mirror of https://gitee.com/openkylin/linux.git
803 lines
20 KiB
C
803 lines
20 KiB
C
/*
|
|
* linux/drivers/mtd/onenand/omap2.c
|
|
*
|
|
* OneNAND driver for OMAP2 / OMAP3
|
|
*
|
|
* Copyright © 2005-2006 Nokia Corporation
|
|
*
|
|
* Author: Jarkko Lavinen <jarkko.lavinen@nokia.com> and Juha Yrjölä
|
|
* IRQ and DMA support written by Timo Teras
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; see the file COPYING. If not, write to the Free Software
|
|
* Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/onenand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/mach/flash.h>
|
|
#include <asm/arch/gpmc.h>
|
|
#include <asm/arch/onenand.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/gpmc.h>
|
|
#include <asm/arch/pm.h>
|
|
|
|
#include <linux/dma-mapping.h>
|
|
#include <asm/dma-mapping.h>
|
|
#include <asm/arch/dma.h>
|
|
|
|
#include <asm/arch/board.h>
|
|
|
|
#define DRIVER_NAME "omap2-onenand"
|
|
|
|
#define ONENAND_IO_SIZE SZ_128K
|
|
#define ONENAND_BUFRAM_SIZE (1024 * 5)
|
|
|
|
struct omap2_onenand {
|
|
struct platform_device *pdev;
|
|
int gpmc_cs;
|
|
unsigned long phys_base;
|
|
int gpio_irq;
|
|
struct mtd_info mtd;
|
|
struct mtd_partition *parts;
|
|
struct onenand_chip onenand;
|
|
struct completion irq_done;
|
|
struct completion dma_done;
|
|
int dma_channel;
|
|
int freq;
|
|
int (*setup)(void __iomem *base, int freq);
|
|
};
|
|
|
|
static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
|
|
{
|
|
struct omap2_onenand *c = data;
|
|
|
|
complete(&c->dma_done);
|
|
}
|
|
|
|
static irqreturn_t omap2_onenand_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct omap2_onenand *c = dev_id;
|
|
|
|
complete(&c->irq_done);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static inline unsigned short read_reg(struct omap2_onenand *c, int reg)
|
|
{
|
|
return readw(c->onenand.base + reg);
|
|
}
|
|
|
|
static inline void write_reg(struct omap2_onenand *c, unsigned short value,
|
|
int reg)
|
|
{
|
|
writew(value, c->onenand.base + reg);
|
|
}
|
|
|
|
static void wait_err(char *msg, int state, unsigned int ctrl, unsigned int intr)
|
|
{
|
|
printk(KERN_ERR "onenand_wait: %s! state %d ctrl 0x%04x intr 0x%04x\n",
|
|
msg, state, ctrl, intr);
|
|
}
|
|
|
|
static void wait_warn(char *msg, int state, unsigned int ctrl,
|
|
unsigned int intr)
|
|
{
|
|
printk(KERN_WARNING "onenand_wait: %s! state %d ctrl 0x%04x "
|
|
"intr 0x%04x\n", msg, state, ctrl, intr);
|
|
}
|
|
|
|
static int omap2_onenand_wait(struct mtd_info *mtd, int state)
|
|
{
|
|
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
|
|
unsigned int intr = 0;
|
|
