linux/drivers/media/platform/marvell-ccic/mmp-driver.c

536 lines
13 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Support for the camera device found on Marvell MMP processors; known
* to work with the Armada 610 as used in the OLPC 1.75 system.
*
* Copyright 2011 Jonathan Corbet <corbet@lwn.net>
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/platform_data/i2c-gpio.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <linux/platform_data/media/mmp-camera.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/list.h>
#include <linux/pm.h>
#include <linux/clk.h>
#include "mcam-core.h"
MODULE_ALIAS("platform:mmp-camera");
MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
MODULE_LICENSE("GPL");
static char *mcam_clks[] = {"CCICAXICLK", "CCICFUNCLK", "CCICPHYCLK"};
struct mmp_camera {
void __iomem *power_regs;
struct platform_device *pdev;
struct mcam_camera mcam;
struct list_head devlist;
struct clk *mipi_clk;
int irq;
};
static inline struct mmp_camera *mcam_to_cam(struct mcam_camera *mcam)
{
return container_of(mcam, struct mmp_camera, mcam);
}
/*
* A silly little infrastructure so we can keep track of our devices.
* Chances are that we will never have more than one of them, but
* the Armada 610 *does* have two controllers...
*/
static LIST_HEAD(mmpcam_devices);
static struct mutex mmpcam_devices_lock;
static void mmpcam_add_device(struct mmp_camera *cam)
{
mutex_lock(&mmpcam_devices_lock);
list_add(&cam->devlist, &mmpcam_devices);
mutex_unlock(&mmpcam_devices_lock);
}
static void mmpcam_remove_device(struct mmp_camera *cam)
{
mutex_lock(&mmpcam_devices_lock);
list_del(&cam->devlist);
mutex_unlock(&mmpcam_devices_lock);
}
/*
* Platform dev remove passes us a platform_device, and there's
* no handy unused drvdata to stash a backpointer in. So just
* dig it out of our list.
*/
static struct mmp_camera *mmpcam_find_device(struct platform_device *pdev)
{
struct mmp_camera *cam;
mutex_lock(&mmpcam_devices_lock);
list_for_each_entry(cam, &mmpcam_devices, devlist) {
if (cam->pdev == pdev) {
mutex_unlock(&mmpcam_devices_lock);
return cam;
}
}
mutex_unlock(&mmpcam_devices_lock);
return NULL;
}
/*
* Power-related registers; this almost certainly belongs
* somewhere else.
*
* ARMADA 610 register manual, sec 7.2.1, p1842.
*/
#define CPU_SUBSYS_PMU_BASE 0xd4282800
#define REG_CCIC_DCGCR 0x28 /* CCIC dyn clock gate ctrl reg */
#define REG_CCIC_CRCR 0x50 /* CCIC clk reset ctrl reg */
#define REG_CCIC2_CRCR 0xf4 /* CCIC2 clk reset ctrl reg */
static void mcam_clk_enable(struct mcam_camera *mcam)
{
unsigned int i;
for (i = 0; i < NR_MCAM_CLK; i++) {
if (!IS_ERR(mcam->clk[i]))
clk_prepare_enable(mcam->clk[i]);
}
}
static void mcam_clk_disable(struct mcam_camera *mcam)
{
int i;
for (i = NR_MCAM_CLK - 1; i >= 0; i--) {
if (!IS_ERR(mcam->clk[i]))
clk_disable_unprepare(mcam->clk[i]);
}
}
/*
* Power control.
*/
static void mmpcam_power_up_ctlr(struct mmp_camera *cam)
{
iowrite32(0x3f, cam->power_regs + REG_CCIC_DCGCR);
iowrite32(0x3805b, cam->power_regs + REG_CCIC_CRCR);
mdelay(1);
}
static int mmpcam_power_up(struct mcam_camera *mcam)
{
struct mmp_camera *cam = mcam_to_cam(mcam);
struct mmp_camera_platform_data *pdata;
/*
* Turn on power and clocks to the controller.
*/
mmpcam_power_up_ctlr(cam);
/*
* Provide power to the sensor.
