linux/Documentation/devicetree/bindings/i2c/i2c-rcar.txt

54 lines
2.1 KiB
Plaintext

I2C for R-Car platforms
Required properties:
- compatible:
"renesas,i2c-r8a7743" if the device is a part of a R8A7743 SoC.
"renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC.
"renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC.
"renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC.
"renesas,i2c-r8a7790" if the device is a part of a R8A7790 SoC.
"renesas,i2c-r8a7791" if the device is a part of a R8A7791 SoC.
"renesas,i2c-r8a7792" if the device is a part of a R8A7792 SoC.
"renesas,i2c-r8a7793" if the device is a part of a R8A7793 SoC.
"renesas,i2c-r8a7794" if the device is a part of a R8A7794 SoC.
"renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC.
"renesas,i2c-r8a7796" if the device is a part of a R8A7796 SoC.
"renesas,i2c-r8a77970" if the device is a part of a R8A77970 SoC.
"renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device.
"renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible
device.
"renesas,rcar-gen3-i2c" for a generic R-Car Gen3 compatible device.
"renesas,i2c-rcar" (deprecated)
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first followed
by the generic version.
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt specifier.
Optional properties:
- clock-frequency: desired I2C bus clock frequency in Hz. The absence of this
property indicates the default frequency 100 kHz.
- clocks: clock specifier.
- dmas: Must contain a list of two references to DMA specifiers, one for
transmission, and one for reception.
- dma-names: Must contain a list of two DMA names, "tx" and "rx".
- i2c-scl-falling-time-ns: see i2c.txt
- i2c-scl-internal-delay-ns: see i2c.txt
- i2c-scl-rising-time-ns: see i2c.txt
Examples :
i2c0: i2c@e6508000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
reg = <0 0xe6508000 0 0x40>;
interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
clock-frequency = <400000>;
};