unsigned int ctrl;
|
|
unsigned long timeout;
|
|
u32 syscfg;
|
|
|
|
if (state == FL_RESETING) {
|
|
int i;
|
|
|
|
for (i = 0; i < 20; i++) {
|
|
udelay(1);
|
|
intr = read_reg(c, ONENAND_REG_INTERRUPT);
|
|
if (intr & ONENAND_INT_MASTER)
|
|
break;
|
|
}
|
|
ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
|
|
if (ctrl & ONENAND_CTRL_ERROR) {
|
|
wait_err("controller error", state, ctrl, intr);
|
|
return -EIO;
|
|
}
|
|
if (!(intr & ONENAND_INT_RESET)) {
|
|
wait_err("timeout", state, ctrl, intr);
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
if (state != FL_READING) {
|
|
int result;
|
|
|
|
/* Turn interrupts on */
|
|
syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
|
|
if (!(syscfg & ONENAND_SYS_CFG1_IOBE)) {
|
|
syscfg |= ONENAND_SYS_CFG1_IOBE;
|
|
write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
|
|
if (cpu_is_omap34xx())
|
|
/* Add a delay to let GPIO settle */
|
|
syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
|
|
}
|
|
|
|
INIT_COMPLETION(c->irq_done);
|
|
if (c->gpio_irq) {
|
|
result = omap_get_gpio_datain(c->gpio_irq);
|
|
if (result == -1) {
|
|
ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
|
|
intr = read_reg(c, ONENAND_REG_INTERRUPT);
|
|
wait_err("gpio error", state, ctrl, intr);
|
|
return -EIO;
|
|
}
|
|
} else
|
|
result = 0;
|
|
if (result == 0) {
|
|
int retry_cnt = 0;
|
|
retry:
|
|
result = wait_for_completion_timeout(&c->irq_done,
|
|
msecs_to_jiffies(20));
|
|
if (result == 0) {
|
|
/* Timeout after 20ms */
|
|
ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
|
|
if (ctrl & ONENAND_CTRL_ONGO) {
|
|
/*
|
|
* The operation seems to be still going
|
|
* so give it some more time.
|
|
*/
|
|
retry_cnt += 1;
|
|
if (retry_cnt < 3)
|
|
goto retry;
|
|
intr = read_reg(c,
|
|
ONENAND_REG_INTERRUPT);
|
|
wait_err("timeout", state, ctrl, intr);
|
|
return -EIO;
|
|
}
|
|
intr = read_reg(c, ONENAND_REG_INTERRUPT);
|
|
if ((intr & ONENAND_INT_MASTER) == 0)
|
|
wait_warn("timeout", state, ctrl, intr);
|
|
}
|
|
}
|
|
} else {
|
|
int retry_cnt = 0;
|
|
|
|
/* Turn interrupts off */
|
|
syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
|
|
syscfg &= ~ONENAND_SYS_CFG1_IOBE;
|
|
write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(20);
|
|
while (1) {
|
|
if (time_before(jiffies, timeout)) {
|
|
intr = read_reg(c, ONENAND_REG_INTERRUPT);
|
|
if (intr & ONENAND_INT_MASTER)
|
|
break;
|
|
} else {
|
|
/* Timeout after 20ms */
|
|
ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
|
|
if (ctrl & ONENAND_CTRL_ONGO) {
|
|
/*
|
|
* The operation seems to be still going
|
|
* so give it some more time.
