mirror of https://gitee.com/openkylin/linux.git
357 lines
12 KiB
C
357 lines
12 KiB
C
/*
|
|
* Copyright (c) 2004-2010 Atheros Communications Inc.
|
|
* Copyright (c) 2011 Qualcomm Atheros, Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#ifndef TARGET_H
|
|
#define TARGET_H
|
|
|
|
#define AR6003_BOARD_DATA_SZ 1024
|
|
#define AR6003_BOARD_EXT_DATA_SZ 768
|
|
#define AR6003_BOARD_EXT_DATA_SZ_V2 1024
|
|
|
|
#define AR6004_BOARD_DATA_SZ 6144
|
|
#define AR6004_BOARD_EXT_DATA_SZ 0
|
|
|
|
#define RESET_CONTROL_ADDRESS 0x00004000
|
|
#define RESET_CONTROL_COLD_RST 0x00000100
|
|
#define RESET_CONTROL_MBOX_RST 0x00000004
|
|
|
|
#define CPU_CLOCK_STANDARD_S 0
|
|
#define CPU_CLOCK_STANDARD 0x00000003
|
|
#define CPU_CLOCK_ADDRESS 0x00000020
|
|
|
|
#define CLOCK_CONTROL_ADDRESS 0x00000028
|
|
#define CLOCK_CONTROL_LF_CLK32_S 2
|
|
#define CLOCK_CONTROL_LF_CLK32 0x00000004
|
|
|
|
#define SYSTEM_SLEEP_ADDRESS 0x000000c4
|
|
#define SYSTEM_SLEEP_DISABLE_S 0
|
|
#define SYSTEM_SLEEP_DISABLE 0x00000001
|
|
|
|
#define LPO_CAL_ADDRESS 0x000000e0
|
|
#define LPO_CAL_ENABLE_S 20
|
|
#define LPO_CAL_ENABLE 0x00100000
|
|
|
|
#define GPIO_PIN9_ADDRESS 0x0000004c
|
|
#define GPIO_PIN10_ADDRESS 0x00000050
|
|
#define GPIO_PIN11_ADDRESS 0x00000054
|
|
#define GPIO_PIN12_ADDRESS 0x00000058
|
|
#define GPIO_PIN13_ADDRESS 0x0000005c
|
|
|
|
#define HOST_INT_STATUS_ADDRESS 0x00000400
|
|
#define HOST_INT_STATUS_ERROR_S 7
|
|
#define HOST_INT_STATUS_ERROR 0x00000080
|
|
|
|
#define HOST_INT_STATUS_CPU_S 6
|
|
#define HOST_INT_STATUS_CPU 0x00000040
|
|
|
|
#define HOST_INT_STATUS_COUNTER_S 4
|
|
#define HOST_INT_STATUS_COUNTER 0x00000010
|
|
|
|
#define CPU_INT_STATUS_ADDRESS 0x00000401
|
|
|
|
#define ERROR_INT_STATUS_ADDRESS 0x00000402
|
|
#define ERROR_INT_STATUS_WAKEUP_S 2
|
|
#define ERROR_INT_STATUS_WAKEUP 0x00000004
|
|
|
|
#define ERROR_INT_STATUS_RX_UNDERFLOW_S 1
|
|
#define ERROR_INT_STATUS_RX_UNDERFLOW 0x00000002
|
|
|
|
#define ERROR_INT_STATUS_TX_OVERFLOW_S 0
|
|
#define ERROR_INT_STATUS_TX_OVERFLOW 0x00000001
|
|
|
|
#define COUNTER_INT_STATUS_ADDRESS 0x00000403
|
|
#define COUNTER_INT_STATUS_COUNTER_S 0
|
|
#define COUNTER_INT_STATUS_COUNTER 0x000000ff
|
|
|
|
#define RX_LOOKAHEAD_VALID_ADDRESS 0x00000405
|
|
|
|
#define INT_STATUS_ENABLE_ADDRESS 0x00000418
|
|
#define INT_STATUS_ENABLE_ERROR_S 7
|
|
#define INT_STATUS_ENABLE_ERROR 0x00000080
|
|
|
|
#define INT_STATUS_ENABLE_CPU_S 6
|
|
#define INT_STATUS_ENABLE_CPU 0x00000040
|
|
|
|
#define INT_STATUS_ENABLE_INT_S 5
|
|
#define INT_STATUS_ENABLE_INT 0x00000020
|
|
#define INT_STATUS_ENABLE_COUNTER_S 4
|
|
#define INT_STATUS_ENABLE_COUNTER 0x00000010
|
|
|
|
#define INT_STATUS_ENABLE_MBOX_DATA_S 0
|
|
#define INT_STATUS_ENABLE_MBOX_DATA 0x0000000f
|
|
|
|
#define CPU_INT_STATUS_ENABLE_ADDRESS 0x00000419
|
|
#define CPU_INT_STATUS_ENABLE_BIT_S 0