*/
mcam_reg_write(mcam, REG_CLKCTRL, 0x60000002);
pdata = cam->pdev->dev.platform_data;
gpio_set_value(pdata->sensor_power_gpio, 1);
mdelay(5);
mcam_reg_clear_bit(mcam, REG_CTRL1, 0x10000000);
gpio_set_value(pdata->sensor_reset_gpio, 0); /* reset is active low */
mdelay(5);
gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */
mdelay(5);
mcam_clk_enable(mcam);
return 0;
}
static void mmpcam_power_down(struct mcam_camera *mcam)
{
struct mmp_camera *cam = mcam_to_cam(mcam);
struct mmp_camera_platform_data *pdata;
/*
* Turn off clocks and set reset lines
*/
iowrite32(0, cam->power_regs + REG_CCIC_DCGCR);
iowrite32(0, cam->power_regs + REG_CCIC_CRCR);
/*
* Shut down the sensor.
*/
pdata = cam->pdev->dev.platform_data;
gpio_set_value(pdata->sensor_power_gpio, 0);
gpio_set_value(pdata->sensor_reset_gpio, 0);
mcam_clk_disable(mcam);
}
static void mcam_ctlr_reset(struct mcam_camera *mcam)
{
unsigned long val;
struct mmp_camera *cam = mcam_to_cam(mcam);
if (mcam->ccic_id) {
/*
* Using CCIC2
*/
val = ioread32(cam->power_regs + REG_CCIC2_CRCR);
iowrite32(val & ~0x2, cam->power_regs + REG_CCIC2_CRCR);
iowrite32(val | 0x2, cam->power_regs + REG_CCIC2_CRCR);
} else {
/*
* Using CCIC1
*/
val = ioread32(cam->power_regs + REG_CCIC_CRCR);
iowrite32(val & ~0x2, cam->power_regs + REG_CCIC_CRCR);
iowrite32(val | 0x2, cam->power_regs + REG_CCIC_CRCR);
}
}
/*
* calc the dphy register values
* There are three dphy registers being used.
* dphy[0] - CSI2_DPHY3
* dphy[1] - CSI2_DPHY5
* dphy[2] - CSI2_DPHY6
* CSI2_DPHY3 and CSI2_DPHY6 can be set with a default value
* or be calculated dynamically
*/
static void mmpcam_calc_dphy(struct mcam_camera *mcam)
{
struct mmp_camera *cam = mcam_to_cam(mcam);
struct mmp_camera_platform_data *pdata = cam->pdev->dev.platform_data;
struct device *dev = &cam->pdev->dev;
unsigned long tx_clk_esc;
/*
* If CSI2_DPHY3 is calculated dynamically,
* pdata->lane_clk should be already set
* either in the board driver statically
* or in the sensor driver dynamically.
*/
/*
* dphy[0] - CSI2_DPHY3:
* bit 0 ~ bit 7: HS Term Enable.
* defines the time that the DPHY
* wait before enabling the data
* lane termination after detecting
* that the sensor has driven the data
* lanes to the LP00 bridge state.
* The value is calculated by:
* (Max T(D_TERM_EN)/Period(DDR)) - 1
* bit 8 ~ bit 15: HS_SETTLE
* Time interval during which the HS
* receiver shall ignore any Data Lane
* HS transitions.
* The value has been calibrated on
* different boards. It seems to work well.
*
* More detail please refer
* MIPI Alliance Spectification for D-PHY
* document for explanation of HS-SETTLE
* and D-TERM-EN.