|
|
*/
|
|
retry_cnt += 1;
|
|
if (retry_cnt < 3) {
|
|
timeout = jiffies +
|
|
msecs_to_jiffies(20);
|
|
continue;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
intr = read_reg(c, ONENAND_REG_INTERRUPT);
|
|
ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
|
|
|
|
if (intr & ONENAND_INT_READ) {
|
|
int ecc = read_reg(c, ONENAND_REG_ECC_STATUS);
|
|
|
|
if (ecc) {
|
|
unsigned int addr1, addr8;
|
|
|
|
addr1 = read_reg(c, ONENAND_REG_START_ADDRESS1);
|
|
addr8 = read_reg(c, ONENAND_REG_START_ADDRESS8);
|
|
if (ecc & ONENAND_ECC_2BIT_ALL) {
|
|
printk(KERN_ERR "onenand_wait: ECC error = "
|
|
"0x%04x, addr1 %#x, addr8 %#x\n",
|
|
ecc, addr1, addr8);
|
|
mtd->ecc_stats.failed++;
|
|
return -EBADMSG;
|
|
} else if (ecc & ONENAND_ECC_1BIT_ALL) {
|
|
printk(KERN_NOTICE "onenand_wait: correctable "
|
|
"ECC error = 0x%04x, addr1 %#x, "
|
|
"addr8 %#x\n", ecc, addr1, addr8);
|
|
mtd->ecc_stats.corrected++;
|
|
}
|
|
}
|
|
} else if (state == FL_READING) {
|
|
wait_err("timeout", state, ctrl, intr);
|
|
return -EIO;
|
|
}
|
|
|
|
if (ctrl & ONENAND_CTRL_ERROR) {
|
|
wait_err("controller error", state, ctrl, intr);
|
|
if (ctrl & ONENAND_CTRL_LOCK)
|
|
printk(KERN_ERR "onenand_wait: "
|
|
"Device is write protected!!!\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (ctrl & 0xFE9F)
|
|
wait_warn("unexpected controller status", state, ctrl, intr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int omap2_onenand_bufferram_offset(struct mtd_info *mtd, int area)
|
|
{
|
|
struct onenand_chip *this = mtd->priv;
|
|
|
|
if (ONENAND_CURRENT_BUFFERRAM(this)) {
|
|
if (area == ONENAND_DATARAM)
|
|
return mtd->writesize;
|
|
if (area == ONENAND_SPARERAM)
|
|
return mtd->oobsize;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_ARCH_OMAP3) || defined(MULTI_OMAP2)
|
|
|
|
static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
|
|
unsigned char *buffer, int offset,
|
|
size_t count)
|
|
{
|
|
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
|
|
struct onenand_chip *this = mtd->priv;
|
|
dma_addr_t dma_src, dma_dst;
|
|
int bram_offset;
|
|
unsigned long timeout;
|
|
void *buf = (void *)buffer;
|
|
size_t xtra;
|
|
volatile unsigned *done;
|
|
|
|
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
|
|
if (bram_offset & 3 || (size_t)buf & 3 || count < 384)
|
|
goto out_copy;
|
|
|
|
if (buf >= high_memory) {
|
|
struct page *p1;
|
|
|
|
if (((size_t)buf & PAGE_MASK) !=
|
|
((size_t)(buf + count - 1) & PAGE_MASK))
|
|
goto out_copy;
|
|
p1 = vmalloc_to_page(buf);
|
|
if (!p1)
|
|
goto out_copy;
|
|
buf = page_address(p1) + ((size_t)buf & ~PAGE_MASK);
|
|
}
|
|
|
|
xtra = count & 3;
|
|
if (xtra) {
|
|
count -= xtra;
|
|
memcpy(buf + count, this->base + bram_offset + count, xtra);
|
|
}
|
|
|
|
dma_src = c->phys_base + bram_offset;
|
|
dma_dst = dma_map_single(&c->pdev->dev, buf, count, DMA_FROM_DEVICE);
|
|
if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
|
|
dev_err(&c->pdev->dev,
|
|
"Couldn't DMA map a %d byte buffer\n",
|
|
count);
|
|
goto out_copy;
|
|
}
|
|
|
|
omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
|
|
count >> 2, 1, 0, 0, 0);
|
|
omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
|
|
dma_src, 0, 0);
|
|
omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
|
|
dma_dst, 0, 0);
|
|
|
|
INIT_COMPLETION(c->dma_done);
|
|
