mirror of https://gitee.com/openkylin/linux.git
281 lines
6.7 KiB
C
281 lines
6.7 KiB
C
/*
|
|
* Copyright (c) 2008-2009 Atheros Communications Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/nl80211.h>
|
|
#include <linux/pci.h>
|
|
#include "ath9k.h"
|
|
|
|
static struct pci_device_id ath_pci_id_table[] __devinitdata = {
|
|
{ PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
|
|
{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
|
|
{ PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
|
|
{ 0 }
|
|
};
|
|
|
|
/* return bus cachesize in 4B word units */
|
|
static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
|
|
{
|
|
u8 u8tmp;
|
|
|
|
pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE,
|
|
(u8 *)&u8tmp);
|
|
*csz = (int)u8tmp;
|
|
|
|
/*
|
|
* This check was put in to avoid "unplesant" consequences if
|
|
* the bootrom has not fully initialized all PCI devices.
|
|
* Sometimes the cache line size register is not set
|
|
*/
|
|
|
|
if (*csz == 0)
|
|
*csz = DEFAULT_CACHELINE >> 2; /* Use the default size */
|
|
}
|
|
|
|
static void ath_pci_cleanup(struct ath_softc *sc)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(sc->dev);
|
|
|
|
pci_iounmap(pdev, sc->mem);
|
|
pci_disable_device(pdev);
|
|
pci_release_region(pdev, 0);
|
|
}
|
|
|
|
static bool ath_pci_eeprom_read(struct ath_hw *ah, u32 off, u16 *data)
|
|
{
|
|
(void)REG_READ(ah, AR5416_EEPROM_OFFSET + (off << AR5416_EEPROM_S));
|
|
|
|
if (!ath9k_hw_wait(ah,
|
|
AR_EEPROM_STATUS_DATA,
|
|
AR_EEPROM_STATUS_DATA_BUSY |
|
|
AR_EEPROM_STATUS_DATA_PROT_ACCESS, 0,
|
|
AH_WAIT_TIMEOUT)) {
|
|
return false;
|
|
}
|
|
|
|
*data = MS(REG_READ(ah, AR_EEPROM_STATUS_DATA),
|
|
AR_EEPROM_STATUS_DATA_VAL);
|
|
|
|
return true;
|
|
}
|
|
|
|
static struct ath_bus_ops ath_pci_bus_ops = {
|
|
.read_cachesize = ath_pci_read_cachesize,
|
|
.cleanup = ath_pci_cleanup,
|
|
.eeprom_read = ath_pci_eeprom_read,
|
|
};
|
|
|
|
static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
void __iomem *mem;
|
|
struct ath_wiphy *aphy;
|
|
struct ath_softc *sc;
|
|
struct ieee80211_hw *hw;
|
|
u8 csz;
|
|
int ret = 0;
|
|
struct ath_hw *ah;
|
|
|
|
if (pci_enable_device(pdev))
|
|
return -EIO;
|
|
|
|
ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
|
|
if (ret) {
|
|
printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
|
|
goto bad;
|
|
}
|
|
|
|
ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
|
|
if (ret) {
|
|
printk(KERN_ERR "ath9k: 32-bit DMA consistent "
|
|
"DMA enable failed\n");
|
|
goto bad;
|
|
}
|
|
|
|
/*
|
|
* Cache line size is used to size and align various
|
|
* structures used to communicate with the hardware.
|
|
*/
|
|
pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
|
|
if (csz == 0) {
|
|
/*
|
|
* Linux 2.4.18 (at least) writes the cache line size
|
|
* register as a 16-bit wide register which is wrong.
|
|
* We must have this setup properly for rx buffer
|
|
* DMA to work so force a reasonable value here if it
|
|
* comes up zero.
|
|
*/
|
|
csz = L1_CACHE_BYTES / sizeof(u32);
|
|
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
|
|
}
|
|
/*
|
|
* The default setting of latency timer yields poor results,
|
|
* set it to the value used by other systems. It may be worth
|
|
* tweaking this setting more.