|
|
#define CPU_INT_STATUS_ENABLE_BIT 0x000000ff
|
|
|
|
#define ERROR_STATUS_ENABLE_ADDRESS 0x0000041a
|
|
#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_S 1
|
|
#define ERROR_STATUS_ENABLE_RX_UNDERFLOW 0x00000002
|
|
|
|
#define ERROR_STATUS_ENABLE_TX_OVERFLOW_S 0
|
|
#define ERROR_STATUS_ENABLE_TX_OVERFLOW 0x00000001
|
|
|
|
#define COUNTER_INT_STATUS_ENABLE_ADDRESS 0x0000041b
|
|
#define COUNTER_INT_STATUS_ENABLE_BIT_S 0
|
|
#define COUNTER_INT_STATUS_ENABLE_BIT 0x000000ff
|
|
|
|
#define COUNT_ADDRESS 0x00000420
|
|
|
|
#define COUNT_DEC_ADDRESS 0x00000440
|
|
|
|
#define WINDOW_DATA_ADDRESS 0x00000474
|
|
#define WINDOW_WRITE_ADDR_ADDRESS 0x00000478
|
|
#define WINDOW_READ_ADDR_ADDRESS 0x0000047c
|
|
#define CPU_DBG_SEL_ADDRESS 0x00000483
|
|
#define CPU_DBG_ADDRESS 0x00000484
|
|
|
|
#define LOCAL_SCRATCH_ADDRESS 0x000000c0
|
|
#define ATH6KL_OPTION_SLEEP_DISABLE 0x08
|
|
|
|
#define RTC_BASE_ADDRESS 0x00004000
|
|
#define GPIO_BASE_ADDRESS 0x00014000
|
|
#define MBOX_BASE_ADDRESS 0x00018000
|
|
#define ANALOG_INTF_BASE_ADDRESS 0x0001c000
|
|
|
|
/* real name of the register is unknown */
|
|
#define ATH6KL_ANALOG_PLL_REGISTER (ANALOG_INTF_BASE_ADDRESS + 0x284)
|
|
|
|
#define SM(f, v) (((v) << f##_S) & f)
|
|
#define MS(f, v) (((v) & f) >> f##_S)
|
|
|
|
/*
|
|
* xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the
|
|
* host_interest structure.
|
|
*
|
|
* Host Interest is shared between Host and Target in order to coordinate
|
|
* between the two, and is intended to remain constant (with additions only
|
|
* at the end).
|
|
*/
|
|
#define ATH6KL_AR6003_HI_START_ADDR 0x00540600
|
|
#define ATH6KL_AR6004_HI_START_ADDR 0x00400800
|
|
|
|
/*
|
|
* These are items that the Host may need to access
|
|
* via BMI or via the Diagnostic Window. The position
|
|
* of items in this structure must remain constant.
|
|
* across firmware revisions!
|
|
*
|
|
* Types for each item must be fixed size across target and host platforms.
|
|
* The structure is used only to calculate offset for each register with
|
|
* HI_ITEM() macro, no values are stored to it.
|
|
*
|
|
* More items may be added at the end.
|
|
*/
|
|
struct host_interest {
|
|
/*
|
|
* Pointer to application-defined area, if any.
|
|
* Set by Target application during startup.
|
|
*/
|
|
u32 hi_app_host_interest; /* 0x00 */
|
|
|
|
/* Pointer to register dump area, valid after Target crash. */
|
|
u32 hi_failure_state; /* 0x04 */
|
|
|
|
/* Pointer to debug logging header */
|
|
u32 hi_dbglog_hdr; /* 0x08 */
|
|
|
|
u32 hi_unused1; /* 0x0c */
|
|
|
|
/*
|
|
* General-purpose flag bits, similar to ATH6KL_OPTION_* flags.
|
|
* Can be used by application rather than by OS.
|
|
*/
|
|
u32 hi_option_flag; /* 0x10 */
|
|
|
|
/*
|
|
* Boolean that determines whether or not to
|
|
* display messages on the serial port.