omap_start_dma(c->dma_channel);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(20);
|
|
done = &c->dma_done.done;
|
|
while (time_before(jiffies, timeout))
|
|
if (*done)
|
|
break;
|
|
|
|
dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE);
|
|
|
|
if (!*done) {
|
|
dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
|
|
goto out_copy;
|
|
}
|
|
|
|
return 0;
|
|
|
|
out_copy:
|
|
memcpy(buf, this->base + bram_offset, count);
|
|
return 0;
|
|
}
|
|
|
|
static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
|
|
const unsigned char *buffer,
|
|
int offset, size_t count)
|
|
{
|
|
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
|
|
struct onenand_chip *this = mtd->priv;
|
|
dma_addr_t dma_src, dma_dst;
|
|
int bram_offset;
|
|
unsigned long timeout;
|
|
void *buf = (void *)buffer;
|
|
volatile unsigned *done;
|
|
|
|
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
|
|
if (bram_offset & 3 || (size_t)buf & 3 || count < 384)
|
|
goto out_copy;
|
|
|
|
/* panic_write() may be in an interrupt context */
|
|
if (in_interrupt())
|
|
goto out_copy;
|
|
|
|
if (buf >= high_memory) {
|
|
struct page *p1;
|
|
|
|
if (((size_t)buf & PAGE_MASK) !=
|
|
((size_t)(buf + count - 1) & PAGE_MASK))
|
|
goto out_copy;
|
|
p1 = vmalloc_to_page(buf);
|
|
if (!p1)
|
|
goto out_copy;
|
|
buf = page_address(p1) + ((size_t)buf & ~PAGE_MASK);
|
|
}
|
|
|
|
dma_src = dma_map_single(&c->pdev->dev, buf, count, DMA_TO_DEVICE);
|
|
dma_dst = c->phys_base + bram_offset;
|
|
if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
|
|
dev_err(&c->pdev->dev,
|
|
"Couldn't DMA map a %d byte buffer\n",
|
|
count);
|
|
return -1;
|
|
}
|
|
|
|
omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
|
|
count >> 2, 1, 0, 0, 0);
|
|
omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
|
|
dma_src, 0, 0);
|
|
omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
|
|
dma_dst, 0, 0);
|
|
|
|
INIT_COMPLETION(c->dma_done);
|
|
omap_start_dma(c->dma_channel);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(20);
|
|
done = &c->dma_done.done;
|
|
while (time_before(jiffies, timeout))
|
|
if (*done)
|
|
break;
|
|
|
|
dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_TO_DEVICE);
|
|
|
|
if (!*done) {
|
|
dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
|
|
goto out_copy;
|
|
}
|
|
|
|
return 0;
|
|
|
|
out_copy:
|
|
memcpy(this->base + bram_offset, buf, count);
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
|
|
int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
|
|
unsigned char *buffer, int offset,
|
|
size_t count);
|
|
|
|
int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
|
|
const unsigned char *buffer,
|
|
int offset, size_t count);
|
|
|
|
#endif
|
|
|
|
#if defined(CONFIG_ARCH_OMAP2) || defined(MULTI_OMAP2)
|
|
|
|
static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
|
|
unsigned char *buffer, int offset,
|
|
size_t count)
|
|
{
|
|
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
|
|
struct onenand_chip *this = mtd->priv;
|
|
dma_addr_t dma_src, dma_dst;
|
|
int bram_offset;
|
|
|
|
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
|
|
/* DMA is not used. Revisit PM requirements before enabling it. */
|
|
if (1 || (c->dma_channel < 0) ||
|
|
((void *) buffer >= (void *) high_memory) || (bram_offset & 3) ||
|
|
(((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) {
