openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/net/wireless/iwlegacy/4965.c

2427 lines
65 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
#include "common.h"
#include "4965.h"
#define IL_AC_UNSET -1
/**
* il_verify_inst_sparse - verify runtime uCode image in card vs. host,
* using sample data 100 bytes apart. If these sample points are good,
* it's a pretty good bet that everything between them is good, too.
*/
static int
il4965_verify_inst_sparse(struct il_priv *il, __le32 *image, u32 len)
{
u32 val;
int ret = 0;
u32 errcnt = 0;
u32 i;
D_INFO("ucode inst image size is %u\n", len);
for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
/* read data comes through single port, auto-incr addr */
/* NOTE: Use the debugless read so we don't flood kernel log
* if IL_DL_IO is set */
il_wr(il, HBUS_TARG_MEM_RADDR,
i + IL4965_RTC_INST_LOWER_BOUND);
val = _il_rd(il, HBUS_TARG_MEM_RDAT);
if (val != le32_to_cpu(*image)) {
ret = -EIO;
errcnt++;
if (errcnt >= 3)
break;
}
}
return ret;
}
/**
* il4965_verify_inst_full - verify runtime uCode image in card vs. host,
* looking at all data.
*/
static int il4965_verify_inst_full(struct il_priv *il, __le32 *image,
u32 len)
{
u32 val;
u32 save_len = len;
int ret = 0;
u32 errcnt;
D_INFO("ucode inst image size is %u\n", len);
il_wr(il, HBUS_TARG_MEM_RADDR,
IL4965_RTC_INST_LOWER_BOUND);
errcnt = 0;
for (; len > 0; len -= sizeof(u32), image++) {
/* read data comes through single port, auto-incr addr */
/* NOTE: Use the debugless read so we don't flood kernel log
* if IL_DL_IO is set */
val = _il_rd(il, HBUS_TARG_MEM_RDAT);
if (val != le32_to_cpu(*image)) {
IL_ERR("uCode INST section is invalid at "
"offset 0x%x, is 0x%x, s/b 0x%x\n",
save_len - len, val, le32_to_cpu(*image));
ret = -EIO;
errcnt++;
if (errcnt >= 20)
break;
}
}
if (!errcnt)
D_INFO(
"ucode image in INSTRUCTION memory is good\n");
return ret;
}
/**
* il4965_verify_ucode - determine which instruction image is in SRAM,
* and verify its contents
*/
int il4965_verify_ucode(struct il_priv *il)
{
__le32 *image;
u32 len;
int ret;
/* Try bootstrap */
image = (__le32 *)il->ucode_boot.v_addr;
len = il->ucode_boot.len;
ret = il4965_verify_inst_sparse(il, image, len);
if (!ret) {
D_INFO("Bootstrap uCode is good in inst SRAM\n");
return 0;
}
/* Try initialize */
image = (__le32 *)il->ucode_init.v_addr;
len = il->ucode_init.len;
ret = il4965_verify_inst_sparse(il, image, len);
if (!ret) {
D_INFO("Initialize uCode is good in inst SRAM\n");
return 0;
}
/* Try runtime/protocol */
image = (__le32 *)il->ucode_code.v_addr;
len = il->ucode_code.len;
ret = il4965_verify_inst_sparse(il, image, len);
if (!ret) {
D_INFO("Runtime uCode is good in inst SRAM\n");
return 0;
}
IL_ERR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
/* Since nothing seems to match, show first several data entries in
* instruction SRAM, so maybe visual inspection will give a clue.
* Selection of bootstrap image (vs. other images) is arbitrary. */
image = (__le32 *)il->ucode_boot.v_addr;
len = il->ucode_boot.len;
ret = il4965_verify_inst_full(il, image, len);
return ret;
}
/******************************************************************************
*
* EEPROM related functions
*
******************************************************************************/
/*
* The device's EEPROM semaphore prevents conflicts between driver and uCode
* when accessing the EEPROM; each access is a series of pulses to/from the
* EEPROM chip, not a single event, so even reads could conflict if they
* weren't arbitrated by the semaphore.
*/
int il4965_eeprom_acquire_semaphore(struct il_priv *il)
{
u16 count;
int ret;
for (count = 0; count < EEPROM_SEM_RETRY_LIMIT; count++) {
/* Request semaphore */
il_set_bit(il, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
/* See if we got it */
ret = _il_poll_bit(il, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
EEPROM_SEM_TIMEOUT);
if (ret >= 0)
return ret;
}
return ret;
}
void il4965_eeprom_release_semaphore(struct il_priv *il)
{
il_clear_bit(il, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
}
int il4965_eeprom_check_version(struct il_priv *il)
{
u16 eeprom_ver;
u16 calib_ver;
eeprom_ver = il_eeprom_query16(il, EEPROM_VERSION);
calib_ver = il_eeprom_query16(il,
EEPROM_4965_CALIB_VERSION_OFFSET);
if (eeprom_ver < il->cfg->eeprom_ver ||
calib_ver < il->cfg->eeprom_calib_ver)
goto err;
IL_INFO("device EEPROM VER=0x%x, CALIB=0x%x\n",
eeprom_ver, calib_ver);
return 0;
err:
IL_ERR("Unsupported (too old) EEPROM VER=0x%x < 0x%x "
"CALIB=0x%x < 0x%x\n",
eeprom_ver, il->cfg->eeprom_ver,
calib_ver, il->cfg->eeprom_calib_ver);
return -EINVAL;
}
void il4965_eeprom_get_mac(const struct il_priv *il, u8 *mac)
{
const u8 *addr = il_eeprom_query_addr(il,
EEPROM_MAC_ADDRESS);
memcpy(mac, addr, ETH_ALEN);
}
/* Send led command */
static int
il4965_send_led_cmd(struct il_priv *il, struct il_led_cmd *led_cmd)
{
struct il_host_cmd cmd = {
.id = C_LEDS,
.len = sizeof(struct il_led_cmd),
.data = led_cmd,
.flags = CMD_ASYNC,
.callback = NULL,
};
u32 reg;
reg = _il_rd(il, CSR_LED_REG);
if (reg != (reg & CSR_LED_BSM_CTRL_MSK))
_il_wr(il, CSR_LED_REG, reg & CSR_LED_BSM_CTRL_MSK);
return il_send_cmd(il, &cmd);
}
/* Set led register off */
void il4965_led_enable(struct il_priv *il)
{
_il_wr(il, CSR_LED_REG, CSR_LED_REG_TRUN_ON);
}
const struct il_led_ops il4965_led_ops = {
.cmd = il4965_send_led_cmd,
};
static int il4965_send_tx_power(struct il_priv *il);
static int il4965_hw_get_temperature(struct il_priv *il);
/* Highest firmware API version supported */
#define IL4965_UCODE_API_MAX 2
/* Lowest firmware API version supported */
#define IL4965_UCODE_API_MIN 2
#define IL4965_FW_PRE "iwlwifi-4965-"
#define _IL4965_MODULE_FIRMWARE(api) IL4965_FW_PRE #api ".ucode"
#define IL4965_MODULE_FIRMWARE(api) _IL4965_MODULE_FIRMWARE(api)
/* check contents of special bootstrap uCode SRAM */
static int il4965_verify_bsm(struct il_priv *il)
{
__le32 *image = il->ucode_boot.v_addr;
u32 len = il->ucode_boot.len;
u32 reg;
u32 val;
D_INFO("Begin verify bsm\n");
/* verify BSM SRAM contents */
val = il_rd_prph(il, BSM_WR_DWCOUNT_REG);
for (reg = BSM_SRAM_LOWER_BOUND;
reg < BSM_SRAM_LOWER_BOUND + len;
reg += sizeof(u32), image++) {
val = il_rd_prph(il, reg);
if (val != le32_to_cpu(*image)) {
IL_ERR("BSM uCode verification failed at "
"addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
BSM_SRAM_LOWER_BOUND,
reg - BSM_SRAM_LOWER_BOUND, len,
val, le32_to_cpu(*image));
return -EIO;
}
}
D_INFO("BSM bootstrap uCode image OK\n");
return 0;
}
/**
* il4965_load_bsm - Load bootstrap instructions
*
* BSM operation:
*
* The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
* in special SRAM that does not power down during RFKILL. When powering back
* up after power-saving sleeps (or during initial uCode load), the BSM loads
* the bootstrap program into the on-board processor, and starts it.
*
* The bootstrap program loads (via DMA) instructions and data for a new
* program from host DRAM locations indicated by the host driver in the
* BSM_DRAM_* registers. Once the new program is loaded, it starts
* automatically.
*
* When initializing the NIC, the host driver points the BSM to the
* "initialize" uCode image. This uCode sets up some internal data, then
* notifies host via "initialize alive" that it is complete.
*
* The host then replaces the BSM_DRAM_* pointer values to point to the
* normal runtime uCode instructions and a backup uCode data cache buffer
* (filled initially with starting data values for the on-board processor),
* then triggers the "initialize" uCode to load and launch the runtime uCode,
* which begins normal operation.
*
* When doing a power-save shutdown, runtime uCode saves data SRAM into
* the backup data cache in DRAM before SRAM is powered down.
*
* When powering back up, the BSM loads the bootstrap program. This reloads
* the runtime uCode instructions and the backup data cache into SRAM,
* and re-launches the runtime uCode from where it left off.