*/
switch (pdata->dphy3_algo) {
case DPHY3_ALGO_PXA910:
/*
* Calculate CSI2_DPHY3 algo for PXA910
*/
pdata->dphy[0] =
(((1 + (pdata->lane_clk * 80) / 1000) & 0xff) << 8)
| (1 + pdata->lane_clk * 35 / 1000);
break;
case DPHY3_ALGO_PXA2128:
/*
* Calculate CSI2_DPHY3 algo for PXA2128
*/
pdata->dphy[0] =
(((2 + (pdata->lane_clk * 110) / 1000) & 0xff) << 8)
| (1 + pdata->lane_clk * 35 / 1000);
break;
default:
/*
* Use default CSI2_DPHY3 value for PXA688/PXA988
*/
dev_dbg(dev, "camera: use the default CSI2_DPHY3 value\n");
}
/*
* mipi_clk will never be changed, it is a fixed value on MMP
*/
if (IS_ERR(cam->mipi_clk))
return;
/* get the escape clk, this is hard coded */
clk_prepare_enable(cam->mipi_clk);
tx_clk_esc = (clk_get_rate(cam->mipi_clk) / 1000000) / 12;
clk_disable_unprepare(cam->mipi_clk);
/*
* dphy[2] - CSI2_DPHY6:
* bit 0 ~ bit 7: CK Term Enable
* Time for the Clock Lane receiver to enable the HS line
* termination. The value is calculated similarly with
* HS Term Enable
* bit 8 ~ bit 15: CK Settle
* Time interval during which the HS receiver shall ignore
* any Clock Lane HS transitions.
* The value is calibrated on the boards.
*/
pdata->dphy[2] =
((((534 * tx_clk_esc) / 2000 - 1) & 0xff) << 8)
| (((38 * tx_clk_esc) / 1000 - 1) & 0xff);
dev_dbg(dev, "camera: DPHY sets: dphy3=0x%x, dphy5=0x%x, dphy6=0x%x\n",
pdata->dphy[0], pdata->dphy[1], pdata->dphy[2]);
}
static irqreturn_t mmpcam_irq(int irq, void *data)
{
struct mcam_camera *mcam = data;
unsigned int irqs, handled;
spin_lock(&mcam->dev_lock);
irqs = mcam_reg_read(mcam, REG_IRQSTAT);
handled = mccic_irq(mcam, irqs);
spin_unlock(&mcam->dev_lock);
return IRQ_RETVAL(handled);
}
static void mcam_init_clk(struct mcam_camera *mcam)
{
unsigned int i;
for (i = 0; i < NR_MCAM_CLK; i++) {
if (mcam_clks[i] != NULL) {
/* Some clks are not necessary on some boards
* We still try to run even it fails getting clk
*/
mcam->clk[i] = devm_clk_get(mcam->dev, mcam_clks[i]);
if (IS_ERR(mcam->clk[i]))
dev_warn(mcam->dev, "Could not get clk: %s\n",
mcam_clks[i]);
}
}
}
static int mmpcam_probe(struct platform_device *pdev)
{
struct mmp_camera *cam;
struct mcam_camera *mcam;
struct resource *res;
struct mmp_camera_platform_data *pdata;
int ret;
pdata = pdev->dev.platform_data;
if (!pdata)
return -ENODEV;
cam = devm_kzalloc(&pdev->dev, sizeof(*cam), GFP_KERNEL);
if (cam == NULL)
return -ENOMEM;
cam->pdev = pdev;
INIT_LIST_HEAD(&cam->devlist);
mcam = &cam->mcam;
mcam->plat_power_up = mmpcam_power_up;
mcam->plat_power_down = mmpcam_power_down;
mcam->ctlr_reset = mcam_ctlr_reset;
mcam->calc_dphy = mmpcam_calc_dphy;
mcam->dev = &pdev->dev;
mcam->use_smbus = 0;
mcam->ccic_id = pdev->id;
mcam->mclk_min = pdata->mclk_min;
mcam->mclk_src = pdata->mclk_src;
mcam->mclk_div = pdata->mclk_div;
mcam->bus_type = pdata->bus_type;
mcam->dphy = pdata->dphy;
if (mcam->bus_type == V4L2_MBUS_CSI2_DPHY) {
cam->mipi_clk = devm_clk_get(mcam->dev, "mipi");
if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0))
return PTR_ERR(cam->mipi_clk);
}
mcam->mipi_enabled = false;
mcam->lane = pdata->lane;
mcam->chip_id = MCAM_ARMADA610;
mcam->buffer_mode = B_DMA_sg;
strscpy(mcam->bus_info, "platform:mmp-camera", sizeof(mcam->bus_info));
spin_lock_init(&mcam->dev_lock);
/*
* Get our I/O memory.