|
|
memcpy(buffer, (__force void *)(this->base + bram_offset),
|
|
count);
|
|
return 0;
|
|
}
|
|
|
|
dma_src = c->phys_base + bram_offset;
|
|
dma_dst = dma_map_single(&c->pdev->dev, buffer, count,
|
|
DMA_FROM_DEVICE);
|
|
if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
|
|
dev_err(&c->pdev->dev,
|
|
"Couldn't DMA map a %d byte buffer\n",
|
|
count);
|
|
return -1;
|
|
}
|
|
|
|
omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
|
|
count / 4, 1, 0, 0, 0);
|
|
omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
|
|
dma_src, 0, 0);
|
|
omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
|
|
dma_dst, 0, 0);
|
|
|
|
INIT_COMPLETION(c->dma_done);
|
|
omap_start_dma(c->dma_channel);
|
|
wait_for_completion(&c->dma_done);
|
|
|
|
dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
|
|
const unsigned char *buffer,
|
|
int offset, size_t count)
|
|
{
|
|
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
|
|
struct onenand_chip *this = mtd->priv;
|
|
dma_addr_t dma_src, dma_dst;
|
|
int bram_offset;
|
|
|
|
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
|
|
/* DMA is not used. Revisit PM requirements before enabling it. */
|
|
if (1 || (c->dma_channel < 0) ||
|
|
((void *) buffer >= (void *) high_memory) || (bram_offset & 3) ||
|
|
(((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) {
|
|
memcpy((__force void *)(this->base + bram_offset), buffer,
|
|
count);
|
|
return 0;
|
|
}
|
|
|
|
dma_src = dma_map_single(&c->pdev->dev, (void *) buffer, count,
|
|
DMA_TO_DEVICE);
|
|
dma_dst = c->phys_base + bram_offset;
|
|
if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
|
|
dev_err(&c->pdev->dev,
|
|
"Couldn't DMA map a %d byte buffer\n",
|
|
count);
|
|
return -1;
|
|
}
|
|
|
|
omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S16,
|
|
count / 2, 1, 0, 0, 0);
|
|
omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
|
|
dma_src, 0, 0);
|
|
omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
|
|
dma_dst, 0, 0);
|
|
|
|
INIT_COMPLETION(c->dma_done);
|
|
omap_start_dma(c->dma_channel);
|
|
wait_for_completion(&c->dma_done);
|
|
|
|
dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_TO_DEVICE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
|
|
int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
|
|
unsigned char *buffer, int offset,
|
|
size_t count);
|
|
|
|
int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
|
|
const unsigned char *buffer,
|
|
int offset, size_t count);
|
|
|
|
#endif
|
|
|
|
static struct platform_driver omap2_onenand_driver;
|
|
|
|
static int __adjust_timing(struct device *dev, void *data)
|
|
{
|
|
int ret = 0;
|
|
struct omap2_onenand *c;
|
|
|
|
c = dev_get_drvdata(dev);
|
|
|
|
BUG_ON(c->setup == NULL);
|
|
|
|
/* DMA is not in use so this is all that is needed */
|
|
/* Revisit for OMAP3! */
|
|
ret = c->setup(c->onenand.base, c->freq);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int omap2_onenand_rephase(void)
|
|
{
|
|
return driver_for_each_device(&omap2_onenand_driver.driver, NULL,
|
|
NULL, __adjust_timing);
|
|
}
|
|
|
|
static void __devexit omap2_onenand_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
|
|
|
|
/* With certain content in the buffer RAM, the OMAP boot ROM code
|
|
* can recognize the flash chip incorrectly. Zero it out before
|
|
* soft reset.