|
|
*/
|
|
u32 hi_serial_enable; /* 0x14 */
|
|
|
|
/* Start address of DataSet index, if any */
|
|
u32 hi_dset_list_head; /* 0x18 */
|
|
|
|
/* Override Target application start address */
|
|
u32 hi_app_start; /* 0x1c */
|
|
|
|
/* Clock and voltage tuning */
|
|
u32 hi_skip_clock_init; /* 0x20 */
|
|
u32 hi_core_clock_setting; /* 0x24 */
|
|
u32 hi_cpu_clock_setting; /* 0x28 */
|
|
u32 hi_system_sleep_setting; /* 0x2c */
|
|
u32 hi_xtal_control_setting; /* 0x30 */
|
|
u32 hi_pll_ctrl_setting_24ghz; /* 0x34 */
|
|
u32 hi_pll_ctrl_setting_5ghz; /* 0x38 */
|
|
u32 hi_ref_voltage_trim_setting; /* 0x3c */
|
|
u32 hi_clock_info; /* 0x40 */
|
|
|
|
/*
|
|
* Flash configuration overrides, used only
|
|
* when firmware is not executing from flash.
|
|
* (When using flash, modify the global variables
|
|
* with equivalent names.)
|
|
*/
|
|
u32 hi_bank0_addr_value; /* 0x44 */
|
|
u32 hi_bank0_read_value; /* 0x48 */
|
|
u32 hi_bank0_write_value; /* 0x4c */
|
|
u32 hi_bank0_config_value; /* 0x50 */
|
|
|
|
/* Pointer to Board Data */
|
|
u32 hi_board_data; /* 0x54 */
|
|
u32 hi_board_data_initialized; /* 0x58 */
|
|
|
|
u32 hi_dset_ram_index_tbl; /* 0x5c */
|
|
|
|
u32 hi_desired_baud_rate; /* 0x60 */
|
|
u32 hi_dbglog_config; /* 0x64 */
|
|
u32 hi_end_ram_reserve_sz; /* 0x68 */
|
|
u32 hi_mbox_io_block_sz; /* 0x6c */
|
|
|
|
u32 hi_num_bpatch_streams; /* 0x70 -- unused */
|
|
u32 hi_mbox_isr_yield_limit; /* 0x74 */
|
|
|
|
u32 hi_refclk_hz; /* 0x78 */
|
|
u32 hi_ext_clk_detected; /* 0x7c */
|
|
u32 hi_dbg_uart_txpin; /* 0x80 */
|
|
u32 hi_dbg_uart_rxpin; /* 0x84 */
|
|
u32 hi_hci_uart_baud; /* 0x88 */
|
|
u32 hi_hci_uart_pin_assignments; /* 0x8C */
|
|
/*
|
|
* NOTE: byte [0] = tx pin, [1] = rx pin, [2] = rts pin, [3] = cts
|
|
* pin
|
|
*/
|
|
u32 hi_hci_uart_baud_scale_val; /* 0x90 */
|
|
u32 hi_hci_uart_baud_step_val; /* 0x94 */
|
|
|
|
u32 hi_allocram_start; /* 0x98 */
|
|
u32 hi_allocram_sz; /* 0x9c */
|
|
u32 hi_hci_bridge_flags; /* 0xa0 */
|
|
u32 hi_hci_uart_support_pins; /* 0xa4 */
|
|
/*
|
|
* NOTE: byte [0] = RESET pin (bit 7 is polarity),
|
|
* bytes[1]..bytes[3] are for future use
|
|
*/
|
|
u32 hi_hci_uart_pwr_mgmt_params; /* 0xa8 */
|
|
/*
|
|
* 0xa8 - [1]: 0 = UART FC active low, 1 = UART FC active high
|
|
* [31:16]: wakeup timeout in ms
|
|
*/
|
|
|
|
/* Pointer to extended board data */
|
|
u32 hi_board_ext_data; /* 0xac */
|
|
u32 hi_board_ext_data_config; /* 0xb0 */
|
|
|
|
/*
|
|
* Bit [0] : valid
|
|
* Bit[31:16: size
|
|
*/
|
|
/*
|
|
* hi_reset_flag is used to do some stuff when target reset.
|
|
* such as restore app_start after warm reset or
|
|
* preserve host Interest area, or preserve ROM data, literals etc.
