openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/net/wireless/brcm80211/brcmfmac
History
Arend van Spriel f55d94a600 brcmfmac: allow firmware-signal tlv to be longer than specified 
The firmware-signal API specification defines length for the different
tlv. During testing on different devices it turned out not all firmware
used the tlv length according specification. Therefore the length check
is made less strict with this patch.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
 		2013-06-12 15:02:15 -04:00
..
Makefile brcmfmac: support critical protocol API for DHCP 2013-04-23 14:16:52 -04:00
bcmsdh.c brcmfmac: define and use platform specific data for SDIO. 2013-04-12 14:27:55 -04:00
bcmsdh_sdmmc.c drivers/net/wireless/brcm80211/brcmfmac: add missing platform_driver owner 2013-05-22 15:09:15 -04:00
btcoex.c brcmfmac: support critical protocol API for DHCP 2013-04-23 14:16:52 -04:00
btcoex.h brcmfmac: support critical protocol API for DHCP 2013-04-23 14:16:52 -04:00
dhd.h brcmfmac: adopt new d11 interface 2013-04-12 14:27:54 -04:00
dhd_bus.h brcmfmac: add optional bus callback definition for tx queue cleanup 2013-04-03 15:07:05 -04:00
dhd_cdc.c brcmfmac: avoid error output on header only packet 2013-04-03 15:07:07 -04:00
dhd_common.c brcmfmac: Turn off ARP offloading when configured for AP. 2013-05-28 13:43:08 -04:00
dhd_dbg.c brcmfmac: handle firmware signalling destination entry state 2013-04-08 15:28:41 -04:00
dhd_dbg.h brcmfmac: add hexadecimal trace of message payload 2013-04-08 15:28:43 -04:00
dhd_linux.c brcmfmac: use struct net_device::destructor to remove interfaces 2013-05-28 13:43:09 -04:00
dhd_proto.h brcmfmac: add parameter to brcmf_proto_hdrpush() for data offset 2013-03-06 16:28:50 -05:00
dhd_sdio.c brcmfmac: define and use platform specific data for SDIO. 2013-04-12 14:27:55 -04:00
fweh.c brcmfmac: free net device when registration fails 2013-05-28 13:43:09 -04:00
fweh.h brcmfmac: only use ifidx from BDC header in brcmf_rx_frames() 2013-04-08 15:28:48 -04:00
fwil.c brcmfmac: add hexadecimal trace of message payload 2013-04-08 15:28:43 -04:00
fwil.h brcmfmac: use struct brcmf_if as interface object for fwil functions 2012-10-29 15:28:27 -04:00
fwil_types.h brcmfmac: Turn off ARP offloading when configured for AP. 2013-05-28 13:43:08 -04:00
fwsignal.c brcmfmac: allow firmware-signal tlv to be longer than specified 2013-06-12 15:02:15 -04:00
fwsignal.h brcmfmac: fix handling sk_buff cleanup upon bus tx failure 2013-04-03 15:07:06 -04:00
p2p.c brcmfmac: use struct net_device::destructor to remove interfaces 2013-05-28 13:43:09 -04:00
p2p.h brcmfmac: Add tx p2p off-channel support. 2013-02-08 14:51:43 -05:00
sdio_chip.c brcmfmac: Add drive strength programming for SDIO 43143. 2013-04-12 14:27:55 -04:00
sdio_chip.h brcmfmac: add support for dongle ARM CR4 core 2013-04-12 14:27:54 -04:00
sdio_host.h brcmfmac: define and use platform specific data for SDIO. 2013-04-12 14:27:55 -04:00
tracepoint.c brcmfmac: introduce tracepoints for message logging 2013-03-06 16:28:31 -05:00
tracepoint.h brcmfmac: add hexadecimal trace of message payload 2013-04-08 15:28:43 -04:00
usb.c brcmfmac: assure brcmf_txcomplete() is called in failure paths 2013-03-06 16:28:46 -05:00
usb.h brcmfmac: usb suspend/resume. 2012-11-16 14:28:47 -05:00
usb_rdl.h brcm80211: fmac: add USB support for bcm43235/6/8 chipsets 2012-02-22 14:48:53 -05:00
wl_cfg80211.c brcmfmac: Disable powersave mode for P2P link. 2013-05-28 13:43:10 -04:00
wl_cfg80211.h brcmfmac: add additional parameter to brcmf_free_vif() 2013-05-28 13:43:09 -04:00