|
|
*/
|
|
memset((__force void *)c->onenand.base, 0, ONENAND_BUFRAM_SIZE);
|
|
}
|
|
|
|
static int __devinit omap2_onenand_probe(struct platform_device *pdev)
|
|
{
|
|
struct omap_onenand_platform_data *pdata;
|
|
struct omap2_onenand *c;
|
|
int r;
|
|
|
|
pdata = pdev->dev.platform_data;
|
|
if (pdata == NULL) {
|
|
dev_err(&pdev->dev, "platform data missing\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
c = kzalloc(sizeof(struct omap2_onenand), GFP_KERNEL);
|
|
if (!c)
|
|
return -ENOMEM;
|
|
|
|
init_completion(&c->irq_done);
|
|
init_completion(&c->dma_done);
|
|
c->gpmc_cs = pdata->cs;
|
|
c->gpio_irq = pdata->gpio_irq;
|
|
c->dma_channel = pdata->dma_channel;
|
|
if (c->dma_channel < 0) {
|
|
/* if -1, don't use DMA */
|
|
c->gpio_irq = 0;
|
|
}
|
|
|
|
r = gpmc_cs_request(c->gpmc_cs, ONENAND_IO_SIZE, &c->phys_base);
|
|
if (r < 0) {
|
|
dev_err(&pdev->dev, "Cannot request GPMC CS\n");
|
|
goto err_kfree;
|
|
}
|
|
|
|
if (request_mem_region(c->phys_base, ONENAND_IO_SIZE,
|
|
pdev->dev.driver->name) == NULL) {
|
|
dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, "
|
|
"size: 0x%x\n", c->phys_base, ONENAND_IO_SIZE);
|
|
r = -EBUSY;
|
|
goto err_free_cs;
|
|
}
|
|
c->onenand.base = ioremap(c->phys_base, ONENAND_IO_SIZE);
|
|
if (c->onenand.base == NULL) {
|
|
r = -ENOMEM;
|
|
goto err_release_mem_region;
|
|
}
|
|
|
|
if (pdata->onenand_setup != NULL) {
|
|
r = pdata->onenand_setup(c->onenand.base, c->freq);
|
|
if (r < 0) {
|
|
dev_err(&pdev->dev, "Onenand platform setup failed: "
|
|
"%d\n", r);
|
|
goto err_iounmap;
|
|
}
|
|
c->setup = pdata->onenand_setup;
|
|
}
|
|
|
|
if (c->gpio_irq) {
|
|
if ((r = omap_request_gpio(c->gpio_irq)) < 0) {
|
|
dev_err(&pdev->dev, "Failed to request GPIO%d for "
|
|
"OneNAND\n", c->gpio_irq);
|
|
goto err_iounmap;
|
|
}
|
|
omap_set_gpio_direction(c->gpio_irq, 1);
|
|
|
|
if ((r = request_irq(OMAP_GPIO_IRQ(c->gpio_irq),
|
|
omap2_onenand_interrupt, IRQF_TRIGGER_RISING,
|
|
pdev->dev.driver->name, c)) < 0)
|
|
goto err_release_gpio;
|
|
}
|
|
|
|
if (c->dma_channel >= 0) {
|
|
r = omap_request_dma(0, pdev->dev.driver->name,
|
|
omap2_onenand_dma_cb, (void *) c,
|
|
&c->dma_channel);
|
|
if (r == 0) {
|
|
omap_set_dma_write_mode(c->dma_channel,
|
|
OMAP_DMA_WRITE_NON_POSTED);
|
|
omap_set_dma_src_data_pack(c->dma_channel, 1);
|
|
omap_set_dma_src_burst_mode(c->dma_channel,
|
|
OMAP_DMA_DATA_BURST_8);
|
|
omap_set_dma_dest_data_pack(c->dma_channel, 1);
|
|
omap_set_dma_dest_burst_mode(c->dma_channel,
|
|
OMAP_DMA_DATA_BURST_8);
|
|
} else {
|
|
dev_info(&pdev->dev,
|
|
"failed to allocate DMA for OneNAND, "
|
|
"using PIO instead\n");
|
|
c->dma_channel = -1;
|
|
}
|
|
}
|
|
|
|
dev_info(&pdev->dev, "initializing on CS%d, phys base 0x%08lx, virtual "
|
|
"base %p\n", c->gpmc_cs, c->phys_base,
|
|
c->onenand.base);
|
|
|
|
c->pdev = pdev;
|
|
c->mtd.name = pdev->dev.bus_id;
|
|
c->mtd.priv = &c->onenand;
|
|
c->mtd.owner = THIS_MODULE;
|
|
|
|
if (c->dma_channel >= 0) {
|
|
struct onenand_chip *this = &c->onenand;
|
|
|
