mirror of https://gitee.com/openkylin/linux.git
869 lines
17 KiB
ArmAsm
869 lines
17 KiB
ArmAsm
/*
|
|
* This file contains miscellaneous low-level functions.
|
|
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
|
|
*
|
|
* Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
|
|
* and Paul Mackerras.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/sys.h>
|
|
#include <asm/unistd.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/page.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/cputable.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/asm-offsets.h>
|
|
|
|
#ifdef CONFIG_8xx
|
|
#define ISYNC_8xx isync
|
|
#else
|
|
#define ISYNC_8xx
|
|
#endif
|
|
.text
|
|
|
|
.align 5
|
|
_GLOBAL(__delay)
|
|
cmpwi 0,r3,0
|
|
mtctr r3
|
|
beqlr
|
|
1: bdnz 1b
|
|
blr
|
|
|
|
/*
|
|
* Returns (address we're running at) - (address we were linked at)
|
|
* for use before the text and data are mapped to KERNELBASE.
|
|
*/
|
|
_GLOBAL(reloc_offset)
|
|
mflr r0
|
|
bl 1f
|
|
1: mflr r3
|
|
lis r4,1b@ha
|
|
addi r4,r4,1b@l
|
|
subf r3,r4,r3
|
|
mtlr r0
|
|
blr
|
|
|
|
/*
|
|
* add_reloc_offset(x) returns x + reloc_offset().
|
|
*/
|
|
_GLOBAL(add_reloc_offset)
|
|
mflr r0
|
|
bl 1f
|
|
1: mflr r5
|
|
lis r4,1b@ha
|
|
addi r4,r4,1b@l
|
|
subf r5,r4,r5
|
|
add r3,r3,r5
|
|
mtlr r0
|
|
blr
|
|
|
|
/*
|
|
* sub_reloc_offset(x) returns x - reloc_offset().
|
|
*/
|
|
_GLOBAL(sub_reloc_offset)
|
|
mflr r0
|
|
bl 1f
|
|
1: mflr r5
|
|
lis r4,1b@ha
|
|
addi r4,r4,1b@l
|
|
subf r5,r4,r5
|
|
subf r3,r5,r3
|
|
mtlr r0
|
|
blr
|
|
|
|
/*
|
|
* reloc_got2 runs through the .got2 section adding an offset
|
|
* to each entry.
|
|
*/
|
|
_GLOBAL(reloc_got2)
|
|
mflr r11
|
|
lis r7,__got2_start@ha
|
|
addi r7,r7,__got2_start@l
|
|
lis r8,__got2_end@ha
|
|
addi r8,r8,__got2_end@l
|
|
subf r8,r7,r8
|
|
srwi. r8,r8,2
|
|
beqlr
|
|
mtctr r8
|
|
bl 1f
|
|
1: mflr r0
|
|
lis r4,1b@ha
|
|
addi r4,r4,1b@l
|
|
subf r0,r4,r0
|
|
add r7,r0,r7
|
|
2: lwz r0,0(r7)
|
|
add r0,r0,r3
|
|
stw r0,0(r7)
|
|
addi r7,r7,4
|
|
bdnz 2b
|
|
mtlr r11
|
|
blr
|
|
|
|
/*
|
|
* call_setup_cpu - call the setup_cpu function for this cpu
|
|
* r3 = data offset, r24 = cpu number
|
|
*
|
|
* Setup function is called with:
|
|
* r3 = data offset
|
|
* r4 = ptr to CPU spec (relocated)
|
|
*/
|
|
_GLOBAL(call_setup_cpu)
|
|
addis r4,r3,cur_cpu_spec@ha
|
|
addi r4,r4,cur_cpu_spec@l
|
|
lwz r4,0(r4)
|
|
add r4,r4,r3
|
|
lwz r5,CPU_SPEC_SETUP(r4)
|
|
cmpi 0,r5,0
|
|
add r5,r5,r3
|
|
beqlr
|
|
mtctr r5
|
|
bctr
|
|
|
|
/*
|
|
* complement mask on the msr then "or" some values on.
