
if (ret)
|
|
goto vref_disable_resume;
|
|
|
|
at91_adc_hw_init(st);
|
|
|
|
/* reconfiguring trigger hardware state */
|
|
if (iio_buffer_enabled(indio_dev))
|
|
at91_adc_configure_trigger(st->trig, true);
|
|
|
|
return 0;
|
|
|
|
vref_disable_resume:
|
|
regulator_disable(st->vref);
|
|
reg_disable_resume:
|
|
regulator_disable(st->reg);
|
|
resume_failed:
|
|
dev_err(&indio_dev->dev, "failed to resume\n");
|
|
return ret;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(at91_adc_pm_ops, at91_adc_suspend, at91_adc_resume);
|
|
|
|
static const struct of_device_id at91_adc_dt_match[] = {
|
|
{
|
|
.compatible = "atmel,sama5d2-adc",
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, at91_adc_dt_match);
|
|
|
|
static struct platform_driver at91_adc_driver = {
|
|
.probe = at91_adc_probe,
|
|
.remove = at91_adc_remove,
|
|
.driver = {
|
|
.name = "at91-sama5d2_adc",
|
|
.of_match_table = at91_adc_dt_match,
|
|
.pm = &at91_adc_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(at91_adc_driver)
|
|
|
|
MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@atmel.com>");
|
|
MODULE_DESCRIPTION("Atmel AT91 SAMA5D2 ADC");
|
|
MODULE_LICENSE("GPL v2");
|