|
this->wait = omap2_onenand_wait;
|
|
if (cpu_is_omap34xx()) {
|
|
this->read_bufferram = omap3_onenand_read_bufferram;
|
|
this->write_bufferram = omap3_onenand_write_bufferram;
|
|
} else {
|
|
this->read_bufferram = omap2_onenand_read_bufferram;
|
|
this->write_bufferram = omap2_onenand_write_bufferram;
|
|
}
|
|
}
|
|
|
|
if ((r = onenand_scan(&c->mtd, 1)) < 0)
|
|
goto err_release_dma;
|
|
|
|
switch ((c->onenand.version_id >> 4) & 0xf) {
|
|
case 0:
|
|
c->freq = 40;
|
|
break;
|
|
case 1:
|
|
c->freq = 54;
|
|
break;
|
|
case 2:
|
|
c->freq = 66;
|
|
break;
|
|
case 3:
|
|
c->freq = 83;
|
|
break;
|
|
}
|
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
if (pdata->parts != NULL)
|
|
r = add_mtd_partitions(&c->mtd, pdata->parts,
|
|
pdata->nr_parts);
|
|
else
|
|
#endif
|
|
r = add_mtd_device(&c->mtd);
|
|
if (r < 0)
|
|
goto err_release_onenand;
|
|
|
|
platform_set_drvdata(pdev, c);
|
|
|
|
return 0;
|
|
|
|
err_release_onenand:
|
|
onenand_release(&c->mtd);
|
|
err_release_dma:
|
|
if (c->dma_channel != -1)
|
|
omap_free_dma(c->dma_channel);
|
|
if (c->gpio_irq)
|
|
free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c);
|
|
err_release_gpio:
|
|
if (c->gpio_irq)
|
|
omap_free_gpio(c->gpio_irq);
|
|
err_iounmap:
|
|
iounmap(c->onenand.base);
|
|
err_release_mem_region:
|
|
release_mem_region(c->phys_base, ONENAND_IO_SIZE);
|
|
err_free_cs:
|
|
gpmc_cs_free(c->gpmc_cs);
|
|
err_kfree:
|
|
kfree(c);
|
|
|
|
return r;
|
|
}
|
|
|
|
static int __devexit omap2_onenand_remove(struct platform_device *pdev)
|
|
{
|
|
struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
|
|
|
|
BUG_ON(c == NULL);
|
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
if (c->parts)
|
|
del_mtd_partitions(&c->mtd);
|
|
else
|
|
del_mtd_device(&c->mtd);
|
|
#else
|
|
del_mtd_device(&c->mtd);
|
|
#endif
|
|
|
|
onenand_release(&c->mtd);
|
|
if (c->dma_channel != -1)
|
|
omap_free_dma(c->dma_channel);
|
|
omap2_onenand_shutdown(pdev);
|
|
platform_set_drvdata(pdev, NULL);
|
|
if (c->gpio_irq) {
|
|
free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c);
|
|
omap_free_gpio(c->gpio_irq);
|
|
}
|
|
iounmap(c->onenand.base);
|
|
release_mem_region(c->phys_base, ONENAND_IO_SIZE);
|
|
kfree(c);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver omap2_onenand_driver = {
|
|
.probe = omap2_onenand_probe,
|
|
.remove = omap2_onenand_remove,
|
|
.shutdown = omap2_onenand_shutdown,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init omap2_onenand_init(void)
|
|
{
|
|
printk(KERN_INFO "OneNAND driver initializing\n");
|
|
return platform_driver_register(&omap2_onenand_driver);
|
|
}
|
|
|
|
static void __exit omap2_onenand_exit(void)
|
|
{
|
|
platform_driver_unregister(&omap2_onenand_driver);
|
|
}
|
|
|
|
module_init(omap2_onenand_init);
|
|
module_exit(omap2_onenand_exit);
|
|
|
|
MODULE_ALIAS(DRIVER_NAME);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Jarkko Lavinen <jarkko.lavinen@nokia.com>");
|
|
MODULE_DESCRIPTION("Glue layer for OneNAND flash on OMAP2 / OMAP3");
|