mirror of https://gitee.com/openkylin/linux.git
523 lines
10 KiB
C
523 lines
10 KiB
C
/*
|
|
* net/dsa/mv88e6xxx.c - Marvell 88e6xxx switch chip support
|
|
* Copyright (c) 2008 Marvell Semiconductor
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/list.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/phy.h>
|
|
#include "dsa_priv.h"
|
|
#include "mv88e6xxx.h"
|
|
|
|
/*
|
|
* If the switch's ADDR[4:0] strap pins are strapped to zero, it will
|
|
* use all 32 SMI bus addresses on its SMI bus, and all switch registers
|
|
* will be directly accessible on some {device address,register address}
|
|
* pair. If the ADDR[4:0] pins are not strapped to zero, the switch
|
|
* will only respond to SMI transactions to that specific address, and
|
|
* an indirect addressing mechanism needs to be used to access its
|
|
* registers.
|
|
*/
|
|
static int mv88e6xxx_reg_wait_ready(struct mii_bus *bus, int sw_addr)
|
|
{
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < 16; i++) {
|
|
ret = mdiobus_read(bus, sw_addr, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if ((ret & 0x8000) == 0)
|
|
return 0;
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg)
|
|
{
|
|
int ret;
|
|
|
|
if (sw_addr == 0)
|
|
return mdiobus_read(bus, addr, reg);
|
|
|
|
/*
|
|
* Wait for the bus to become free.
|
|
*/
|
|
ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* Transmit the read command.
|
|
*/
|
|
ret = mdiobus_write(bus, sw_addr, 0, 0x9800 | (addr << 5) | reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* Wait for the read command to complete.
|
|
*/
|
|
ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* Read the data.
|
|
*/
|
|
ret = mdiobus_read(bus, sw_addr, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return ret & 0xffff;
|
|
}
|
|
|
|
int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg)
|
|
{
|
|
struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
|
|
int ret;
|
|
|
|
mutex_lock(&ps->smi_mutex);
|
|
ret = __mv88e6xxx_reg_read(ds->master_mii_bus,
|
|
ds->pd->sw_addr, addr, reg);
|
|
mutex_unlock(&ps->smi_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
|
|
int reg, u16 val)
|
|
{
|
|
int ret;
|
|
|
|
if (sw_addr == 0)
|
|
return mdiobus_write(bus, addr, reg, val);
|
|
|
|
/*
|
|
* Wait for the bus to become free.
|
|
*/
|
|
ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* Transmit the data to write.
|
|
*/
|
|
ret = mdiobus_write(bus, sw_addr, 1, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* Transmit the write command.
|
|
*/
|
|
ret = mdiobus_write(bus, sw_addr, 0, 0x9400 | (addr << 5) | reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* Wait for the write command to complete.
|
|
*/
|
|
ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
|
|
{
|
|
struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
|
|
int ret;
|
|
|
|
mutex_lock(&ps->smi_mutex);
|
|
ret = __mv88e6xxx_reg_write(ds->master_mii_bus,
|
|
ds->pd->sw_addr, addr, reg, val);
|
|
mutex_unlock(&ps->smi_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int mv88e6xxx_config_prio(struct dsa_switch *ds)
|
|
{
|
|
/*
|
|
* Configure the IP ToS mapping registers.
|
|
*/
|
|
REG_WRITE(REG_GLOBAL, 0x10, 0x0000);
|
|
REG_WRITE(REG_GLOBAL, 0x11, 0x0000);
|
|
REG_WRITE(REG_GLOBAL, 0x12, 0x5555);
|
|
REG_WRITE(REG_GLOBAL, 0x13, 0x5555);
|
|
REG_WRITE(REG_GLOBAL, 0x14, 0xaaaa);
|
|
REG_WRITE(REG_GLOBAL, 0x15, 0xaaaa);
|
|
REG_WRITE(REG_GLOBAL, 0x16, 0xffff);
|
|
REG_WRITE(REG_GLOBAL, 0x17, 0xffff);
|
|
|
|
/*
|
|
* Configure the IEEE 802.1p priority mapping register.
|
|
*/
|
|
REG_WRITE(REG_GLOBAL, 0x18, 0xfa41);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mv88e6xxx_set_addr_direct(struct dsa_switch *ds, u8 *addr)
|
|
{
|
|
REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
|
|
REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
|
|
REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr)
|
|
{
|
|
int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
int j;
|
|
|
|
/*
|
|
* Write the MAC address byte.
|
|
*/
|
|
REG_WRITE(REG_GLOBAL2, 0x0d, 0x8000 | (i << 8) | addr[i]);
|
|
|
|
/*
|
|
* Wait for the write to complete.