|
|
* _nmask_and_or_msr(nmask, value_to_or)
|
|
*/
|
|
_GLOBAL(_nmask_and_or_msr)
|
|
mfmsr r0 /* Get current msr */
|
|
andc r0,r0,r3 /* And off the bits set in r3 (first parm) */
|
|
or r0,r0,r4 /* Or on the bits in r4 (second parm) */
|
|
SYNC /* Some chip revs have problems here... */
|
|
mtmsr r0 /* Update machine state */
|
|
isync
|
|
blr /* Done */
|
|
|
|
|
|
/*
|
|
* Flush MMU TLB
|
|
*/
|
|
_GLOBAL(_tlbia)
|
|
#if defined(CONFIG_40x)
|
|
sync /* Flush to memory before changing mapping */
|
|
tlbia
|
|
isync /* Flush shadow TLB */
|
|
#elif defined(CONFIG_44x)
|
|
li r3,0
|
|
sync
|
|
|
|
/* Load high watermark */
|
|
lis r4,tlb_44x_hwater@ha
|
|
lwz r5,tlb_44x_hwater@l(r4)
|
|
|
|
1: tlbwe r3,r3,PPC44x_TLB_PAGEID
|
|
addi r3,r3,1
|
|
cmpw 0,r3,r5
|
|
ble 1b
|
|
|
|
isync
|
|
#else /* !(CONFIG_40x || CONFIG_44x) */
|
|
#if defined(CONFIG_SMP)
|
|
rlwinm r8,r1,0,0,18
|
|
lwz r8,TI_CPU(r8)
|
|
oris r8,r8,10
|
|
mfmsr r10
|
|
SYNC
|
|
rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */
|
|
rlwinm r0,r0,0,28,26 /* clear DR */
|
|
mtmsr r0
|
|
SYNC_601
|
|
isync
|
|
lis r9,mmu_hash_lock@h
|
|
ori r9,r9,mmu_hash_lock@l
|
|
tophys(r9,r9)
|
|
10: lwarx r7,0,r9
|
|
cmpwi 0,r7,0
|
|
bne- 10b
|
|
stwcx. r8,0,r9
|
|
bne- 10b
|
|
sync
|
|
tlbia
|
|
sync
|
|
TLBSYNC
|
|
li r0,0
|
|
stw r0,0(r9) /* clear mmu_hash_lock */
|
|
mtmsr r10
|
|
SYNC_601
|
|
isync
|
|
#else /* CONFIG_SMP */
|
|
sync
|
|
tlbia
|
|
sync
|
|
#endif /* CONFIG_SMP */
|
|
#endif /* ! defined(CONFIG_40x) */
|
|
blr
|
|
|
|
/*
|
|
* Flush MMU TLB for a particular address
|
|
*/
|
|
_GLOBAL(_tlbie)
|
|
#if defined(CONFIG_40x)
|
|
/* We run the search with interrupts disabled because we have to change
|
|
* the PID and I don't want to preempt when that happens.
|
|
*/
|
|
mfmsr r5
|
|
mfspr r6,SPRN_PID
|
|
wrteei 0
|
|
mtspr SPRN_PID,r4
|
|
tlbsx. r3, 0, r3
|
|
mtspr SPRN_PID,r6
|
|
wrtee r5
|
|
bne 10f
|
|
sync
|
|
/* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear.
|
|
* Since 25 is the V bit in the TLB_TAG, loading this value will invalidate
|
|
* the TLB entry. */
|
|
tlbwe r3, r3, TLB_TAG
|
|
isync
|
|
10:
|
|
#elif defined(CONFIG_44x)
|
|
mfspr r5,SPRN_MMUCR
|
|
rlwimi r5,r4,0,24,31 /* Set TID */
|
|
|
|
/* We have to run the search with interrupts disabled, even critical
|
|
* and debug interrupts (in fact the only critical exceptions we have
|
|
* are debug and machine check). Otherwise an interrupt which causes
|
|
* a TLB miss can clobber the MMUCR between the mtspr and the tlbsx. */
|
|
mfmsr r4
|
|
lis r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@ha
|
|
addi r6,r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l
|
|
andc r6,r4,r6
|
|
mtmsr r6
|
|
mtspr SPRN_MMUCR,r5
|
|
tlbsx. r3, 0, r3
|
|
mtmsr r4
|
|
bne 10f
|
|
sync
|
|
/* There are only 64 TLB entries, so r3 < 64,
|
|
* which means bit 22, is clear. Since 22 is
|
|
* the V bit in the TLB_PAGEID, loading this
|
|
* value will invalidate the TLB entry.
