mirror of https://gitee.com/openkylin/linux.git
3612 lines
91 KiB
C
3612 lines
91 KiB
C
/*
|
|
* linux/drivers/char/8250_pci.c
|
|
*
|
|
* Probe module for 8250/16550-type PCI serial ports.
|
|
*
|
|
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
|
|
*
|
|
* Copyright (C) 2001 Russell King, All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/string.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/8250_pci.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "8250.h"
|
|
|
|
#undef SERIAL_DEBUG_PCI
|
|
|
|
/*
|
|
* init function returns:
|
|
* > 0 - number of ports
|
|
* = 0 - use board->num_ports
|
|
* < 0 - error
|
|
*/
|
|
struct pci_serial_quirk {
|
|
u32 vendor;
|
|
u32 device;
|
|
u32 subvendor;
|
|
u32 subdevice;
|
|
int (*init)(struct pci_dev *dev);
|
|
int (*setup)(struct serial_private *,
|
|
const struct pciserial_board *,
|
|
struct uart_port *, int);
|
|
void (*exit)(struct pci_dev *dev);
|
|
};
|
|
|
|
#define PCI_NUM_BAR_RESOURCES 6
|
|
|
|
struct serial_private {
|
|
struct pci_dev *dev;
|
|
unsigned int nr;
|
|
void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES];
|
|
struct pci_serial_quirk *quirk;
|
|
int line[0];
|
|
};
|
|
|
|
static void moan_device(const char *str, struct pci_dev *dev)
|
|
{
|
|
printk(KERN_WARNING "%s: %s\n"
|
|
KERN_WARNING "Please send the output of lspci -vv, this\n"
|
|
KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
|
|
KERN_WARNING "manufacturer and name of serial board or\n"
|
|
KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n",
|
|
pci_name(dev), str, dev->vendor, dev->device,
|
|
dev->subsystem_vendor, dev->subsystem_device);
|
|
}
|
|
|
|
static int
|
|
setup_port(struct serial_private *priv, struct uart_port *port,
|
|
int bar, int offset, int regshift)
|
|
{
|
|
struct pci_dev *dev = priv->dev;
|
|
unsigned long base, len;
|
|
|
|
if (bar >= PCI_NUM_BAR_RESOURCES)
|
|
return -EINVAL;
|
|
|
|
base = pci_resource_start(dev, bar);
|
|
|
|
if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
|
|
len = pci_resource_len(dev, bar);
|
|
|
|
if (!priv->remapped_bar[bar])
|
|
priv->remapped_bar[bar] = ioremap_nocache(base, len);
|
|
if (!priv->remapped_bar[bar])
|
|
return -ENOMEM;
|
|
|
|
port->iotype = UPIO_MEM;
|
|
port->iobase = 0;
|
|
port->mapbase = base + offset;
|
|
port->membase = priv->remapped_bar[bar] + offset;
|
|
port->regshift = regshift;
|
|
} else {
|
|
port->iotype = UPIO_PORT;
|
|
port->iobase = base + offset;
|
|
port->mapbase = 0;
|
|
port->membase = NULL;
|
|
port->regshift = 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* ADDI-DATA GmbH communication cards <info@addi-data.com>
|
|
*/
|
|
static int addidata_apci7800_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_port *port, int idx)
|
|
{
|
|
unsigned int bar = 0, offset = board->first_offset;
|
|
bar = FL_GET_BASE(board->flags);
|
|
|
|
if (idx < 2) {
|
|
offset += idx * board->uart_offset;
|
|
} else if ((idx >= 2) && (idx < 4)) {
|
|
bar += 1;
|
|
offset += ((idx - 2) * board->uart_offset);
|
|
} else if ((idx >= 4) && (idx < 6)) {
|
|
bar += 2;
|
|
offset += ((idx - 4) * board->uart_offset);
|
|
} else if (idx >= 6) {
|
|
bar += 3;
|
|
offset += ((idx - 6) * board->uart_offset);
|
|
}
|
|
|
|
return setup_port(priv, port, bar, offset, board->reg_shift);
|
|
}
|
|
|
|
/*
|
|
* AFAVLAB uses a different mixture of BARs and offsets
|
|
* Not that ugly ;) -- HW
|
|
*/
|
|
static int
|
|
afavlab_setup(struct serial_private *priv, const struct pciserial_board *board,
|
|
struct uart_port *port, int idx)
|
|
{
|
|
unsigned int bar, offset = board->first_offset;
|
|
|
|
bar = FL_GET_BASE(board->flags);
|
|
if (idx < 4)
|
|
bar += idx;
|
|
else {
|
|
bar = 4;
|
|
offset += (idx - 4) * board->uart_offset;
|
|
}
|
|
|
|
return setup_port(priv, port, bar, offset, board->reg_shift);
|
|
}
|
|
|
|
/*
|
|
* HP's Remote Management Console. The Diva chip came in several
|
|
* different versions. N-class, L2000 and A500 have two Diva chips, each
|
|
* with 3 UARTs (the third UART on the second chip is unused). Superdome
|
|
* and Keystone have one Diva chip with 3 UARTs. Some later machines have
|
|
* one Diva chip, but it has been expanded to 5 UARTs.
|
|
*/
|
|
static int pci_hp_diva_init(struct pci_dev *dev)
|
|
{
|
|
int rc = 0;
|
|
|
|
switch (dev->subsystem_device) {
|
|
case PCI_DEVICE_ID_HP_DIVA_TOSCA1:
|
|
case PCI_DEVICE_ID_HP_DIVA_HALFDOME:
|
|
case PCI_DEVICE_ID_HP_DIVA_KEYSTONE:
|
|
case PCI_DEVICE_ID_HP_DIVA_EVEREST:
|
|
rc = 3;
|
|
break;
|
|
case PCI_DEVICE_ID_HP_DIVA_TOSCA2:
|
|
rc = 2;
|
|
break;
|
|
case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
|
|
rc = 4;
|
|
break;
|
|
case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
|
|
case PCI_DEVICE_ID_HP_DIVA_HURRICANE:
|
|
rc = 1;
|
|
break;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* HP's Diva chip puts the 4th/5th serial port further out, and
|
|
* some serial ports are supposed to be hidden on certain models.
|
|
*/
|
|
static int
|
|
pci_hp_diva_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_port *port, int idx)
|
|
{
|
|
unsigned int offset = board->first_offset;
|
|
unsigned int bar = FL_GET_BASE(board->flags);
|
|
|
|
switch (priv->dev->subsystem_device) {
|
|
case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
|
|
if (idx == 3)
|
|
idx++;
|
|
break;
|
|
case PCI_DEVICE_ID_HP_DIVA_EVEREST:
|
|
if (idx > 0)
|
|
idx++;
|
|
if (idx > 2)
|
|
idx++;
|
|
break;
|
|
}
|
|
if (idx > 2)
|
|
offset = 0x18;
|
|
|
|
offset += idx * board->uart_offset;
|
|
|
|
return setup_port(priv, port, bar, offset, board->reg_shift);
|
|
}
|
|
|
|
/*
|
|
* Added for EKF Intel i960 serial boards
|
|
*/
|
|
static int pci_inteli960ni_init(struct pci_dev *dev)
|
|
{
|
|
unsigned long oldval;
|
|
|
|
if (!(dev->subsystem_device & 0x1000))
|
|
return -ENODEV;
|
|
|
|
/* is firmware started? */
|
|
pci_read_config_dword(dev, 0x44, (void *)&oldval);
|
|
if (oldval == 0x00001000L) { /* RESET value */
|
|
printk(KERN_DEBUG "Local i960 firmware missing");
|
|
return -ENODEV;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Some PCI serial cards using the PLX 9050 PCI interface chip require
|
|
* that the card interrupt be explicitly enabled or disabled. This
|
|
* seems to be mainly needed on card using the PLX which also use I/O
|
|
* mapped memory.
|
|
*/
|
|
static int pci_plx9050_init(struct pci_dev *dev)
|
|
{
|
|
u8 irq_config;
|
|
void __iomem *p;
|
|
|
|
if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) {
|
|
moan_device("no memory in bar 0", dev);
|
|
return 0;
|
|
}
|
|
|
|
irq_config = 0x41;
|
|
if (dev->vendor == PCI_VENDOR_ID_PANACOM ||
|
|
dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS)
|
|
irq_config = 0x43;
|
|
|
|
if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
|
|
(dev->device == PCI_DEVICE_ID_PLX_ROMULUS))
|
|
/*
|
|
* As the megawolf cards have the int pins active
|
|
* high, and have 2 UART chips, both ints must be
|
|
* enabled on the 9050. Also, the UARTS are set in
|
|
* 16450 mode by default, so we have to enable the
|
|
* 16C950 'enhanced' mode so that we can use the
|
|
* deep FIFOs
|
|
*/
|
|
irq_config = 0x5b;
|
|
/*
|
|
* enable/disable interrupts
|
|
*/
|
|
p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
|
|
if (p == NULL)
|
|
return -ENOMEM;
|
|
writel(irq_config, p + 0x4c);
|
|
|
|
/*
|
|
* Read the register back to ensure that it took effect.
|
|
*/
|
|
readl(p + 0x4c);
|
|
iounmap(p);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __devexit pci_plx9050_exit(struct pci_dev *dev)
|
|
{
|
|
u8 __iomem *p;
|
|
|
|
if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0)
|
|
return;
|
|
|
|
/*
|
|
* disable interrupts
|
|
*/
|
|
p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
|
|
if (p != NULL) {
|
|
writel(0, p + 0x4c);
|
|
|
|
/*
|
|
* Read the register back to ensure that it took effect.