|
|
*/
|
|
for (j = 0; j < 16; j++) {
|
|
ret = REG_READ(REG_GLOBAL2, 0x0d);
|
|
if ((ret & 0x8000) == 0)
|
|
break;
|
|
}
|
|
if (j == 16)
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mv88e6xxx_phy_read(struct dsa_switch *ds, int addr, int regnum)
|
|
{
|
|
if (addr >= 0)
|
|
return mv88e6xxx_reg_read(ds, addr, regnum);
|
|
return 0xffff;
|
|
}
|
|
|
|
int mv88e6xxx_phy_write(struct dsa_switch *ds, int addr, int regnum, u16 val)
|
|
{
|
|
if (addr >= 0)
|
|
return mv88e6xxx_reg_write(ds, addr, regnum, val);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_DSA_MV88E6XXX_NEED_PPU
|
|
static int mv88e6xxx_ppu_disable(struct dsa_switch *ds)
|
|
{
|
|
int ret;
|
|
int i;
|
|
|
|
ret = REG_READ(REG_GLOBAL, 0x04);
|
|
REG_WRITE(REG_GLOBAL, 0x04, ret & ~0x4000);
|
|
|
|
for (i = 0; i < 1000; i++) {
|
|
ret = REG_READ(REG_GLOBAL, 0x00);
|
|
msleep(1);
|
|
if ((ret & 0xc000) != 0xc000)
|
|
return 0;
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int mv88e6xxx_ppu_enable(struct dsa_switch *ds)
|
|
{
|
|
int ret;
|
|
int i;
|
|
|
|
ret = REG_READ(REG_GLOBAL, 0x04);
|
|
REG_WRITE(REG_GLOBAL, 0x04, ret | 0x4000);
|
|
|
|
for (i = 0; i < 1000; i++) {
|
|
ret = REG_READ(REG_GLOBAL, 0x00);
|
|
msleep(1);
|
|
if ((ret & 0xc000) == 0xc000)
|
|
return 0;
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void mv88e6xxx_ppu_reenable_work(struct work_struct *ugly)
|
|
{
|
|
struct mv88e6xxx_priv_state *ps;
|
|
|
|
ps = container_of(ugly, struct mv88e6xxx_priv_state, ppu_work);
|
|
if (mutex_trylock(&ps->ppu_mutex)) {
|
|
struct dsa_switch *ds = ((struct dsa_switch *)ps) - 1;
|
|
|
|
if (mv88e6xxx_ppu_enable(ds) == 0)
|
|
ps->ppu_disabled = 0;
|
|
mutex_unlock(&ps->ppu_mutex);
|
|
}
|
|
}
|
|
|
|
static void mv88e6xxx_ppu_reenable_timer(unsigned long _ps)
|
|
{
|
|
struct mv88e6xxx_priv_state *ps = (void *)_ps;
|
|
|
|
schedule_work(&ps->ppu_work);
|
|
}
|
|
|
|
static int mv88e6xxx_ppu_access_get(struct dsa_switch *ds)
|
|
{
|
|
struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
|
|
int ret;
|
|
|
|
mutex_lock(&ps->ppu_mutex);
|
|
|
|
/*
|
|
* If the PHY polling unit is enabled, disable it so that
|
|
* we can access the PHY registers. If it was already
|
|
* disabled, cancel the timer that is going to re-enable
|
|
* it.
|
|
*/
|
|
if (!ps->ppu_disabled) {
|
|
ret = mv88e6xxx_ppu_disable(ds);
|
|
if (ret < 0) {
|
|
mutex_unlock(&ps->ppu_mutex);
|
|
return ret;
|
|
}
|
|
ps->ppu_disabled = 1;
|
|
} else {
|
|
del_timer(&ps->ppu_timer);
|
|
ret = 0;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void mv88e6xxx_ppu_access_put(struct dsa_switch *ds)
|
|
{
|
|
struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
|
|
|
|
/*
|
|
* Schedule a timer to re-enable the PHY polling unit.
