mirror of https://gitee.com/openkylin/linux.git
582 lines
14 KiB
C
582 lines
14 KiB
C
/*
|
|
* Driver for the Solomon SSD1307 OLED controller
|
|
*
|
|
* Copyright 2012 Free Electrons
|
|
*
|
|
* Licensed under the GPLv2 or later.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/delay.h>
|
|
|
|
#define SSD1307FB_DATA 0x40
|
|
#define SSD1307FB_COMMAND 0x80
|
|
|
|
#define SSD1307FB_SET_ADDRESS_MODE 0x20
|
|
#define SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL (0x00)
|
|
#define SSD1307FB_SET_ADDRESS_MODE_VERTICAL (0x01)
|
|
#define SSD1307FB_SET_ADDRESS_MODE_PAGE (0x02)
|
|
#define SSD1307FB_SET_COL_RANGE 0x21
|
|
#define SSD1307FB_SET_PAGE_RANGE 0x22
|
|
#define SSD1307FB_CONTRAST 0x81
|
|
#define SSD1307FB_CHARGE_PUMP 0x8d
|
|
#define SSD1307FB_SEG_REMAP_ON 0xa1
|
|
#define SSD1307FB_DISPLAY_OFF 0xae
|
|
#define SSD1307FB_SET_MULTIPLEX_RATIO 0xa8
|
|
#define SSD1307FB_DISPLAY_ON 0xaf
|
|
#define SSD1307FB_START_PAGE_ADDRESS 0xb0
|
|
#define SSD1307FB_SET_DISPLAY_OFFSET 0xd3
|
|
#define SSD1307FB_SET_CLOCK_FREQ 0xd5
|
|
#define SSD1307FB_SET_PRECHARGE_PERIOD 0xd9
|
|
#define SSD1307FB_SET_COM_PINS_CONFIG 0xda
|
|
#define SSD1307FB_SET_VCOMH 0xdb
|
|
|
|
struct ssd1307fb_par;
|
|
|
|
struct ssd1307fb_ops {
|
|
int (*init)(struct ssd1307fb_par *);
|
|
int (*remove)(struct ssd1307fb_par *);
|
|
};
|
|
|
|
struct ssd1307fb_par {
|
|
struct i2c_client *client;
|
|
u32 height;
|
|
struct fb_info *info;
|
|
struct ssd1307fb_ops *ops;
|
|
u32 page_offset;
|
|
struct pwm_device *pwm;
|
|
u32 pwm_period;
|
|
int reset;
|
|
u32 width;
|
|
};
|
|
|
|
struct ssd1307fb_array {
|
|
u8 type;
|
|
u8 data[0];
|
|
};
|
|
|
|
static struct fb_fix_screeninfo ssd1307fb_fix = {
|
|
.id = "Solomon SSD1307",
|
|
.type = FB_TYPE_PACKED_PIXELS,
|
|
.visual = FB_VISUAL_MONO10,
|
|
.xpanstep = 0,
|
|
.ypanstep = 0,
|
|
.ywrapstep = 0,
|
|
.accel = FB_ACCEL_NONE,
|
|
};
|
|
|
|
static struct fb_var_screeninfo ssd1307fb_var = {
|
|
.bits_per_pixel = 1,
|
|
};
|
|
|
|
static struct ssd1307fb_array *ssd1307fb_alloc_array(u32 len, u8 type)
|
|
{
|
|
struct ssd1307fb_array *array;
|
|
|
|
array = kzalloc(sizeof(struct ssd1307fb_array) + len, GFP_KERNEL);
|
|
if (!array)
|
|
return NULL;
|
|
|
|
array->type = type;
|
|
|
|
return array;
|
|
}
|
|
|
|
static int ssd1307fb_write_array(struct i2c_client *client,
|
|
struct ssd1307fb_array *array, u32 len)
|
|
{
|
|
int ret;
|
|
|
|
len += sizeof(struct ssd1307fb_array);
|
|
|
|
ret = i2c_master_send(client, (u8 *)array, len);
|
|
if (ret != len) {
|
|
dev_err(&client->dev, "Couldn't send I2C command.\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd)
|
|
{
|
|
struct ssd1307fb_array *array;
|
|
int ret;
|
|
|
|
array = ssd1307fb_alloc_array(1, SSD1307FB_COMMAND);
|
|
if (!array)
|
|
return -ENOMEM;
|
|
|
|
array->data[0] = cmd;
|
|
|
|
ret = ssd1307fb_write_array(client, array, 1);
|
|
kfree(array);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline int ssd1307fb_write_data(struct i2c_client *client, u8 data)
|
|
{
|
|
struct ssd1307fb_array *array;
|
|
int ret;
|
|
|
|
array = ssd1307fb_alloc_array(1, SSD1307FB_DATA);
|
|
if (!array)
|
|
return -ENOMEM;
|
|
|
|
array->data[0] = data;
|
|
|
|
ret = ssd1307fb_write_array(client, array, 1);
|
|
kfree(array);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ssd1307fb_update_display(struct ssd1307fb_par *par)
|
|
{
|
|
struct ssd1307fb_array *array;
|
|
u8 *vmem = par->info->screen_base;
|
|
int i, j, k;
|
|
|
|
array = ssd1307fb_alloc_array(par->width * par->height / 8,
|
|
SSD1307FB_DATA);
|
|
if (!array)
|
|
return;
|
|
|
|
/*
|
|
* The screen is divided in pages, each having a height of 8
|
|
* pixels, and the width of the screen. When sending a byte of
|
|
* data to the controller, it gives the 8 bits for the current
|
|
* column. I.e, the first byte are the 8 bits of the first
|
|
* column, then the 8 bits for the second column, etc.
