mirror of https://gitee.com/openkylin/linux.git
433 lines
12 KiB
C
433 lines
12 KiB
C
/*
|
|
* This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
|
|
*
|
|
* flexcop-pci.c - covers the PCI part including DMA transfers.
|
|
*
|
|
* see flexcop.c for copyright information.
|
|
*/
|
|
|
|
#define FC_LOG_PREFIX "flexcop-pci"
|
|
#include "flexcop-common.h"
|
|
|
|
static int enable_pid_filtering = 1;
|
|
module_param(enable_pid_filtering, int, 0444);
|
|
MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1");
|
|
|
|
static int irq_chk_intv;
|
|
module_param(irq_chk_intv, int, 0644);
|
|
MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently just debugging).");
|
|
|
|
#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
|
|
#define dprintk(level,args...) \
|
|
do { if ((debug & level)) printk(args); } while (0)
|
|
#define DEBSTATUS ""
|
|
#else
|
|
#define dprintk(level,args...)
|
|
#define DEBSTATUS " (debugging is not enabled)"
|
|
#endif
|
|
|
|
#define deb_info(args...) dprintk(0x01,args)
|
|
#define deb_reg(args...) dprintk(0x02,args)
|
|
#define deb_ts(args...) dprintk(0x04,args)
|
|
#define deb_irq(args...) dprintk(0x08,args)
|
|
#define deb_chk(args...) dprintk(0x10,args)
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS);
|
|
|
|
#define DRIVER_VERSION "0.1"
|
|
#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver"
|
|
#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>"
|
|
|
|
struct flexcop_pci {
|
|
struct pci_dev *pdev;
|
|
|
|
#define FC_PCI_INIT 0x01
|
|
#define FC_PCI_DMA_INIT 0x02
|
|
int init_state;
|
|
|
|
void __iomem *io_mem;
|
|
u32 irq;
|
|
/* buffersize (at least for DMA1, need to be % 188 == 0,
|
|
* this logic is required */
|
|
#define FC_DEFAULT_DMA1_BUFSIZE (1280 * 188)
|
|
#define FC_DEFAULT_DMA2_BUFSIZE (10 * 188)
|
|
struct flexcop_dma dma[2];
|
|
|
|
int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
|
|
u32 last_dma1_cur_pos; /* position of the pointer last time the timer/packet irq occured */
|
|
int count;
|
|
|
|
spinlock_t irq_lock;
|
|
|
|
unsigned long last_irq;
|
|
|
|
struct delayed_work irq_check_work;
|
|
|
|
struct flexcop_device *fc_dev;
|
|
};
|
|
|
|
static int lastwreg,lastwval,lastrreg,lastrval;
|
|
|
|
static flexcop_ibi_value flexcop_pci_read_ibi_reg (struct flexcop_device *fc, flexcop_ibi_register r)
|
|
{
|
|
struct flexcop_pci *fc_pci = fc->bus_specific;
|
|
flexcop_ibi_value v;
|
|
v.raw = readl(fc_pci->io_mem + r);
|
|
|
|
if (lastrreg != r || lastrval != v.raw) {
|
|
lastrreg = r; lastrval = v.raw;
|
|
deb_reg("new rd: %3x: %08x\n",r,v.raw);
|
|
}
|
|
|
|
return v;
|
|
}
|
|
|
|
static int flexcop_pci_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register r, flexcop_ibi_value v)
|
|
{
|
|
struct flexcop_pci *fc_pci = fc->bus_specific;
|
|
|
|
if (lastwreg != r || lastwval != v.raw) {
|
|
lastwreg = r; lastwval = v.raw;
|
|
deb_reg("new wr: %3x: %08x\n",r,v.raw);
|
|
}
|
|
|
|
writel(v.raw, fc_pci->io_mem + r);
|
|
return 0;
|
|
}
|
|
|
|
static void flexcop_pci_irq_check_work(struct work_struct *work)
|
|
{
|
|
struct flexcop_pci *fc_pci =
|
|
container_of(work, struct flexcop_pci, irq_check_work.work);
|
|
struct flexcop_device *fc = fc_pci->fc_dev;
|
|
|
|
flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714);
|
|
|
|
flexcop_dump_reg(fc_pci->fc_dev,dma1_000,4);
|
|
|
|