|
|
*/
|
|
u32 hi_reset_flag; /* 0xb4 */
|
|
/* indicate hi_reset_flag is valid */
|
|
u32 hi_reset_flag_valid; /* 0xb8 */
|
|
u32 hi_hci_uart_pwr_mgmt_params_ext; /* 0xbc */
|
|
/*
|
|
* 0xbc - [31:0]: idle timeout in ms
|
|
*/
|
|
/* ACS flags */
|
|
u32 hi_acs_flags; /* 0xc0 */
|
|
u32 hi_console_flags; /* 0xc4 */
|
|
u32 hi_nvram_state; /* 0xc8 */
|
|
u32 hi_option_flag2; /* 0xcc */
|
|
|
|
/* If non-zero, override values sent to Host in WMI_READY event. */
|
|
u32 hi_sw_version_override; /* 0xd0 */
|
|
u32 hi_abi_version_override; /* 0xd4 */
|
|
|
|
/*
|
|
* Percentage of high priority RX traffic to total expected RX traffic -
|
|
* applicable only to ar6004
|
|
*/
|
|
u32 hi_hp_rx_traffic_ratio; /* 0xd8 */
|
|
|
|
/* test applications flags */
|
|
u32 hi_test_apps_related; /* 0xdc */
|
|
/* location of test script */
|
|
u32 hi_ota_testscript; /* 0xe0 */
|
|
/* location of CAL data */
|
|
u32 hi_cal_data; /* 0xe4 */
|
|
/* Number of packet log buffers */
|
|
u32 hi_pktlog_num_buffers; /* 0xe8 */
|
|
|
|
} __packed;
|
|
|
|
#define HI_ITEM(item) offsetof(struct host_interest, item)
|
|
|
|
#define HI_OPTION_MAC_ADDR_METHOD_SHIFT 3
|
|
|
|
#define HI_OPTION_FW_MODE_IBSS 0x0
|
|
#define HI_OPTION_FW_MODE_BSS_STA 0x1
|
|
#define HI_OPTION_FW_MODE_AP 0x2
|
|
|
|
#define HI_OPTION_FW_SUBMODE_NONE 0x0
|
|
#define HI_OPTION_FW_SUBMODE_P2PDEV 0x1
|
|
#define HI_OPTION_FW_SUBMODE_P2PCLIENT 0x2
|
|
#define HI_OPTION_FW_SUBMODE_P2PGO 0x3
|
|
|
|
#define HI_OPTION_NUM_DEV_SHIFT 0x9
|
|
|
|
#define HI_OPTION_FW_BRIDGE_SHIFT 0x04
|
|
|
|
/* Fw Mode/SubMode Mask
|
|
|------------------------------------------------------------------------------|
|
|
| SUB | SUB | SUB | SUB | | | |
|
|
| MODE[3] | MODE[2] | MODE[1] | MODE[0] | MODE[3] | MODE[2] | MODE[1] | MODE[0|
|
|
| (2) | (2) | (2) | (2) | (2) | (2) | (2) | (2)
|
|
|------------------------------------------------------------------------------|
|
|
*/
|
|
#define HI_OPTION_FW_MODE_BITS 0x2
|
|
#define HI_OPTION_FW_MODE_SHIFT 0xC
|
|
|
|
#define HI_OPTION_FW_SUBMODE_BITS 0x2
|
|
#define HI_OPTION_FW_SUBMODE_SHIFT 0x14
|
|
|
|
/* Convert a Target virtual address into a Target physical address */
|
|
#define AR6003_VTOP(vaddr) ((vaddr) & 0x001fffff)
|
|
#define AR6004_VTOP(vaddr) (vaddr)
|
|
|
|
#define TARG_VTOP(target_type, vaddr) \
|
|
(((target_type) == TARGET_TYPE_AR6003) ? AR6003_VTOP(vaddr) : \
|
|
(((target_type) == TARGET_TYPE_AR6004) ? AR6004_VTOP(vaddr) : 0))
|
|
|
|
#define ATH6KL_FWLOG_PAYLOAD_SIZE 1500
|
|
|
|
struct ath6kl_dbglog_buf {
|
|
__le32 next;
|
|
__le32 buffer_addr;
|
|
__le32 bufsize;
|
|
__le32 length;
|
|
__le32 count;
|
|
__le32 free;
|
|
} __packed;
|
|
|
|
struct ath6kl_dbglog_hdr {
|
|
__le32 dbuf_addr;
|
|
__le32 dropped;
|
|
} __packed;
|
|
|
|
#endif
|