linux/drivers/net/dsa/bcm_sf2_regs.h

431 lines
12 KiB
C

/*
* Broadcom Starfighter 2 switch register defines
*
* Copyright (C) 2014, Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __BCM_SF2_REGS_H
#define __BCM_SF2_REGS_H
/* Register set relative to 'REG' */
enum bcm_sf2_reg_offs {
REG_SWITCH_CNTRL = 0,
REG_SWITCH_STATUS,
REG_DIR_DATA_WRITE,
REG_DIR_DATA_READ,
REG_SWITCH_REVISION,
REG_PHY_REVISION,
REG_SPHY_CNTRL,
REG_RGMII_0_CNTRL,
REG_RGMII_1_CNTRL,
REG_RGMII_2_CNTRL,
REG_LED_0_CNTRL,
REG_LED_1_CNTRL,
REG_LED_2_CNTRL,
REG_SWITCH_REG_MAX,
};
/* Relative to REG_SWITCH_CNTRL */
#define MDIO_MASTER_SEL (1 << 0)
/* Relative to REG_SWITCH_REVISION */
#define SF2_REV_MASK 0xffff
#define SWITCH_TOP_REV_SHIFT 16
#define SWITCH_TOP_REV_MASK 0xffff
/* Relative to REG_PHY_REVISION */
#define PHY_REVISION_MASK 0xffff
/* Relative to REG_SPHY_CNTRL */
#define IDDQ_BIAS (1 << 0)
#define EXT_PWR_DOWN (1 << 1)
#define FORCE_DLL_EN (1 << 2)
#define IDDQ_GLOBAL_PWR (1 << 3)
#define CK25_DIS (1 << 4)
#define PHY_RESET (1 << 5)
#define PHY_PHYAD_SHIFT 8
#define PHY_PHYAD_MASK 0x1F
#define REG_RGMII_CNTRL_P(x) (REG_RGMII_0_CNTRL + (x))
/* Relative to REG_RGMII_CNTRL */
#define RGMII_MODE_EN (1 << 0)
#define ID_MODE_DIS (1 << 1)
#define PORT_MODE_SHIFT 2
#define INT_EPHY (0 << PORT_MODE_SHIFT)
#define INT_GPHY (1 << PORT_MODE_SHIFT)
#define EXT_EPHY (2 << PORT_MODE_SHIFT)
#define EXT_GPHY (3 << PORT_MODE_SHIFT)
#define EXT_REVMII (4 << PORT_MODE_SHIFT)
#define PORT_MODE_MASK 0x7
#define RVMII_REF_SEL (1 << 5)
#define RX_PAUSE_EN (1 << 6)
#define TX_PAUSE_EN (1 << 7)
#define TX_CLK_STOP_EN (1 << 8)
#define LPI_COUNT_SHIFT 9
#define LPI_COUNT_MASK 0x3F
#define REG_LED_CNTRL(x) (REG_LED_0_CNTRL + (x))
#define SPDLNK_SRC_SEL (1 << 24)
/* Register set relative to 'INTRL2_0' and 'INTRL2_1' */
#define INTRL2_CPU_STATUS 0x00
#define INTRL2_CPU_SET 0x04
#define INTRL2_CPU_CLEAR 0x08
#define INTRL2_CPU_MASK_STATUS 0x0c
#define INTRL2_CPU_MASK_SET 0x10
#define INTRL2_CPU_MASK_CLEAR 0x14
/* Shared INTRL2_0 and INTRL2_ interrupt sources macros */
#define P_LINK_UP_IRQ(x) (1 << (0 + (x)))
#define P_LINK_DOWN_IRQ(x) (1 << (1 + (x)))
#define P_ENERGY_ON_IRQ(x) (1 << (2 + (x)))
#define P_ENERGY_OFF_IRQ(x) (1 << (3 + (x)))
#define P_GPHY_IRQ(x) (1 << (4 + (x)))
#define P_NUM_IRQ 5
#define P_IRQ_MASK(x) (P_LINK_UP_IRQ((x)) | \