|
|
*/
|
|
tlbwe r3, r3, PPC44x_TLB_PAGEID
|
|
isync
|
|
10:
|
|
#else /* !(CONFIG_40x || CONFIG_44x) */
|
|
#if defined(CONFIG_SMP)
|
|
rlwinm r8,r1,0,0,18
|
|
lwz r8,TI_CPU(r8)
|
|
oris r8,r8,11
|
|
mfmsr r10
|
|
SYNC
|
|
rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */
|
|
rlwinm r0,r0,0,28,26 /* clear DR */
|
|
mtmsr r0
|
|
SYNC_601
|
|
isync
|
|
lis r9,mmu_hash_lock@h
|
|
ori r9,r9,mmu_hash_lock@l
|
|
tophys(r9,r9)
|
|
10: lwarx r7,0,r9
|
|
cmpwi 0,r7,0
|
|
bne- 10b
|
|
stwcx. r8,0,r9
|
|
bne- 10b
|
|
eieio
|
|
tlbie r3
|
|
sync
|
|
TLBSYNC
|
|
li r0,0
|
|
stw r0,0(r9) /* clear mmu_hash_lock */
|
|
mtmsr r10
|
|
SYNC_601
|
|
isync
|
|
#else /* CONFIG_SMP */
|
|
tlbie r3
|
|
sync
|
|
#endif /* CONFIG_SMP */
|
|
#endif /* ! CONFIG_40x */
|
|
blr
|
|
|
|
/*
|
|
* Flush instruction cache.
|
|
* This is a no-op on the 601.
|
|
*/
|
|
_GLOBAL(flush_instruction_cache)
|
|
#if defined(CONFIG_8xx)
|
|
isync
|
|
lis r5, IDC_INVALL@h
|
|
mtspr SPRN_IC_CST, r5
|
|
#elif defined(CONFIG_4xx)
|
|
#ifdef CONFIG_403GCX
|
|
li r3, 512
|
|
mtctr r3
|
|
lis r4, KERNELBASE@h
|
|
1: iccci 0, r4
|
|
addi r4, r4, 16
|
|
bdnz 1b
|
|
#else
|
|
lis r3, KERNELBASE@h
|
|
iccci 0,r3
|
|
#endif
|
|
#else
|
|
mfspr r3,SPRN_PVR
|
|
rlwinm r3,r3,16,16,31
|
|
cmpwi 0,r3,1
|
|
beqlr /* for 601, do nothing */
|
|
/* 603/604 processor - use invalidate-all bit in HID0 */
|
|
mfspr r3,SPRN_HID0
|
|
ori r3,r3,HID0_ICFI
|
|
mtspr SPRN_HID0,r3
|
|
#endif /* CONFIG_8xx/4xx */
|
|
isync
|
|
blr
|
|
|
|
/*
|
|
* Write any modified data cache blocks out to memory
|
|
* and invalidate the corresponding instruction cache blocks.
|
|
* This is a no-op on the 601.