*/
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mcam->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(mcam->regs))
return PTR_ERR(mcam->regs);
mcam->regs_size = resource_size(res);
/*
* Power/clock memory is elsewhere; get it too. Perhaps this
* should really be managed outside of this driver?
*/
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
cam->power_regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(cam->power_regs))
return PTR_ERR(cam->power_regs);
/*
* Find the i2c adapter. This assumes, of course, that the
* i2c bus is already up and functioning.
*/
mcam->i2c_adapter = platform_get_drvdata(pdata->i2c_device);
if (mcam->i2c_adapter == NULL) {
dev_err(&pdev->dev, "No i2c adapter\n");
return -ENODEV;
}
/*
* Sensor GPIO pins.
*/
ret = devm_gpio_request(&pdev->dev, pdata->sensor_power_gpio,
"cam-power");
if (ret) {
dev_err(&pdev->dev, "Can't get sensor power gpio %d",
pdata->sensor_power_gpio);
return ret;
}
gpio_direction_output(pdata->sensor_power_gpio, 0);
ret = devm_gpio_request(&pdev->dev, pdata->sensor_reset_gpio,
"cam-reset");
if (ret) {
dev_err(&pdev->dev, "Can't get sensor reset gpio %d",
pdata->sensor_reset_gpio);
return ret;
}
gpio_direction_output(pdata->sensor_reset_gpio, 0);
mcam_init_clk(mcam);
/*
* Power the device up and hand it off to the core.
*/
ret = mmpcam_power_up(mcam);
if (ret)
return ret;
ret = mccic_register(mcam);
if (ret)
goto out_power_down;
/*
* Finally, set up our IRQ now that the core is ready to
* deal with it.
*/
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res == NULL) {
ret = -ENODEV;
goto out_unregister;
}
cam->irq = res->start;
ret = devm_request_irq(&pdev->dev, cam->irq, mmpcam_irq, IRQF_SHARED,
"mmp-camera", mcam);
if (ret == 0) {
mmpcam_add_device(cam);
return 0;
}
out_unregister:
mccic_shutdown(mcam);
out_power_down:
mmpcam_power_down(mcam);
return ret;
}
static int mmpcam_remove(struct mmp_camera *cam)
{
struct mcam_camera *mcam = &cam->mcam;
mmpcam_remove_device(cam);
mccic_shutdown(mcam);
mmpcam_power_down(mcam);
return 0;
}
static int mmpcam_platform_remove(struct platform_device *pdev)
{
struct mmp_camera *cam = mmpcam_find_device(pdev);
if (cam == NULL)
return -ENODEV;
return mmpcam_remove(cam);
}
/*
* Suspend/resume support.
*/
#ifdef CONFIG_PM
static int mmpcam_suspend(struct platform_device *pdev, pm_message_t state)
{
struct mmp_camera *cam = mmpcam_find_device(pdev);
if (state.event != PM_EVENT_SUSPEND)
return 0;
mccic_suspend(&cam->mcam);
return 0;
}
static int mmpcam_resume(struct platform_device *pdev)
{
struct mmp_camera *cam = mmpcam_find_device(pdev);
/*
* Power up unconditionally just in case the core tries to
* touch a register even if nothing was active before; trust
* me, it's better this way.
*/
mmpcam_power_up_ctlr(cam);
return mccic_resume(&cam->mcam);
}
#endif
static struct platform_driver mmpcam_driver = {
.probe = mmpcam_probe,
.remove = mmpcam_platform_remove,
#ifdef CONFIG_PM
.suspend = mmpcam_suspend,
.resume = mmpcam_resume,
#endif
.driver = {
.name = "mmp-camera",
}
};
static int __init mmpcam_init_module(void)
{
mutex_init(&mmpcam_devices_lock);
return platform_driver_register(&mmpcam_driver);
}
static void __exit mmpcam_exit_module(void)
{
platform_driver_unregister(&mmpcam_driver);
/*
* platform_driver_unregister() should have emptied the list
*/
if (!list_empty(&mmpcam_devices))
printk(KERN_ERR "mmp_camera leaving devices behind\n");
}
module_init(mmpcam_init_module);
module_exit(mmpcam_exit_module);