|
|
*/
|
|
readl(p + 0x4c);
|
|
iounmap(p);
|
|
}
|
|
}
|
|
|
|
#define NI8420_INT_ENABLE_REG 0x38
|
|
#define NI8420_INT_ENABLE_BIT 0x2000
|
|
|
|
static void __devexit pci_ni8420_exit(struct pci_dev *dev)
|
|
{
|
|
void __iomem *p;
|
|
unsigned long base, len;
|
|
unsigned int bar = 0;
|
|
|
|
if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
|
|
moan_device("no memory in bar", dev);
|
|
return;
|
|
}
|
|
|
|
base = pci_resource_start(dev, bar);
|
|
len = pci_resource_len(dev, bar);
|
|
p = ioremap_nocache(base, len);
|
|
if (p == NULL)
|
|
return;
|
|
|
|
/* Disable the CPU Interrupt */
|
|
writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT),
|
|
p + NI8420_INT_ENABLE_REG);
|
|
iounmap(p);
|
|
}
|
|
|
|
|
|
/* MITE registers */
|
|
#define MITE_IOWBSR1 0xc4
|
|
#define MITE_IOWCR1 0xf4
|
|
#define MITE_LCIMR1 0x08
|
|
#define MITE_LCIMR2 0x10
|
|
|
|
#define MITE_LCIMR2_CLR_CPU_IE (1 << 30)
|
|
|
|
static void __devexit pci_ni8430_exit(struct pci_dev *dev)
|
|
{
|
|
void __iomem *p;
|
|
unsigned long base, len;
|
|
unsigned int bar = 0;
|
|
|
|
if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
|
|
moan_device("no memory in bar", dev);
|
|
return;
|
|
}
|
|
|
|
base = pci_resource_start(dev, bar);
|
|
len = pci_resource_len(dev, bar);
|
|
p = ioremap_nocache(base, len);
|
|
if (p == NULL)
|
|
return;
|
|
|
|
/* Disable the CPU Interrupt */
|
|
writel(MITE_LCIMR2_CLR_CPU_IE, p + MITE_LCIMR2);
|
|
iounmap(p);
|
|
}
|
|
|
|
/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
|
|
static int
|
|
sbs_setup(struct serial_private *priv, const struct pciserial_board *board,
|
|
struct uart_port *port, int idx)
|
|
{
|
|
unsigned int bar, offset = board->first_offset;
|
|
|
|
bar = 0;
|
|
|
|
if (idx < 4) {
|
|
/* first four channels map to 0, 0x100, 0x200, 0x300 */
|
|
offset += idx * board->uart_offset;
|
|
} else if (idx < 8) {
|
|
/* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */
|
|
offset += idx * board->uart_offset + 0xC00;
|
|
} else /* we have only 8 ports on PMC-OCTALPRO */
|
|
return 1;
|
|
|
|
return setup_port(priv, port, bar, offset, board->reg_shift);
|
|
}
|
|
|
|
/*
|
|
* This does initialization for PMC OCTALPRO cards:
|
|
* maps the device memory, resets the UARTs (needed, bc
|
|
* if the module is removed and inserted again, the card
|
|
* is in the sleep mode) and enables global interrupt.
|
|
*/
|
|
|
|
/* global control register offset for SBS PMC-OctalPro */
|
|
#define OCT_REG_CR_OFF 0x500
|
|
|
|
static int sbs_init(struct pci_dev *dev)
|
|
{
|
|
u8 __iomem *p;
|
|
|
|
p = pci_ioremap_bar(dev, 0);
|
|
|
|
if (p == NULL)
|
|
return -ENOMEM;
|
|
/* Set bit-4 Control Register (UART RESET) in to reset the uarts */
|
|
writeb(0x10, p + OCT_REG_CR_OFF);
|
|
udelay(50);
|
|
writeb(0x0, p + OCT_REG_CR_OFF);
|
|
|
|
/* Set bit-2 (INTENABLE) of Control Register */
|
|
writeb(0x4, p + OCT_REG_CR_OFF);
|
|
iounmap(p);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Disables the global interrupt of PMC-OctalPro
|
|
*/
|
|
|
|
static void __devexit sbs_exit(struct pci_dev *dev)
|
|
{
|
|
u8 __iomem *p;
|
|
|
|
p = pci_ioremap_bar(dev, 0);
|
|
/* FIXME: What if resource_len < OCT_REG_CR_OFF */
|
|
if (p != NULL)
|
|
writeb(0, p + OCT_REG_CR_OFF);
|
|
iounmap(p);
|
|
}
|
|
|
|
/*
|
|
* SIIG serial cards have an PCI interface chip which also controls
|
|
* the UART clocking frequency. Each UART can be clocked independently
|
|
* (except cards equiped with 4 UARTs) and initial clocking settings
|
|
* are stored in the EEPROM chip. It can cause problems because this
|
|
* version of serial driver doesn't support differently clocked UART's
|
|
* on single PCI card. To prevent this, initialization functions set
|
|
* high frequency clocking for all UART's on given card. It is safe (I
|
|
* hope) because it doesn't touch EEPROM settings to prevent conflicts
|
|
* with other OSes (like M$ DOS).
|
|
*
|
|
* SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999
|
|
*
|
|
* There is two family of SIIG serial cards with different PCI
|
|
* interface chip and different configuration methods:
|
|
* - 10x cards have control registers in IO and/or memory space;
|
|
* - 20x cards have control registers in standard PCI configuration space.
|
|
*
|
|
* Note: all 10x cards have PCI device ids 0x10..
|
|
* all 20x cards have PCI device ids 0x20..
|
|
*
|
|
* There are also Quartet Serial cards which use Oxford Semiconductor
|
|
* 16954 quad UART PCI chip clocked by 18.432 MHz quartz.
|
|
*
|
|
* Note: some SIIG cards are probed by the parport_serial object.
|
|
*/
|
|
|
|
#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
|
|
#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
|
|
|
|
static int pci_siig10x_init(struct pci_dev *dev)
|
|
{
|
|
u16 data;
|
|
void __iomem *p;
|
|
|
|
switch (dev->device & 0xfff8) {
|
|
case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */
|
|
data = 0xffdf;
|
|
break;
|
|
case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */
|
|
data = 0xf7ff;
|
|
break;
|
|
default: /* 1S1P, 4S */
|
|
data = 0xfffb;
|
|
break;
|
|
}
|
|
|
|
p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
|
|
if (p == NULL)
|
|
return -ENOMEM;
|
|
|
|
writew(readw(p + 0x28) & data, p + 0x28);
|
|
readw(p + 0x28);
|
|
iounmap(p);
|
|
return 0;
|
|
}
|
|
|
|
#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
|
|
#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
|
|
|
|
static int pci_siig20x_init(struct pci_dev *dev)
|
|
{
|
|
u8 data;
|
|
|
|
/* Change clock frequency for the first UART. */
|
|
pci_read_config_byte(dev, 0x6f, &data);
|
|
pci_write_config_byte(dev, 0x6f, data & 0xef);
|
|
|
|
/* If this card has 2 UART, we have to do the same with second UART. */
|
|
if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
|
|
((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
|
|
pci_read_config_byte(dev, 0x73, &data);
|
|
pci_write_config_byte(dev, 0x73, data & 0xef);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int pci_siig_init(struct pci_dev *dev)
|
|
{
|
|
unsigned int type = dev->device & 0xff00;
|
|
|
|
if (type == 0x1000)
|
|
return pci_siig10x_init(dev);
|
|
else if (type == 0x2000)
|
|
return pci_siig20x_init(dev);
|
|
|
|
moan_device("Unknown SIIG card", dev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int pci_siig_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_port *port, int idx)
|
|
{
|
|
unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;
|
|
|
|
if (idx > 3) {
|
|
bar = 4;
|
|
offset = (idx - 4) * 8;
|
|
}
|
|
|
|
return setup_port(priv, port, bar, offset, 0);
|
|
}
|
|
|
|
/*
|
|
* Timedia has an explosion of boards, and to avoid the PCI table from
|
|
* growing *huge*, we use this function to collapse some 70 entries
|
|
* in the PCI table into one, for sanity's and compactness's sake.
|
|
*/
|
|
static const unsigned short timedia_single_port[] = {
|
|
0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
|
|
};
|
|
|
|
static const unsigned short timedia_dual_port[] = {
|
|
0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
|
|
0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
|
|
0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
|
|
0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
|
|
0xD079, 0
|
|
};
|
|
|
|
static const unsigned short timedia_quad_port[] = {
|
|
0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
|
|
0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
|
|
0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
|
|
0xB157, 0
|
|
};
|
|
|
|
static const unsigned short timedia_eight_port[] = {
|
|
0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
|
|
0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
|
|
};
|
|
|
|
static const struct timedia_struct {
|
|
int num;
|
|
const unsigned short *ids;
|
|
} timedia_data[] = {
|
|
{ 1, timedia_single_port },
|
|
{ 2, timedia_dual_port },
|
|
{ 4, timedia_quad_port },
|
|
{ 8, timedia_eight_port }
|
|
};
|
|
|
|
static int pci_timedia_init(struct pci_dev *dev)
|
|
{
|
|
const unsigned short *ids;
|
|
int i, j;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(timedia_data); i++) {
|
|
ids = timedia_data[i].ids;
|
|
for (j = 0; ids[j]; j++)
|
|
if (dev->subsystem_device == ids[j])
|
|
return timedia_data[i].num;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Timedia/SUNIX uses a mixture of BARs and offsets
|
|
* Ugh, this is ugly as all hell --- TYT
|
|
*/
|
|
static int
|
|
pci_timedia_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_port *port, int idx)
|
|
{
|
|
