mirror of https://gitee.com/openkylin/linux.git
40 lines
1.3 KiB
Plaintext
40 lines
1.3 KiB
Plaintext
Keystone 2 DSP GPIO controller bindings
|
|
|
|
HOST OS userland running on ARM can send interrupts to DSP cores using
|
|
the DSP GPIO controller IP. It provides 28 IRQ signals per each DSP core.
|
|
This is one of the component used by the IPC mechanism used on Keystone SOCs.
|
|
|
|
For example TCI6638K2K SoC has 8 DSP GPIO controllers:
|
|
- 8 for C66x CorePacx CPUs 0-7
|
|
|
|
Keystone 2 DSP GPIO controller has specific features:
|
|
- each GPIO can be configured only as output pin;
|
|
- setting GPIO value to 1 causes IRQ generation on target DSP core;
|
|
- reading pin value returns 0 - if IRQ was handled or 1 - IRQ is still
|
|
pending.
|
|
|
|
Required Properties:
|
|
- compatible: should be "ti,keystone-dsp-gpio"
|
|
- ti,syscon-dev: phandle/offset pair. The phandle to syscon used to
|
|
access device state control registers and the offset of device's specific
|
|
registers within device state control registers range.
|
|
- gpio-controller: Marks the device node as a gpio controller.
|
|
- #gpio-cells: Should be 2.
|
|
|
|
Please refer to gpio.txt in this directory for details of the common GPIO
|
|
bindings used by client devices.
|
|
|
|
Example:
|
|
dspgpio0: keystone_dsp_gpio@2620240 {
|
|
compatible = "ti,keystone-dsp-gpio";
|
|
ti,syscon-dev = <&devctrl 0x240>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
dsp0: dsp0 {
|
|
compatible = "linux,rproc-user";
|
|
...
|
|
kick-gpio = <&dspgpio0 27>;
|
|
};
|