P_LINK_DOWN_IRQ((x)) | \
P_ENERGY_ON_IRQ((x)) | \
P_ENERGY_OFF_IRQ((x)) | \
P_GPHY_IRQ((x)))
/* INTRL2_0 interrupt sources */
#define P0_IRQ_OFF 0
#define MEM_DOUBLE_IRQ (1 << 5)
#define EEE_LPI_IRQ (1 << 6)
#define P5_CPU_WAKE_IRQ (1 << 7)
#define P8_CPU_WAKE_IRQ (1 << 8)
#define P7_CPU_WAKE_IRQ (1 << 9)
#define IEEE1588_IRQ (1 << 10)
#define MDIO_ERR_IRQ (1 << 11)
#define MDIO_DONE_IRQ (1 << 12)
#define GISB_ERR_IRQ (1 << 13)
#define UBUS_ERR_IRQ (1 << 14)
#define FAILOVER_ON_IRQ (1 << 15)
#define FAILOVER_OFF_IRQ (1 << 16)
#define TCAM_SOFT_ERR_IRQ (1 << 17)
/* INTRL2_1 interrupt sources */
#define P7_IRQ_OFF 0
#define P_IRQ_OFF(x) ((6 - (x)) * P_NUM_IRQ)
/* Register set relative to 'ACB' */
#define ACB_CONTROL 0x00
#define ACB_EN (1 << 0)
#define ACB_ALGORITHM (1 << 1)
#define ACB_FLUSH_SHIFT 2
#define ACB_FLUSH_MASK 0x3
#define ACB_QUEUE_0_CFG 0x08
#define XOFF_THRESHOLD_MASK 0x7ff
#define XON_EN (1 << 11)
#define TOTAL_XOFF_THRESHOLD_SHIFT 12
#define TOTAL_XOFF_THRESHOLD_MASK 0x7ff
#define TOTAL_XOFF_EN (1 << 23)
#define TOTAL_XON_EN (1 << 24)
#define PKTLEN_SHIFT 25
#define PKTLEN_MASK 0x3f
#define ACB_QUEUE_CFG(x) (ACB_QUEUE_0_CFG + ((x) * 0x4))
/* Register set relative to 'CORE' */
#define CORE_G_PCTL_PORT0 0x00000
#define CORE_G_PCTL_PORT(x) (CORE_G_PCTL_PORT0 + (x * 0x4))
#define CORE_IMP_CTL 0x00020
#define RX_DIS (1 << 0)
#define TX_DIS (1 << 1)
#define RX_BCST_EN (1 << 2)
#define RX_MCST_EN (1 << 3)
#define RX_UCST_EN (1 << 4)
#define CORE_SWMODE 0x0002c
#define SW_FWDG_MODE (1 << 0)
#define SW_FWDG_EN (1 << 1)
#define RTRY_LMT_DIS (1 << 2)
#define CORE_STS_OVERRIDE_IMP 0x00038
#define GMII_SPEED_UP_2G (1 << 6)
#define MII_SW_OR (1 << 7)
/* Alternate layout for e.g: 7278 */
#define CORE_STS_OVERRIDE_IMP2 0x39040
#define CORE_NEW_CTRL 0x00084
#define IP_MC (1 << 0)
#define OUTRANGEERR_DISCARD (1 << 1)
#define INRANGEERR_DISCARD (1 << 2)
#define CABLE_DIAG_LEN (1 << 3)
#define OVERRIDE_AUTO_PD_WAR (1 << 4)
#define EN_AUTO_PD_WAR (1 << 5)
#define UC_FWD_EN (1 << 6)
#define MC_FWD_EN (1 << 7)
#define CORE_SWITCH_CTRL 0x00088
#define MII_DUMB_FWDG_EN (1 << 6)
#define CORE_SFT_LRN_CTRL 0x000f8
#define SW_LEARN_CNTL(x) (1 << (x))
#define CORE_STS_OVERRIDE_GMIIP_PORT(x) (0x160 + (x) * 4)
#define CORE_STS_OVERRIDE_GMIIP2_PORT(x) (0x39000 + (x) * 8)
#define LINK_STS (1 << 0)