*/
static int il4965_load_bsm(struct il_priv *il)
{
__le32 *image = il->ucode_boot.v_addr;
u32 len = il->ucode_boot.len;
dma_addr_t pinst;
dma_addr_t pdata;
u32 inst_len;
u32 data_len;
int i;
u32 done;
u32 reg_offset;
int ret;
D_INFO("Begin load bsm\n");
il->ucode_type = UCODE_RT;
/* make sure bootstrap program is no larger than BSM's SRAM size */
if (len > IL49_MAX_BSM_SIZE)
return -EINVAL;
/* Tell bootstrap uCode where to find the "Initialize" uCode
* in host DRAM ... host DRAM physical address bits 35:4 for 4965.
* NOTE: il_init_alive_start() will replace these values,
* after the "initialize" uCode has run, to point to
* runtime/protocol instructions and backup data cache.
*/
pinst = il->ucode_init.p_addr >> 4;
pdata = il->ucode_init_data.p_addr >> 4;
inst_len = il->ucode_init.len;
data_len = il->ucode_init_data.len;
il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
/* Fill BSM memory with bootstrap instructions */
for (reg_offset = BSM_SRAM_LOWER_BOUND;
reg_offset < BSM_SRAM_LOWER_BOUND + len;
reg_offset += sizeof(u32), image++)
_il_wr_prph(il, reg_offset, le32_to_cpu(*image));
ret = il4965_verify_bsm(il);
if (ret)
return ret;
/* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0);
il_wr_prph(il,
BSM_WR_MEM_DST_REG, IL49_RTC_INST_LOWER_BOUND);
il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
/* Load bootstrap code into instruction SRAM now,
* to prepare to load "initialize" uCode */
il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
/* Wait for load of bootstrap uCode to finish */
for (i = 0; i < 100; i++) {
done = il_rd_prph(il, BSM_WR_CTRL_REG);
if (!(done & BSM_WR_CTRL_REG_BIT_START))
break;
udelay(10);
}
if (i < 100)
D_INFO("BSM write complete, poll %d iterations\n", i);
else {
IL_ERR("BSM write did not complete!\n");
return -EIO;
}
/* Enable future boot loads whenever power management unit triggers it
* (e.g. when powering back up after power-save shutdown) */
il_wr_prph(il,
BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
return 0;
}
/**
* il4965_set_ucode_ptrs - Set uCode address location
*
* Tell initialization uCode where to find runtime uCode.
*
* BSM registers initially contain pointers to initialization uCode.
* We need to replace them to load runtime uCode inst and data,
* and to save runtime data when powering down.
*/
static int il4965_set_ucode_ptrs(struct il_priv *il)
{
dma_addr_t pinst;
dma_addr_t pdata;
int ret = 0;
/* bits 35:4 for 4965 */
pinst = il->ucode_code.p_addr >> 4;
pdata = il->ucode_data_backup.p_addr >> 4;
/* Tell bootstrap uCode where to find image to load */
il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG,
il->ucode_data.len);
/* Inst byte count must be last to set up, bit 31 signals uCode
* that all new ptr/size info is in place */
il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
il->ucode_code.len | BSM_DRAM_INST_LOAD);
D_INFO("Runtime uCode pointers are set.\n");
return ret;
}
/**
* il4965_init_alive_start - Called after N_ALIVE notification received
*
* Called after N_ALIVE notification received from "initialize" uCode.
*
* The 4965 "initialize" ALIVE reply contains calibration data for:
* Voltage, temperature, and MIMO tx gain correction, now stored in il
* (3945 does not contain this data).
*
* Tell "initialize" uCode to go ahead and load the runtime uCode.
*/
static void il4965_init_alive_start(struct il_priv *il)
{
/* Bootstrap uCode has loaded initialize uCode ... verify inst image.
* This is a paranoid check, because we would not have gotten the
* "initialize" alive if code weren't properly loaded. */
if (il4965_verify_ucode(il)) {
/* Runtime instruction load was bad;
* take it all the way back down so we can try again */
D_INFO("Bad \"initialize\" uCode load.\n");
goto restart;
}
/* Calculate temperature */
il->temperature = il4965_hw_get_temperature(il);
/* Send pointers to protocol/runtime uCode image ... init code will
* load and launch runtime uCode, which will send us another "Alive"
* notification. */
D_INFO("Initialization Alive received.\n");
if (il4965_set_ucode_ptrs(il)) {
/* Runtime instruction load won't happen;
* take it all the way back down so we can try again */
D_INFO("Couldn't set up uCode pointers.\n");
goto restart;
}
return;
restart:
queue_work(il->workqueue, &il->restart);
}
static bool iw4965_is_ht40_channel(__le32 rxon_flags)
{
int chan_mod = le32_to_cpu(rxon_flags & RXON_FLG_CHANNEL_MODE_MSK)
>> RXON_FLG_CHANNEL_MODE_POS;
return (chan_mod == CHANNEL_MODE_PURE_40 ||
chan_mod == CHANNEL_MODE_MIXED);
}
static void il4965_nic_config(struct il_priv *il)
{
unsigned long flags;
u16 radio_cfg;
spin_lock_irqsave(&il->lock, flags);
radio_cfg = il_eeprom_query16(il, EEPROM_RADIO_CONFIG);
/* write radio config values to register */
if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX)
il_set_bit(il, CSR_HW_IF_CONFIG_REG,
EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
EEPROM_RF_CFG_DASH_MSK(radio_cfg));
/* set CSR_HW_CONFIG_REG for uCode use */
il_set_bit(il, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
il->calib_info = (struct il_eeprom_calib_info *)
il_eeprom_query_addr(il,
EEPROM_4965_CALIB_TXPOWER_OFFSET);
spin_unlock_irqrestore(&il->lock, flags);
}
/* Reset differential Rx gains in NIC to prepare for chain noise calibration.
* Called after every association, but this runs only once!
* ... once chain noise is calibrated the first time, it's good forever. */
static void il4965_chain_noise_reset(struct il_priv *il)
{
struct il_chain_noise_data *data = &(il->chain_noise_data);
if (data->state == IL_CHAIN_NOISE_ALIVE &&
il_is_any_associated(il)) {
struct il_calib_diff_gain_cmd cmd;
/* clear data for chain noise calibration algorithm */
data->chain_noise_a = 0;
data->chain_noise_b = 0;
data->chain_noise_c = 0;
data->chain_signal_a = 0;
data->chain_signal_b = 0;
data->chain_signal_c = 0;
data->beacon_count = 0;
memset(&cmd, 0, sizeof(cmd));
cmd.hdr.op_code = IL_PHY_CALIBRATE_DIFF_GAIN_CMD;
cmd.diff_gain_a = 0;
cmd.diff_gain_b = 0;
cmd.diff_gain_c = 0;
if (il_send_cmd_pdu(il, C_PHY_CALIBRATION,
sizeof(cmd), &cmd))
IL_ERR(
"Could not send C_PHY_CALIBRATION\n");
data->state = IL_CHAIN_NOISE_ACCUMULATE;
D_CALIB("Run chain_noise_calibrate\n");
}
}
static struct il_sensitivity_ranges il4965_sensitivity = {
.min_nrg_cck = 97,
.max_nrg_cck = 0, /* not used, set to 0 */
.auto_corr_min_ofdm = 85,
.auto_corr_min_ofdm_mrc = 170,
.auto_corr_min_ofdm_x1 = 105,
.auto_corr_min_ofdm_mrc_x1 = 220,
.auto_corr_max_ofdm = 120,
.auto_corr_max_ofdm_mrc = 210,
.auto_corr_max_ofdm_x1 = 140,
.auto_corr_max_ofdm_mrc_x1 = 270,
.auto_corr_min_cck = 125,
.auto_corr_max_cck = 200,
.auto_corr_min_cck_mrc = 200,
.auto_corr_max_cck_mrc = 400,
.nrg_th_cck = 100,
.nrg_th_ofdm = 100,
.barker_corr_th_min = 190,
.barker_corr_th_min_mrc = 390,
.nrg_th_cca = 62,
};
static void il4965_set_ct_threshold(struct il_priv *il)
{
/* want Kelvin */
il->hw_params.ct_kill_threshold =
CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY);
}
/**
* il4965_hw_set_hw_params
*
* Called when initializing driver
*/
static int il4965_hw_set_hw_params(struct il_priv *il)
{
if (il->cfg->mod_params->num_of_queues >= IL_MIN_NUM_QUEUES &&
il->cfg->mod_params->num_of_queues <= IL49_NUM_QUEUES)
il->cfg->base_params->num_of_queues =
il->cfg->mod_params->num_of_queues;
il->hw_params.max_txq_num = il->cfg->base_params->num_of_queues;
il->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM;
il->hw_params.scd_bc_tbls_size =
il->cfg->base_params->num_of_queues *
sizeof(struct il4965_scd_bc_tbl);
il->hw_params.tfd_size = sizeof(struct il_tfd);
il->hw_params.max_stations = IL4965_STATION_COUNT;
il->ctx.bcast_sta_id = IL4965_BROADCAST_ID;
il->hw_params.max_data_size = IL49_RTC_DATA_SIZE;
il->hw_params.max_inst_size = IL49_RTC_INST_SIZE;
il->hw_params.max_bsm_size = BSM_SRAM_SIZE;
il->hw_params.ht40_channel = BIT(IEEE80211_BAND_5GHZ);
il->hw_params.rx_wrt_ptr_reg = FH49_RSCSR_CHNL0_WPTR;
il->hw_params.tx_chains_num = il4965_num_of_ant(il->cfg->valid_tx_ant);
il->hw_params.rx_chains_num = il4965_num_of_ant(il->cfg->valid_rx_ant);
il->hw_params.valid_tx_ant = il->cfg->valid_tx_ant;
il->hw_params.valid_rx_ant = il->cfg->valid_rx_ant;
il4965_set_ct_threshold(il);
il->hw_params.sens = &il4965_sensitivity;
il->hw_params.beacon_time_tsf_bits = IL4965_EXT_BEACON_TIME_POS;
return 0;
}
static s32 il4965_math_div_round(s32 num, s32 denom, s32 *res)
{
s32 sign = 1;
if (num < 0) {
sign = -sign;
num = -num;
}
if (denom < 0) {
sign = -sign;
denom = -denom;
}
*res = 1;
*res = ((num * 2 + denom) / (denom * 2)) * sign;
return 1;
}
/**
* il4965_get_voltage_compensation - Power supply voltage comp for txpower
*
* Determines power supply voltage compensation for txpower calculations.