unsigned int bar = 0, offset = board->first_offset;
|
|
|
|
switch (idx) {
|
|
case 0:
|
|
bar = 0;
|
|
break;
|
|
case 1:
|
|
offset = board->uart_offset;
|
|
bar = 0;
|
|
break;
|
|
case 2:
|
|
bar = 1;
|
|
break;
|
|
case 3:
|
|
offset = board->uart_offset;
|
|
/* FALLTHROUGH */
|
|
case 4: /* BAR 2 */
|
|
case 5: /* BAR 3 */
|
|
case 6: /* BAR 4 */
|
|
case 7: /* BAR 5 */
|
|
bar = idx - 2;
|
|
}
|
|
|
|
return setup_port(priv, port, bar, offset, board->reg_shift);
|
|
}
|
|
|
|
/*
|
|
* Some Titan cards are also a little weird
|
|
*/
|
|
static int
|
|
titan_400l_800l_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_port *port, int idx)
|
|
{
|
|
unsigned int bar, offset = board->first_offset;
|
|
|
|
switch (idx) {
|
|
case 0:
|
|
bar = 1;
|
|
break;
|
|
case 1:
|
|
bar = 2;
|
|
break;
|
|
default:
|
|
bar = 4;
|
|
offset = (idx - 2) * board->uart_offset;
|
|
}
|
|
|
|
return setup_port(priv, port, bar, offset, board->reg_shift);
|
|
}
|
|
|
|
static int pci_xircom_init(struct pci_dev *dev)
|
|
{
|
|
msleep(100);
|
|
return 0;
|
|
}
|
|
|
|
static int pci_ni8420_init(struct pci_dev *dev)
|
|
{
|
|
void __iomem *p;
|
|
unsigned long base, len;
|
|
unsigned int bar = 0;
|
|
|
|
if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
|
|
moan_device("no memory in bar", dev);
|
|
return 0;
|
|
}
|
|
|
|
base = pci_resource_start(dev, bar);
|
|
len = pci_resource_len(dev, bar);
|
|
p = ioremap_nocache(base, len);
|
|
if (p == NULL)
|
|
return -ENOMEM;
|
|
|
|
/* Enable CPU Interrupt */
|
|
writel(readl(p + NI8420_INT_ENABLE_REG) | NI8420_INT_ENABLE_BIT,
|
|
p + NI8420_INT_ENABLE_REG);
|
|
|
|
iounmap(p);
|
|
return 0;
|
|
}
|
|
|
|
#define MITE_IOWBSR1_WSIZE 0xa
|
|
#define MITE_IOWBSR1_WIN_OFFSET 0x800
|
|
#define MITE_IOWBSR1_WENAB (1 << 7)
|
|
#define MITE_LCIMR1_IO_IE_0 (1 << 24)
|
|
#define MITE_LCIMR2_SET_CPU_IE (1 << 31)
|
|
#define MITE_IOWCR1_RAMSEL_MASK 0xfffffffe
|
|
|
|
static int pci_ni8430_init(struct pci_dev *dev)
|
|
{
|
|
void __iomem *p;
|
|
unsigned long base, len;
|
|
u32 device_window;
|
|
unsigned int bar = 0;
|
|
|
|
if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
|
|
moan_device("no memory in bar", dev);
|
|
return 0;
|
|
}
|
|
|
|
base = pci_resource_start(dev, bar);
|
|
len = pci_resource_len(dev, bar);
|
|
p = ioremap_nocache(base, len);
|
|
if (p == NULL)
|
|
return -ENOMEM;
|
|
|
|
/* Set device window address and size in BAR0 */
|
|
device_window = ((base + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00)
|
|
| MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
|
|
writel(device_window, p + MITE_IOWBSR1);
|
|
|
|
/* Set window access to go to RAMSEL IO address space */
|
|
writel((readl(p + MITE_IOWCR1) & MITE_IOWCR1_RAMSEL_MASK),
|
|
p + MITE_IOWCR1);
|
|
|
|
/* Enable IO Bus Interrupt 0 */
|
|
writel(MITE_LCIMR1_IO_IE_0, p + MITE_LCIMR1);
|
|
|
|
/* Enable CPU Interrupt */
|
|
writel(MITE_LCIMR2_SET_CPU_IE, p + MITE_LCIMR2);
|
|
|
|
iounmap(p);
|
|
return 0;
|
|
}
|
|
|
|
/* UART Port Control Register */
|
|
#define NI8430_PORTCON 0x0f
|
|
#define NI8430_PORTCON_TXVR_ENABLE (1 << 3)
|
|
|
|
static int
|
|
pci_ni8430_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_port *port, int idx)
|
|
{
|
|
void __iomem *p;
|
|
unsigned long base, len;
|
|
unsigned int bar, offset = board->first_offset;
|
|
|
|
if (idx >= board->num_ports)
|
|
return 1;
|
|
|
|
bar = FL_GET_BASE(board->flags);
|
|
offset += idx * board->uart_offset;
|
|
|
|
base = pci_resource_start(priv->dev, bar);
|
|
len = pci_resource_len(priv->dev, bar);
|
|
p = ioremap_nocache(base, len);
|
|
|
|
/* enable the transciever */
|
|
writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE,
|
|
p + offset + NI8430_PORTCON);
|
|
|
|
iounmap(p);
|
|
|
|
return setup_port(priv, port, bar, offset, board->reg_shift);
|
|
}
|
|
|
|
|
|
static int pci_netmos_init(struct pci_dev *dev)
|
|
{
|
|
/* subdevice 0x00PS means <P> parallel, <S> serial */
|
|
unsigned int num_serial = dev->subsystem_device & 0xf;
|
|
|
|
if (dev->device == PCI_DEVICE_ID_NETMOS_9901)
|
|
return 0;
|
|
if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
|
|
dev->subsystem_device == 0x0299)
|
|
return 0;
|
|
|
|
if (num_serial == 0)
|
|
return -ENODEV;
|
|
return num_serial;
|
|
}
|
|
|
|
/*
|
|
* These chips are available with optionally one parallel port and up to
|
|
* two serial ports. Unfortunately they all have the same product id.
|
|
*
|
|
* Basic configuration is done over a region of 32 I/O ports. The base
|
|
* ioport is called INTA or INTC, depending on docs/other drivers.
|
|
*
|
|
* The region of the 32 I/O ports is configured in POSIO0R...
|
|
*/
|
|
|
|
/* registers */
|
|
#define ITE_887x_MISCR 0x9c
|
|
#define ITE_887x_INTCBAR 0x78
|
|
#define ITE_887x_UARTBAR 0x7c
|
|
#define ITE_887x_PS0BAR 0x10
|
|
#define ITE_887x_POSIO0 0x60
|
|
|
|
/* I/O space size */
|
|
#define ITE_887x_IOSIZE 32
|
|
/* I/O space size (bits 26-24; 8 bytes = 011b) */
|
|
#define ITE_887x_POSIO_IOSIZE_8 (3 << 24)
|
|
/* I/O space size (bits 26-24; 32 bytes = 101b) */
|
|
#define ITE_887x_POSIO_IOSIZE_32 (5 << 24)
|
|
/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */
|
|
#define ITE_887x_POSIO_SPEED (3 << 29)
|
|
/* enable IO_Space bit */
|
|
#define ITE_887x_POSIO_ENABLE (1 << 31)
|
|
|
|
static int pci_ite887x_init(struct pci_dev *dev)
|
|
{
|
|
/* inta_addr are the configuration addresses of the ITE */
|
|
static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0,
|
|
0x200, 0x280, 0 };
|
|
int ret, i, type;
|
|
struct resource *iobase = NULL;
|
|
u32 miscr, uartbar, ioport;
|
|
|
|
/* search for the base-ioport */
|
|
i = 0;
|
|
while (inta_addr[i] && iobase == NULL) {
|
|
iobase = request_region(inta_addr[i], ITE_887x_IOSIZE,
|
|
"ite887x");
|
|
if (iobase != NULL) {
|
|
/* write POSIO0R - speed | size | ioport */
|
|
pci_write_config_dword(dev, ITE_887x_POSIO0,
|
|
ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
|
|
ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]);
|
|
/* write INTCBAR - ioport */
|
|
pci_write_config_dword(dev, ITE_887x_INTCBAR,
|
|
inta_addr[i]);
|
|
ret = inb(inta_addr[i]);
|
|
if (ret != 0xff) {
|
|
/* ioport connected */
|
|
break;
|
|
}
|
|
release_region(iobase->start, ITE_887x_IOSIZE);
|
|
iobase = NULL;
|
|
}
|
|
i++;
|
|
}
|
|
|
|
if (!inta_addr[i]) {
|
|
printk(KERN_ERR "ite887x: could not find iobase\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* start of undocumented type checking (see parport_pc.c) */
|
|
type = inb(iobase->start + 0x18) & 0x0f;
|
|
|
|
switch (type) {
|
|
case 0x2: /* ITE8871 (1P) */
|
|
case 0xa: /* ITE8875 (1P) */
|
|
ret = 0;
|
|
break;
|
|
case 0xe: /* ITE8872 (2S1P) */
|
|
ret = 2;
|
|
break;
|
|
case 0x6: /* ITE8873 (1S) */
|
|
ret = 1;
|
|
break;
|
|
case 0x8: /* ITE8874 (2S) */
|
|
ret = 2;
|
|
break;
|
|
default:
|
|
moan_device("Unknown ITE887x", dev);
|
|
ret = -ENODEV;
|
|
}
|
|
|
|
/* configure all serial ports */
|
|
for (i = 0; i < ret; i++) {
|
|
/* read the I/O port from the device */
|
|
pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)),
|
|
&ioport);
|
|
ioport &= 0x0000FF00; /* the actual base address */
|
|
pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)),
|
|
ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
|
|
ITE_887x_POSIO_IOSIZE_8 | ioport);
|
|
|
|
/* write the ioport to the UARTBAR */
|
|
pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar);
|
|
uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */
|
|
uartbar |= (ioport << (16 * i)); /* set the ioport */
|
|
pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar);
|
|
|
|
/* get current config */
|
|
pci_read_config_dword(dev, ITE_887x_MISCR, &miscr);
|
|
/* disable interrupts (UARTx_Routing[3:0]) */
|
|
miscr &= ~(0xf << (12 - 4 * i));
|
|
/* activate the UART (UARTx_En) */
|
|
miscr |= 1 << (23 - i);
|
|
/* write new config with activated UART */
|
|
pci_write_config_dword(dev, ITE_887x_MISCR, miscr);
|
|
}
|
|
|
|
if (ret <= 0) {
|
|
/* the device has no UARTs if we get here */
|
|
release_region(iobase->start, ITE_887x_IOSIZE);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __devexit pci_ite887x_exit(struct pci_dev *dev)
|
|
{
|
|
u32 ioport;
|
|
/* the ioport is bit 0-15 in POSIO0R */
|
|
pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport);
|
|
ioport &= 0xffff;
|
|
release_region(ioport, ITE_887x_IOSIZE);
|
|
}
|
|
|
|
/*
|
|
* Oxford Semiconductor Inc.
|
|
* Check that device is part of the Tornado range of devices, then determine
|
|
* the number of ports available on the device.