|
|
*/
|
|
mod_timer(&ps->ppu_timer, jiffies + msecs_to_jiffies(10));
|
|
mutex_unlock(&ps->ppu_mutex);
|
|
}
|
|
|
|
void mv88e6xxx_ppu_state_init(struct dsa_switch *ds)
|
|
{
|
|
struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
|
|
|
|
mutex_init(&ps->ppu_mutex);
|
|
INIT_WORK(&ps->ppu_work, mv88e6xxx_ppu_reenable_work);
|
|
init_timer(&ps->ppu_timer);
|
|
ps->ppu_timer.data = (unsigned long)ps;
|
|
ps->ppu_timer.function = mv88e6xxx_ppu_reenable_timer;
|
|
}
|
|
|
|
int mv88e6xxx_phy_read_ppu(struct dsa_switch *ds, int addr, int regnum)
|
|
{
|
|
int ret;
|
|
|
|
ret = mv88e6xxx_ppu_access_get(ds);
|
|
if (ret >= 0) {
|
|
ret = mv88e6xxx_reg_read(ds, addr, regnum);
|
|
mv88e6xxx_ppu_access_put(ds);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int mv88e6xxx_phy_write_ppu(struct dsa_switch *ds, int addr,
|
|
int regnum, u16 val)
|
|
{
|
|
int ret;
|
|
|
|
ret = mv88e6xxx_ppu_access_get(ds);
|
|
if (ret >= 0) {
|
|
ret = mv88e6xxx_reg_write(ds, addr, regnum, val);
|
|
mv88e6xxx_ppu_access_put(ds);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
void mv88e6xxx_poll_link(struct dsa_switch *ds)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < DSA_MAX_PORTS; i++) {
|
|
struct net_device *dev;
|
|
int port_status;
|
|
int link;
|
|
int speed;
|
|
int duplex;
|
|
int fc;
|
|
|
|
dev = ds->ports[i];
|
|
if (dev == NULL)
|
|
continue;
|
|
|
|
link = 0;
|
|
if (dev->flags & IFF_UP) {
|
|
port_status = mv88e6xxx_reg_read(ds, REG_PORT(i), 0x00);
|
|
if (port_status < 0)
|
|
continue;
|
|
|
|
link = !!(port_status & 0x0800);
|
|
}
|
|
|
|
if (!link) {
|
|
if (netif_carrier_ok(dev)) {
|
|
printk(KERN_INFO "%s: link down\n", dev->name);
|
|
netif_carrier_off(dev);
|
|
}
|
|
continue;
|
|
}
|
|
|
|
switch (port_status & 0x0300) {
|
|
case 0x0000:
|
|
speed = 10;
|
|
break;
|
|
case 0x0100:
|
|
speed = 100;
|
|
break;
|
|
case 0x0200:
|
|
speed = 1000;
|
|
break;
|
|
default:
|
|
speed = -1;
|
|
break;
|
|
}
|
|
duplex = (port_status & 0x0400) ? 1 : 0;
|
|
fc = (port_status & 0x8000) ? 1 : 0;
|
|
|
|
if (!netif_carrier_ok(dev)) {
|
|
printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
|
|
"flow control %sabled\n", dev->name,
|
|
speed, duplex ? "full" : "half",
|
|
fc ? "en" : "dis");
|
|
netif_carrier_on(dev);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int mv88e6xxx_stats_wait(struct dsa_switch *ds)
|
|
{
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < 10; i++) {
|
|
ret = REG_READ(REG_GLOBAL2, 0x1d);
|
|
if ((ret & 0x8000) == 0)
|
|
return 0;
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int mv88e6xxx_stats_snapshot(struct dsa_switch *ds, int port)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* Snapshot the hardware statistics counters for this port.
|
|
*/
|
|
REG_WRITE(REG_GLOBAL, 0x1d, 0xdc00 | port);
|
|
|
|
/*
|
|
* Wait for the snapshotting to complete.
|
|
*/
|
|
ret = mv88e6xxx_stats_wait(ds);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mv88e6xxx_stats_read(struct dsa_switch *ds, int stat, u32 *val)
|
|
{
|
|
u32 _val;
|
|
int ret;
|
|
|
|
*val = 0;
|
|
|
|
ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, 0x1d, 0xcc00 | stat);
|
|
if (ret < 0)
|
|
return;
|
|
|
|
ret = mv88e6xxx_stats_wait(ds);
|
|
if (ret < 0)
|
|
return;
|
|
|
|
ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, 0x1e);
|
|
if (ret < 0)
|
|
return;
|
|
|
|
_val = ret << 16;
|
|
|
|
ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, 0x1f);
|
|
if (ret < 0)
|
|
return;
|
|
|
|
*val = _val | ret;
|
|
}
|
|
|
|
void mv88e6xxx_get_strings(struct dsa_switch *ds,
|
|
int nr_stats, struct mv88e6xxx_hw_stat *stats,
|
|
int port, uint8_t *data)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < nr_stats; i++) {
|
|
memcpy(data + i * ETH_GSTRING_LEN,
|
|
stats[i].string, ETH_GSTRING_LEN);
|
|
}
|
|
}
|
|
|
|
void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
|
|
int nr_stats, struct mv88e6xxx_hw_stat *stats,
|
|
int port, uint64_t *data)
|
|
{
|
|
struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
|
|
int ret;
|
|
int i;
|
|
|
|
mutex_lock(&ps->stats_mutex);
|
|
|
|
ret = mv88e6xxx_stats_snapshot(ds, port);
|
|
if (ret < 0) {
|
|
mutex_unlock(&ps->stats_mutex);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Read each of the counters.
|
|
*/
|
|
for (i = 0; i < nr_stats; i++) {
|
|
struct mv88e6xxx_hw_stat *s = stats + i;
|
|
u32 low;
|
|
u32 high;
|
|
|
|
mv88e6xxx_stats_read(ds, s->reg, &low);
|
|
if (s->sizeof_stat == 8)
|
|
mv88e6xxx_stats_read(ds, s->reg + 1, &high);
|
|
else
|
|
high = 0;
|
|
|
|
data[i] = (((u64)high) << 32) | low;
|
|
}
|
|
|
|
mutex_unlock(&ps->stats_mutex);
|
|
}
|