* Returns number of 1/2-dB steps to subtract from gain table idx,
* to compensate for difference between power supply voltage during
* factory measurements, vs. current power supply voltage.
*
* Voltage indication is higher for lower voltage.
* Lower voltage requires more gain (lower gain table idx).
*/
static s32 il4965_get_voltage_compensation(s32 eeprom_voltage,
s32 current_voltage)
{
s32 comp = 0;
if (TX_POWER_IL_ILLEGAL_VOLTAGE == eeprom_voltage ||
TX_POWER_IL_ILLEGAL_VOLTAGE == current_voltage)
return 0;
il4965_math_div_round(current_voltage - eeprom_voltage,
TX_POWER_IL_VOLTAGE_CODES_PER_03V, &comp);
if (current_voltage > eeprom_voltage)
comp *= 2;
if ((comp < -2) || (comp > 2))
comp = 0;
return comp;
}
static s32 il4965_get_tx_atten_grp(u16 channel)
{
if (channel >= CALIB_IL_TX_ATTEN_GR5_FCH &&
channel <= CALIB_IL_TX_ATTEN_GR5_LCH)
return CALIB_CH_GROUP_5;
if (channel >= CALIB_IL_TX_ATTEN_GR1_FCH &&
channel <= CALIB_IL_TX_ATTEN_GR1_LCH)
return CALIB_CH_GROUP_1;
if (channel >= CALIB_IL_TX_ATTEN_GR2_FCH &&
channel <= CALIB_IL_TX_ATTEN_GR2_LCH)
return CALIB_CH_GROUP_2;
if (channel >= CALIB_IL_TX_ATTEN_GR3_FCH &&
channel <= CALIB_IL_TX_ATTEN_GR3_LCH)
return CALIB_CH_GROUP_3;
if (channel >= CALIB_IL_TX_ATTEN_GR4_FCH &&
channel <= CALIB_IL_TX_ATTEN_GR4_LCH)
return CALIB_CH_GROUP_4;
return -EINVAL;
}
static u32 il4965_get_sub_band(const struct il_priv *il, u32 channel)
{
s32 b = -1;
for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) {
if (il->calib_info->band_info[b].ch_from == 0)
continue;
if (channel >= il->calib_info->band_info[b].ch_from &&
channel <= il->calib_info->band_info[b].ch_to)
break;
}
return b;
}
static s32 il4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2)
{
s32 val;
if (x2 == x1)
return y1;
else {
il4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val);
return val + y2;
}
}
/**
* il4965_interpolate_chan - Interpolate factory measurements for one channel
*
* Interpolates factory measurements from the two sample channels within a
* sub-band, to apply to channel of interest. Interpolation is proportional to
* differences in channel frequencies, which is proportional to differences
* in channel number.
*/
static int il4965_interpolate_chan(struct il_priv *il, u32 channel,
struct il_eeprom_calib_ch_info *chan_info)
{
s32 s = -1;
u32 c;
u32 m;
const struct il_eeprom_calib_measure *m1;
const struct il_eeprom_calib_measure *m2;
struct il_eeprom_calib_measure *omeas;
u32 ch_i1;
u32 ch_i2;
s = il4965_get_sub_band(il, channel);
if (s >= EEPROM_TX_POWER_BANDS) {
IL_ERR("Tx Power can not find channel %d\n", channel);
return -1;
}
ch_i1 = il->calib_info->band_info[s].ch1.ch_num;
ch_i2 = il->calib_info->band_info[s].ch2.ch_num;
chan_info->ch_num = (u8) channel;
D_TXPOWER("channel %d subband %d factory cal ch %d & %d\n",
channel, s, ch_i1, ch_i2);
for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) {
for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) {
m1 = &(il->calib_info->band_info[s].ch1.
measurements[c][m]);
m2 = &(il->calib_info->band_info[s].ch2.
measurements[c][m]);
omeas = &(chan_info->measurements[c][m]);
omeas->actual_pow =
(u8) il4965_interpolate_value(channel, ch_i1,
m1->actual_pow,
ch_i2,
m2->actual_pow);
omeas->gain_idx =
(u8) il4965_interpolate_value(channel, ch_i1,
m1->gain_idx, ch_i2,
m2->gain_idx);
omeas->temperature =
(u8) il4965_interpolate_value(channel, ch_i1,
m1->temperature,
ch_i2,
m2->temperature);
omeas->pa_det =
(s8) il4965_interpolate_value(channel, ch_i1,
m1->pa_det, ch_i2,
m2->pa_det);
D_TXPOWER(
"chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m,
m1->actual_pow, m2->actual_pow, omeas->actual_pow);
D_TXPOWER(
"chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m,
m1->gain_idx, m2->gain_idx, omeas->gain_idx);
D_TXPOWER(
"chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m,
m1->pa_det, m2->pa_det, omeas->pa_det);
D_TXPOWER(
"chain %d meas %d T1=%d T2=%d T=%d\n", c, m,
m1->temperature, m2->temperature,
omeas->temperature);
}
}
return 0;
}
/* bit-rate-dependent table to prevent Tx distortion, in half-dB units,
* for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */
static s32 back_off_table[] = {
10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 20 MHz */
10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 20 MHz */
10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 40 MHz */
10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 40 MHz */
10 /* CCK */
};
/* Thermal compensation values for txpower for various frequency ranges ...
* ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */
static struct il4965_txpower_comp_entry {
s32 degrees_per_05db_a;
s32 degrees_per_05db_a_denom;
} tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = {
{9, 2}, /* group 0 5.2, ch 34-43 */
{4, 1}, /* group 1 5.2, ch 44-70 */
{4, 1}, /* group 2 5.2, ch 71-124 */
{4, 1}, /* group 3 5.2, ch 125-200 */
{3, 1} /* group 4 2.4, ch all */
};
static s32 get_min_power_idx(s32 rate_power_idx, u32 band)
{
if (!band) {
if ((rate_power_idx & 7) <= 4)
return MIN_TX_GAIN_IDX_52GHZ_EXT;
}
return MIN_TX_GAIN_IDX;
}
struct gain_entry {
u8 dsp;
u8 radio;
};
static const struct gain_entry gain_table[2][108] = {
/* 5.2GHz power gain idx table */
{
{123, 0x3F}, /* highest txpower */
{117, 0x3F},
{110, 0x3F},
{104, 0x3F},
{98, 0x3F},
{110, 0x3E},
{104, 0x3E},
{98, 0x3E},
{110, 0x3D},
{104, 0x3D},
{98, 0x3D},
{110, 0x3C},
{104, 0x3C},
{98, 0x3C},
{110, 0x3B},
{104, 0x3B},
{98, 0x3B},
{110, 0x3A},
{104, 0x3A},
{98, 0x3A},
{110, 0x39},
{104, 0x39},
{98, 0x39},
{110, 0x38},
{104, 0x38},
{98, 0x38},
{110, 0x37},
{104, 0x37},
{98, 0x37},
{110, 0x36},
{104, 0x36},
{98, 0x36},
{110, 0x35},
{104, 0x35},
{98, 0x35},
{110, 0x34},
{104, 0x34},
{98, 0x34},
{110, 0x33},
{104, 0x33},
{98, 0x33},
{110, 0x32},
{104, 0x32},
{98, 0x32},
{110, 0x31},
{104, 0x31},
{98, 0x31},
{110, 0x30},
{104, 0x30},
{98, 0x30},
{110, 0x25},
{104, 0x25},
{98, 0x25},
{110, 0x24},
{104, 0x24},
{98, 0x24},
{110, 0x23},
{104, 0x23},
{98, 0x23},
{110, 0x22},
{104, 0x18},
{98, 0x18},
{110, 0x17},
{104, 0x17},
{98, 0x17},
{110, 0x16},
{104, 0x16},
{98, 0x16},
{110, 0x15},
{104, 0x15},
{98, 0x15},
{110, 0x14},
{104, 0x14},
{98, 0x14},
{110, 0x13},
{104, 0x13},
{98, 0x13},
{110, 0x12},
{104, 0x08},
{98, 0x08},
{110, 0x07},
{104, 0x07},
{98, 0x07},
{110, 0x06},
{104, 0x06},
{98, 0x06},
{110, 0x05},
{104, 0x05},
{98, 0x05},
{110, 0x04},
{104, 0x04},
{98, 0x04},
{110, 0x03},
{104, 0x03},
{98, 0x03},
{110, 0x02},
{104, 0x02},
{98, 0x02},
{110, 0x01},
{104, 0x01},
{98, 0x01},
{110, 0x00},
{104, 0x00},
{98, 0x00},
{93, 0x00},
