mirror of https://gitee.com/openkylin/linux.git
496 lines
11 KiB
C
496 lines
11 KiB
C
/*
|
|
* bonito board support
|
|
*
|
|
* Copyright (C) 2011 Renesas Solutions Corp.
|
|
* Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/pinctrl/machine.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/smsc911x.h>
|
|
#include <linux/videodev2.h>
|
|
#include <mach/common.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/hardware/cache-l2x0.h>
|
|
#include <mach/r8a7740.h>
|
|
#include <mach/irqs.h>
|
|
#include <video/sh_mobile_lcdc.h>
|
|
|
|
/*
|
|
* CS Address device note
|
|
*----------------------------------------------------------------
|
|
* 0 0x0000_0000 NOR Flash (64MB) SW12 : bit3 = OFF
|
|
* 2 0x0800_0000 ExtNOR (64MB) SW12 : bit3 = OFF
|
|
* 4 -
|
|
* 5A -
|
|
* 5B 0x1600_0000 SRAM (8MB)
|
|
* 6 0x1800_0000 FPGA (64K)
|
|
* 0x1801_0000 Ether (4KB)
|
|
* 0x1801_1000 USB (4KB)
|
|
*/
|
|
|
|
/*
|
|
* SW12
|
|
*
|
|
* bit1 bit2 bit3
|
|
*----------------------------------------------------------------------------
|
|
* ON NOR WriteProtect NAND WriteProtect CS0 ExtNOR / CS2 NOR
|
|
* OFF NOR Not WriteProtect NAND Not WriteProtect CS0 NOR / CS2 ExtNOR
|
|
*/
|
|
|
|
/*
|
|
* SCIFA5 (CN42)
|
|
*
|
|
* S38.3 = ON
|
|
* S39.6 = ON
|
|
* S43.1 = ON
|
|
*/
|
|
|
|
/*
|
|
* LCDC0 (CN3/CN4/CN7)
|
|
*
|
|
* S38.1 = OFF
|
|
* S38.2 = OFF
|
|
*/
|
|
|
|
/* Dummy supplies, where voltage doesn't matter */
|
|
static struct regulator_consumer_supply dummy_supplies[] = {
|
|
REGULATOR_SUPPLY("vddvario", "smsc911x"),
|
|
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
|
|
};
|
|
|
|
/*
|
|
* FPGA
|
|
*/
|
|
#define IRQSR0 0x0020
|
|
#define IRQSR1 0x0022
|
|
#define IRQMR0 0x0030
|
|
#define IRQMR1 0x0032
|
|
#define BUSSWMR1 0x0070
|
|
#define BUSSWMR2 0x0072
|
|
#define BUSSWMR3 0x0074
|
|
#define BUSSWMR4 0x0076
|
|
|
|
#define LCDCR 0x10B4
|
|
#define DEVRSTCR1 0x10D0
|
|
#define DEVRSTCR2 0x10D2
|
|
#define A1MDSR 0x10E0
|
|
#define BVERR 0x1100
|
|
|
|
/* FPGA IRQ */
|
|
#define FPGA_IRQ_BASE (512)
|
|
#define FPGA_IRQ0 (FPGA_IRQ_BASE)
|
|
#define FPGA_IRQ1 (FPGA_IRQ_BASE + 16)
|
|
#define FPGA_ETH_IRQ (FPGA_IRQ0 + 15)
|
|
static u16 bonito_fpga_read(u32 offset)
|
|
{
|
|
return __raw_readw(IOMEM(0xf0003000) + offset);
|
|
}
|
|
|
|
static void bonito_fpga_write(u32 offset, u16 val)
|
|
{
|
|
__raw_writew(val, IOMEM(0xf0003000) + offset);
|
|
}
|
|
|
|
static void bonito_fpga_irq_disable(struct irq_data *data)
|
|
{
|
|
unsigned int irq = data->irq;
|
|
u32 addr = (irq < 1016) ? IRQMR0 : IRQMR1;
|
|
int shift = irq % 16;
|
|
|
|
bonito_fpga_write(addr, bonito_fpga_read(addr) | (1 << shift));
|
|
}
|
|
|
|
static void bonito_fpga_irq_enable(struct irq_data *data)
|
|
{
|
|
unsigned int irq = data->irq;
|
|
u32 addr = (irq < 1016) ? IRQMR0 : IRQMR1;
