linux/drivers/tty/serial
Herbert Xu 6741f551a0 Revert "tty: serial: 8250: add CON_CONSDEV to flags"
This commit needs to be reverted because it prevents people from
using the serial console as a secondary console with input being
directed to tty0.

IOW, if you boot with console=ttyS0 console=tty0 then all kernels
prior to this commit will produce output on both ttyS0 and tty0
but input will only be taken from tty0.  With this patch the serial
console will always be the primary console instead of tty0,
potentially preventing people from getting into their machines in
emergency situations.

Fixes: d03516df83 ("tty: serial: 8250: add CON_CONSDEV to flags")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-11 08:35:17 +01:00
..
8250 Revert "tty: serial: 8250: add CON_CONSDEV to flags" 2017-01-11 08:35:17 +01:00
cpm_uart tty: serial: cpm_uart: Fix module autoload for OF platform driver 2015-10-04 19:09:21 +01:00
jsm tty: serial: jsm_tty: constify uart_ops structures 2016-09-02 15:01:16 +02:00
21285.c
Kconfig tty: serial: Make the STM32 serial port depend on it's arch 2016-11-10 15:01:15 +01:00
Makefile tty: serial: Makefile: move kgdb to be initialized last 2016-10-27 16:27:24 +02:00
altera_jtaguart.c serial: altera: constify uart_ops structures 2016-09-02 15:01:16 +02:00
altera_uart.c serial: altera: constify uart_ops structures 2016-09-02 15:01:16 +02:00
amba-pl010.c
amba-pl011.c tty: amba-pl011: Add earlycon support for SBSA UART 2016-11-10 15:10:37 +01:00
amba-pl011.h tty: amba-pl011: clean up LCR register offsets 2015-12-13 19:59:48 -08:00
apbuart.c tty: serial: apbuart: Fix module autoload for OF platform driver 2015-10-04 19:09:21 +01:00
apbuart.h
ar933x_uart.c tree-wide: replace config_enabled() with IS_ENABLED() 2016-08-04 08:50:07 -04:00
arc_uart.c serial/arc: constify uart_ops structures 2016-09-01 21:05:41 +02:00
atmel_serial.c tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done 2017-01-11 08:18:45 +01:00
bcm63xx_uart.c serial/bcm63xx_uart: constify uart_ops structures 2016-09-02 15:01:16 +02:00
bfin_sport_uart.c
bfin_sport_uart.h
bfin_uart.c serial:bfin-uart:Remove 'struct timeval' 2015-12-13 19:59:48 -08:00
clps711x.c serial: clps711x: Changing the compatibility string to match with the smallest supported chip 2016-07-06 17:38:16 +02:00
crisv10.c serial: crisv10: fix invalid user-pointer check 2016-11-10 14:41:25 +01:00
crisv10.h
digicolor-usart.c tty/serial: digicolor: Fix bad usage of IS_ERR_VALUE 2016-02-14 17:39:36 -08:00
dz.c
dz.h
earlycon-arm-semihost.c tty/serial: mark __init early_smh_setup() static 2016-09-02 15:03:35 +02:00
earlycon.c ACPI: parse SPCR and enable matching console 2016-09-28 17:46:46 +02:00
efm32-uart.c
etraxfs-uart.c serial: etraxfs-uart: Fix crash 2015-11-20 16:19:54 -08:00
fsl_lpuart.c Merge 4.9-rc3 into tty-next 2016-10-30 06:42:10 -04:00
icom.c Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
icom.h
ifx6x60.c serial: ifx6x60: Free memory when probe fails 2016-11-10 14:50:46 +01:00
ifx6x60.h
imx.c serial: imx: Fix DCD reading 2016-09-27 12:55:27 +02:00
ioc3_serial.c
ioc4_serial.c serial: ioc4_serial: Free memory when kzalloc fails during probe 2016-11-10 14:50:46 +01:00
ip22zilog.c
ip22zilog.h
kgdb_nmi.c
kgdboc.c
lantiq.c drivers/tty: make serial/lantic.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
lpc32xx_hs.c tty: serial: lpc32xx_hs: fix handling platform_get_irq result 2015-10-04 19:09:21 +01:00
m32r_sio.c serial: m32r_sio: make it explicitly non-modular 2016-06-25 14:00:06 -07:00
m32r_sio_reg.h
max310x.c serial: max310x: Set IRQF_TRIGGER_FALLING flag when dev.of_node is not NULL 2016-09-15 12:35:49 +02:00
max3100.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
mcf.c
men_z135_uart.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
