mirror of https://gitee.com/openkylin/linux.git
66 lines
1.6 KiB
Plaintext
66 lines
1.6 KiB
Plaintext
STMicroelectronics STM32 Reset and Clock Controller
|
|
===================================================
|
|
|
|
The RCC IP is both a reset and a clock controller. This documentation only
|
|
describes the clock part.
|
|
|
|
Please also refer to clock-bindings.txt in this directory for common clock
|
|
controller binding usage.
|
|
|
|
Required properties:
|
|
- compatible: Should be "st,stm32f42xx-rcc"
|
|
- reg: should be register base and length as documented in the
|
|
datasheet
|
|
- #clock-cells: 2, device nodes should specify the clock in their "clocks"
|
|
property, containing a phandle to the clock device node, an index selecting
|
|
between gated clocks and other clocks and an index specifying the clock to
|
|
use.
|
|
|
|
Example:
|
|
|
|
rcc: rcc@40023800 {
|
|
#clock-cells = <2>
|
|
compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
|
|
reg = <0x40023800 0x400>;
|
|
};
|
|
|
|
Specifying gated clocks
|
|
=======================
|
|
|
|
The primary index must be set to 0.
|
|
|
|
The secondary index is the bit number within the RCC register bank, starting
|
|
from the first RCC clock enable register (RCC_AHB1ENR, address offset 0x30).
|
|
|
|
It is calculated as: index = register_offset / 4 * 32 + bit_offset.
|
|
Where bit_offset is the bit offset within the register (LSB is 0, MSB is 31).
|
|
|
|
Example:
|
|
|
|
/* Gated clock, AHB1 bit 0 (GPIOA) */
|
|
... {
|
|
clocks = <&rcc 0 0>
|
|
};
|
|
|
|
/* Gated clock, AHB2 bit 4 (CRYP) */
|
|
... {
|
|
clocks = <&rcc 0 36>
|
|
};
|
|
|
|
Specifying other clocks
|
|
=======================
|
|
|
|
The primary index must be set to 1.
|
|
|
|
The secondary index is bound with the following magic numbers:
|
|
|
|
0 SYSTICK
|
|
1 FCLK
|
|
|
|
Example:
|
|
|
|
/* Misc clock, FCLK */
|
|
... {
|
|
clocks = <&rcc 1 1>
|
|
};
|