{88, 0x00},
{83, 0x00},
{78, 0x00},
},
/* 2.4GHz power gain idx table */
{
{110, 0x3f}, /* highest txpower */
{104, 0x3f},
{98, 0x3f},
{110, 0x3e},
{104, 0x3e},
{98, 0x3e},
{110, 0x3d},
{104, 0x3d},
{98, 0x3d},
{110, 0x3c},
{104, 0x3c},
{98, 0x3c},
{110, 0x3b},
{104, 0x3b},
{98, 0x3b},
{110, 0x3a},
{104, 0x3a},
{98, 0x3a},
{110, 0x39},
{104, 0x39},
{98, 0x39},
{110, 0x38},
{104, 0x38},
{98, 0x38},
{110, 0x37},
{104, 0x37},
{98, 0x37},
{110, 0x36},
{104, 0x36},
{98, 0x36},
{110, 0x35},
{104, 0x35},
{98, 0x35},
{110, 0x34},
{104, 0x34},
{98, 0x34},
{110, 0x33},
{104, 0x33},
{98, 0x33},
{110, 0x32},
{104, 0x32},
{98, 0x32},
{110, 0x31},
{104, 0x31},
{98, 0x31},
{110, 0x30},
{104, 0x30},
{98, 0x30},
{110, 0x6},
{104, 0x6},
{98, 0x6},
{110, 0x5},
{104, 0x5},
{98, 0x5},
{110, 0x4},
{104, 0x4},
{98, 0x4},
{110, 0x3},
{104, 0x3},
{98, 0x3},
{110, 0x2},
{104, 0x2},
{98, 0x2},
{110, 0x1},
{104, 0x1},
{98, 0x1},
{110, 0x0},
{104, 0x0},
{98, 0x0},
{97, 0},
{96, 0},
{95, 0},
{94, 0},
{93, 0},
{92, 0},
{91, 0},
{90, 0},
{89, 0},
{88, 0},
{87, 0},
{86, 0},
{85, 0},
{84, 0},
{83, 0},
{82, 0},
{81, 0},
{80, 0},
{79, 0},
{78, 0},
{77, 0},
{76, 0},
{75, 0},
{74, 0},
{73, 0},
{72, 0},
{71, 0},
{70, 0},
{69, 0},
{68, 0},
{67, 0},
{66, 0},
{65, 0},
{64, 0},
{63, 0},
{62, 0},
{61, 0},
{60, 0},
{59, 0},
}
};
static int il4965_fill_txpower_tbl(struct il_priv *il, u8 band, u16 channel,
u8 is_ht40, u8 ctrl_chan_high,
struct il4965_tx_power_db *tx_power_tbl)
{
u8 saturation_power;
s32 target_power;
s32 user_target_power;
s32 power_limit;
s32 current_temp;
s32 reg_limit;
s32 current_regulatory;
s32 txatten_grp = CALIB_CH_GROUP_MAX;
int i;
int c;
const struct il_channel_info *ch_info = NULL;
struct il_eeprom_calib_ch_info ch_eeprom_info;
const struct il_eeprom_calib_measure *measurement;
s16 voltage;
s32 init_voltage;
s32 voltage_compensation;
s32 degrees_per_05db_num;
s32 degrees_per_05db_denom;
s32 factory_temp;
s32 temperature_comp[2];
s32 factory_gain_idx[2];
s32 factory_actual_pwr[2];
s32 power_idx;
/* tx_power_user_lmt is in dBm, convert to half-dBm (half-dB units
* are used for idxing into txpower table) */
user_target_power = 2 * il->tx_power_user_lmt;
/* Get current (RXON) channel, band, width */
D_TXPOWER("chan %d band %d is_ht40 %d\n", channel, band,
is_ht40);
ch_info = il_get_channel_info(il, il->band, channel);
if (!il_is_channel_valid(ch_info))
return -EINVAL;
/* get txatten group, used to select 1) thermal txpower adjustment
* and 2) mimo txpower balance between Tx chains. */
txatten_grp = il4965_get_tx_atten_grp(channel);
if (txatten_grp < 0) {
IL_ERR("Can't find txatten group for channel %d.\n",
channel);
return txatten_grp;
}
D_TXPOWER("channel %d belongs to txatten group %d\n",
channel, txatten_grp);
if (is_ht40) {
if (ctrl_chan_high)
channel -= 2;
else
channel += 2;
}
/* hardware txpower limits ...
* saturation (clipping distortion) txpowers are in half-dBm */
if (band)
saturation_power = il->calib_info->saturation_power24;
else
saturation_power = il->calib_info->saturation_power52;
if (saturation_power < IL_TX_POWER_SATURATION_MIN ||
saturation_power > IL_TX_POWER_SATURATION_MAX) {
if (band)
saturation_power = IL_TX_POWER_DEFAULT_SATURATION_24;
else
saturation_power = IL_TX_POWER_DEFAULT_SATURATION_52;
}
/* regulatory txpower limits ... reg_limit values are in half-dBm,
* max_power_avg values are in dBm, convert * 2 */
if (is_ht40)
reg_limit = ch_info->ht40_max_power_avg * 2;
else
reg_limit = ch_info->max_power_avg * 2;
if ((reg_limit < IL_TX_POWER_REGULATORY_MIN) ||
(reg_limit > IL_TX_POWER_REGULATORY_MAX)) {
if (band)
reg_limit = IL_TX_POWER_DEFAULT_REGULATORY_24;
else
reg_limit = IL_TX_POWER_DEFAULT_REGULATORY_52;
}
/* Interpolate txpower calibration values for this channel,
* based on factory calibration tests on spaced channels. */
il4965_interpolate_chan(il, channel, &ch_eeprom_info);
/* calculate tx gain adjustment based on power supply voltage */
voltage = le16_to_cpu(il->calib_info->voltage);
init_voltage = (s32)le32_to_cpu(il->card_alive_init.voltage);
voltage_compensation =
il4965_get_voltage_compensation(voltage, init_voltage);
D_TXPOWER("curr volt %d eeprom volt %d volt comp %d\n",
init_voltage,
voltage, voltage_compensation);
/* get current temperature (Celsius) */
current_temp = max(il->temperature, IL_TX_POWER_TEMPERATURE_MIN);
current_temp = min(il->temperature, IL_TX_POWER_TEMPERATURE_MAX);
current_temp = KELVIN_TO_CELSIUS(current_temp);
/* select thermal txpower adjustment params, based on channel group
* (same frequency group used for mimo txatten adjustment) */
degrees_per_05db_num =
tx_power_cmp_tble[txatten_grp].degrees_per_05db_a;
degrees_per_05db_denom =
tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom;
/* get per-chain txpower values from factory measurements */
for (c = 0; c < 2; c++) {
measurement = &ch_eeprom_info.measurements[c][1];
/* txgain adjustment (in half-dB steps) based on difference
* between factory and current temperature */
factory_temp = measurement->temperature;
il4965_math_div_round((current_temp - factory_temp) *
degrees_per_05db_denom,
degrees_per_05db_num,
&temperature_comp[c]);
factory_gain_idx[c] = measurement->gain_idx;
factory_actual_pwr[c] = measurement->actual_pow;
D_TXPOWER("chain = %d\n", c);
D_TXPOWER("fctry tmp %d, "
"curr tmp %d, comp %d steps\n",
factory_temp, current_temp,
temperature_comp[c]);
D_TXPOWER("fctry idx %d, fctry pwr %d\n",
factory_gain_idx[c],
factory_actual_pwr[c]);
}
/* for each of 33 bit-rates (including 1 for CCK) */
for (i = 0; i < POWER_TBL_NUM_ENTRIES; i++) {
u8 is_mimo_rate;
union il4965_tx_power_dual_stream tx_power;
/* for mimo, reduce each chain's txpower by half
* (3dB, 6 steps), so total output power is regulatory
* compliant. */
if (i & 0x8) {
current_regulatory = reg_limit -
IL_TX_POWER_MIMO_REGULATORY_COMPENSATION;
is_mimo_rate = 1;
} else {
current_regulatory = reg_limit;
is_mimo_rate = 0;
}
/* find txpower limit, either hardware or regulatory */
power_limit = saturation_power - back_off_table[i];
if (power_limit > current_regulatory)
power_limit = current_regulatory;
/* reduce user's txpower request if necessary
* for this rate on this channel */
target_power = user_target_power;
if (target_power > power_limit)
target_power = power_limit;
D_TXPOWER("rate %d sat %d reg %d usr %d tgt %d\n",
i, saturation_power - back_off_table[i],
current_regulatory, user_target_power,
target_power);
/* for each of 2 Tx chains (radio transmitters) */
for (c = 0; c < 2; c++) {
s32 atten_value;
if (is_mimo_rate)
atten_value =
(s32)le32_to_cpu(il->card_alive_init.