|
|
*/
|
|
static int pci_oxsemi_tornado_init(struct pci_dev *dev)
|
|
{
|
|
u8 __iomem *p;
|
|
unsigned long deviceID;
|
|
unsigned int number_uarts = 0;
|
|
|
|
/* OxSemi Tornado devices are all 0xCxxx */
|
|
if (dev->vendor == PCI_VENDOR_ID_OXSEMI &&
|
|
(dev->device & 0xF000) != 0xC000)
|
|
return 0;
|
|
|
|
p = pci_iomap(dev, 0, 5);
|
|
if (p == NULL)
|
|
return -ENOMEM;
|
|
|
|
deviceID = ioread32(p);
|
|
/* Tornado device */
|
|
if (deviceID == 0x07000200) {
|
|
number_uarts = ioread8(p + 4);
|
|
printk(KERN_DEBUG
|
|
"%d ports detected on Oxford PCI Express device\n",
|
|
number_uarts);
|
|
}
|
|
pci_iounmap(dev, p);
|
|
return number_uarts;
|
|
}
|
|
|
|
static int
|
|
pci_default_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_port *port, int idx)
|
|
{
|
|
unsigned int bar, offset = board->first_offset, maxnr;
|
|
|
|
bar = FL_GET_BASE(board->flags);
|
|
if (board->flags & FL_BASE_BARS)
|
|
bar += idx;
|
|
else
|
|
offset += idx * board->uart_offset;
|
|
|
|
maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
|
|
(board->reg_shift + 3);
|
|
|
|
if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
|
|
return 1;
|
|
|
|
return setup_port(priv, port, bar, offset, board->reg_shift);
|
|
}
|
|
|
|
static int skip_tx_en_setup(struct serial_private *priv,
|
|
const struct pciserial_board *board,
|
|
struct uart_port *port, int idx)
|
|
{
|
|
port->flags |= UPF_NO_TXEN_TEST;
|
|
printk(KERN_DEBUG "serial8250: skipping TxEn test for device "
|
|
"[%04x:%04x] subsystem [%04x:%04x]\n",
|
|
priv->dev->vendor,
|
|
priv->dev->device,
|
|
priv->dev->subsystem_vendor,
|
|
priv->dev->subsystem_device);
|
|
|
|
return pci_default_setup(priv, board, port, idx);
|
|
}
|
|
|
|
/* This should be in linux/pci_ids.h */
|
|
#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
|
|
#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
|
|
#define PCI_DEVICE_ID_OCTPRO 0x0001
|
|
#define PCI_SUBDEVICE_ID_OCTPRO232 0x0108
|
|
#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208
|
|
#define PCI_SUBDEVICE_ID_POCTAL232 0x0308
|
|
#define PCI_SUBDEVICE_ID_POCTAL422 0x0408
|
|
#define PCI_VENDOR_ID_ADVANTECH 0x13fe
|
|
#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620
|
|
|
|
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
|
|
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
|
|
|
|
/*
|
|
* Master list of serial port init/setup/exit quirks.
|
|
* This does not describe the general nature of the port.
|
|
* (ie, baud base, number and location of ports, etc)
|
|
*
|
|
* This list is ordered alphabetically by vendor then device.
|
|
* Specific entries must come before more generic entries.
|
|
*/
|
|
static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
|
|
/*
|
|
* ADDI-DATA GmbH communication cards <info@addi-data.com>
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_ADDIDATA_OLD,
|
|
.device = PCI_DEVICE_ID_ADDIDATA_APCI7800,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = addidata_apci7800_setup,
|
|
},
|
|
/*
|
|
* AFAVLAB cards - these may be called via parport_serial
|
|
* It is not clear whether this applies to all products.
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_AFAVLAB,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = afavlab_setup,
|
|
},
|
|
/*
|
|
* HP Diva
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_HP,
|
|
.device = PCI_DEVICE_ID_HP_DIVA,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_hp_diva_init,
|
|
.setup = pci_hp_diva_setup,
|
|
},
|
|
/*
|
|
* Intel
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_80960_RP,
|
|
.subvendor = 0xe4bf,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_inteli960ni_init,
|
|
.setup = pci_default_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_8257X_SOL,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = skip_tx_en_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_82573L_SOL,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = skip_tx_en_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_INTEL,
|
|
.device = PCI_DEVICE_ID_INTEL_82573E_SOL,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = skip_tx_en_setup,
|
|
},
|
|
/*
|
|
* ITE
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_ITE,
|
|
.device = PCI_DEVICE_ID_ITE_8872,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ite887x_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_ite887x_exit),
|
|
},
|
|
/*
|
|
* National Instruments
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PCI23216,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_ni8420_exit),
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PCI2328,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_ni8420_exit),
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PCI2324,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_ni8420_exit),
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PCI2322,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_ni8420_exit),
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PCI2324I,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_ni8420_exit),
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PCI2322I,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_ni8420_exit),
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PXI8420_23216,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_ni8420_exit),
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PXI8420_2328,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_ni8420_exit),
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PXI8420_2324,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_ni8420_exit),
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PXI8420_2322,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_ni8420_exit),
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PXI8422_2324,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_ni8420_exit),
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_DEVICE_ID_NI_PXI8422_2322,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8420_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_ni8420_exit),
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NI,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_ni8430_init,
|
|
.setup = pci_ni8430_setup,
|
|
.exit = __devexit_p(pci_ni8430_exit),
|
|
},
|
|
/*
|
|
* Panacom
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_PANACOM,
|
|
.device = PCI_DEVICE_ID_PANACOM_QUADMODEM,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_plx9050_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_plx9050_exit),
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_PANACOM,
|
|
.device = PCI_DEVICE_ID_PANACOM_DUALMODEM,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_plx9050_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_plx9050_exit),
|
|
},
|
|
/*
|
|
* PLX
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_PLX,
|
|
.device = PCI_DEVICE_ID_PLX_9030,
|
|
.subvendor = PCI_SUBVENDOR_ID_PERLE,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_default_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_PLX,
|
|
.device = PCI_DEVICE_ID_PLX_9050,
|
|
.subvendor = PCI_SUBVENDOR_ID_EXSYS,
|
|
.subdevice = PCI_SUBDEVICE_ID_EXSYS_4055,
|
|
.init = pci_plx9050_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_plx9050_exit),
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_PLX,
|
|
.device = PCI_DEVICE_ID_PLX_9050,
|
|
.subvendor = PCI_SUBVENDOR_ID_KEYSPAN,
|
|
.subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2,
|
|
.init = pci_plx9050_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_plx9050_exit),
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_PLX,
|
|
.device = PCI_DEVICE_ID_PLX_9050,
|
|
.subvendor = PCI_VENDOR_ID_PLX,
|
|
.subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
|
|
.init = pci_plx9050_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_plx9050_exit),
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_PLX,
|
|
.device = PCI_DEVICE_ID_PLX_ROMULUS,
|
|
.subvendor = PCI_VENDOR_ID_PLX,
|
|
.subdevice = PCI_DEVICE_ID_PLX_ROMULUS,
|
|
.init = pci_plx9050_init,
|
|
.setup = pci_default_setup,
|
|
.exit = __devexit_p(pci_plx9050_exit),
|
|
},
|
|
/*
|
|
* SBS Technologies, Inc., PMC-OCTALPRO 232
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_SBSMODULARIO,
|
|
.device = PCI_DEVICE_ID_OCTPRO,
|
|
.subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
|
|
.subdevice = PCI_SUBDEVICE_ID_OCTPRO232,
|
|
.init = sbs_init,
|
|
.setup = sbs_setup,
|
|
.exit = __devexit_p(sbs_exit),
|
|
},
|
|
/*
|
|
* SBS Technologies, Inc., PMC-OCTALPRO 422
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_SBSMODULARIO,
|
|
.device = PCI_DEVICE_ID_OCTPRO,
|
|
.subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
|
|
.subdevice = PCI_SUBDEVICE_ID_OCTPRO422,
|
|
.init = sbs_init,
|
|
.setup = sbs_setup,
|
|
.exit = __devexit_p(sbs_exit),
|
|
},
|
|
/*
|
|
* SBS Technologies, Inc., P-Octal 232
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_SBSMODULARIO,
|
|
.device = PCI_DEVICE_ID_OCTPRO,
|
|
.subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
|
|
.subdevice = PCI_SUBDEVICE_ID_POCTAL232,
|
|
.init = sbs_init,
|
|
.setup = sbs_setup,
|
|
.exit = __devexit_p(sbs_exit),
|
|
},
|
|
/*
|
|
* SBS Technologies, Inc., P-Octal 422
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_SBSMODULARIO,
|
|
.device = PCI_DEVICE_ID_OCTPRO,
|
|
.subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
|
|
.subdevice = PCI_SUBDEVICE_ID_POCTAL422,
|
|
.init = sbs_init,
|
|
.setup = sbs_setup,
|
|
.exit = __devexit_p(sbs_exit),
|
|
},
|
|
/*
|
|
* SIIG cards - these may be called via parport_serial
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_SIIG,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_siig_init,
|
|
.setup = pci_siig_setup,
|
|
},
|
|
/*
|
|
* Titan cards
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_TITAN,
|
|
.device = PCI_DEVICE_ID_TITAN_400L,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = titan_400l_800l_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_TITAN,
|
|
.device = PCI_DEVICE_ID_TITAN_800L,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = titan_400l_800l_setup,
|
|
},
|
|
/*
|
|
* Timedia cards
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_TIMEDIA,
|
|
.device = PCI_DEVICE_ID_TIMEDIA_1889,
|
|
.subvendor = PCI_VENDOR_ID_TIMEDIA,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_timedia_init,
|
|
.setup = pci_timedia_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_TIMEDIA,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_timedia_setup,
|
|
},
|
|
/*
|
|
* Xircom cards
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_XIRCOM,
|
|
.device = PCI_DEVICE_ID_XIRCOM_X3201_MDM,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_xircom_init,
|
|
.setup = pci_default_setup,
|
|
},
|
|
/*
|
|
* Netmos cards - these may be called via parport_serial
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_NETMOS,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_netmos_init,
|
|
.setup = pci_default_setup,
|
|
},
|
|
/*
|
|
* For Oxford Semiconductor and Mainpine
|
|
*/
|
|
{
|
|
.vendor = PCI_VENDOR_ID_OXSEMI,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_oxsemi_tornado_init,
|
|
.setup = pci_default_setup,
|
|
},
|
|
{
|
|
.vendor = PCI_VENDOR_ID_MAINPINE,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.init = pci_oxsemi_tornado_init,
|
|
.setup = pci_default_setup,
|
|
},
|
|
/*
|
|
* Default "match everything" terminator entry
|
|
*/
|
|
{
|
|
.vendor = PCI_ANY_ID,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
.setup = pci_default_setup,
|
|
}
|
|
};
|
|
|
|
static inline int quirk_id_matches(u32 quirk_id, u32 dev_id)
|
|
{
|
|
return quirk_id == PCI_ANY_ID || quirk_id == dev_id;
|
|
}
|
|
|
|
static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
|
|
{
|
|
struct pci_serial_quirk *quirk;
|
|
|
|
for (quirk = pci_serial_quirks; ; quirk++)
|
|
if (quirk_id_matches(quirk->vendor, dev->vendor) &&
|
|
quirk_id_matches(quirk->device, dev->device) &&
|
|
quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
|
|
quirk_id_matches(quirk->subdevice, dev->subsystem_device))
|
|
break;
|
|
return quirk;
|
|
}
|
|
|
|
static inline int get_pci_irq(struct pci_dev *dev,
|
|
const struct pciserial_board *board)
|
|
{
|
|
if (board->flags & FL_NOIRQ)
|
|
return 0;
|
|
else
|
|
return dev->irq;
|
|
}
|
|
|
|
/*
|
|
* This is the configuration table for all of the PCI serial boards
|
|
* which we support. It is directly indexed by the pci_board_num_t enum
|
|
* value, which is encoded in the pci_device_id PCI probe table's
|
|
* driver_data member.