|
|
int shift = irq % 16;
|
|
|
|
bonito_fpga_write(addr, bonito_fpga_read(addr) & ~(1 << shift));
|
|
}
|
|
|
|
static struct irq_chip bonito_fpga_irq_chip __read_mostly = {
|
|
.name = "bonito FPGA",
|
|
.irq_mask = bonito_fpga_irq_disable,
|
|
.irq_unmask = bonito_fpga_irq_enable,
|
|
};
|
|
|
|
static void bonito_fpga_irq_demux(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
u32 val = bonito_fpga_read(IRQSR1) << 16 |
|
|
bonito_fpga_read(IRQSR0);
|
|
u32 mask = bonito_fpga_read(IRQMR1) << 16 |
|
|
bonito_fpga_read(IRQMR0);
|
|
|
|
int i;
|
|
|
|
val &= ~mask;
|
|
|
|
for (i = 0; i < 32; i++) {
|
|
if (!(val & (1 << i)))
|
|
continue;
|
|
|
|
generic_handle_irq(FPGA_IRQ_BASE + i);
|
|
}
|
|
}
|
|
|
|
static void bonito_fpga_init(void)
|
|
{
|
|
int i;
|
|
|
|
bonito_fpga_write(IRQMR0, 0xffff); /* mask all */
|
|
bonito_fpga_write(IRQMR1, 0xffff); /* mask all */
|
|
|
|
/* Device reset */
|
|
bonito_fpga_write(DEVRSTCR1,
|
|
(1 << 2)); /* Eth */
|
|
|
|
/* FPGA irq require special handling */
|
|
for (i = FPGA_IRQ_BASE; i < FPGA_IRQ_BASE + 32; i++) {
|
|
irq_set_chip_and_handler_name(i, &bonito_fpga_irq_chip,
|
|
handle_level_irq, "level");
|
|
set_irq_flags(i, IRQF_VALID); /* yuck */
|
|
}
|
|
|
|
irq_set_chained_handler(evt2irq(0x0340), bonito_fpga_irq_demux);
|
|
irq_set_irq_type(evt2irq(0x0340), IRQ_TYPE_LEVEL_LOW);
|
|
}
|
|
|
|
/*
|
|
* PMIC settings
|
|
*
|
|
* FIXME
|
|
*
|
|
* bonito board needs some settings by pmic which use i2c access.
|
|
* pmic settings use device_initcall() here for use it.
|
|
*/
|
|
static __u8 *pmic_settings = NULL;
|
|
static __u8 pmic_do_2A[] = {
|
|
0x1C, 0x09,
|
|
0x1A, 0x80,
|
|
0xff, 0xff,
|
|
};
|
|
|
|
static int __init pmic_init(void)
|
|
{
|
|
struct i2c_adapter *a = i2c_get_adapter(0);
|
|
struct i2c_msg msg;
|
|
__u8 buf[2];
|
|
int i, ret;
|
|
|
|
if (!pmic_settings)
|
|
return 0;
|
|
if (!a)
|
|
return 0;
|
|
|
|
msg.addr = 0x46;
|
|
msg.buf = buf;
|
|
msg.len = 2;
|
|
msg.flags = 0;
|
|
|
|
for (i = 0; ; i += 2) {
|
|
buf[0] = pmic_settings[i + 0];
|
|
buf[1] = pmic_settings[i + 1];
|
|
|
|
if ((0xff == buf[0]) && (0xff == buf[1]))
|
|
break;
|
|
|
|
ret = i2c_transfer(a, &msg, 1);
|
|
if (ret < 0) {
|
|
pr_err("i2c transfer fail\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
device_initcall(pmic_init);
|
|
|
|
/*
|
|
* LCDC0
|
|
*/
|
|
static const struct fb_videomode lcdc0_mode = {
|
|
.name = "WVGA Panel",
|
|
.xres = 800,
|
|
.yres = 480,
|
|
.left_margin = 88,
|
|
.right_margin = 40,
|
|
.hsync_len = 128,
|
|
.upper_margin = 20,
|
|
.lower_margin = 5,
|
|
.vsync_len = 5,
|
|
.sync = 0,
|
|
};
|
|
|
|
static struct sh_mobile_lcdc_info lcdc0_info = {
|
|
.clock_source = LCDC_CLK_BUS,
|
|
.ch[0] = {
|
|
.chan = LCDC_CHAN_MAINLCD,
|
|
.fourcc = V4L2_PIX_FMT_RGB565,
|
|