|
|
*
|
|
* __flush_icache_range(unsigned long start, unsigned long stop)
|
|
*/
|
|
_GLOBAL(__flush_icache_range)
|
|
BEGIN_FTR_SECTION
|
|
blr /* for 601, do nothing */
|
|
END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
|
|
li r5,L1_CACHE_BYTES-1
|
|
andc r3,r3,r5
|
|
subf r4,r3,r4
|
|
add r4,r4,r5
|
|
srwi. r4,r4,L1_CACHE_SHIFT
|
|
beqlr
|
|
mtctr r4
|
|
mr r6,r3
|
|
1: dcbst 0,r3
|
|
addi r3,r3,L1_CACHE_BYTES
|
|
bdnz 1b
|
|
sync /* wait for dcbst's to get to ram */
|
|
mtctr r4
|
|
2: icbi 0,r6
|
|
addi r6,r6,L1_CACHE_BYTES
|
|
bdnz 2b
|
|
sync /* additional sync needed on g4 */
|
|
isync
|
|
blr
|
|
/*
|
|
* Write any modified data cache blocks out to memory.
|
|
* Does not invalidate the corresponding cache lines (especially for
|
|
* any corresponding instruction cache).
|
|
*
|
|
* clean_dcache_range(unsigned long start, unsigned long stop)
|
|
*/
|
|
_GLOBAL(clean_dcache_range)
|
|
li r5,L1_CACHE_BYTES-1
|
|
andc r3,r3,r5
|
|
subf r4,r3,r4
|
|
add r4,r4,r5
|
|
srwi. r4,r4,L1_CACHE_SHIFT
|
|
beqlr
|
|
mtctr r4
|
|
|
|
1: dcbst 0,r3
|
|
addi r3,r3,L1_CACHE_BYTES
|
|
bdnz 1b
|
|
sync /* wait for dcbst's to get to ram */
|
|
blr
|
|
|
|
/*
|
|
* Write any modified data cache blocks out to memory and invalidate them.
|
|
* Does not invalidate the corresponding instruction cache blocks.
|
|
*
|
|
* flush_dcache_range(unsigned long start, unsigned long stop)
|
|
*/
|
|
_GLOBAL(flush_dcache_range)
|
|
li r5,L1_CACHE_BYTES-1
|
|
andc r3,r3,r5
|
|
subf r4,r3,r4
|
|
add r4,r4,r5
|
|
srwi. r4,r4,L1_CACHE_SHIFT
|
|
beqlr
|
|
mtctr r4
|
|
|
|
1: dcbf 0,r3
|
|
addi r3,r3,L1_CACHE_BYTES
|
|
bdnz 1b
|
|
sync /* wait for dcbst's to get to ram */
|
|
blr
|
|
|
|
/*
|
|
* Like above, but invalidate the D-cache. This is used by the 8xx
|
|
* to invalidate the cache so the PPC core doesn't get stale data
|
|
* from the CPM (no cache snooping here :-).
|
|
*
|
|
* invalidate_dcache_range(unsigned long start, unsigned long stop)
|
|
*/
|
|
_GLOBAL(invalidate_dcache_range)
|
|
li r5,L1_CACHE_BYTES-1
|
|
andc r3,r3,r5
|
|
subf r4,r3,r4
|
|
add r4,r4,r5
|
|
srwi. r4,r4,L1_CACHE_SHIFT
|
|
beqlr
|
|
mtctr r4
|
|
|
|
1: dcbi 0,r3
|
|
addi r3,r3,L1_CACHE_BYTES
|
|
bdnz 1b
|
|
sync /* wait for dcbi's to get to ram */
|
|
blr
|
|
|
|
#ifdef CONFIG_NOT_COHERENT_CACHE
|
|
/*
|
|
* 40x cores have 8K or 16K dcache and 32 byte line size.
|
|
* 44x has a 32K dcache and 32 byte line size.
|
|
* 8xx has 1, 2, 4, 8K variants.
|
|
* For now, cover the worst case of the 44x.
|
|
* Must be called with external interrupts disabled.
|
|
*/
|
|
#define CACHE_NWAYS 64
|
|
#define CACHE_NLINES 16
|
|
|
|
_GLOBAL(flush_dcache_all)
|
|
li r4, (2 * CACHE_NWAYS * CACHE_NLINES)
|
|
mtctr r4
|
|
lis r5, KERNELBASE@h
|
|
1: lwz r3, 0(r5) /* Load one word from every line */
|
|
addi r5, r5, L1_CACHE_BYTES
|
|
bdnz 1b
|
|
blr
|
|
#endif /* CONFIG_NOT_COHERENT_CACHE */
|
|
|
|
/*
|
|
* Flush a particular page from the data cache to RAM.