#define DUPLX_MODE (1 << 1)
#define SPEED_SHIFT 2
#define SPEED_MASK 0x3
#define RXFLOW_CNTL (1 << 4)
#define TXFLOW_CNTL (1 << 5)
#define SW_OVERRIDE (1 << 6)
#define CORE_WATCHDOG_CTRL 0x001e4
#define SOFTWARE_RESET (1 << 7)
#define EN_CHIP_RST (1 << 6)
#define EN_SW_RESET (1 << 4)
#define CORE_FAST_AGE_CTRL 0x00220
#define EN_FAST_AGE_STATIC (1 << 0)
#define EN_AGE_DYNAMIC (1 << 1)
#define EN_AGE_PORT (1 << 2)
#define EN_AGE_VLAN (1 << 3)
#define EN_AGE_SPT (1 << 4)
#define EN_AGE_MCAST (1 << 5)
#define FAST_AGE_STR_DONE (1 << 7)
#define CORE_FAST_AGE_PORT 0x00224
#define AGE_PORT_MASK 0xf
#define CORE_FAST_AGE_VID 0x00228
#define AGE_VID_MASK 0x3fff
#define CORE_LNKSTS 0x00400
#define LNK_STS_MASK 0x1ff
#define CORE_SPDSTS 0x00410
#define SPDSTS_10 0
#define SPDSTS_100 1
#define SPDSTS_1000 2
#define SPDSTS_SHIFT 2
#define SPDSTS_MASK 0x3
#define CORE_DUPSTS 0x00420
#define CORE_DUPSTS_MASK 0x1ff
#define CORE_PAUSESTS 0x00428
#define PAUSESTS_TX_PAUSE_SHIFT 9
#define CORE_GMNCFGCFG 0x0800
#define RST_MIB_CNT (1 << 0)
#define RXBPDU_EN (1 << 1)
#define CORE_IMP0_PRT_ID 0x0804
#define CORE_RST_MIB_CNT_EN 0x0950
#define CORE_ARLA_VTBL_RWCTRL 0x1600
#define ARLA_VTBL_CMD_WRITE 0
#define ARLA_VTBL_CMD_READ 1
#define ARLA_VTBL_CMD_CLEAR 2
#define ARLA_VTBL_STDN (1 << 7)
#define CORE_ARLA_VTBL_ADDR 0x1604
#define VTBL_ADDR_INDEX_MASK 0xfff
#define CORE_ARLA_VTBL_ENTRY 0x160c
#define FWD_MAP_MASK 0x1ff
#define UNTAG_MAP_MASK 0x1ff
#define UNTAG_MAP_SHIFT 9
#define MSTP_INDEX_MASK 0x7
#define MSTP_INDEX_SHIFT 18
#define FWD_MODE (1 << 21)
#define CORE_MEM_PSM_VDD_CTRL 0x2380
#define P_TXQ_PSM_VDD_SHIFT 2
#define P_TXQ_PSM_VDD_MASK 0x3
#define P_TXQ_PSM_VDD(x) (P_TXQ_PSM_VDD_MASK << \
((x) * P_TXQ_PSM_VDD_SHIFT))
#define CORE_PORT_TC2_QOS_MAP_PORT(x) (0xc1c0 + ((x) * 0x10))
#define PRT_TO_QID_MASK 0x3
#define PRT_TO_QID_SHIFT 3
#define CORE_PORT_VLAN_CTL_PORT(x) (0xc400 + ((x) * 0x8))
#define PORT_VLAN_CTRL_MASK 0x1ff
#define CORE_TXQ_THD_PAUSE_QN_PORT_0 0x2c80
#define TXQ_PAUSE_THD_MASK 0x7ff
#define CORE_TXQ_THD_PAUSE_QN_PORT(x) (CORE_TXQ_THD_PAUSE_QN_PORT_0 + \
(x) * 0x8)
#define CORE_DEFAULT_1Q_TAG_P(x) (0xd040 + ((x) * 8))
#define CFI_SHIFT 12
#define PRI_SHIFT 13
#define PRI_MASK 0x7
#define CORE_JOIN_ALL_VLAN_EN 0xd140
#define CORE_CFP_ACC 0x28000
#define OP_STR_DONE (1 << 0)
#define OP_SEL_SHIFT 1