|
|
*
|
|
* The makeup of these names are:
|
|
* pbn_bn{_bt}_n_baud{_offsetinhex}
|
|
*
|
|
* bn = PCI BAR number
|
|
* bt = Index using PCI BARs
|
|
* n = number of serial ports
|
|
* baud = baud rate
|
|
* offsetinhex = offset for each sequential port (in hex)
|
|
*
|
|
* This table is sorted by (in order): bn, bt, baud, offsetindex, n.
|
|
*
|
|
* Please note: in theory if n = 1, _bt infix should make no difference.
|
|
* ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200
|
|
*/
|
|
enum pci_board_num_t {
|
|
pbn_default = 0,
|
|
|
|
pbn_b0_1_115200,
|
|
pbn_b0_2_115200,
|
|
pbn_b0_4_115200,
|
|
pbn_b0_5_115200,
|
|
pbn_b0_8_115200,
|
|
|
|
pbn_b0_1_921600,
|
|
pbn_b0_2_921600,
|
|
pbn_b0_4_921600,
|
|
|
|
pbn_b0_2_1130000,
|
|
|
|
pbn_b0_4_1152000,
|
|
|
|
pbn_b0_2_1843200,
|
|
pbn_b0_4_1843200,
|
|
|
|
pbn_b0_2_1843200_200,
|
|
pbn_b0_4_1843200_200,
|
|
pbn_b0_8_1843200_200,
|
|
|
|
pbn_b0_1_4000000,
|
|
|
|
pbn_b0_bt_1_115200,
|
|
pbn_b0_bt_2_115200,
|
|
pbn_b0_bt_8_115200,
|
|
|
|
pbn_b0_bt_1_460800,
|
|
pbn_b0_bt_2_460800,
|
|
pbn_b0_bt_4_460800,
|
|
|
|
pbn_b0_bt_1_921600,
|
|
pbn_b0_bt_2_921600,
|
|
pbn_b0_bt_4_921600,
|
|
pbn_b0_bt_8_921600,
|
|
|
|
pbn_b1_1_115200,
|
|
pbn_b1_2_115200,
|
|
pbn_b1_4_115200,
|
|
pbn_b1_8_115200,
|
|
pbn_b1_16_115200,
|
|
|
|
pbn_b1_1_921600,
|
|
pbn_b1_2_921600,
|
|
pbn_b1_4_921600,
|
|
pbn_b1_8_921600,
|
|
|
|
pbn_b1_2_1250000,
|
|
|
|
pbn_b1_bt_1_115200,
|
|
pbn_b1_bt_2_115200,
|
|
pbn_b1_bt_4_115200,
|
|
|
|
pbn_b1_bt_2_921600,
|
|
|
|
pbn_b1_1_1382400,
|
|
pbn_b1_2_1382400,
|
|
pbn_b1_4_1382400,
|
|
pbn_b1_8_1382400,
|
|
|
|
pbn_b2_1_115200,
|
|
pbn_b2_2_115200,
|
|
pbn_b2_4_115200,
|
|
pbn_b2_8_115200,
|
|
|
|
pbn_b2_1_460800,
|
|
pbn_b2_4_460800,
|
|
pbn_b2_8_460800,
|
|
pbn_b2_16_460800,
|
|
|
|
pbn_b2_1_921600,
|
|
pbn_b2_4_921600,
|
|
pbn_b2_8_921600,
|
|
|
|
pbn_b2_bt_1_115200,
|
|
pbn_b2_bt_2_115200,
|
|
pbn_b2_bt_4_115200,
|
|
|
|
pbn_b2_bt_2_921600,
|
|
pbn_b2_bt_4_921600,
|
|
|
|
pbn_b3_2_115200,
|
|
pbn_b3_4_115200,
|
|
pbn_b3_8_115200,
|
|
|
|
/*
|
|
* Board-specific versions.
|
|
*/
|
|
pbn_panacom,
|
|
pbn_panacom2,
|
|
pbn_panacom4,
|
|
pbn_exsys_4055,
|
|
pbn_plx_romulus,
|
|
pbn_oxsemi,
|
|
pbn_oxsemi_1_4000000,
|
|
pbn_oxsemi_2_4000000,
|
|
pbn_oxsemi_4_4000000,
|
|
pbn_oxsemi_8_4000000,
|
|
pbn_intel_i960,
|
|
pbn_sgi_ioc3,
|
|
pbn_computone_4,
|
|
pbn_computone_6,
|
|
pbn_computone_8,
|
|
pbn_sbsxrsio,
|
|
pbn_exar_XR17C152,
|
|
pbn_exar_XR17C154,
|
|
pbn_exar_XR17C158,
|
|
pbn_pasemi_1682M,
|
|
pbn_ni8430_2,
|
|
pbn_ni8430_4,
|
|
pbn_ni8430_8,
|
|
pbn_ni8430_16,
|
|
};
|
|
|
|
/*
|
|
* uart_offset - the space between channels
|
|
* reg_shift - describes how the UART registers are mapped
|
|
* to PCI memory by the card.
|
|
* For example IER register on SBS, Inc. PMC-OctPro is located at
|
|
* offset 0x10 from the UART base, while UART_IER is defined as 1
|
|
* in include/linux/serial_reg.h,
|
|
* see first lines of serial_in() and serial_out() in 8250.c
|
|
*/
|
|
|
|
static struct pciserial_board pci_boards[] __devinitdata = {
|
|
[pbn_default] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 1,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_1_115200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 1,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_2_115200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_4_115200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_5_115200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 5,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_8_115200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 8,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_1_921600] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 1,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_2_921600] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_4_921600] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b0_2_1130000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 1130000,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b0_4_1152000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 1152000,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b0_2_1843200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 1843200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_4_1843200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 1843200,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b0_2_1843200_200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 1843200,
|
|
.uart_offset = 0x200,
|
|
},
|
|
[pbn_b0_4_1843200_200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 1843200,
|
|
.uart_offset = 0x200,
|
|
},
|
|
[pbn_b0_8_1843200_200] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 8,
|
|
.base_baud = 1843200,
|
|
.uart_offset = 0x200,
|
|
},
|
|
[pbn_b0_1_4000000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 1,
|
|
.base_baud = 4000000,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b0_bt_1_115200] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 1,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_bt_2_115200] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 2,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_bt_8_115200] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 8,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b0_bt_1_460800] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 1,
|
|
.base_baud = 460800,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_bt_2_460800] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 2,
|
|
.base_baud = 460800,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_bt_4_460800] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 4,
|
|
.base_baud = 460800,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b0_bt_1_921600] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 1,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_bt_2_921600] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_bt_4_921600] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b0_bt_8_921600] = {
|
|
.flags = FL_BASE0|FL_BASE_BARS,
|
|
.num_ports = 8,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b1_1_115200] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 1,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_2_115200] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 2,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_4_115200] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 4,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_8_115200] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 8,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_16_115200] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 16,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b1_1_921600] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 1,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_2_921600] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_4_921600] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_8_921600] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 8,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_2_1250000] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 2,
|
|
.base_baud = 1250000,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b1_bt_1_115200] = {
|
|
.flags = FL_BASE1|FL_BASE_BARS,
|
|
.num_ports = 1,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_bt_2_115200] = {
|
|
.flags = FL_BASE1|FL_BASE_BARS,
|
|
.num_ports = 2,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_bt_4_115200] = {
|
|
.flags = FL_BASE1|FL_BASE_BARS,
|
|
.num_ports = 4,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b1_bt_2_921600] = {
|
|
.flags = FL_BASE1|FL_BASE_BARS,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b1_1_1382400] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 1,
|
|
.base_baud = 1382400,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_2_1382400] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 2,
|
|
.base_baud = 1382400,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_4_1382400] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 4,
|
|
.base_baud = 1382400,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b1_8_1382400] = {
|
|
.flags = FL_BASE1,
|
|
.num_ports = 8,
|
|
.base_baud = 1382400,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b2_1_115200] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 1,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_2_115200] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 2,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_4_115200] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 4,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_8_115200] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 8,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b2_1_460800] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 1,
|
|
.base_baud = 460800,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_4_460800] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 4,
|
|
.base_baud = 460800,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_8_460800] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 8,
|
|
.base_baud = 460800,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_16_460800] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 16,
|
|
.base_baud = 460800,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b2_1_921600] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 1,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_4_921600] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_8_921600] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 8,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b2_bt_1_115200] = {
|
|
.flags = FL_BASE2|FL_BASE_BARS,
|
|
.num_ports = 1,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_bt_2_115200] = {
|
|
.flags = FL_BASE2|FL_BASE_BARS,
|
|
.num_ports = 2,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_bt_4_115200] = {
|
|
.flags = FL_BASE2|FL_BASE_BARS,
|
|
.num_ports = 4,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b2_bt_2_921600] = {
|
|
.flags = FL_BASE2|FL_BASE_BARS,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b2_bt_4_921600] = {
|
|
.flags = FL_BASE2|FL_BASE_BARS,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
[pbn_b3_2_115200] = {
|
|
.flags = FL_BASE3,
|
|
.num_ports = 2,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b3_4_115200] = {
|
|
.flags = FL_BASE3,
|
|
.num_ports = 4,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_b3_8_115200] = {
|
|
.flags = FL_BASE3,
|
|
.num_ports = 8,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
/*
|
|
* Entries following this are board-specific.