|
|
* Note: this is necessary because the instruction cache does *not*
|
|
* snoop from the data cache.
|
|
* This is a no-op on the 601 which has a unified cache.
|
|
*
|
|
* void __flush_dcache_icache(void *page)
|
|
*/
|
|
_GLOBAL(__flush_dcache_icache)
|
|
BEGIN_FTR_SECTION
|
|
blr /* for 601, do nothing */
|
|
END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
|
|
rlwinm r3,r3,0,0,19 /* Get page base address */
|
|
li r4,4096/L1_CACHE_BYTES /* Number of lines in a page */
|
|
mtctr r4
|
|
mr r6,r3
|
|
0: dcbst 0,r3 /* Write line to ram */
|
|
addi r3,r3,L1_CACHE_BYTES
|
|
bdnz 0b
|
|
sync
|
|
#ifndef CONFIG_44x
|
|
/* We don't flush the icache on 44x. Those have a virtual icache
|
|
* and we don't have access to the virtual address here (it's
|
|
* not the page vaddr but where it's mapped in user space). The
|
|
* flushing of the icache on these is handled elsewhere, when
|
|
* a change in the address space occurs, before returning to
|
|
* user space
|
|
*/
|
|
mtctr r4
|
|
1: icbi 0,r6
|
|
addi r6,r6,L1_CACHE_BYTES
|
|
bdnz 1b
|
|
sync
|
|
isync
|
|
#endif /* CONFIG_44x */
|
|
blr
|
|
|
|
/*
|
|
* Flush a particular page from the data cache to RAM, identified
|
|
* by its physical address. We turn off the MMU so we can just use
|
|
* the physical address (this may be a highmem page without a kernel
|
|
* mapping).
|
|
*
|
|
* void __flush_dcache_icache_phys(unsigned long physaddr)
|
|
*/
|
|
_GLOBAL(__flush_dcache_icache_phys)
|
|
BEGIN_FTR_SECTION
|
|
blr /* for 601, do nothing */
|
|
END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
|
|
mfmsr r10
|
|
rlwinm r0,r10,0,28,26 /* clear DR */
|
|
mtmsr r0
|
|
isync
|
|
rlwinm r3,r3,0,0,19 /* Get page base address */
|
|
li r4,4096/L1_CACHE_BYTES /* Number of lines in a page */
|
|
mtctr r4
|
|
mr r6,r3
|
|
0: dcbst 0,r3 /* Write line to ram */
|
|
addi r3,r3,L1_CACHE_BYTES
|
|
bdnz 0b
|
|
sync
|
|
mtctr r4
|
|
1: icbi 0,r6
|
|
addi r6,r6,L1_CACHE_BYTES
|
|
bdnz 1b
|
|
sync
|
|
mtmsr r10 /* restore DR */
|
|
isync
|
|
blr
|
|
|
|
/*
|
|
* Clear pages using the dcbz instruction, which doesn't cause any
|
|
* memory traffic (except to write out any cache lines which get
|
|
* displaced). This only works on cacheable memory.
|
|
*
|
|
* void clear_pages(void *page, int order) ;
|
|
*/
|
|
_GLOBAL(clear_pages)
|
|
li r0,4096/L1_CACHE_BYTES
|
|
slw r0,r0,r4
|
|
mtctr r0
|
|
#ifdef CONFIG_8xx
|
|
li r4, 0
|
|
1: stw r4, 0(r3)
|
|
stw r4, 4(r3)
|
|
stw r4, 8(r3)
|
|
stw r4, 12(r3)
|
|
#else
|
|
1: dcbz 0,r3
|
|
#endif
|
|
addi r3,r3,L1_CACHE_BYTES
|
|
bdnz 1b
|
|
blr
|
|
|
|
/*
|
|
* Copy a whole page. We use the dcbz instruction on the destination
|
|
* to reduce memory traffic (it eliminates the unnecessary reads of
|
|
* the destination into cache). This requires that the destination
|
|
* is cacheable.