meson_uart.c tty: serial: meson: Implement earlycon support 2016-04-30 09:26:55 -07:00
mpc52xx_uart.c tty: serial: constify psc_ops structs 2016-02-06 22:31:47 -08:00
mps2-uart.c serial: mps2-uart: make driver explicitly non-modular 2016-06-25 14:01:57 -07:00
mpsc.c TTY: serial/mpsc, remove unused fields 2016-02-06 22:16:21 -08:00
msm_serial.c tty: serial: msm: fix definition of msm_stop_dma 2016-06-25 10:23:54 -07:00
mux.c parisc: serial/mux: Convert to uart_console_device instead of open-coded 2015-10-22 15:44:28 +02:00
mvebu-uart.c serial: mvebu-uart: free the IRQ in ->shutdown() 2016-06-25 14:00:06 -07:00
mxs-auart.c mxs-auart: count FIFO overrun errors 2016-11-16 17:17:42 +01:00
netx-serial.c
omap-serial.c Merge 4.5-rc4 into tty-next 2016-02-14 14:36:04 -08:00
pch_uart.c serial: pch_uart: add terminate entry for dmi_system_id tables 2016-10-27 16:01:31 +02:00
pic32_uart.c serial: pic32_uart: Fix double free of 'sport->irq_fault_name'. 2016-06-25 13:50:53 -07:00
pic32_uart.h serial: pic32_uart: Add PIC32 UART driver 2016-05-13 14:01:56 +02:00
pmac_zilog.c TTY: serial, handle platform_get_irq retval properly 2016-06-25 09:01:52 -07:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c serial: pxa2xx: remove __deprecated annotation 2016-11-10 14:50:45 +01:00
rp2.c
sa1100.c
samsung.c serial: samsung: Register cpufreq notifier only on S3C24xx 2016-08-31 15:39:58 +02:00
samsung.h serial: samsung: Register cpufreq notifier only on S3C24xx 2016-08-31 15:39:58 +02:00
sb1250-duart.c
sc16is7xx.c Merge 4.9-rc3 into tty-next 2016-10-30 06:42:10 -04:00
sccnxp.c
serial-tegra.c TTY: serial, handle platform_get_irq retval properly 2016-06-25 09:01:52 -07:00
serial_core.c Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
serial_ks8695.c serial: Fix ASYNC_* => UPF_* flags misuse 2016-01-28 14:17:42 -08:00
serial_mctrl_gpio.c serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct 2016-06-25 14:30:42 -07:00
serial_mctrl_gpio.h serial: mctrl_gpio: add modem control read routine 2016-06-25 14:30:42 -07:00
serial_txx9.c
sh-sci.c serial: sh-sci: Fix deadlock caused by serial output request 2016-11-10 14:39:44 +01:00
sh-sci.h serial: sh-sci: Clear (H)SCIF timeout and overrun during reset 2016-06-25 09:09:53 -07:00
sirfsoc_uart.c serial: sirf: Use generic uart-has-rtscts DT property 2016-04-30 09:26:55 -07:00
sirfsoc_uart.h serial: sirf: make fifo functions static 2016-06-25 14:01:57 -07:00
sn_console.c drivers/tty: make serial/sn_console.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sprd_serial.c remove lots of IS_ERR_VALUE abuses 2016-05-27 15:26:11 -07:00
st-asc.c serial: st-asc: constify uart_ops structures 2016-09-02 15:01:16 +02:00
stm32-usart.c serial: stm32: mark symbols static where possible 2016-09-27 12:55:27 +02:00
stm32-usart.h serial: stm32: Fix comparisons with undefined register 2016-10-27 16:00:31 +02:00
suncore.c drivers/tty: make serial/suncore.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sunhv.c serial: sunhv: Free memory when remove() is called 2016-11-16 10:57:25 +01:00
sunsab.c
sunsab.h
sunsu.c serial: sunsu: Free memory when probe fails 2016-11-16 10:57:26 +01:00
sunzilog.c
sunzilog.h
tilegx.c
timbuart.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
timbuart.h
uartlite.c serial-uartlite: constify uart_ops structures 2016-09-02 15:01:16 +02:00
ucc_uart.c QE-UART: add "fsl,t1040-ucc-uart" to of_device_id 2016-05-01 13:55:12 -07:00
vr41xx_siu.c
vt8500_serial.c serial: vt8500_serial: Fix a parameter of find_first_zero_bit. 2016-08-31 15:42:28 +02:00
xilinx_uartps.c serial: xuartps: Add new compatible string for ZynqMP 2016-10-27 16:00:32 +02:00
zs.c serial: zs: Fix a transmit lockup in console output 2016-02-06 23:13:30 -08:00
zs.h