if (v.sram_dest_reg_714.net_ovflow_error)
|
|
deb_chk("sram net_ovflow_error\n");
|
|
if (v.sram_dest_reg_714.media_ovflow_error)
|
|
deb_chk("sram media_ovflow_error\n");
|
|
if (v.sram_dest_reg_714.cai_ovflow_error)
|
|
deb_chk("sram cai_ovflow_error\n");
|
|
if (v.sram_dest_reg_714.cai_ovflow_error)
|
|
deb_chk("sram cai_ovflow_error\n");
|
|
|
|
schedule_delayed_work(&fc_pci->irq_check_work,
|
|
msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
|
|
}
|
|
|
|
/* When PID filtering is turned on, we use the timer IRQ, because small amounts
|
|
* of data need to be passed to the user space instantly as well. When PID
|
|
* filtering is turned off, we use the page-change-IRQ */
|
|
static irqreturn_t flexcop_pci_isr(int irq, void *dev_id)
|
|
{
|
|
struct flexcop_pci *fc_pci = dev_id;
|
|
struct flexcop_device *fc = fc_pci->fc_dev;
|
|
unsigned long flags;
|
|
flexcop_ibi_value v;
|
|
irqreturn_t ret = IRQ_HANDLED;
|
|
|
|
spin_lock_irqsave(&fc_pci->irq_lock,flags);
|
|
|
|
v = fc->read_ibi_reg(fc,irq_20c);
|
|
|
|
/* errors */
|
|
if (v.irq_20c.Data_receiver_error)
|
|
deb_chk("data receiver error\n");
|
|
if (v.irq_20c.Continuity_error_flag)
|
|
deb_chk("Contunuity error flag is set\n");
|
|
if (v.irq_20c.LLC_SNAP_FLAG_set)
|
|
deb_chk("LLC_SNAP_FLAG_set is set\n");
|
|
if (v.irq_20c.Transport_Error)
|
|
deb_chk("Transport error\n");
|
|
|
|
if ((fc_pci->count % 1000) == 0)
|
|
deb_chk("%d valid irq took place so far\n",fc_pci->count);
|
|
|
|
if (v.irq_20c.DMA1_IRQ_Status == 1) {
|
|
if (fc_pci->active_dma1_addr == 0)
|
|
flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr0,fc_pci->dma[0].size / 188);
|
|
else
|
|
flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr1,fc_pci->dma[0].size / 188);
|
|
|
|
deb_irq("page change to page: %d\n",!fc_pci->active_dma1_addr);
|
|
fc_pci->active_dma1_addr = !fc_pci->active_dma1_addr;
|
|
} else if (v.irq_20c.DMA1_Timer_Status == 1) {
|
|
/* for the timer IRQ we only can use buffer dmx feeding, because we don't have
|
|
* complete TS packets when reading from the DMA memory */
|
|
dma_addr_t cur_addr =
|
|
fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
|
|
u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
|
|
|
|
deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, last_cur_pos: %08x ",
|
|
jiffies_to_usecs(jiffies - fc_pci->last_irq),
|
|
v.raw, (unsigned long long)cur_addr, cur_pos,
|
|
fc_pci->last_dma1_cur_pos);
|
|
fc_pci->last_irq = jiffies;
|
|
|
|
/* buffer end was reached, restarted from the beginning
|
|
* pass the data from last_cur_pos to the buffer end to the demux
|
|
*/
|
|
if (cur_pos < fc_pci->last_dma1_cur_pos) {
|
|
deb_irq(" end was reached: passing %d bytes ",(fc_pci->dma[0].size*2 - 1) - fc_pci->last_dma1_cur_pos);
|
|
flexcop_pass_dmx_data(fc_pci->fc_dev,
|
|
fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos,
|
|
(fc_pci->dma[0].size*2) - fc_pci->last_dma1_cur_pos);
|
|
fc_pci->last_dma1_cur_pos = 0;
|
|
}
|
|
|
|
if (cur_pos > fc_pci->last_dma1_cur_pos) {
|
|
deb_irq(" passing %d bytes ",cur_pos - fc_pci->last_dma1_cur_pos);
|
|
flexcop_pass_dmx_data(fc_pci->fc_dev,
|
|
fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos,
|
|
cur_pos - fc_pci->last_dma1_cur_pos);
|
|
}
|
|
deb_irq("\n");
|
|
|
|
fc_pci->last_dma1_cur_pos = cur_pos;
|
|
fc_pci->count++;
|
|
} else {
|
|