#define OP_SEL_READ (1 << OP_SEL_SHIFT)
#define OP_SEL_WRITE (2 << OP_SEL_SHIFT)
#define OP_SEL_SEARCH (4 << OP_SEL_SHIFT)
#define OP_SEL_MASK (7 << OP_SEL_SHIFT)
#define CFP_RAM_CLEAR (1 << 4)
#define RAM_SEL_SHIFT 10
#define TCAM_SEL (1 << RAM_SEL_SHIFT)
#define ACT_POL_RAM (2 << RAM_SEL_SHIFT)
#define RATE_METER_RAM (4 << RAM_SEL_SHIFT)
#define GREEN_STAT_RAM (8 << RAM_SEL_SHIFT)
#define YELLOW_STAT_RAM (16 << RAM_SEL_SHIFT)
#define RED_STAT_RAM (24 << RAM_SEL_SHIFT)
#define RAM_SEL_MASK (0x1f << RAM_SEL_SHIFT)
#define TCAM_RESET (1 << 15)
#define XCESS_ADDR_SHIFT 16
#define XCESS_ADDR_MASK 0xff
#define SEARCH_STS (1 << 27)
#define RD_STS_SHIFT 28
#define RD_STS_TCAM (1 << RD_STS_SHIFT)
#define RD_STS_ACT_POL_RAM (2 << RD_STS_SHIFT)
#define RD_STS_RATE_METER_RAM (4 << RD_STS_SHIFT)
#define RD_STS_STAT_RAM (8 << RD_STS_SHIFT)
#define CORE_CFP_RATE_METER_GLOBAL_CTL 0x28010
#define CORE_CFP_DATA_PORT_0 0x28040
#define CORE_CFP_DATA_PORT(x) (CORE_CFP_DATA_PORT_0 + \
(x) * 0x10)
/* UDF_DATA7 */
#define L3_FRAMING_SHIFT 24
#define L3_FRAMING_MASK (0x3 << L3_FRAMING_SHIFT)
#define IPTOS_SHIFT 16
#define IPTOS_MASK 0xff
#define IPPROTO_SHIFT 8
#define IPPROTO_MASK (0xff << IPPROTO_SHIFT)
#define IP_FRAG_SHIFT 7
#define IP_FRAG (1 << IP_FRAG_SHIFT)
/* UDF_DATA0 */
#define SLICE_VALID 3
#define SLICE_NUM_SHIFT 2
#define SLICE_NUM(x) ((x) << SLICE_NUM_SHIFT)
#define SLICE_NUM_MASK 0x3
#define CORE_CFP_MASK_PORT_0 0x280c0
#define CORE_CFP_MASK_PORT(x) (CORE_CFP_MASK_PORT_0 + \
(x) * 0x10)
#define CORE_ACT_POL_DATA0 0x28140
#define VLAN_BYP (1 << 0)
#define EAP_BYP (1 << 1)
#define STP_BYP (1 << 2)
#define REASON_CODE_SHIFT 3
#define REASON_CODE_MASK 0x3f
#define LOOP_BK_EN (1 << 9)
#define NEW_TC_SHIFT 10
#define NEW_TC_MASK 0x7
#define CHANGE_TC (1 << 13)
#define DST_MAP_IB_SHIFT 14
#define DST_MAP_IB_MASK 0x1ff
#define CHANGE_FWRD_MAP_IB_SHIFT 24
#define CHANGE_FWRD_MAP_IB_MASK 0x3
#define CHANGE_FWRD_MAP_IB_NO_DEST (0 << CHANGE_FWRD_MAP_IB_SHIFT)
#define CHANGE_FWRD_MAP_IB_REM_ARL (1 << CHANGE_FWRD_MAP_IB_SHIFT)
#define CHANGE_FWRD_MAP_IB_REP_ARL (2 << CHANGE_FWRD_MAP_IB_SHIFT)
#define CHANGE_FWRD_MAP_IB_ADD_DST (3 << CHANGE_FWRD_MAP_IB_SHIFT)
#define NEW_DSCP_IB_SHIFT 26
#define NEW_DSCP_IB_MASK 0x3f
#define CORE_ACT_POL_DATA1 0x28150
#define CHANGE_DSCP_IB (1 << 0)
#define DST_MAP_OB_SHIFT 1