|
|
*
|
|
*
|
|
* Representation of the screen, assuming it is 5 bits
|
|
* wide. Each letter-number combination is a bit that controls
|
|
* one pixel.
|
|
*
|
|
* A0 A1 A2 A3 A4
|
|
* B0 B1 B2 B3 B4
|
|
* C0 C1 C2 C3 C4
|
|
* D0 D1 D2 D3 D4
|
|
* E0 E1 E2 E3 E4
|
|
* F0 F1 F2 F3 F4
|
|
* G0 G1 G2 G3 G4
|
|
* H0 H1 H2 H3 H4
|
|
*
|
|
* If you want to update this screen, you need to send 5 bytes:
|
|
* (1) A0 B0 C0 D0 E0 F0 G0 H0
|
|
* (2) A1 B1 C1 D1 E1 F1 G1 H1
|
|
* (3) A2 B2 C2 D2 E2 F2 G2 H2
|
|
* (4) A3 B3 C3 D3 E3 F3 G3 H3
|
|
* (5) A4 B4 C4 D4 E4 F4 G4 H4
|
|
*/
|
|
|
|
for (i = 0; i < (par->height / 8); i++) {
|
|
for (j = 0; j < par->width; j++) {
|
|
u32 array_idx = i * par->width + j;
|
|
array->data[array_idx] = 0;
|
|
for (k = 0; k < 8; k++) {
|
|
u32 page_length = par->width * i;
|
|
u32 index = page_length + (par->width * k + j) / 8;
|
|
u8 byte = *(vmem + index);
|
|
u8 bit = byte & (1 << (j % 8));
|
|
bit = bit >> (j % 8);
|
|
array->data[array_idx] |= bit << k;
|
|
}
|
|
}
|
|
}
|
|
|
|
ssd1307fb_write_array(par->client, array, par->width * par->height / 8);
|
|
kfree(array);
|
|
}
|
|
|
|
|
|
static ssize_t ssd1307fb_write(struct fb_info *info, const char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct ssd1307fb_par *par = info->par;
|
|
unsigned long total_size;
|
|
unsigned long p = *ppos;
|
|
u8 __iomem *dst;
|
|
|
|
total_size = info->fix.smem_len;
|
|
|
|
if (p > total_size)
|
|
return -EINVAL;
|
|
|
|
if (count + p > total_size)
|
|
count = total_size - p;
|
|
|
|
if (!count)
|
|
return -EINVAL;
|
|
|
|
dst = (void __force *) (info->screen_base + p);
|
|
|
|
if (copy_from_user(dst, buf, count))
|
|
return -EFAULT;
|
|
|
|
ssd1307fb_update_display(par);
|
|
|
|
*ppos += count;
|
|
|
|
return count;
|
|
}
|
|
|
|
static void ssd1307fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
|
|
{
|
|
struct ssd1307fb_par *par = info->par;
|
|
sys_fillrect(info, rect);
|
|
ssd1307fb_update_display(par);
|
|
}
|
|
|
|
static void ssd1307fb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
|
|
{
|
|
struct ssd1307fb_par *par = info->par;
|
|
sys_copyarea(info, area);
|
|
ssd1307fb_update_display(par);
|
|
}
|
|
|
|
static void ssd1307fb_imageblit(struct fb_info *info, const struct fb_image *image)
|
|
{
|
|
struct ssd1307fb_par *par = info->par;
|
|
sys_imageblit(info, image);
|
|
ssd1307fb_update_display(par);
|
|
}
|
|
|
|
static struct fb_ops ssd1307fb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_read = fb_sys_read,
|
|
.fb_write = ssd1307fb_write,
|
|
.fb_fillrect = ssd1307fb_fillrect,
|
|
.fb_copyarea = ssd1307fb_copyarea,
|
|
.fb_imageblit = ssd1307fb_imageblit,
|
|
};
|
|
|
|
static void ssd1307fb_deferred_io(struct fb_info *info,
|
|
struct list_head *pagelist)
|
|
{
|
|
ssd1307fb_update_display(info->par);
|
|
}
|
|
|
|
static struct fb_deferred_io ssd1307fb_defio = {
|
|
.delay = HZ,
|
|
.deferred_io = ssd1307fb_deferred_io,
|
|
};
|
|
|
|
static int ssd1307fb_ssd1307_init(struct ssd1307fb_par *par)
|
|
{
|
|
int ret;
|
|
|
|
par->pwm = pwm_get(&par->client->dev, NULL);
|
|
if (IS_ERR(par->pwm)) {
|
|
dev_err(&par->client->dev, "Could not get PWM from device tree!\n");
|
|
return PTR_ERR(par->pwm);
|
|
}
|
|
|
|
par->pwm_period = pwm_get_period(par->pwm);
|
|
/* Enable the PWM */
|
|
pwm_config(par->pwm, par->pwm_period / 2, par->pwm_period);
|
|
pwm_enable(par->pwm);
|
|
|
|
dev_dbg(&par->client->dev, "Using PWM%d with a %dns period.\n",
|
|
par->pwm->pwm, par->pwm_period);
|
|
|
|
/* Map column 127 of the OLED to segment 0 */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Turn on the display */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ssd1307fb_ssd1307_remove(struct ssd1307fb_par *par)