deb_irq("isr for flexcop called, apparently without reason (%08x)\n",v.raw);
|
|
ret = IRQ_NONE;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&fc_pci->irq_lock,flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int flexcop_pci_stream_control(struct flexcop_device *fc, int onoff)
|
|
{
|
|
struct flexcop_pci *fc_pci = fc->bus_specific;
|
|
if (onoff) {
|
|
flexcop_dma_config(fc,&fc_pci->dma[0],FC_DMA_1);
|
|
flexcop_dma_config(fc,&fc_pci->dma[1],FC_DMA_2);
|
|
|
|
flexcop_dma_config_timer(fc,FC_DMA_1,0);
|
|
|
|
flexcop_dma_xfer_control(fc,FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1,1);
|
|
deb_irq("DMA xfer enabled\n");
|
|
|
|
fc_pci->last_dma1_cur_pos = 0;
|
|
flexcop_dma_control_timer_irq(fc,FC_DMA_1,1);
|
|
deb_irq("IRQ enabled\n");
|
|
|
|
// fc_pci->active_dma1_addr = 0;
|
|
// flexcop_dma_control_size_irq(fc,FC_DMA_1,1);
|
|
|
|
if (irq_chk_intv > 0)
|
|
schedule_delayed_work(&fc_pci->irq_check_work,
|
|
msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
|
|
} else {
|
|
if (irq_chk_intv > 0)
|
|
cancel_delayed_work(&fc_pci->irq_check_work);
|
|
|
|
flexcop_dma_control_timer_irq(fc,FC_DMA_1,0);
|
|
deb_irq("IRQ disabled\n");
|
|
|
|
// flexcop_dma_control_size_irq(fc,FC_DMA_1,0);
|
|
|
|
flexcop_dma_xfer_control(fc,FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1,0);
|
|
deb_irq("DMA xfer disabled\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int flexcop_pci_dma_init(struct flexcop_pci *fc_pci)
|
|
{
|
|
int ret;
|
|
if ((ret = flexcop_dma_allocate(fc_pci->pdev,&fc_pci->dma[0],FC_DEFAULT_DMA1_BUFSIZE)) != 0)
|
|
return ret;
|
|
|
|
if ((ret = flexcop_dma_allocate(fc_pci->pdev,&fc_pci->dma[1],FC_DEFAULT_DMA2_BUFSIZE)) != 0) {
|
|
flexcop_dma_free(&fc_pci->dma[0]);
|
|
return ret;
|
|
}
|
|
|
|
flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_MEDIA | FC_SRAM_DEST_NET, FC_SRAM_DEST_TARGET_DMA1);
|
|
flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_DMA2);
|
|
|
|
fc_pci->init_state |= FC_PCI_DMA_INIT;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void flexcop_pci_dma_exit(struct flexcop_pci *fc_pci)
|
|
{
|
|
if (fc_pci->init_state & FC_PCI_DMA_INIT) {
|
|
flexcop_dma_free(&fc_pci->dma[0]);
|
|
flexcop_dma_free(&fc_pci->dma[1]);
|
|
}
|
|
fc_pci->init_state &= ~FC_PCI_DMA_INIT;
|
|
}
|
|
|
|
static int flexcop_pci_init(struct flexcop_pci *fc_pci)
|
|
{
|
|
int ret;
|
|
u8 card_rev;
|
|
|
|
pci_read_config_byte(fc_pci->pdev, PCI_CLASS_REVISION, &card_rev);
|
|
info("card revision %x", card_rev);
|
|
|
|
if ((ret = pci_enable_device(fc_pci->pdev)) != 0)
|
|
return ret;
|
|
|
|
pci_set_master(fc_pci->pdev);
|
|
|
|
/* enable interrupts */
|
|
// pci_write_config_dword(pdev, 0x6c, 0x8000);
|
|
|
|
if ((ret = pci_request_regions(fc_pci->pdev, DRIVER_NAME)) != 0)
|
|
goto err_pci_disable_device;
|
|
|
|
fc_pci->io_mem = pci_iomap(fc_pci->pdev, 0, 0x800);
|
|
|
|
if (!fc_pci->io_mem) {
|
|
err("cannot map io memory\n");
|
|
ret = -EIO;
|
|
goto err_pci_release_regions;
|
|
}
|
|
|
|
pci_set_drvdata(fc_pci->pdev, fc_pci);
|
|
spin_lock_init(&fc_pci->irq_lock);
|
|
if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_isr,
|
|
IRQF_SHARED, DRIVER_NAME, fc_pci)) != 0)
|
|
goto err_pci_iounmap;
|
|
|
|
|
|
|
|
fc_pci->init_state |= FC_PCI_INIT;
|
|
return ret;
|
|
|
|
err_pci_iounmap:
|
|
pci_iounmap(fc_pci->pdev, fc_pci->io_mem);
|
|