.interface_type = RGB24,
|
|
.clock_divider = 5,
|
|
.flags = 0,
|
|
.lcd_modes = &lcdc0_mode,
|
|
.num_modes = 1,
|
|
.panel_cfg = {
|
|
.width = 152,
|
|
.height = 91,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct resource lcdc0_resources[] = {
|
|
[0] = {
|
|
.name = "LCDC0",
|
|
.start = 0xfe940000,
|
|
.end = 0xfe943fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = intcs_evt2irq(0x0580),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device lcdc0_device = {
|
|
.name = "sh_mobile_lcdc_fb",
|
|
.id = 0,
|
|
.resource = lcdc0_resources,
|
|
.num_resources = ARRAY_SIZE(lcdc0_resources),
|
|
.dev = {
|
|
.platform_data = &lcdc0_info,
|
|
.coherent_dma_mask = ~0,
|
|
},
|
|
};
|
|
|
|
static const struct pinctrl_map lcdc0_pinctrl_map[] = {
|
|
/* LCD0 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
|
|
"lcd0_data24_1", "lcd0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
|
|
"lcd0_lclk_1", "lcd0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
|
|
"lcd0_sync", "lcd0"),
|
|
};
|
|
|
|
/*
|
|
* SMSC 9221
|
|
*/
|
|
static struct resource smsc_resources[] = {
|
|
[0] = {
|
|
.start = 0x18010000,
|
|
.end = 0x18011000 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = FPGA_ETH_IRQ,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct smsc911x_platform_config smsc_platdata = {
|
|
.flags = SMSC911X_USE_16BIT,
|
|
.phy_interface = PHY_INTERFACE_MODE_MII,
|
|
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
|
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
|
|
};
|
|
|
|
static struct platform_device smsc_device = {
|
|
.name = "smsc911x",
|
|
.dev = {
|
|
.platform_data = &smsc_platdata,
|
|
},
|
|
.resource = smsc_resources,
|
|
.num_resources = ARRAY_SIZE(smsc_resources),
|
|
};
|
|
|
|
/*
|
|
* core board devices
|
|
*/
|
|
static struct platform_device *bonito_core_devices[] __initdata = {
|
|
};
|
|
|
|
/*
|
|
* base board devices
|
|
*/
|
|
static struct platform_device *bonito_base_devices[] __initdata = {
|
|
&lcdc0_device,
|
|
&smsc_device,
|
|
};
|
|
|
|
/*
|
|
* map I/O
|
|
*/
|
|
static struct map_desc bonito_io_desc[] __initdata = {
|
|
/*
|
|
* for FPGA (0x1800000-0x19ffffff)
|
|
* 0x18000000-0x18002000 -> 0xf0003000-0xf0005000
|
|
*/
|
|
{
|
|
.virtual = 0xf0003000,
|
|
.pfn = __phys_to_pfn(0x18000000),
|
|
.length = PAGE_SIZE * 2,
|
|
.type = MT_DEVICE_NONSHARED
|
|
}
|
|
};
|
|
|
|
static void __init bonito_map_io(void)
|
|
{
|
|
r8a7740_map_io();
|
|
iotable_init(bonito_io_desc, ARRAY_SIZE(bonito_io_desc));
|
|
}
|
|
|
|
/*
|
|
* board init
|
|
*/
|
|
#define BIT_ON(sw, bit) (sw & (1 << bit))
|
|
#define BIT_OFF(sw, bit) (!(sw & (1 << bit)))
|
|
|
|
#define VCCQ1CR IOMEM(0xE6058140)
|
|
#define VCCQ1LCDCR IOMEM(0xE6058186)
|
|
|
|
static void __init bonito_init(void)
|
|
{
|
|
u16 val;
|