|
|
{
|
|
pwm_disable(par->pwm);
|
|
pwm_put(par->pwm);
|
|
return 0;
|
|
}
|
|
|
|
static struct ssd1307fb_ops ssd1307fb_ssd1307_ops = {
|
|
.init = ssd1307fb_ssd1307_init,
|
|
.remove = ssd1307fb_ssd1307_remove,
|
|
};
|
|
|
|
static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
|
|
{
|
|
int ret;
|
|
|
|
/* Set initial contrast */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST);
|
|
ret = ret & ssd1307fb_write_cmd(par->client, 0x7f);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set COM direction */
|
|
ret = ssd1307fb_write_cmd(par->client, 0xc8);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set segment re-map */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set multiplex ratio value */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_MULTIPLEX_RATIO);
|
|
ret = ret & ssd1307fb_write_cmd(par->client, par->height - 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* set display offset value */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_DISPLAY_OFFSET);
|
|
ret = ssd1307fb_write_cmd(par->client, 0x20);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set clock frequency */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_CLOCK_FREQ);
|
|
ret = ret & ssd1307fb_write_cmd(par->client, 0xf0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set precharge period in number of ticks from the internal clock */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PRECHARGE_PERIOD);
|
|
ret = ret & ssd1307fb_write_cmd(par->client, 0x22);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set COM pins configuration */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COM_PINS_CONFIG);
|
|
ret = ret & ssd1307fb_write_cmd(par->client, 0x22);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set VCOMH */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_VCOMH);
|
|
ret = ret & ssd1307fb_write_cmd(par->client, 0x49);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Turn on the DC-DC Charge Pump */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP);
|
|
ret = ret & ssd1307fb_write_cmd(par->client, 0x14);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Switch to horizontal addressing mode */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_ADDRESS_MODE);
|
|
ret = ret & ssd1307fb_write_cmd(par->client,
|
|
SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE);
|
|
ret = ret & ssd1307fb_write_cmd(par->client, 0x0);
|
|
ret = ret & ssd1307fb_write_cmd(par->client, par->width - 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE);
|
|
ret = ret & ssd1307fb_write_cmd(par->client, 0x0);
|
|
ret = ret & ssd1307fb_write_cmd(par->client,
|
|
par->page_offset + (par->height / 8) - 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Turn on the display */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct ssd1307fb_ops ssd1307fb_ssd1306_ops = {
|
|
.init = ssd1307fb_ssd1306_init,
|
|
};
|
|
|
|
static const struct of_device_id ssd1307fb_of_match[] = {
|
|
{
|
|
.compatible = "solomon,ssd1306fb-i2c",
|
|
.data = (void *)&ssd1307fb_ssd1306_ops,
|
|
},
|
|
{
|
|
.compatible = "solomon,ssd1307fb-i2c",
|
|
.data = (void *)&ssd1307fb_ssd1307_ops,
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ssd1307fb_of_match);
|
|
|
|
static int ssd1307fb_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct fb_info *info;
|
|
struct device_node *node = client->dev.of_node;
|
|
u32 vmem_size;
|
|
struct ssd1307fb_par *par;
|
|
u8 *vmem;
|
|
int ret;
|
|
|
|
if (!node) {
|
|
dev_err(&client->dev, "No device tree data found!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
info = framebuffer_alloc(sizeof(struct ssd1307fb_par), &client->dev);
|
|
if (!info) {