#define DST_MAP_OB_MASK 0x3ff
#define CHANGE_FWRD_MAP_OB_SHIT 11
#define CHANGE_FWRD_MAP_OB_MASK 0x3
#define NEW_DSCP_OB_SHIFT 13
#define NEW_DSCP_OB_MASK 0x3f
#define CHANGE_DSCP_OB (1 << 19)
#define CHAIN_ID_SHIFT 20
#define CHAIN_ID_MASK 0xff
#define CHANGE_COLOR (1 << 28)
#define NEW_COLOR_SHIFT 29
#define NEW_COLOR_MASK 0x3
#define NEW_COLOR_GREEN (0 << NEW_COLOR_SHIFT)
#define NEW_COLOR_YELLOW (1 << NEW_COLOR_SHIFT)
#define NEW_COLOR_RED (2 << NEW_COLOR_SHIFT)
#define RED_DEFAULT (1 << 31)
#define CORE_ACT_POL_DATA2 0x28160
#define MAC_LIMIT_BYPASS (1 << 0)
#define CHANGE_TC_O (1 << 1)
#define NEW_TC_O_SHIFT 2
#define NEW_TC_O_MASK 0x7
#define SPCP_RMK_DISABLE (1 << 5)
#define CPCP_RMK_DISABLE (1 << 6)
#define DEI_RMK_DISABLE (1 << 7)
#define CORE_RATE_METER0 0x28180
#define COLOR_MODE (1 << 0)
#define POLICER_ACTION (1 << 1)
#define COUPLING_FLAG (1 << 2)
#define POLICER_MODE_SHIFT 3
#define POLICER_MODE_MASK 0x3
#define POLICER_MODE_RFC2698 (0 << POLICER_MODE_SHIFT)
#define POLICER_MODE_RFC4115 (1 << POLICER_MODE_SHIFT)
#define POLICER_MODE_MEF (2 << POLICER_MODE_SHIFT)
#define POLICER_MODE_DISABLE (3 << POLICER_MODE_SHIFT)
#define CORE_RATE_METER1 0x28190
#define EIR_TK_BKT_MASK 0x7fffff
#define CORE_RATE_METER2 0x281a0
#define EIR_BKT_SIZE_MASK 0xfffff
#define CORE_RATE_METER3 0x281b0
#define EIR_REF_CNT_MASK 0x7ffff
#define CORE_RATE_METER4 0x281c0
#define CIR_TK_BKT_MASK 0x7fffff
#define CORE_RATE_METER5 0x281d0
#define CIR_BKT_SIZE_MASK 0xfffff
#define CORE_RATE_METER6 0x281e0
#define CIR_REF_CNT_MASK 0x7ffff
#define CORE_CFP_CTL_REG 0x28400
#define CFP_EN_MAP_MASK 0x1ff
/* IPv4 slices, 3 of them */
#define CORE_UDF_0_A_0_8_PORT_0 0x28440
#define CFG_UDF_OFFSET_MASK 0x1f
#define CFG_UDF_OFFSET_BASE_SHIFT 5
#define CFG_UDF_SOF (0 << CFG_UDF_OFFSET_BASE_SHIFT)
#define CFG_UDF_EOL2 (2 << CFG_UDF_OFFSET_BASE_SHIFT)
#define CFG_UDF_EOL3 (3 << CFG_UDF_OFFSET_BASE_SHIFT)
/* IPv6 slices */
#define CORE_UDF_0_B_0_8_PORT_0 0x28500
/* IPv6 chained slices */
#define CORE_UDF_0_D_0_11_PORT_0 0x28680
/* Number of slices for IPv4, IPv6 and non-IP */
#define UDF_NUM_SLICES 4
#define UDFS_PER_SLICE 9
/* Spacing between different slices */
#define UDF_SLICE_OFFSET 0x40
#define CFP_NUM_RULES 256
/* Number of egress queues per port */
#define SF2_NUM_EGRESS_QUEUES 8
#endif /* __BCM_SF2_REGS_H */