|
|
|
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
|
|
|
|
r8a7740_pinmux_init();
|
|
bonito_fpga_init();
|
|
|
|
pmic_settings = pmic_do_2A;
|
|
|
|
/*
|
|
* core board settings
|
|
*/
|
|
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
/* Early BRESP enable, Shared attribute override enable, 32K*8way */
|
|
l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
|
|
#endif
|
|
|
|
r8a7740_add_standard_devices();
|
|
|
|
platform_add_devices(bonito_core_devices,
|
|
ARRAY_SIZE(bonito_core_devices));
|
|
|
|
/*
|
|
* base board settings
|
|
*/
|
|
gpio_request_one(176, GPIOF_IN, NULL);
|
|
if (!gpio_get_value(176)) {
|
|
u16 bsw2;
|
|
u16 bsw3;
|
|
u16 bsw4;
|
|
|
|
/*
|
|
* FPGA
|
|
*/
|
|
gpio_request(GPIO_FN_CS5B, NULL);
|
|
gpio_request(GPIO_FN_CS6A, NULL);
|
|
gpio_request(GPIO_FN_CS5A_PORT105, NULL);
|
|
gpio_request(GPIO_FN_IRQ10, NULL);
|
|
|
|
val = bonito_fpga_read(BVERR);
|
|
pr_info("bonito version: cpu %02x, base %02x\n",
|
|
((val >> 8) & 0xFF),
|
|
((val >> 0) & 0xFF));
|
|
|
|
bsw2 = bonito_fpga_read(BUSSWMR2);
|
|
bsw3 = bonito_fpga_read(BUSSWMR3);
|
|
bsw4 = bonito_fpga_read(BUSSWMR4);
|
|
|
|
/*
|
|
* SCIFA5 (CN42)
|
|
*/
|
|
if (BIT_OFF(bsw2, 1) && /* S38.3 = ON */
|
|
BIT_OFF(bsw3, 9) && /* S39.6 = ON */
|
|
BIT_OFF(bsw4, 4)) { /* S43.1 = ON */
|
|
gpio_request(GPIO_FN_SCIFA5_TXD_PORT91, NULL);
|
|
gpio_request(GPIO_FN_SCIFA5_RXD_PORT92, NULL);
|
|
}
|
|
|
|
/*
|
|
* LCDC0 (CN3)
|
|
*/
|
|
if (BIT_ON(bsw2, 3) && /* S38.1 = OFF */
|
|
BIT_ON(bsw2, 2)) { /* S38.2 = OFF */
|
|
pinctrl_register_mappings(lcdc0_pinctrl_map,
|
|
ARRAY_SIZE(lcdc0_pinctrl_map));
|
|
gpio_request(GPIO_FN_LCDC0_SELECT, NULL);
|
|
|
|
gpio_request_one(61, GPIOF_OUT_INIT_HIGH,
|
|
NULL); /* LCDDON */
|
|
|
|
/* backlight on */
|
|
bonito_fpga_write(LCDCR, 1);
|
|
|
|
/* drivability Max */
|
|
__raw_writew(0x00FF , VCCQ1LCDCR);
|
|
__raw_writew(0xFFFF , VCCQ1CR);
|
|
}
|
|
|
|
platform_add_devices(bonito_base_devices,
|
|
ARRAY_SIZE(bonito_base_devices));
|
|
}
|
|
}
|
|
|
|
static void __init bonito_earlytimer_init(void)
|
|
{
|
|
u16 val;
|
|
u8 md_ck = 0;
|
|
|
|
/* read MD_CK value */
|
|
val = bonito_fpga_read(A1MDSR);
|
|
if (val & (1 << 10))
|
|
md_ck |= MD_CK2;
|
|
if (val & (1 << 9))
|
|
md_ck |= MD_CK1;
|
|
if (val & (1 << 8))
|
|
md_ck |= MD_CK0;
|
|
|
|
r8a7740_clock_init(md_ck);
|
|
shmobile_earlytimer_init();
|
|
}
|
|
|
|
static void __init bonito_add_early_devices(void)
|
|
{
|
|
r8a7740_add_early_devices();
|
|
}
|
|
|
|
MACHINE_START(BONITO, "bonito")
|
|
.map_io = bonito_map_io,
|
|
.init_early = bonito_add_early_devices,
|
|
.init_irq = r8a7740_init_irq,
|
|
.handle_irq = shmobile_handle_irq_intc,
|
|
.init_machine = bonito_init,
|
|
.init_late = shmobile_init_late,
|
|
.init_time = bonito_earlytimer_init,
|
|
MACHINE_END
|