mirror of https://gitee.com/openkylin/linux.git
37 lines
1.0 KiB
Plaintext
37 lines
1.0 KiB
Plaintext
Bosch BMI160 - Inertial Measurement Unit with Accelerometer, Gyroscope
|
|
and externally connectable Magnetometer
|
|
|
|
https://www.bosch-sensortec.com/bst/products/all_products/bmi160
|
|
|
|
Required properties:
|
|
- compatible : should be "bosch,bmi160"
|
|
- reg : the I2C address or SPI chip select number of the sensor
|
|
- spi-max-frequency : set maximum clock frequency (only for SPI)
|
|
|
|
Optional properties:
|
|
- interrupt-parent : should be the phandle of the interrupt controller
|
|
- interrupts : interrupt mapping for IRQ, must be IRQ_TYPE_LEVEL_LOW
|
|
- interrupt-names : set to "INT1" if INT1 pin should be used as interrupt
|
|
input, set to "INT2" if INT2 pin should be used instead
|
|
|
|
Examples:
|
|
|
|
bmi160@68 {
|
|
compatible = "bosch,bmi160";
|
|
reg = <0x68>;
|
|
|
|
interrupt-parent = <&gpio4>;
|
|
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-names = "INT1";
|
|
};
|
|
|
|
bmi160@0 {
|
|
compatible = "bosch,bmi160";
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-names = "INT2";
|
|
};
|