|
|
*/
|
|
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
|
|
|
|
pci_set_master(pdev);
|
|
|
|
ret = pci_request_region(pdev, 0, "ath9k");
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "PCI memory region reserve error\n");
|
|
ret = -ENODEV;
|
|
goto bad;
|
|
}
|
|
|
|
mem = pci_iomap(pdev, 0, 0);
|
|
if (!mem) {
|
|
printk(KERN_ERR "PCI memory map error\n") ;
|
|
ret = -EIO;
|
|
goto bad1;
|
|
}
|
|
|
|
hw = ieee80211_alloc_hw(sizeof(struct ath_wiphy) +
|
|
sizeof(struct ath_softc), &ath9k_ops);
|
|
if (hw == NULL) {
|
|
printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n");
|
|
goto bad2;
|
|
}
|
|
|
|
SET_IEEE80211_DEV(hw, &pdev->dev);
|
|
pci_set_drvdata(pdev, hw);
|
|
|
|
aphy = hw->priv;
|
|
sc = (struct ath_softc *) (aphy + 1);
|
|
aphy->sc = sc;
|
|
aphy->hw = hw;
|
|
sc->pri_wiphy = aphy;
|
|
sc->hw = hw;
|
|
sc->dev = &pdev->dev;
|
|
sc->mem = mem;
|
|
sc->bus_ops = &ath_pci_bus_ops;
|
|
|
|
if (ath_attach(id->device, sc) != 0) {
|
|
ret = -ENODEV;
|
|
goto bad3;
|
|
}
|
|
|
|
/* setup interrupt service routine */
|
|
|
|
if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) {
|
|
printk(KERN_ERR "%s: request_irq failed\n",
|
|
wiphy_name(hw->wiphy));
|
|
ret = -EIO;
|
|
goto bad4;
|
|
}
|
|
|
|
sc->irq = pdev->irq;
|
|
|
|
ah = sc->sc_ah;
|
|
printk(KERN_INFO
|
|
"%s: Atheros AR%s MAC/BB Rev:%x "
|
|
"AR%s RF Rev:%x: mem=0x%lx, irq=%d\n",
|
|
wiphy_name(hw->wiphy),
|
|
ath_mac_bb_name(ah->hw_version.macVersion),
|
|
ah->hw_version.macRev,
|
|
ath_rf_name((ah->hw_version.analog5GhzRev & AR_RADIO_SREV_MAJOR)),
|
|
ah->hw_version.phyRev,
|
|
(unsigned long)mem, pdev->irq);
|
|
|
|
return 0;
|
|
bad4:
|
|
ath_detach(sc);
|
|
bad3:
|
|
ieee80211_free_hw(hw);
|
|
bad2:
|
|
pci_iounmap(pdev, mem);
|
|
bad1:
|
|
pci_release_region(pdev, 0);
|
|
bad:
|
|
pci_disable_device(pdev);
|
|
return ret;
|
|
}
|
|
|
|
static void ath_pci_remove(struct pci_dev *pdev)
|
|
{
|
|
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
|
|
struct ath_wiphy *aphy = hw->priv;
|
|
struct ath_softc *sc = aphy->sc;
|
|
|
|
ath_cleanup(sc);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
|
|
struct ath_wiphy *aphy = hw->priv;
|
|
struct ath_softc *sc = aphy->sc;
|
|
|
|
ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
|
|
|
|
pci_save_state(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath_pci_resume(struct pci_dev *pdev)
|
|
{
|
|
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
|
|
struct ath_wiphy *aphy = hw->priv;
|
|
struct ath_softc *sc = aphy->sc;
|
|
int err;
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err)
|
|
return err;
|
|
pci_restore_state(pdev);
|
|
|
|
/* Enable LED */
|
|
ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
|
|
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
|
|
ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
|
|
|
|
static struct pci_driver ath_pci_driver = {
|
|
.name = "ath9k",
|
|
.id_table = ath_pci_id_table,
|
|
.probe = ath_pci_probe,
|
|
.remove = ath_pci_remove,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ath_pci_suspend,
|
|
.resume = ath_pci_resume,
|
|
#endif /* CONFIG_PM */
|
|
};
|
|
|
|
int ath_pci_init(void)
|
|
{
|
|
return pci_register_driver(&ath_pci_driver);
|
|
}
|
|
|
|
void ath_pci_exit(void)
|
|
{
|
|
pci_unregister_driver(&ath_pci_driver);
|
|
}
|