|
|
*/
|
|
|
|
/*
|
|
* Panacom - IOMEM
|
|
*/
|
|
[pbn_panacom] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x400,
|
|
.reg_shift = 7,
|
|
},
|
|
[pbn_panacom2] = {
|
|
.flags = FL_BASE2|FL_BASE_BARS,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x400,
|
|
.reg_shift = 7,
|
|
},
|
|
[pbn_panacom4] = {
|
|
.flags = FL_BASE2|FL_BASE_BARS,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x400,
|
|
.reg_shift = 7,
|
|
},
|
|
|
|
[pbn_exsys_4055] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 4,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
|
|
/* I think this entry is broken - the first_offset looks wrong --rmk */
|
|
[pbn_plx_romulus] = {
|
|
.flags = FL_BASE2,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8 << 2,
|
|
.reg_shift = 2,
|
|
.first_offset = 0x03,
|
|
},
|
|
|
|
/*
|
|
* This board uses the size of PCI Base region 0 to
|
|
* signal now many ports are available
|
|
*/
|
|
[pbn_oxsemi] = {
|
|
.flags = FL_BASE0|FL_REGION_SZ_CAP,
|
|
.num_ports = 32,
|
|
.base_baud = 115200,
|
|
.uart_offset = 8,
|
|
},
|
|
[pbn_oxsemi_1_4000000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 1,
|
|
.base_baud = 4000000,
|
|
.uart_offset = 0x200,
|
|
.first_offset = 0x1000,
|
|
},
|
|
[pbn_oxsemi_2_4000000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 4000000,
|
|
.uart_offset = 0x200,
|
|
.first_offset = 0x1000,
|
|
},
|
|
[pbn_oxsemi_4_4000000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 4000000,
|
|
.uart_offset = 0x200,
|
|
.first_offset = 0x1000,
|
|
},
|
|
[pbn_oxsemi_8_4000000] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 8,
|
|
.base_baud = 4000000,
|
|
.uart_offset = 0x200,
|
|
.first_offset = 0x1000,
|
|
},
|
|
|
|
|
|
/*
|
|
* EKF addition for i960 Boards form EKF with serial port.
|
|
* Max 256 ports.
|
|
*/
|
|
[pbn_intel_i960] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 32,
|
|
.base_baud = 921600,
|
|
.uart_offset = 8 << 2,
|
|
.reg_shift = 2,
|
|
.first_offset = 0x10000,
|
|
},
|
|
[pbn_sgi_ioc3] = {
|
|
.flags = FL_BASE0|FL_NOIRQ,
|
|
.num_ports = 1,
|
|
.base_baud = 458333,
|
|
.uart_offset = 8,
|
|
.reg_shift = 0,
|
|
.first_offset = 0x20178,
|
|
},
|
|
|
|
/*
|
|
* Computone - uses IOMEM.
|
|
*/
|
|
[pbn_computone_4] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x40,
|
|
.reg_shift = 2,
|
|
.first_offset = 0x200,
|
|
},
|
|
[pbn_computone_6] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 6,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x40,
|
|
.reg_shift = 2,
|
|
.first_offset = 0x200,
|
|
},
|
|
[pbn_computone_8] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 8,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x40,
|
|
.reg_shift = 2,
|
|
.first_offset = 0x200,
|
|
},
|
|
[pbn_sbsxrsio] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 8,
|
|
.base_baud = 460800,
|
|
.uart_offset = 256,
|
|
.reg_shift = 4,
|
|
},
|
|
/*
|
|
* Exar Corp. XR17C15[248] Dual/Quad/Octal UART
|
|
* Only basic 16550A support.
|
|
* XR17C15[24] are not tested, but they should work.
|
|
*/
|
|
[pbn_exar_XR17C152] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x200,
|
|
},
|
|
[pbn_exar_XR17C154] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x200,
|
|
},
|
|
[pbn_exar_XR17C158] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 8,
|
|
.base_baud = 921600,
|
|
.uart_offset = 0x200,
|
|
},
|
|
/*
|
|
* PA Semi PWRficient PA6T-1682M on-chip UART
|
|
*/
|
|
[pbn_pasemi_1682M] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 1,
|
|
.base_baud = 8333333,
|
|
},
|
|
/*
|
|
* National Instruments 843x
|
|
*/
|
|
[pbn_ni8430_16] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 16,
|
|
.base_baud = 3686400,
|
|
.uart_offset = 0x10,
|
|
.first_offset = 0x800,
|
|
},
|
|
[pbn_ni8430_8] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 8,
|
|
.base_baud = 3686400,
|
|
.uart_offset = 0x10,
|
|
.first_offset = 0x800,
|
|
},
|
|
[pbn_ni8430_4] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 4,
|
|
.base_baud = 3686400,
|
|
.uart_offset = 0x10,
|
|
.first_offset = 0x800,
|
|
},
|
|
[pbn_ni8430_2] = {
|
|
.flags = FL_BASE0,
|
|
.num_ports = 2,
|
|
.base_baud = 3686400,
|
|
.uart_offset = 0x10,
|
|
.first_offset = 0x800,
|
|
},
|
|
};
|
|
|
|
static const struct pci_device_id softmodem_blacklist[] = {
|
|
{ PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
|
|
};
|
|
|
|
/*
|
|
* Given a complete unknown PCI device, try to use some heuristics to
|
|
* guess what the configuration might be, based on the pitiful PCI
|
|
* serial specs. Returns 0 on success, 1 on failure.
|
|
*/
|
|
static int __devinit
|
|
serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
|
|
{
|
|
const struct pci_device_id *blacklist;
|
|
int num_iomem, num_port, first_port = -1, i;
|
|
|
|
/*
|
|
* If it is not a communications device or the programming
|
|
* interface is greater than 6, give up.
|
|
*
|
|
* (Should we try to make guesses for multiport serial devices
|
|
* later?)
|
|
*/
|
|
if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
|
|
((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
|
|
(dev->class & 0xff) > 6)
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* Do not access blacklisted devices that are known not to
|
|
* feature serial ports.
|
|
*/
|
|
for (blacklist = softmodem_blacklist;
|
|
blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist);
|
|
blacklist++) {
|
|
if (dev->vendor == blacklist->vendor &&
|
|
dev->device == blacklist->device)
|
|
return -ENODEV;
|
|
}
|
|
|
|
num_iomem = num_port = 0;
|
|
for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
|
|
if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
|
|
num_port++;
|
|
if (first_port == -1)
|
|
first_port = i;
|
|
}
|
|
if (pci_resource_flags(dev, i) & IORESOURCE_MEM)
|
|
num_iomem++;
|
|
}
|
|
|
|
/*
|
|
* If there is 1 or 0 iomem regions, and exactly one port,
|
|
* use it. We guess the number of ports based on the IO
|
|
* region size.
|
|
*/
|
|
if (num_iomem <= 1 && num_port == 1) {
|
|
board->flags = first_port;
|
|
board->num_ports = pci_resource_len(dev, first_port) / 8;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Now guess if we've got a board which indexes by BARs.
|
|
* Each IO BAR should be 8 bytes, and they should follow
|
|
* consecutively.
|
|
*/
|
|
first_port = -1;
|
|
num_port = 0;
|
|
for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
|
|
if (pci_resource_flags(dev, i) & IORESOURCE_IO &&
|
|
pci_resource_len(dev, i) == 8 &&
|
|
(first_port == -1 || (first_port + num_port) == i)) {
|
|
num_port++;
|
|
if (first_port == -1)
|
|
first_port = i;
|
|
}
|
|
}
|
|
|
|
if (num_port > 1) {
|
|
board->flags = first_port | FL_BASE_BARS;
|
|
board->num_ports = num_port;
|
|
return 0;
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static inline int
|
|
serial_pci_matches(const struct pciserial_board *board,
|
|
const struct pciserial_board *guessed)
|
|
{
|
|
return
|
|
board->num_ports == guessed->num_ports &&
|
|
board->base_baud == guessed->base_baud &&
|
|
board->uart_offset == guessed->uart_offset &&
|
|
board->reg_shift == guessed->reg_shift &&
|
|
board->first_offset == guessed->first_offset;
|
|
}
|
|
|
|
struct serial_private *
|
|
pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
|
|
{
|
|
struct uart_port serial_port;
|
|
struct serial_private *priv;
|
|
struct pci_serial_quirk *quirk;
|
|
int rc, nr_ports, i;
|
|
|
|
nr_ports = board->num_ports;
|
|
|
|
/*
|
|
* Find an init and setup quirks.
|
|
*/
|
|
quirk = find_quirk(dev);
|
|
|
|
/*
|
|
* Run the new-style initialization function.
|
|
* The initialization function returns:
|
|
* <0 - error
|
|
* 0 - use board->num_ports
|
|
* >0 - number of ports
|
|
*/
|
|
if (quirk->init) {
|
|
rc = quirk->init(dev);
|
|
if (rc < 0) {
|
|
priv = ERR_PTR(rc);
|
|
goto err_out;
|
|
}
|
|
if (rc)
|
|
nr_ports = rc;
|
|
}
|
|
|
|
priv = kzalloc(sizeof(struct serial_private) +
|
|
sizeof(unsigned int) * nr_ports,
|
|
GFP_KERNEL);
|
|
if (!priv) {
|
|
priv = ERR_PTR(-ENOMEM);
|
|
goto err_deinit;
|
|
}
|
|
|
|
priv->dev = dev;
|
|
priv->quirk = quirk;
|
|
|
|
memset(&serial_port, 0, sizeof(struct uart_port));
|
|
serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
|
|
serial_port.uartclk = board->base_baud * 16;
|
|
serial_port.irq = get_pci_irq(dev, board);
|
|
serial_port.dev = &dev->dev;
|
|
|
|
for (i = 0; i < nr_ports; i++) {
|
|
if (quirk->setup(priv, board, &serial_port, i))
|
|
break;
|
|
|
|
#ifdef SERIAL_DEBUG_PCI
|
|
printk(KERN_DEBUG "Setup PCI port: port %x, irq %d, type %d\n",
|
|
serial_port.iobase, serial_port.irq, serial_port.iotype);
|
|
#endif
|
|
|
|
priv->line[i] = serial8250_register_port(&serial_port);
|
|
if (priv->line[i] < 0) {
|
|
printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
|
|
break;
|
|
}
|
|
}
|
|
priv->nr = i;
|
|
return priv;
|
|
|
|
err_deinit:
|
|
if (quirk->exit)
|
|
quirk->exit(dev);
|
|
err_out:
|
|
return priv;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pciserial_init_ports);
|
|
|
|
void pciserial_remove_ports(struct serial_private *priv)
|
|
{
|
|
struct pci_serial_quirk *quirk;
|
|
int i;
|
|
|
|
for (i = 0; i < priv->nr; i++)
|
|
serial8250_unregister_port(priv->line[i]);
|
|
|
|
for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
|
|
if (priv->remapped_bar[i])
|
|
iounmap(priv->remapped_bar[i]);
|
|
priv->remapped_bar[i] = NULL;
|
|
}
|
|
|
|
/*
|
|
* Find the exit quirks.