|
|
dev_err(&client->dev, "Couldn't allocate framebuffer.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
par = info->par;
|
|
par->info = info;
|
|
par->client = client;
|
|
|
|
par->ops = (struct ssd1307fb_ops *)of_match_device(ssd1307fb_of_match,
|
|
&client->dev)->data;
|
|
|
|
par->reset = of_get_named_gpio(client->dev.of_node,
|
|
"reset-gpios", 0);
|
|
if (!gpio_is_valid(par->reset)) {
|
|
ret = -EINVAL;
|
|
goto fb_alloc_error;
|
|
}
|
|
|
|
if (of_property_read_u32(node, "solomon,width", &par->width))
|
|
par->width = 96;
|
|
|
|
if (of_property_read_u32(node, "solomon,height", &par->height))
|
|
par->width = 16;
|
|
|
|
if (of_property_read_u32(node, "solomon,page-offset", &par->page_offset))
|
|
par->page_offset = 1;
|
|
|
|
vmem_size = par->width * par->height / 8;
|
|
|
|
vmem = devm_kzalloc(&client->dev, vmem_size, GFP_KERNEL);
|
|
if (!vmem) {
|
|
dev_err(&client->dev, "Couldn't allocate graphical memory.\n");
|
|
ret = -ENOMEM;
|
|
goto fb_alloc_error;
|
|
}
|
|
|
|
info->fbops = &ssd1307fb_ops;
|
|
info->fix = ssd1307fb_fix;
|
|
info->fix.line_length = par->width / 8;
|
|
info->fbdefio = &ssd1307fb_defio;
|
|
|
|
info->var = ssd1307fb_var;
|
|
info->var.xres = par->width;
|
|
info->var.xres_virtual = par->width;
|
|
info->var.yres = par->height;
|
|
info->var.yres_virtual = par->height;
|
|
|
|
info->var.red.length = 1;
|
|
info->var.red.offset = 0;
|
|
info->var.green.length = 1;
|
|
info->var.green.offset = 0;
|
|
info->var.blue.length = 1;
|
|
info->var.blue.offset = 0;
|
|
|
|
info->screen_base = (u8 __force __iomem *)vmem;
|
|
info->fix.smem_start = (unsigned long)vmem;
|
|
info->fix.smem_len = vmem_size;
|
|
|
|
fb_deferred_io_init(info);
|
|
|
|
ret = devm_gpio_request_one(&client->dev, par->reset,
|
|
GPIOF_OUT_INIT_HIGH,
|
|
"oled-reset");
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"failed to request gpio %d: %d\n",
|
|
par->reset, ret);
|
|
goto reset_oled_error;
|
|
}
|
|
|
|
i2c_set_clientdata(client, info);
|
|
|
|
/* Reset the screen */
|
|
gpio_set_value(par->reset, 0);
|
|
udelay(4);
|
|
gpio_set_value(par->reset, 1);
|
|
udelay(4);
|
|
|
|
if (par->ops->init) {
|
|
ret = par->ops->init(par);
|
|
if (ret)
|
|
goto reset_oled_error;
|
|
}
|
|
|
|
ret = register_framebuffer(info);
|
|
if (ret) {
|
|
dev_err(&client->dev, "Couldn't register the framebuffer\n");
|
|
goto panel_init_error;
|
|
}
|
|
|
|
dev_info(&client->dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size);
|
|
|
|
return 0;
|
|
|
|
panel_init_error:
|
|
if (par->ops->remove)
|
|
par->ops->remove(par);
|
|
reset_oled_error:
|
|
fb_deferred_io_cleanup(info);
|
|
fb_alloc_error:
|
|
framebuffer_release(info);
|
|
return ret;
|
|
}
|
|
|
|
static int ssd1307fb_remove(struct i2c_client *client)
|
|
{
|
|
struct fb_info *info = i2c_get_clientdata(client);
|
|
struct ssd1307fb_par *par = info->par;
|
|
|
|
unregister_framebuffer(info);
|
|
if (par->ops->remove)
|
|
par->ops->remove(par);
|
|
fb_deferred_io_cleanup(info);
|
|
framebuffer_release(info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id ssd1307fb_i2c_id[] = {
|
|
{ "ssd1306fb", 0 },
|
|
{ "ssd1307fb", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ssd1307fb_i2c_id);
|
|
|
|
static struct i2c_driver ssd1307fb_driver = {
|
|
.probe = ssd1307fb_probe,
|
|
.remove = ssd1307fb_remove,
|
|
.id_table = ssd1307fb_i2c_id,
|
|
.driver = {
|
|
.name = "ssd1307fb",
|
|
.of_match_table = ssd1307fb_of_match,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
module_i2c_driver(ssd1307fb_driver);
|
|
|
|
MODULE_DESCRIPTION("FB driver for the Solomon SSD1307 OLED controller");
|
|
MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
|
|
MODULE_LICENSE("GPL");
|