|
|
*/
|
|
#define COPY_16_BYTES \
|
|
lwz r6,4(r4); \
|
|
lwz r7,8(r4); \
|
|
lwz r8,12(r4); \
|
|
lwzu r9,16(r4); \
|
|
stw r6,4(r3); \
|
|
stw r7,8(r3); \
|
|
stw r8,12(r3); \
|
|
stwu r9,16(r3)
|
|
|
|
_GLOBAL(copy_page)
|
|
addi r3,r3,-4
|
|
addi r4,r4,-4
|
|
|
|
#ifdef CONFIG_8xx
|
|
/* don't use prefetch on 8xx */
|
|
li r0,4096/L1_CACHE_BYTES
|
|
mtctr r0
|
|
1: COPY_16_BYTES
|
|
bdnz 1b
|
|
blr
|
|
|
|
#else /* not 8xx, we can prefetch */
|
|
li r5,4
|
|
|
|
#if MAX_COPY_PREFETCH > 1
|
|
li r0,MAX_COPY_PREFETCH
|
|
li r11,4
|
|
mtctr r0
|
|
11: dcbt r11,r4
|
|
addi r11,r11,L1_CACHE_BYTES
|
|
bdnz 11b
|
|
#else /* MAX_COPY_PREFETCH == 1 */
|
|
dcbt r5,r4
|
|
li r11,L1_CACHE_BYTES+4
|
|
#endif /* MAX_COPY_PREFETCH */
|
|
li r0,4096/L1_CACHE_BYTES - MAX_COPY_PREFETCH
|
|
crclr 4*cr0+eq
|
|
2:
|
|
mtctr r0
|
|
1:
|
|
dcbt r11,r4
|
|
dcbz r5,r3
|
|
COPY_16_BYTES
|
|
#if L1_CACHE_BYTES >= 32
|
|
COPY_16_BYTES
|
|
#if L1_CACHE_BYTES >= 64
|
|
COPY_16_BYTES
|
|
COPY_16_BYTES
|
|
#if L1_CACHE_BYTES >= 128
|
|
COPY_16_BYTES
|
|
COPY_16_BYTES
|
|
COPY_16_BYTES
|
|
COPY_16_BYTES
|
|
#endif
|
|
#endif
|
|
#endif
|
|
bdnz 1b
|
|
beqlr
|
|
crnot 4*cr0+eq,4*cr0+eq
|
|
li r0,MAX_COPY_PREFETCH
|
|
li r11,4
|
|
b 2b
|
|
#endif /* CONFIG_8xx */
|
|
|
|
/*
|
|
* void atomic_clear_mask(atomic_t mask, atomic_t *addr)
|
|
* void atomic_set_mask(atomic_t mask, atomic_t *addr);
|
|
*/
|
|
_GLOBAL(atomic_clear_mask)
|
|
10: lwarx r5,0,r4
|
|
andc r5,r5,r3
|
|
PPC405_ERR77(0,r4)
|
|
stwcx. r5,0,r4
|
|
bne- 10b
|
|
blr
|
|
_GLOBAL(atomic_set_mask)
|
|
10: lwarx r5,0,r4
|
|
or r5,r5,r3
|
|
PPC405_ERR77(0,r4)
|
|
stwcx. r5,0,r4
|
|
bne- 10b
|
|
blr
|
|
|
|
/*
|
|
* I/O string operations
|
|
*
|
|
* insb(port, buf, len)
|
|
* outsb(port, buf, len)
|
|
* insw(port, buf, len)
|
|
* outsw(port, buf, len)
|
|
* insl(port, buf, len)
|
|
* outsl(port, buf, len)
|
|
* insw_ns(port, buf, len)
|
|
* outsw_ns(port, buf, len)
|
|
* insl_ns(port, buf, len)
|
|
* outsl_ns(port, buf, len)
|
|
*
|
|
* The *_ns versions don't do byte-swapping.