pci_set_drvdata(fc_pci->pdev, NULL);
|
|
err_pci_release_regions:
|
|
pci_release_regions(fc_pci->pdev);
|
|
err_pci_disable_device:
|
|
pci_disable_device(fc_pci->pdev);
|
|
return ret;
|
|
}
|
|
|
|
static void flexcop_pci_exit(struct flexcop_pci *fc_pci)
|
|
{
|
|
if (fc_pci->init_state & FC_PCI_INIT) {
|
|
free_irq(fc_pci->pdev->irq, fc_pci);
|
|
pci_iounmap(fc_pci->pdev, fc_pci->io_mem);
|
|
pci_set_drvdata(fc_pci->pdev, NULL);
|
|
pci_release_regions(fc_pci->pdev);
|
|
pci_disable_device(fc_pci->pdev);
|
|
}
|
|
fc_pci->init_state &= ~FC_PCI_INIT;
|
|
}
|
|
|
|
|
|
static int flexcop_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
struct flexcop_device *fc;
|
|
struct flexcop_pci *fc_pci;
|
|
int ret = -ENOMEM;
|
|
|
|
if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_pci))) == NULL) {
|
|
err("out of memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* general flexcop init */
|
|
fc_pci = fc->bus_specific;
|
|
fc_pci->fc_dev = fc;
|
|
|
|
fc->read_ibi_reg = flexcop_pci_read_ibi_reg;
|
|
fc->write_ibi_reg = flexcop_pci_write_ibi_reg;
|
|
fc->i2c_request = flexcop_i2c_request;
|
|
fc->get_mac_addr = flexcop_eeprom_check_mac_addr;
|
|
|
|
fc->stream_control = flexcop_pci_stream_control;
|
|
|
|
if (enable_pid_filtering)
|
|
info("will use the HW PID filter.");
|
|
else
|
|
info("will pass the complete TS to the demuxer.");
|
|
|
|
fc->pid_filtering = enable_pid_filtering;
|
|
fc->bus_type = FC_PCI;
|
|
|
|
fc->dev = &pdev->dev;
|
|
fc->owner = THIS_MODULE;
|
|
|
|
/* bus specific part */
|
|
fc_pci->pdev = pdev;
|
|
if ((ret = flexcop_pci_init(fc_pci)) != 0)
|
|
goto err_kfree;
|
|
|
|
/* init flexcop */
|
|
if ((ret = flexcop_device_initialize(fc)) != 0)
|
|
goto err_pci_exit;
|
|
|
|
/* init dma */
|
|
if ((ret = flexcop_pci_dma_init(fc_pci)) != 0)
|
|
goto err_fc_exit;
|
|
|
|
INIT_DELAYED_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work);
|
|
|
|
return ret;
|
|
|
|
err_fc_exit:
|
|
flexcop_device_exit(fc);
|
|
err_pci_exit:
|
|
flexcop_pci_exit(fc_pci);
|
|
err_kfree:
|
|
flexcop_device_kfree(fc);
|
|
return ret;
|
|
}
|
|
|
|
/* in theory every _exit function should be called exactly two times,
|
|
* here and in the bail-out-part of the _init-function
|
|
*/
|
|
static void flexcop_pci_remove(struct pci_dev *pdev)
|
|
{
|
|
struct flexcop_pci *fc_pci = pci_get_drvdata(pdev);
|
|
|
|
flexcop_pci_dma_exit(fc_pci);
|
|
flexcop_device_exit(fc_pci->fc_dev);
|
|
flexcop_pci_exit(fc_pci);
|
|
flexcop_device_kfree(fc_pci->fc_dev);
|
|
}
|
|
|
|
static struct pci_device_id flexcop_pci_tbl[] = {
|
|
{ PCI_DEVICE(0x13d0, 0x2103) },
|
|
/* { PCI_DEVICE(0x13d0, 0x2200) }, ? */
|
|
{ },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl);
|
|
|
|
static struct pci_driver flexcop_pci_driver = {
|
|
.name = "b2c2_flexcop_pci",
|
|
.id_table = flexcop_pci_tbl,
|
|
.probe = flexcop_pci_probe,
|
|
.remove = flexcop_pci_remove,
|
|
};
|
|
|
|
static int __init flexcop_pci_module_init(void)
|
|
{
|
|
return pci_register_driver(&flexcop_pci_driver);
|
|
}
|
|
|
|
static void __exit flexcop_pci_module_exit(void)
|
|
{
|
|
pci_unregister_driver(&flexcop_pci_driver);
|
|
}
|
|
|
|
module_init(flexcop_pci_module_init);
|
|
module_exit(flexcop_pci_module_exit);
|
|
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
MODULE_DESCRIPTION(DRIVER_NAME);
|
|
MODULE_LICENSE("GPL");
|