tx_atten[txatten_grp][c]);
else
atten_value = 0;
/* calculate idx; higher idx means lower txpower */
power_idx = (u8) (factory_gain_idx[c] -
(target_power -
factory_actual_pwr[c]) -
temperature_comp[c] -
voltage_compensation +
atten_value);
/* D_TXPOWER("calculated txpower idx %d\n",
power_idx); */
if (power_idx < get_min_power_idx(i, band))
power_idx = get_min_power_idx(i, band);
/* adjust 5 GHz idx to support negative idxes */
if (!band)
power_idx += 9;
/* CCK, rate 32, reduce txpower for CCK */
if (i == POWER_TBL_CCK_ENTRY)
power_idx +=
IL_TX_POWER_CCK_COMPENSATION_C_STEP;
/* stay within the table! */
if (power_idx > 107) {
IL_WARN("txpower idx %d > 107\n",
power_idx);
power_idx = 107;
}
if (power_idx < 0) {
IL_WARN("txpower idx %d < 0\n",
power_idx);
power_idx = 0;
}
/* fill txpower command for this rate/chain */
tx_power.s.radio_tx_gain[c] =
gain_table[band][power_idx].radio;
tx_power.s.dsp_predis_atten[c] =
gain_table[band][power_idx].dsp;
D_TXPOWER("chain %d mimo %d idx %d "
"gain 0x%02x dsp %d\n",
c, atten_value, power_idx,
tx_power.s.radio_tx_gain[c],
tx_power.s.dsp_predis_atten[c]);
} /* for each chain */
tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw);
} /* for each rate */
return 0;
}
/**
* il4965_send_tx_power - Configure the TXPOWER level user limit
*
* Uses the active RXON for channel, band, and characteristics (ht40, high)
* The power limit is taken from il->tx_power_user_lmt.
*/
static int il4965_send_tx_power(struct il_priv *il)
{
struct il4965_txpowertable_cmd cmd = { 0 };
int ret;
u8 band = 0;
bool is_ht40 = false;
u8 ctrl_chan_high = 0;
struct il_rxon_context *ctx = &il->ctx;
if (WARN_ONCE(test_bit(S_SCAN_HW, &il->status),
"TX Power requested while scanning!\n"))
return -EAGAIN;
band = il->band == IEEE80211_BAND_2GHZ;
is_ht40 = iw4965_is_ht40_channel(ctx->active.flags);
if (is_ht40 && (ctx->active.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
ctrl_chan_high = 1;
cmd.band = band;
cmd.channel = ctx->active.channel;
ret = il4965_fill_txpower_tbl(il, band,
le16_to_cpu(ctx->active.channel),
is_ht40, ctrl_chan_high, &cmd.tx_power);
if (ret)
goto out;
ret = il_send_cmd_pdu(il,
C_TX_PWR_TBL, sizeof(cmd), &cmd);
out:
return ret;
}
static int il4965_send_rxon_assoc(struct il_priv *il,
struct il_rxon_context *ctx)
{
int ret = 0;
struct il4965_rxon_assoc_cmd rxon_assoc;
const struct il_rxon_cmd *rxon1 = &ctx->staging;
const struct il_rxon_cmd *rxon2 = &ctx->active;
if (rxon1->flags == rxon2->flags &&
rxon1->filter_flags == rxon2->filter_flags &&
rxon1->cck_basic_rates == rxon2->cck_basic_rates &&
rxon1->ofdm_ht_single_stream_basic_rates ==
rxon2->ofdm_ht_single_stream_basic_rates &&
rxon1->ofdm_ht_dual_stream_basic_rates ==
rxon2->ofdm_ht_dual_stream_basic_rates &&
rxon1->rx_chain == rxon2->rx_chain &&
rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates) {
D_INFO("Using current RXON_ASSOC. Not resending.\n");
return 0;
}
rxon_assoc.flags = ctx->staging.flags;
rxon_assoc.filter_flags = ctx->staging.filter_flags;
rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
rxon_assoc.reserved = 0;
rxon_assoc.ofdm_ht_single_stream_basic_rates =
ctx->staging.ofdm_ht_single_stream_basic_rates;
rxon_assoc.ofdm_ht_dual_stream_basic_rates =
ctx->staging.ofdm_ht_dual_stream_basic_rates;
rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain;
ret = il_send_cmd_pdu_async(il, C_RXON_ASSOC,
sizeof(rxon_assoc), &rxon_assoc, NULL);
return ret;
}
static int il4965_commit_rxon(struct il_priv *il, struct il_rxon_context *ctx)
{
/* cast away the const for active_rxon in this function */
struct il_rxon_cmd *active_rxon = (void *)&ctx->active;
int ret;
bool new_assoc =
!!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK);
if (!il_is_alive(il))
return -EBUSY;
if (!ctx->is_active)
return 0;
/* always get timestamp with Rx frame */
ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK;
ret = il_check_rxon_cmd(il, ctx);
if (ret) {
IL_ERR("Invalid RXON configuration. Not committing.\n");
return -EINVAL;
}
/*
* receive commit_rxon request
* abort any previous channel switch if still in process
*/
if (test_bit(S_CHANNEL_SWITCH_PENDING, &il->status) &&
il->switch_channel != ctx->staging.channel) {
D_11H("abort channel switch on %d\n",
le16_to_cpu(il->switch_channel));
il_chswitch_done(il, false);
}
/* If we don't need to send a full RXON, we can use
* il_rxon_assoc_cmd which is used to reconfigure filter
* and other flags for the current radio configuration. */
if (!il_full_rxon_required(il, ctx)) {
ret = il_send_rxon_assoc(il, ctx);
if (ret) {
IL_ERR("Error setting RXON_ASSOC (%d)\n", ret);
return ret;
}
memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
il_print_rx_config_cmd(il, ctx);
/*
* We do not commit tx power settings while channel changing,
* do it now if tx power changed.
*/
il_set_tx_power(il, il->tx_power_next, false);
return 0;
}
/* If we are currently associated and the new config requires
* an RXON_ASSOC and the new config wants the associated mask enabled,
* we must clear the associated from the active configuration
* before we apply the new config */
if (il_is_associated_ctx(ctx) && new_assoc) {
D_INFO("Toggling associated bit on current RXON\n");
active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
ret = il_send_cmd_pdu(il, ctx->rxon_cmd,
sizeof(struct il_rxon_cmd),
active_rxon);
/* If the mask clearing failed then we set
* active_rxon back to what it was previously */
if (ret) {
active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
IL_ERR("Error clearing ASSOC_MSK (%d)\n", ret);
return ret;
}
il_clear_ucode_stations(il, ctx);
il_restore_stations(il, ctx);
ret = il4965_restore_default_wep_keys(il, ctx);
if (ret) {
IL_ERR("Failed to restore WEP keys (%d)\n", ret);
return ret;
}
}
D_INFO("Sending RXON\n"
"* with%s RXON_FILTER_ASSOC_MSK\n"
"* channel = %d\n"
"* bssid = %pM\n",
(new_assoc ? "" : "out"),
le16_to_cpu(ctx->staging.channel),
ctx->staging.bssid_addr);
il_set_rxon_hwcrypto(il, ctx,
!il->cfg->mod_params->sw_crypto);
/* Apply the new configuration
* RXON unassoc clears the station table in uCode so restoration of
* stations is needed after it (the RXON command) completes
*/
if (!new_assoc) {
ret = il_send_cmd_pdu(il, ctx->rxon_cmd,
sizeof(struct il_rxon_cmd), &ctx->staging);
if (ret) {
IL_ERR("Error setting new RXON (%d)\n", ret);
return ret;
}
D_INFO("Return from !new_assoc RXON.\n");
memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
il_clear_ucode_stations(il, ctx);
il_restore_stations(il, ctx);
ret = il4965_restore_default_wep_keys(il, ctx);
if (ret) {
IL_ERR("Failed to restore WEP keys (%d)\n", ret);
return ret;
}
}
if (new_assoc) {
il->start_calib = 0;
/* Apply the new configuration
* RXON assoc doesn't clear the station table in uCode,
*/
ret = il_send_cmd_pdu(il, ctx->rxon_cmd,
sizeof(struct il_rxon_cmd), &ctx->staging);
if (ret) {
IL_ERR("Error setting new RXON (%d)\n", ret);
return ret;
}
memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
}
il_print_rx_config_cmd(il, ctx);
il4965_init_sensitivity(il);
/* If we issue a new RXON command which required a tune then we must
* send a new TXPOWER command or we won't be able to Tx any frames */
ret = il_set_tx_power(il, il->tx_power_next, true);
if (ret) {
IL_ERR("Error sending TX power (%d)\n", ret);
return ret;
}
return 0;
}
static int il4965_hw_channel_switch(struct il_priv *il,
struct ieee80211_channel_switch *ch_switch)
{
struct il_rxon_context *ctx = &il->ctx;
int rc;
u8 band = 0;
bool is_ht40 = false;
u8 ctrl_chan_high = 0;
struct il4965_channel_switch_cmd cmd;
const struct il_channel_info *ch_info;
u32 switch_time_in_usec, ucode_switch_time;
u16 ch;
u32 tsf_low;
u8 switch_count;
u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
struct ieee80211_vif *vif = ctx->vif;
band = il->band == IEEE80211_BAND_2GHZ;
is_ht40 = iw4965_is_ht40_channel(ctx->staging.flags);
if (is_ht40 &&
(ctx->staging.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
ctrl_chan_high = 1;
cmd.band = band;
cmd.expect_beacon = 0;
ch = ch_switch->channel->hw_value;
cmd.channel = cpu_to_le16(ch);
cmd.rxon_flags = ctx->staging.flags;
cmd.rxon_filter_flags = ctx->staging.filter_flags;
switch_count = ch_switch->count;
tsf_low = ch_switch->timestamp & 0x0ffffffff;
/*
* calculate the ucode channel switch time
* adding TSF as one of the factor for when to switch
*/
if (il->ucode_beacon_time > tsf_low && beacon_interval) {
if (switch_count > ((il->ucode_beacon_time - tsf_low) /
beacon_interval)) {
switch_count -= (il->ucode_beacon_time -
tsf_low) / beacon_interval;
} else
switch_count = 0;
}
if (switch_count <= 1)
cmd.switch_time = cpu_to_le32(il->ucode_beacon_time);
else {
switch_time_in_usec =
vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
ucode_switch_time = il_usecs_to_beacons(il,
switch_time_in_usec,
beacon_interval);
cmd.switch_time = il_add_beacon_time(il,
il->ucode_beacon_time,
ucode_switch_time,
beacon_interval);
}
D_11H("uCode time for the switch is 0x%x\n",
cmd.switch_time);
ch_info = il_get_channel_info(il, il->band, ch);
if (ch_info)
cmd.expect_beacon = il_is_channel_radar(ch_info);
else {
IL_ERR("invalid channel switch from %u to %u\n",
ctx->active.channel, ch);
return -EFAULT;
}
rc = il4965_fill_txpower_tbl(il, band, ch, is_ht40,
ctrl_chan_high, &cmd.tx_power);
if (rc) {
D_11H("error:%d fill txpower_tbl\n", rc);
return rc;
}
return il_send_cmd_pdu(il,
C_CHANNEL_SWITCH, sizeof(cmd), &cmd);
}
/**
* il4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
*/
static void il4965_txq_update_byte_cnt_tbl(struct il_priv *il,
struct il_tx_queue *txq,
u16 byte_cnt)
{
struct il4965_scd_bc_tbl *scd_bc_tbl = il->scd_bc_tbls.addr;
int txq_id = txq->q.id;
int write_ptr = txq->q.write_ptr;
int len = byte_cnt + IL_TX_CRC_SIZE + IL_TX_DELIMITER_SIZE;
__le16 bc_ent;
WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX);
bc_ent = cpu_to_le16(len & 0xFFF);
/* Set up byte count within first 256 entries */
scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent;
/* If within first 64 entries, duplicate at end */
if (write_ptr < TFD_QUEUE_SIZE_BC_DUP)
scd_bc_tbl[txq_id].
tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent;
}
/**
* il4965_hw_get_temperature - return the calibrated temperature (in Kelvin)
* @stats: Provides the temperature reading from the uCode
*
* A return of <0 indicates bogus data in the stats
*/
static int il4965_hw_get_temperature(struct il_priv *il)
{
s32 temperature;
s32 vt;
s32 R1, R2, R3;
u32 R4;
if (test_bit(S_TEMPERATURE, &il->status) &&
(il->_4965.stats.flag &
STATS_REPLY_FLG_HT40_MODE_MSK)) {
D_TEMP("Running HT40 temperature calibration\n");
R1 = (s32)le32_to_cpu(il->card_alive_init.therm_r1[1]);
R2 = (s32)le32_to_cpu(il->card_alive_init.therm_r2[1]);
R3 = (s32)le32_to_cpu(il->card_alive_init.therm_r3[1]);
R4 = le32_to_cpu(il->card_alive_init.therm_r4[1]);
} else {
D_TEMP("Running temperature calibration\n");
R1 = (s32)le32_to_cpu(il->card_alive_init.therm_r1[0]);
R2 = (s32)le32_to_cpu(il->card_alive_init.therm_r2[0]);
R3 = (s32)le32_to_cpu(il->card_alive_init.therm_r3[0]);
R4 = le32_to_cpu(il->card_alive_init.therm_r4[0]);
}
/*
* Temperature is only 23 bits, so sign extend out to 32.
*
* NOTE If we haven't received a stats notification yet
* with an updated temperature, use R4 provided to us in the
* "initialize" ALIVE response.
*/
if (!test_bit(S_TEMPERATURE, &il->status))
vt = sign_extend32(R4, 23);
else
vt = sign_extend32(le32_to_cpu(il->_4965.stats.
general.common.temperature), 23);
D_TEMP("Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt);
if (R3 == R1) {
IL_ERR("Calibration conflict R1 == R3\n");
return -1;
}
/* Calculate temperature in degrees Kelvin, adjust by 97%.
* Add offset to center the adjustment around 0 degrees Centigrade. */
temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2);
temperature /= (R3 - R1);
temperature = (temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET;
D_TEMP("Calibrated temperature: %dK, %dC\n",
temperature, KELVIN_TO_CELSIUS(temperature));
return temperature;
}
/* Adjust Txpower only if temperature variance is greater than threshold. */
#define IL_TEMPERATURE_THRESHOLD 3
/**
* il4965_is_temp_calib_needed - determines if new calibration is needed
*
* If the temperature changed has changed sufficiently, then a recalibration
* is needed.
*
* Assumes caller will replace il->last_temperature once calibration
* executed.
*/
static int il4965_is_temp_calib_needed(struct il_priv *il)
{
int temp_diff;
if (!test_bit(S_STATS, &il->status)) {
D_TEMP("Temperature not updated -- no stats.\n");
return 0;
}
temp_diff = il->temperature - il->last_temperature;
/* get absolute value */
if (temp_diff < 0) {
D_POWER("Getting cooler, delta %d\n", temp_diff);
temp_diff = -temp_diff;
} else if (temp_diff == 0)
D_POWER("Temperature unchanged\n");
else
D_POWER("Getting warmer, delta %d\n", temp_diff);
if (temp_diff < IL_TEMPERATURE_THRESHOLD) {
D_POWER(" => thermal txpower calib not needed\n");
return 0;
}
D_POWER(" => thermal txpower calib needed\n");
return 1;
}
static void il4965_temperature_calib(struct il_priv *il)
{
s32 temp;
temp = il4965_hw_get_temperature(il);
if (IL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(temp))
return;
if (il->temperature != temp) {
if (il->temperature)
D_TEMP("Temperature changed "
"from %dC to %dC\n",
KELVIN_TO_CELSIUS(il->temperature),
KELVIN_TO_CELSIUS(temp));
else
D_TEMP("Temperature "
"initialized to %dC\n",
KELVIN_TO_CELSIUS(temp));
}
il->temperature = temp;
set_bit(S_TEMPERATURE, &il->status);
if (!il->disable_tx_power_cal &&
unlikely(!test_bit(S_SCANNING, &il->status)) &&
il4965_is_temp_calib_needed(il))
queue_work(il->workqueue, &il->txpower_work);
}
static u16 il4965_get_hcmd_size(u8 cmd_id, u16 len)
{
switch (cmd_id) {
case C_RXON:
return (u16) sizeof(struct il4965_rxon_cmd);
default:
return len;
}
}
static u16 il4965_build_addsta_hcmd(const struct il_addsta_cmd *cmd,
u8 *data)
{
struct il4965_addsta_cmd *addsta = (struct il4965_addsta_cmd *)data;
addsta->mode = cmd->mode;
memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
memcpy(&addsta->key, &cmd->key, sizeof(struct il4965_keyinfo));
addsta->station_flags = cmd->station_flags;
addsta->station_flags_msk = cmd->station_flags_msk;
addsta->tid_disable_tx = cmd->tid_disable_tx;
addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
addsta->sleep_tx_count = cmd->sleep_tx_count;
addsta->reserved1 = cpu_to_le16(0);
addsta->reserved2 = cpu_to_le16(0);
return (u16)sizeof(struct il4965_addsta_cmd);
}
static inline u32 il4965_get_scd_ssn(struct il4965_tx_resp *tx_resp)
{
return le32_to_cpup(&tx_resp->u.status + tx_resp->frame_count) & MAX_SN;
}
static inline u32 il4965_tx_status_to_mac80211(u32 status)
{
status &= TX_STATUS_MSK;
switch (status) {
case TX_STATUS_SUCCESS:
case TX_STATUS_DIRECT_DONE:
return IEEE80211_TX_STAT_ACK;
case TX_STATUS_FAIL_DEST_PS:
return IEEE80211_TX_STAT_TX_FILTERED;
default:
return 0;
}
}
static inline bool il4965_is_tx_success(u32 status)
{
status &= TX_STATUS_MSK;
return (status == TX_STATUS_SUCCESS ||
status == TX_STATUS_DIRECT_DONE);
}
/**
* il4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue
*/
static int il4965_tx_status_reply_tx(struct il_priv *il,
struct il_ht_agg *agg,
struct il4965_tx_resp *tx_resp,
int txq_id, u16 start_idx)
{
u16 status;
struct agg_tx_status *frame_status = tx_resp->u.agg_status;
struct ieee80211_tx_info *info = NULL;
struct ieee80211_hdr *hdr = NULL;
u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
int i, sh, idx;
u16 seq;
if (agg->wait_for_ba)
D_TX_REPLY("got tx response w/o block-ack\n");
agg->frame_count = tx_resp->frame_count;
agg->start_idx = start_idx;
agg->rate_n_flags = rate_n_flags;
agg->bitmap = 0;
/* num frames attempted by Tx command */
if (agg->frame_count == 1) {
/* Only one frame was attempted; no block-ack will arrive */
status = le16_to_cpu(frame_status[0].status);
idx = start_idx;
D_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n",
agg->frame_count, agg->start_idx, idx);
info = IEEE80211_SKB_CB(il->txq[txq_id].txb[idx].skb);
info->status.rates[0].count = tx_resp->failure_frame + 1;
info->flags &= ~IEEE80211_TX_CTL_AMPDU;
info->flags |= il4965_tx_status_to_mac80211(status);
il4965_hwrate_to_tx_control(il, rate_n_flags, info);
D_TX_REPLY("1 Frame 0x%x failure :%d\n",
status & 0xff, tx_resp->failure_frame);
D_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags);
agg->wait_for_ba = 0;
} else {
/* Two or more frames were attempted; expect block-ack */
u64 bitmap = 0;
int start = agg->start_idx;
/* Construct bit-map of pending frames within Tx win */
for (i = 0; i < agg->frame_count; i++) {
u16 sc;
status = le16_to_cpu(frame_status[i].status);
seq = le16_to_cpu(frame_status[i].sequence);
idx = SEQ_TO_IDX(seq);
txq_id = SEQ_TO_QUEUE(seq);
if (status & (AGG_TX_STATE_FEW_BYTES_MSK |
AGG_TX_STATE_ABORT_MSK))
continue;
D_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n",
agg->frame_count, txq_id, idx);