|
|
*/
|
|
_GLOBAL(_insb)
|
|
cmpwi 0,r5,0
|
|
mtctr r5
|
|
subi r4,r4,1
|
|
blelr-
|
|
00: lbz r5,0(r3)
|
|
01: eieio
|
|
02: stbu r5,1(r4)
|
|
ISYNC_8xx
|
|
.section .fixup,"ax"
|
|
03: blr
|
|
.text
|
|
.section __ex_table, "a"
|
|
.align 2
|
|
.long 00b, 03b
|
|
.long 01b, 03b
|
|
.long 02b, 03b
|
|
.text
|
|
bdnz 00b
|
|
blr
|
|
|
|
_GLOBAL(_outsb)
|
|
cmpwi 0,r5,0
|
|
mtctr r5
|
|
subi r4,r4,1
|
|
blelr-
|
|
00: lbzu r5,1(r4)
|
|
01: stb r5,0(r3)
|
|
02: eieio
|
|
ISYNC_8xx
|
|
.section .fixup,"ax"
|
|
03: blr
|
|
.text
|
|
.section __ex_table, "a"
|
|
.align 2
|
|
.long 00b, 03b
|
|
.long 01b, 03b
|
|
.long 02b, 03b
|
|
.text
|
|
bdnz 00b
|
|
blr
|
|
|
|
_GLOBAL(_insw_ns)
|
|
cmpwi 0,r5,0
|
|
mtctr r5
|
|
subi r4,r4,2
|
|
blelr-
|
|
00: lhz r5,0(r3)
|
|
01: eieio
|
|
02: sthu r5,2(r4)
|
|
ISYNC_8xx
|
|
.section .fixup,"ax"
|
|
03: blr
|
|
.text
|
|
.section __ex_table, "a"
|
|
.align 2
|
|
.long 00b, 03b
|
|
.long 01b, 03b
|
|
.long 02b, 03b
|
|
.text
|
|
bdnz 00b
|
|
blr
|
|
|
|
_GLOBAL(_outsw_ns)
|
|
cmpwi 0,r5,0
|
|
mtctr r5
|
|
subi r4,r4,2
|
|
blelr-
|
|
00: lhzu r5,2(r4)
|
|
01: sth r5,0(r3)
|
|
02: eieio
|
|
ISYNC_8xx
|
|
.section .fixup,"ax"
|
|
03: blr
|
|
.text
|
|
.section __ex_table, "a"
|
|
.align 2
|
|
.long 00b, 03b
|
|
.long 01b, 03b
|
|
.long 02b, 03b
|
|
.text
|
|
bdnz 00b
|
|
blr
|
|
|
|
_GLOBAL(_insl_ns)
|
|
cmpwi 0,r5,0
|
|
mtctr r5
|
|
subi r4,r4,4
|
|
blelr-
|
|
00: lwz r5,0(r3)
|
|
01: eieio
|
|
02: stwu r5,4(r4)
|
|
ISYNC_8xx
|
|
.section .fixup,"ax"
|
|
03: blr
|
|
.text
|
|
.section __ex_table, "a"
|
|
.align 2
|
|
.long 00b, 03b
|
|
.long 01b, 03b
|
|
.long 02b, 03b
|
|
.text
|
|
bdnz 00b
|
|
blr
|
|
|
|
_GLOBAL(_outsl_ns)
|
|
cmpwi 0,r5,0
|
|
mtctr r5
|
|
subi r4,r4,4
|
|
blelr-
|
|
00: lwzu r5,4(r4)
|
|
01: stw r5,0(r3)
|
|
02: eieio
|
|
ISYNC_8xx
|
|
.section .fixup,"ax"
|
|
03: blr
|
|
.text
|
|
.section __ex_table, "a"
|
|
.align 2
|
|
.long 00b, 03b
|
|
.long 01b, 03b
|
|
.long 02b, 03b
|
|
.text
|
|
bdnz 00b
|
|
blr
|
|
|
|
/*
|
|
* Extended precision shifts.
|
|
*
|
|
* Updated to be valid for shift counts from 0 to 63 inclusive.