|
|
*/
|
|
quirk = find_quirk(priv->dev);
|
|
if (quirk->exit)
|
|
quirk->exit(priv->dev);
|
|
|
|
kfree(priv);
|
|
}
|
|
EXPORT_SYMBOL_GPL(pciserial_remove_ports);
|
|
|
|
void pciserial_suspend_ports(struct serial_private *priv)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < priv->nr; i++)
|
|
if (priv->line[i] >= 0)
|
|
serial8250_suspend_port(priv->line[i]);
|
|
}
|
|
EXPORT_SYMBOL_GPL(pciserial_suspend_ports);
|
|
|
|
void pciserial_resume_ports(struct serial_private *priv)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* Ensure that the board is correctly configured.
|
|
*/
|
|
if (priv->quirk->init)
|
|
priv->quirk->init(priv->dev);
|
|
|
|
for (i = 0; i < priv->nr; i++)
|
|
if (priv->line[i] >= 0)
|
|
serial8250_resume_port(priv->line[i]);
|
|
}
|
|
EXPORT_SYMBOL_GPL(pciserial_resume_ports);
|
|
|
|
/*
|
|
* Probe one serial board. Unfortunately, there is no rhyme nor reason
|
|
* to the arrangement of serial ports on a PCI card.
|
|
*/
|
|
static int __devinit
|
|
pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
|
|
{
|
|
struct serial_private *priv;
|
|
const struct pciserial_board *board;
|
|
struct pciserial_board tmp;
|
|
int rc;
|
|
|
|
if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
|
|
printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
|
|
ent->driver_data);
|
|
return -EINVAL;
|
|
}
|
|
|
|
board = &pci_boards[ent->driver_data];
|
|
|
|
rc = pci_enable_device(dev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (ent->driver_data == pbn_default) {
|
|
/*
|
|
* Use a copy of the pci_board entry for this;
|
|
* avoid changing entries in the table.
|
|
*/
|
|
memcpy(&tmp, board, sizeof(struct pciserial_board));
|
|
board = &tmp;
|
|
|
|
/*
|
|
* We matched one of our class entries. Try to
|
|
* determine the parameters of this board.
|
|
*/
|
|
rc = serial_pci_guess_board(dev, &tmp);
|
|
if (rc)
|
|
goto disable;
|
|
} else {
|
|
/*
|
|
* We matched an explicit entry. If we are able to
|
|
* detect this boards settings with our heuristic,
|
|
* then we no longer need this entry.
|
|
*/
|
|
memcpy(&tmp, &pci_boards[pbn_default],
|
|
sizeof(struct pciserial_board));
|
|
rc = serial_pci_guess_board(dev, &tmp);
|
|
if (rc == 0 && serial_pci_matches(board, &tmp))
|
|
moan_device("Redundant entry in serial pci_table.",
|
|
dev);
|
|
}
|
|
|
|
priv = pciserial_init_ports(dev, board);
|
|
if (!IS_ERR(priv)) {
|
|
pci_set_drvdata(dev, priv);
|
|
return 0;
|
|
}
|
|
|
|
rc = PTR_ERR(priv);
|
|
|
|
disable:
|
|
pci_disable_device(dev);
|
|
return rc;
|
|
}
|
|
|
|
static void __devexit pciserial_remove_one(struct pci_dev *dev)
|
|
{
|
|
struct serial_private *priv = pci_get_drvdata(dev);
|
|
|
|
pci_set_drvdata(dev, NULL);
|
|
|
|
pciserial_remove_ports(priv);
|
|
|
|
pci_disable_device(dev);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
|
|
{
|
|
struct serial_private *priv = pci_get_drvdata(dev);
|
|
|
|
if (priv)
|
|
pciserial_suspend_ports(priv);
|
|
|
|
pci_save_state(dev);
|
|
pci_set_power_state(dev, pci_choose_state(dev, state));
|
|
return 0;
|
|
}
|
|
|
|
static int pciserial_resume_one(struct pci_dev *dev)
|
|
{
|
|
int err;
|
|
struct serial_private *priv = pci_get_drvdata(dev);
|
|
|
|
pci_set_power_state(dev, PCI_D0);
|
|
pci_restore_state(dev);
|
|
|
|
if (priv) {
|
|
/*
|
|
* The device may have been disabled. Re-enable it.
|
|
*/
|
|
err = pci_enable_device(dev);
|
|
/* FIXME: We cannot simply error out here */
|
|
if (err)
|
|
printk(KERN_ERR "pciserial: Unable to re-enable ports, trying to continue.\n");
|
|
pciserial_resume_ports(priv);
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static struct pci_device_id serial_pci_tbl[] = {
|
|
/* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */
|
|
{ PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
|
|
PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0,
|
|
pbn_b2_8_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
|
|
pbn_b1_8_1382400 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
|
|
pbn_b1_4_1382400 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
|
|
pbn_b1_2_1382400 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
|
|
pbn_b1_8_1382400 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
|
|
pbn_b1_4_1382400 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
|
|
pbn_b1_2_1382400 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0,
|
|
pbn_b1_8_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0,
|
|
pbn_b1_8_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0,
|
|
pbn_b1_4_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0,
|
|
pbn_b1_4_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0,
|
|
pbn_b1_2_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0,
|
|
pbn_b1_8_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0,
|
|
pbn_b1_8_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0,
|
|
pbn_b1_4_921600 },
|
|
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0,
|
|
pbn_b1_2_1250000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0,
|
|
pbn_b0_2_1843200 },
|
|
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0,
|
|
pbn_b0_4_1843200 },
|
|
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
|
|
PCI_VENDOR_ID_AFAVLAB,
|
|
PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0,
|
|
pbn_b0_4_1152000 },
|
|
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0,
|
|
pbn_b0_2_1843200_200 },
|
|
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232, 0, 0,
|
|
pbn_b0_4_1843200_200 },
|
|
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232, 0, 0,
|
|
pbn_b0_8_1843200_200 },
|
|
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1, 0, 0,
|
|
pbn_b0_2_1843200_200 },
|
|
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2, 0, 0,
|
|
pbn_b0_4_1843200_200 },
|
|
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4, 0, 0,
|
|
pbn_b0_8_1843200_200 },
|
|
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2, 0, 0,
|
|
pbn_b0_2_1843200_200 },
|
|
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4, 0, 0,
|
|
pbn_b0_4_1843200_200 },
|
|
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8, 0, 0,
|
|
pbn_b0_8_1843200_200 },
|
|
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485, 0, 0,
|
|
pbn_b0_2_1843200_200 },
|
|
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485, 0, 0,
|
|
pbn_b0_4_1843200_200 },
|
|
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
|
|
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
|
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0,
|
|
pbn_b0_8_1843200_200 },
|
|
|
|
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_1_115200 },
|
|
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_4_115200 },
|
|
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_4_115200 },
|
|
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_8_115200 },
|
|
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_8_460800 },
|
|
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_8_115200 },
|
|
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_2_921600 },
|
|
/*
|
|
* VScom SPCOM800, from sl@s.pl
|
|
*/
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_8_921600 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_4_921600 },
|
|
/* Unknown card - subdevice 0x1584 */
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_VENDOR_ID_PLX,
|
|
PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
|
|
pbn_b0_4_115200 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_SUBVENDOR_ID_KEYSPAN,
|
|
PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
|
|
pbn_panacom },
|
|
{ PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_panacom4 },
|
|
{ PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_panacom2 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
|
|
PCI_VENDOR_ID_ESDGMBH,
|
|
PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0,
|
|
pbn_b2_4_115200 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
|
|
PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
|
|
pbn_b2_4_460800 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
|
|
PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
|
|
pbn_b2_8_460800 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
|
|
PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
|
|
pbn_b2_16_460800 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
|
|
PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
|
|
pbn_b2_16_460800 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_SUBVENDOR_ID_CHASE_PCIRAS,
|
|
PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
|
|
pbn_b2_4_460800 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_SUBVENDOR_ID_CHASE_PCIRAS,
|
|
PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
|
|
pbn_b2_8_460800 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
|
|
PCI_SUBVENDOR_ID_EXSYS,
|
|
PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
|
|
pbn_exsys_4055 },
|
|
/*
|
|
* Megawolf Romulus PCI Serial Card, from Mike Hudson
|
|
* (Exoray@isys.ca)
|
|
*/
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
|
|
0x10b5, 0x106a, 0, 0,
|
|
pbn_plx_romulus },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_4_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_2_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_8_115200 },
|
|
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_8_115200 },
|
|
{ PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
|
|
PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4,
|
|
0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
|
|
PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
|
|
0, 0,
|
|
pbn_b0_4_1152000 },
|
|
|
|
/*
|
|
* The below card is a little controversial since it is the
|
|
* subject of a PCI vendor/device ID clash. (See
|
|
* www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
|
|
* For now just used the hex ID 0x950a.
|
|
*/
|
|
{ PCI_VENDOR_ID_OXSEMI, 0x950a,
|
|
PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL, 0, 0,
|
|
pbn_b0_2_115200 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0x950a,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_2_1130000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950,
|
|
PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0,
|
|
pbn_b0_1_921600 },
|
|
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_4_115200 },
|
|
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_921600 },
|
|
|
|
/*
|
|
* Oxford Semiconductor Inc. Tornado PCI express device range.
|
|
*/
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_2_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_2_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_4_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_4_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_8_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_8_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
/*
|
|
* Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado
|
|
*/
|
|
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */
|
|
PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0,
|
|
pbn_oxsemi_1_4000000 },
|
|
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */
|
|
PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0,
|
|
pbn_oxsemi_2_4000000 },
|
|
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */
|
|
PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0,
|
|
pbn_oxsemi_4_4000000 },
|
|
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */
|
|
PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0,
|
|
pbn_oxsemi_8_4000000 },
|
|
/*
|
|
* SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
|
|
* from skokodyn@yahoo.com
|
|
*/
|
|
{ PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
|
|
PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0,
|
|
pbn_sbsxrsio },
|
|
{ PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
|
|
PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0,
|
|
pbn_sbsxrsio },
|
|
{ PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
|
|
PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0,
|
|
pbn_sbsxrsio },
|
|
{ PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
|
|
PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0,
|
|
pbn_sbsxrsio },
|
|
|
|
/*
|
|
* Digitan DS560-558, from jimd@esoft.com
|
|
*/
|
|
{ PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_1_115200 },
|
|
|
|
/*
|
|
* Titan Electronic cards
|
|
* The 400L and 800L have a custom setup quirk.