hdr = il_tx_queue_get_hdr(il, txq_id, idx);
if (!hdr) {
IL_ERR(
"BUG_ON idx doesn't point to valid skb"
" idx=%d, txq_id=%d\n", idx, txq_id);
return -1;
}
sc = le16_to_cpu(hdr->seq_ctrl);
if (idx != (SEQ_TO_SN(sc) & 0xff)) {
IL_ERR(
"BUG_ON idx doesn't match seq control"
" idx=%d, seq_idx=%d, seq=%d\n",
idx, SEQ_TO_SN(sc), hdr->seq_ctrl);
return -1;
}
D_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n",
i, idx, SEQ_TO_SN(sc));
sh = idx - start;
if (sh > 64) {
sh = (start - idx) + 0xff;
bitmap = bitmap << sh;
sh = 0;
start = idx;
} else if (sh < -64)
sh = 0xff - (start - idx);
else if (sh < 0) {
sh = start - idx;
start = idx;
bitmap = bitmap << sh;
sh = 0;
}
bitmap |= 1ULL << sh;
D_TX_REPLY("start=%d bitmap=0x%llx\n",
start, (unsigned long long)bitmap);
}
agg->bitmap = bitmap;
agg->start_idx = start;
D_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n",
agg->frame_count, agg->start_idx,
(unsigned long long)agg->bitmap);
if (bitmap)
agg->wait_for_ba = 1;
}
return 0;
}
static u8 il4965_find_station(struct il_priv *il, const u8 *addr)
{
int i;
int start = 0;
int ret = IL_INVALID_STATION;
unsigned long flags;
if ((il->iw_mode == NL80211_IFTYPE_ADHOC))
start = IL_STA_ID;
if (is_broadcast_ether_addr(addr))
return il->ctx.bcast_sta_id;
spin_lock_irqsave(&il->sta_lock, flags);
for (i = start; i < il->hw_params.max_stations; i++)
if (il->stations[i].used &&
(!compare_ether_addr(il->stations[i].sta.sta.addr,
addr))) {
ret = i;
goto out;
}
D_ASSOC("can not find STA %pM total %d\n",
addr, il->num_stations);
out:
/*
* It may be possible that more commands interacting with stations
* arrive before we completed processing the adding of
* station
*/
if (ret != IL_INVALID_STATION &&
(!(il->stations[ret].used & IL_STA_UCODE_ACTIVE) ||
((il->stations[ret].used & IL_STA_UCODE_ACTIVE) &&
(il->stations[ret].used & IL_STA_UCODE_INPROGRESS)))) {
IL_ERR("Requested station info for sta %d before ready.\n",
ret);
ret = IL_INVALID_STATION;
}
spin_unlock_irqrestore(&il->sta_lock, flags);
return ret;
}
static int il4965_get_ra_sta_id(struct il_priv *il, struct ieee80211_hdr *hdr)
{
if (il->iw_mode == NL80211_IFTYPE_STATION) {
return IL_AP_ID;
} else {
u8 *da = ieee80211_get_DA(hdr);
return il4965_find_station(il, da);
}
}
/**
* il4965_hdl_tx - Handle standard (non-aggregation) Tx response
*/
static void il4965_hdl_tx(struct il_priv *il,
struct il_rx_buf *rxb)
{
struct il_rx_pkt *pkt = rxb_addr(rxb);
u16 sequence = le16_to_cpu(pkt->hdr.sequence);
int txq_id = SEQ_TO_QUEUE(sequence);
int idx = SEQ_TO_IDX(sequence);
struct il_tx_queue *txq = &il->txq[txq_id];
struct ieee80211_hdr *hdr;
struct ieee80211_tx_info *info;
struct il4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
u32 status = le32_to_cpu(tx_resp->u.status);
int uninitialized_var(tid);
int sta_id;
int freed;
u8 *qc = NULL;
unsigned long flags;
if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) {
IL_ERR("Read idx for DMA queue txq_id (%d) idx %d "
"is out of range [0-%d] %d %d\n", txq_id,
idx, txq->q.n_bd, txq->q.write_ptr,
txq->q.read_ptr);
return;
}
txq->time_stamp = jiffies;
info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
memset(&info->status, 0, sizeof(info->status));
hdr = il_tx_queue_get_hdr(il, txq_id, idx);
if (ieee80211_is_data_qos(hdr->frame_control)) {
qc = ieee80211_get_qos_ctl(hdr);
tid = qc[0] & 0xf;
}
sta_id = il4965_get_ra_sta_id(il, hdr);
if (txq->sched_retry && unlikely(sta_id == IL_INVALID_STATION)) {
IL_ERR("Station not known\n");
return;
}
spin_lock_irqsave(&il->sta_lock, flags);
if (txq->sched_retry) {
const u32 scd_ssn = il4965_get_scd_ssn(tx_resp);
struct il_ht_agg *agg = NULL;
WARN_ON(!qc);
agg = &il->stations[sta_id].tid[tid].agg;
il4965_tx_status_reply_tx(il, agg, tx_resp, txq_id, idx);
/* check if BAR is needed */
if ((tx_resp->frame_count == 1) && !il4965_is_tx_success(status))
info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
if (txq->q.read_ptr != (scd_ssn & 0xff)) {
idx = il_queue_dec_wrap(scd_ssn & 0xff,
txq->q.n_bd);
D_TX_REPLY("Retry scheduler reclaim scd_ssn "
"%d idx %d\n", scd_ssn , idx);
freed = il4965_tx_queue_reclaim(il, txq_id, idx);
if (qc)
il4965_free_tfds_in_queue(il, sta_id,
tid, freed);
if (il->mac80211_registered &&
il_queue_space(&txq->q) > txq->q.low_mark &&
agg->state != IL_EMPTYING_HW_QUEUE_DELBA)
il_wake_queue(il, txq);
}
} else {
info->status.rates[0].count = tx_resp->failure_frame + 1;
info->flags |= il4965_tx_status_to_mac80211(status);
il4965_hwrate_to_tx_control(il,
le32_to_cpu(tx_resp->rate_n_flags),
info);
D_TX_REPLY("TXQ %d status %s (0x%08x) "
"rate_n_flags 0x%x retries %d\n",
txq_id,
il4965_get_tx_fail_reason(status), status,
le32_to_cpu(tx_resp->rate_n_flags),
tx_resp->failure_frame);
freed = il4965_tx_queue_reclaim(il, txq_id, idx);
if (qc && likely(sta_id != IL_INVALID_STATION))
il4965_free_tfds_in_queue(il, sta_id, tid, freed);
else if (sta_id == IL_INVALID_STATION)
D_TX_REPLY("Station not known\n");
if (il->mac80211_registered &&
il_queue_space(&txq->q) > txq->q.low_mark)
il_wake_queue(il, txq);
}
if (qc && likely(sta_id != IL_INVALID_STATION))
il4965_txq_check_empty(il, sta_id, tid, txq_id);
il4965_check_abort_status(il, tx_resp->frame_count, status);
spin_unlock_irqrestore(&il->sta_lock, flags);
}
static void il4965_hdl_beacon(struct il_priv *il,
struct il_rx_buf *rxb)
{
struct il_rx_pkt *pkt = rxb_addr(rxb);
struct il4965_beacon_notif *beacon = (void *)pkt->u.raw;
u8 rate __maybe_unused =
il4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
D_RX("beacon status %#x, retries:%d ibssmgr:%d "
"tsf:0x%.8x%.8x rate:%d\n",
le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
beacon->beacon_notify_hdr.failure_frame,
le32_to_cpu(beacon->ibss_mgr_status),
le32_to_cpu(beacon->high_tsf),
le32_to_cpu(beacon->low_tsf), rate);
il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
}
/* Set up 4965-specific Rx frame reply handlers */
static void il4965_handler_setup(struct il_priv *il)
{
/* Legacy Rx frames */
il->handlers[N_RX] = il4965_hdl_rx;
/* Tx response */
il->handlers[C_TX] = il4965_hdl_tx;
il->handlers[N_BEACON] = il4965_hdl_beacon;
}
static struct il_hcmd_ops il4965_hcmd = {
.rxon_assoc = il4965_send_rxon_assoc,
.commit_rxon = il4965_commit_rxon,
.set_rxon_chain = il4965_set_rxon_chain,
};
static void il4965_post_scan(struct il_priv *il)
{
struct il_rxon_context *ctx = &il->ctx;
/*
* Since setting the RXON may have been deferred while
* performing the scan, fire one off if needed
*/
if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
il_commit_rxon(il, ctx);
}
static void il4965_post_associate(struct il_priv *il)
{
struct il_rxon_context *ctx = &il->ctx;
struct ieee80211_vif *vif = ctx->vif;
struct ieee80211_conf *conf = NULL;
int ret = 0;
if (!vif || !il->is_open)
return;
if (test_bit(S_EXIT_PENDING, &il->status))
return;
il_scan_cancel_timeout(il, 200);
conf = &il->hw->conf;
ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
il_commit_rxon(il, ctx);
ret = il_send_rxon_timing(il, ctx);
if (ret)
IL_WARN("RXON timing - "
"Attempting to continue.\n");
ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
il_set_rxon_ht(il, &il->current_ht_config);
if (il->cfg->ops->hcmd->set_rxon_chain)
il->cfg->ops->hcmd->set_rxon_chain(il, ctx);
ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
D_ASSOC("assoc id %d beacon interval %d\n",
vif->bss_conf.aid, vif->bss_conf.beacon_int);
if (vif->bss_conf.use_short_preamble)
ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
else
ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
if (vif->bss_conf.use_short_slot)
ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
else
ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
}
il_commit_rxon(il, ctx);
D_ASSOC("Associated as %d to: %pM\n",
vif->bss_conf.aid, ctx->active.bssid_addr);
switch (vif->type) {
case NL80211_IFTYPE_STATION:
break;
case NL80211_IFTYPE_ADHOC:
il4965_send_beacon_cmd(il);
break;
default:
IL_ERR("%s Should not be called in %d mode\n",
__func__, vif->type);
break;
}
/* the chain noise calibration will enabled PM upon completion
* If chain noise has already been run, then we need to enable
* power management here */
if (il->chain_noise_data.state == IL_CHAIN_NOISE_DONE)
il_power_update_mode(il, false);
/* Enable Rx differential gain and sensitivity calibrations */
il4965_chain_noise_reset(il);
il->start_calib = 1;
}
static void il4965_config_ap(struct il_priv *il)
{
struct il_rxon_context *ctx = &il->ctx;
struct ieee80211_vif *vif = ctx->vif;
int ret = 0;
lockdep_assert_held(&il->mutex);
if (test_bit(S_EXIT_PENDING, &il->status))
return;
/* The following should be done only at AP bring up */
if (!il_is_associated_ctx(ctx)) {
/* RXON - unassoc (to set timing command) */
ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
il_commit_rxon(il, ctx);
/* RXON Timing */
ret = il_send_rxon_timing(il, ctx);
if (ret)
IL_WARN("RXON timing failed - "
"Attempting to continue.\n");
/* AP has all antennas */
il->chain_noise_data.active_chains =
il->hw_params.valid_rx_ant;
il_set_rxon_ht(il, &il->current_ht_config);
if (il->cfg->ops->hcmd->set_rxon_chain)
il->cfg->ops->hcmd->set_rxon_chain(il, ctx);
ctx->staging.assoc_id = 0;
if (vif->bss_conf.use_short_preamble)
ctx->staging.flags |=
RXON_FLG_SHORT_PREAMBLE_MSK;
else
ctx->staging.flags &=
~RXON_FLG_SHORT_PREAMBLE_MSK;
if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
if (vif->bss_conf.use_short_slot)
ctx->staging.flags |=
RXON_FLG_SHORT_SLOT_MSK;
else
ctx->staging.flags &=
~RXON_FLG_SHORT_SLOT_MSK;
}
/* need to send beacon cmd before committing assoc RXON! */
il4965_send_beacon_cmd(il);
/* restore RXON assoc */
ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
il_commit_rxon(il, ctx);
}
il4965_send_beacon_cmd(il);
}
static struct il_hcmd_utils_ops il4965_hcmd_utils = {
.get_hcmd_size = il4965_get_hcmd_size,
.build_addsta_hcmd = il4965_build_addsta_hcmd,
.request_scan = il4965_request_scan,
.post_scan = il4965_post_scan,
};
static struct il_lib_ops il4965_lib = {
.set_hw_params = il4965_hw_set_hw_params,
.txq_update_byte_cnt_tbl = il4965_txq_update_byte_cnt_tbl,
.txq_attach_buf_to_tfd = il4965_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = il4965_hw_txq_free_tfd,
.txq_init = il4965_hw_tx_queue_init,
.handler_setup = il4965_handler_setup,
.is_valid_rtc_data_addr = il4965_hw_valid_rtc_data_addr,
.init_alive_start = il4965_init_alive_start,
.load_ucode = il4965_load_bsm,
.dump_nic_error_log = il4965_dump_nic_error_log,
.dump_fh = il4965_dump_fh,
.set_channel_switch = il4965_hw_channel_switch,
.apm_ops = {
.init = il_apm_init,
.config = il4965_nic_config,
},
.eeprom_ops = {
.regulatory_bands = {
EEPROM_REGULATORY_BAND_1_CHANNELS,
EEPROM_REGULATORY_BAND_2_CHANNELS,
EEPROM_REGULATORY_BAND_3_CHANNELS,
EEPROM_REGULATORY_BAND_4_CHANNELS,
EEPROM_REGULATORY_BAND_5_CHANNELS,
EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS,
EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS
},
.acquire_semaphore = il4965_eeprom_acquire_semaphore,
.release_semaphore = il4965_eeprom_release_semaphore,
},
.send_tx_power = il4965_send_tx_power,
.update_chain_flags = il4965_update_chain_flags,
.temp_ops = {
.temperature = il4965_temperature_calib,
},
.debugfs_ops = {
.rx_stats_read = il4965_ucode_rx_stats_read,
.tx_stats_read = il4965_ucode_tx_stats_read,
.general_stats_read = il4965_ucode_general_stats_read,
},
};
static const struct il_legacy_ops il4965_legacy_ops = {
.post_associate = il4965_post_associate,
.config_ap = il4965_config_ap,
.manage_ibss_station = il4965_manage_ibss_station,
.update_bcast_stations = il4965_update_bcast_stations,
};
struct ieee80211_ops il4965_hw_ops = {
.tx = il4965_mac_tx,
.start = il4965_mac_start,
.stop = il4965_mac_stop,
.add_interface = il_mac_add_interface,
.remove_interface = il_mac_remove_interface,
.change_interface = il_mac_change_interface,
.config = il_mac_config,
.configure_filter = il4965_configure_filter,
.set_key = il4965_mac_set_key,
.update_tkip_key = il4965_mac_update_tkip_key,
.conf_tx = il_mac_conf_tx,
.reset_tsf = il_mac_reset_tsf,
.bss_info_changed = il_mac_bss_info_changed,
.ampdu_action = il4965_mac_ampdu_action,
.hw_scan = il_mac_hw_scan,
.sta_add = il4965_mac_sta_add,
.sta_remove = il_mac_sta_remove,
.channel_switch = il4965_mac_channel_switch,
.tx_last_beacon = il_mac_tx_last_beacon,
};
static const struct il_ops il4965_ops = {
.lib = &il4965_lib,
.hcmd = &il4965_hcmd,
.utils = &il4965_hcmd_utils,
.led = &il4965_led_ops,
.legacy = &il4965_legacy_ops,
.ieee80211_ops = &il4965_hw_ops,
};
static struct il_base_params il4965_base_params = {
.eeprom_size = IL4965_EEPROM_IMG_SIZE,
.num_of_queues = IL49_NUM_QUEUES,
.num_of_ampdu_queues = IL49_NUM_AMPDU_QUEUES,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = true,
.led_compensation = 61,
.chain_noise_num_beacons = IL4965_CAL_NUM_BEACONS,
.wd_timeout = IL_DEF_WD_TIMEOUT,
.temperature_kelvin = true,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
};
struct il_cfg il4965_cfg = {
.name = "Intel(R) Wireless WiFi Link 4965AGN",
.fw_name_pre = IL4965_FW_PRE,
.ucode_api_max = IL4965_UCODE_API_MAX,
.ucode_api_min = IL4965_UCODE_API_MIN,
.sku = IL_SKU_A|IL_SKU_G|IL_SKU_N,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_ABC,
.eeprom_ver = EEPROM_4965_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION,
.ops = &il4965_ops,
.mod_params = &il4965_mod_params,
.base_params = &il4965_base_params,
.led_mode = IL_LED_BLINK,
/*
* Force use of chains B and C for scan RX on 5 GHz band
* because the device has off-channel reception on chain A.
*/
.scan_rx_antennas[IEEE80211_BAND_5GHZ] = ANT_BC,
};
/* Module firmware */
MODULE_FIRMWARE(IL4965_MODULE_FIRMWARE(IL4965_UCODE_API_MAX));
Reference in New Issue View Git Blame Copy Permalink