|
|
* -- Gabriel
|
|
*
|
|
* R3/R4 has 64 bit value
|
|
* R5 has shift count
|
|
* result in R3/R4
|
|
*
|
|
* ashrdi3: arithmetic right shift (sign propagation)
|
|
* lshrdi3: logical right shift
|
|
* ashldi3: left shift
|
|
*/
|
|
_GLOBAL(__ashrdi3)
|
|
subfic r6,r5,32
|
|
srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count
|
|
addi r7,r5,32 # could be xori, or addi with -32
|
|
slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count)
|
|
rlwinm r8,r7,0,32 # t3 = (count < 32) ? 32 : 0
|
|
sraw r7,r3,r7 # t2 = MSW >> (count-32)
|
|
or r4,r4,r6 # LSW |= t1
|
|
slw r7,r7,r8 # t2 = (count < 32) ? 0 : t2
|
|
sraw r3,r3,r5 # MSW = MSW >> count
|
|
or r4,r4,r7 # LSW |= t2
|
|
blr
|
|
|
|
_GLOBAL(__ashldi3)
|
|
subfic r6,r5,32
|
|
slw r3,r3,r5 # MSW = count > 31 ? 0 : MSW << count
|
|
addi r7,r5,32 # could be xori, or addi with -32
|
|
srw r6,r4,r6 # t1 = count > 31 ? 0 : LSW >> (32-count)
|
|
slw r7,r4,r7 # t2 = count < 32 ? 0 : LSW << (count-32)
|
|
or r3,r3,r6 # MSW |= t1
|
|
slw r4,r4,r5 # LSW = LSW << count
|
|
or r3,r3,r7 # MSW |= t2
|
|
blr
|
|
|
|
_GLOBAL(__lshrdi3)
|
|
subfic r6,r5,32
|
|
srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count
|
|
addi r7,r5,32 # could be xori, or addi with -32
|
|
slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count)
|
|
srw r7,r3,r7 # t2 = count < 32 ? 0 : MSW >> (count-32)
|
|
or r4,r4,r6 # LSW |= t1
|
|
srw r3,r3,r5 # MSW = MSW >> count
|
|
or r4,r4,r7 # LSW |= t2
|
|
blr
|
|
|
|
_GLOBAL(abs)
|
|
srawi r4,r3,31
|
|
xor r3,r3,r4
|
|
sub r3,r3,r4
|
|
blr
|
|
|
|
_GLOBAL(_get_SP)
|
|
mr r3,r1 /* Close enough */
|
|
blr
|
|
|
|
/*
|
|
* Create a kernel thread
|
|
* kernel_thread(fn, arg, flags)
|
|
*/
|
|
_GLOBAL(kernel_thread)
|
|
stwu r1,-16(r1)
|
|
stw r30,8(r1)
|
|
stw r31,12(r1)
|
|
mr r30,r3 /* function */
|
|
mr r31,r4 /* argument */
|
|
ori r3,r5,CLONE_VM /* flags */
|
|
oris r3,r3,CLONE_UNTRACED>>16
|
|
li r4,0 /* new sp (unused) */
|
|
li r0,__NR_clone
|
|
sc
|
|
cmpwi 0,r3,0 /* parent or child? */
|
|
bne 1f /* return if parent */
|
|
li r0,0 /* make top-level stack frame */
|
|
stwu r0,-16(r1)
|
|
mtlr r30 /* fn addr in lr */
|
|
mr r3,r31 /* load arg and call fn */
|
|
PPC440EP_ERR42
|
|
blrl
|
|
li r0,__NR_exit /* exit if function returns */
|
|
li r3,0
|
|
sc
|
|
1: lwz r30,8(r1)
|
|
lwz r31,12(r1)
|
|
addi r1,r1,16
|
|
blr
|
|
|
|
_GLOBAL(kernel_execve)
|
|
li r0,__NR_execve
|
|
sc
|
|
bnslr
|
|
neg r3,r3
|
|
blr
|
|
|
|
/*
|
|
* This routine is just here to keep GCC happy - sigh...
|
|
*/
|
|
_GLOBAL(__main)
|
|
blr
|
|
|