|
|
*/
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_2_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_1_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_2_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_4_921600 },
|
|
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_8_921600 },
|
|
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_1_460800 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_1_460800 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_1_460800 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_2_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_2_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_2_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_4_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_4_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_4_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_4_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_4_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_4_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_8_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_8_921600 },
|
|
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_8_921600 },
|
|
|
|
/*
|
|
* Computone devices submitted by Doug McNash dmcnash@computone.com
|
|
*/
|
|
{ PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
|
|
PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4,
|
|
0, 0, pbn_computone_4 },
|
|
{ PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
|
|
PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8,
|
|
0, 0, pbn_computone_8 },
|
|
{ PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
|
|
PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6,
|
|
0, 0, pbn_computone_6 },
|
|
|
|
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_oxsemi },
|
|
{ PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
|
|
PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_1_921600 },
|
|
|
|
/*
|
|
* AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org>
|
|
*/
|
|
{ PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_8_115200 },
|
|
{ PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_8_115200 },
|
|
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_4_460800 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_4_460800 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_460800 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_460800 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_2_460800 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_1_115200 },
|
|
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_bt_1_460800 },
|
|
|
|
/*
|
|
* Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408).
|
|
* Cards are identified by their subsystem vendor IDs, which
|
|
* (in hex) match the model number.
|
|
*
|
|
* Note that JC140x are RS422/485 cards which require ox950
|
|
* ACR = 0x10, and as such are not currently fully supported.
|
|
*/
|
|
{ PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
|
|
0x1204, 0x0004, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
{ PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
|
|
0x1208, 0x0004, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
|
|
0x1402, 0x0002, 0, 0,
|
|
pbn_b0_2_921600 }, */
|
|
/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
|
|
0x1404, 0x0004, 0, 0,
|
|
pbn_b0_4_921600 }, */
|
|
{ PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1,
|
|
0x1208, 0x0004, 0, 0,
|
|
pbn_b0_4_921600 },
|
|
|
|
/*
|
|
* Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com
|
|
*/
|
|
{ PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_1_1382400 },
|
|
|
|
/*
|
|
* Dell Remote Access Card III - Tim_T_Murphy@Dell.com
|
|
*/
|
|
{ PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_1_1382400 },
|
|
|
|
/*
|
|
* RAStel 2 port modem, gerg@moreton.com.au
|
|
*/
|
|
{ PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_bt_2_115200 },
|
|
|
|
/*
|
|
* EKF addition for i960 Boards form EKF with serial port
|
|
*/
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP,
|
|
0xE4BF, PCI_ANY_ID, 0, 0,
|
|
pbn_intel_i960 },
|
|
|
|
/*
|
|
* Xircom Cardbus/Ethernet combos
|
|
*/
|
|
{ PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_115200 },
|
|
/*
|
|
* Xircom RBM56G cardbus modem - Dirk Arnold (temp entry)
|
|
*/
|
|
{ PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_115200 },
|
|
|
|
/*
|
|
* Untested PCI modems, sent in from various folks...
|
|
*/
|
|
|
|
/*
|
|
* Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de>
|
|
*/
|
|
{ PCI_VENDOR_ID_ROCKWELL, 0x1004,
|
|
0x1048, 0x1500, 0, 0,
|
|
pbn_b1_1_115200 },
|
|
|
|
{ PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
|
|
0xFF00, 0, 0, 0,
|
|
pbn_sgi_ioc3 },
|
|
|
|
/*
|
|
* HP Diva card
|
|
*/
|
|
{ PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
|
|
PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0,
|
|
pbn_b1_1_115200 },
|
|
{ PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_5_115200 },
|
|
{ PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b2_1_115200 },
|
|
|
|
{ PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b3_2_115200 },
|
|
{ PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b3_4_115200 },
|
|
{ PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b3_8_115200 },
|
|
|
|
/*
|
|
* Exar Corp. XR17C15[248] Dual/Quad/Octal UART
|
|
*/
|
|
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0,
|
|
0, pbn_exar_XR17C152 },
|
|
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0,
|
|
0, pbn_exar_XR17C154 },
|
|
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0,
|
|
0, pbn_exar_XR17C158 },
|
|
|
|
/*
|
|
* Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
|
|
*/
|
|
{ PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b0_1_115200 },
|
|
/*
|
|
* ITE
|
|
*/
|
|
{ PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
pbn_b1_bt_1_115200 },
|
|
|
|
/*
|
|
* IntaShield IS-200
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */
|
|
pbn_b2_2_115200 },
|
|
/*
|
|
* IntaShield IS-400
|
|
*/
|
|
{ PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */
|
|
pbn_b2_4_115200 },
|
|
/*
|
|
* Perle PCI-RAS cards
|
|
*/
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
|
|
PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4,
|
|
0, 0, pbn_b2_4_921600 },
|
|
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
|
|
PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8,
|
|
0, 0, pbn_b2_8_921600 },
|
|
|
|
/*
|
|
* Mainpine series cards: Fairly standard layout but fools
|
|
* parts of the autodetect in some cases and uses otherwise
|
|
* unmatched communications subclasses in the PCI Express case
|
|
*/
|
|
|
|
{ /* RockForceDUO */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0200,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ /* RockForceQUATRO */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0300,
|
|
0, 0, pbn_b0_4_115200 },
|
|
{ /* RockForceDUO+ */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0400,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ /* RockForceQUATRO+ */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0500,
|
|
0, 0, pbn_b0_4_115200 },
|
|
{ /* RockForce+ */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0600,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ /* RockForce+ */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0700,
|
|
0, 0, pbn_b0_4_115200 },
|
|
{ /* RockForceOCTO+ */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0800,
|
|
0, 0, pbn_b0_8_115200 },
|
|
{ /* RockForceDUO+ */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0C00,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ /* RockForceQUARTRO+ */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x0D00,
|
|
0, 0, pbn_b0_4_115200 },
|
|
{ /* RockForceOCTO+ */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x1D00,
|
|
0, 0, pbn_b0_8_115200 },
|
|
{ /* RockForceD1 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x2000,
|
|
0, 0, pbn_b0_1_115200 },
|
|
{ /* RockForceF1 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x2100,
|
|
0, 0, pbn_b0_1_115200 },
|
|
{ /* RockForceD2 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x2200,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ /* RockForceF2 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x2300,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ /* RockForceD4 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x2400,
|
|
0, 0, pbn_b0_4_115200 },
|
|
{ /* RockForceF4 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x2500,
|
|
0, 0, pbn_b0_4_115200 },
|
|
{ /* RockForceD8 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x2600,
|
|
0, 0, pbn_b0_8_115200 },
|
|
{ /* RockForceF8 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x2700,
|
|
0, 0, pbn_b0_8_115200 },
|
|
{ /* IQ Express D1 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x3000,
|
|
0, 0, pbn_b0_1_115200 },
|
|
{ /* IQ Express F1 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x3100,
|
|
0, 0, pbn_b0_1_115200 },
|
|
{ /* IQ Express D2 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x3200,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ /* IQ Express F2 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x3300,
|
|
0, 0, pbn_b0_2_115200 },
|
|
{ /* IQ Express D4 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x3400,
|
|
0, 0, pbn_b0_4_115200 },
|
|
{ /* IQ Express F4 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x3500,
|
|
0, 0, pbn_b0_4_115200 },
|
|
{ /* IQ Express D8 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x3C00,
|
|
0, 0, pbn_b0_8_115200 },
|
|
{ /* IQ Express F8 */
|
|
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
|
|
PCI_VENDOR_ID_MAINPINE, 0x3D00,
|
|
0, 0, pbn_b0_8_115200 },
|
|
|
|
|
|
/*
|
|
* PA Semi PA6T-1682M on-chip UART
|
|
*/
|
|
{ PCI_VENDOR_ID_PASEMI, 0xa004,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_pasemi_1682M },
|
|
|
|
/*
|
|
* National Instruments
|
|
*/
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI23216,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_16_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2328,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_8_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_4_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324I,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_4_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322I,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_23216,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_16_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2328,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_8_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2324,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_4_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2322,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2324,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_4_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2322,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_b1_bt_2_115200 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2322,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_2 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2322,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_2 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2324,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_4 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2324,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_4 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2328,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_8 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2328,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_8 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_23216,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_16 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_23216,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_16 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2322,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_2 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2322,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_2 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2324,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_4 },
|
|
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
pbn_ni8430_4 },
|
|
|
|
/*
|
|
* ADDI-DATA GmbH communication cards <info@addi-data.com>
|
|
*/
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7500,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_4_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7420,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_2_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7300,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_1_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA_OLD,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7800,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b1_8_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7500_2,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_4_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7420_2,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_2_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7300_2,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_1_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7500_3,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_4_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7420_3,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_2_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7300_3,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_1_115200 },
|
|
|
|
{ PCI_VENDOR_ID_ADDIDATA,
|
|
PCI_DEVICE_ID_ADDIDATA_APCI7800_3,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0,
|
|
0,
|
|
pbn_b0_8_115200 },
|
|
|
|
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
|
|
PCI_VENDOR_ID_IBM, 0x0299,
|
|
0, 0, pbn_b0_bt_2_115200 },
|
|
|
|
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
|
|
0xA000, 0x1000,
|
|
0, 0, pbn_b0_1_115200 },
|
|
|
|
/*
|
|
* These entries match devices with class COMMUNICATION_SERIAL,
|
|
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
|
|
*/
|
|
{ PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_COMMUNICATION_SERIAL << 8,
|
|
0xffff00, pbn_default },
|
|
{ PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_COMMUNICATION_MODEM << 8,
|
|
0xffff00, pbn_default },
|
|
{ PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_COMMUNICATION_MULTISERIAL << 8,
|
|
0xffff00, pbn_default },
|
|
{ 0, }
|
|
};
|
|
|
|
static struct pci_driver serial_pci_driver = {
|
|
.name = "serial",
|
|
.probe = pciserial_init_one,
|
|
.remove = __devexit_p(pciserial_remove_one),
|
|
#ifdef CONFIG_PM
|
|
.suspend = pciserial_suspend_one,
|
|
.resume = pciserial_resume_one,
|
|
#endif
|
|
.id_table = serial_pci_tbl,
|
|
};
|
|
|
|
static int __init serial8250_pci_init(void)
|
|
{
|
|
return pci_register_driver(&serial_pci_driver);
|
|
}
|
|
|
|
static void __exit serial8250_pci_exit(void)
|
|
{
|
|
pci_unregister_driver(&serial_pci_driver);
|
|
}
|
|
|
|
module_init(serial8250_pci_init);
|
|
module_exit(serial8250_pci_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
|
|
MODULE_DEVICE_TABLE(pci, serial_pci_tbl);
|