mirror of https://gitee.com/openkylin/linux.git
883 lines
20 KiB
C
883 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* linux/arch/arm/mach-pxa/cm-x300.c
|
|
*
|
|
* Support for the CompuLab CM-X300 modules
|
|
*
|
|
* Copyright (C) 2008,2009 CompuLab Ltd.
|
|
*
|
|
* Mike Rapoport <mike@compulab.co.il>
|
|
* Igor Grinberg <grinberg@compulab.co.il>
|
|
*/
|
|
#define pr_fmt(fmt) "%s: " fmt, __func__
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/gpio/machine.h>
|
|
#include <linux/dm9000.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/platform_data/rtc-v3020.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/pwm_backlight.h>
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/platform_data/pca953x.h>
|
|
#include <linux/platform_data/i2c-pxa.h>
|
|
|
|
#include <linux/mfd/da903x.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/apm-emulation.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/spi_gpio.h>
|
|
#include <linux/spi/tdo24m.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/system_info.h>
|
|
|
|
#include "pxa300.h"
|
|
#include "pxa27x-udc.h"
|
|
#include <linux/platform_data/video-pxafb.h>
|
|
#include <linux/platform_data/mmc-pxamci.h>
|
|
#include <linux/platform_data/usb-ohci-pxa27x.h>
|
|
#include <linux/platform_data/mtd-nand-pxa3xx.h>
|
|
#include <mach/audio.h>
|
|
#include <linux/platform_data/usb-pxa3xx-ulpi.h>
|
|
|
|
#include <asm/mach/map.h>
|
|
|
|
#include "generic.h"
|
|
#include "devices.h"
|
|
|
|
#define CM_X300_ETH_PHYS 0x08000010
|
|
|
|
#define GPIO82_MMC_IRQ (82)
|
|
#define GPIO85_MMC_WP (85)
|
|
|
|
#define CM_X300_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ)
|
|
|
|
#define GPIO95_RTC_CS (95)
|
|
#define GPIO96_RTC_WR (96)
|
|
#define GPIO97_RTC_RD (97)
|
|
#define GPIO98_RTC_IO (98)
|
|
|
|
#define GPIO_ULPI_PHY_RST (127)
|
|
|
|
static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
|
|
/* LCD */
|
|
GPIO54_LCD_LDD_0,
|
|
GPIO55_LCD_LDD_1,
|
|
GPIO56_LCD_LDD_2,
|
|
GPIO57_LCD_LDD_3,
|
|
GPIO58_LCD_LDD_4,
|
|
GPIO59_LCD_LDD_5,
|
|
GPIO60_LCD_LDD_6,
|
|
GPIO61_LCD_LDD_7,
|
|
GPIO62_LCD_LDD_8,
|
|
GPIO63_LCD_LDD_9,
|
|
GPIO64_LCD_LDD_10,
|
|
GPIO65_LCD_LDD_11,
|
|
GPIO66_LCD_LDD_12,
|
|
GPIO67_LCD_LDD_13,
|
|
GPIO68_LCD_LDD_14,
|
|
GPIO69_LCD_LDD_15,
|
|
GPIO72_LCD_FCLK,
|
|
GPIO73_LCD_LCLK,
|
|
GPIO74_LCD_PCLK,
|
|
GPIO75_LCD_BIAS,
|
|
|
|
/* BTUART */
|
|
GPIO111_UART2_RTS,
|
|
GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
|
|
GPIO113_UART2_TXD,
|
|
GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
|
|
|
|
/* STUART */
|
|
GPIO109_UART3_TXD,
|
|
GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
|
|
|
|
/* AC97 */
|
|
GPIO23_AC97_nACRESET,
|
|
GPIO24_AC97_SYSCLK,
|
|
GPIO29_AC97_BITCLK,
|
|
GPIO25_AC97_SDATA_IN_0,
|
|
GPIO27_AC97_SDATA_OUT,
|
|
GPIO28_AC97_SYNC,
|
|
|
|
/* Keypad */
|
|
GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
|
|
GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
|
|
GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
|
|
GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
|
|
GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
|
|
GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
|
|
GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
|
|
GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
|
|
GPIO121_KP_MKOUT_0,
|
|
GPIO122_KP_MKOUT_1,
|
|
GPIO123_KP_MKOUT_2,
|
|
GPIO124_KP_MKOUT_3,
|
|
GPIO125_KP_MKOUT_4,
|
|
GPIO4_2_KP_MKOUT_5,
|
|
|
|
/* MMC1 */
|
|
GPIO3_MMC1_DAT0,
|
|
GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
|
|
GPIO5_MMC1_DAT2,
|
|
GPIO6_MMC1_DAT3,
|
|
GPIO7_MMC1_CLK,
|
|
GPIO8_MMC1_CMD, /* CMD0 for slot 0 */
|
|
|
|
/* MMC2 */
|
|
GPIO9_MMC2_DAT0,
|
|
GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
|
|
GPIO11_MMC2_DAT2,
|
|
GPIO12_MMC2_DAT3,
|
|
GPIO13_MMC2_CLK,
|
|
GPIO14_MMC2_CMD,
|
|
|
|
/* FFUART */
|
|
GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
|
|
GPIO31_UART1_TXD,
|
|
GPIO32_UART1_CTS,
|
|
GPIO37_UART1_RTS,
|
|
GPIO33_UART1_DCD,
|
|
GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
|
|
GPIO35_UART1_RI,
|
|
GPIO36_UART1_DTR,
|
|
|
|
/* GPIOs */
|
|
GPIO82_GPIO | MFP_PULL_HIGH, /* MMC CD */
|
|
GPIO85_GPIO, /* MMC WP */
|
|
GPIO99_GPIO, /* Ethernet IRQ */
|
|
|
|
/* RTC GPIOs */
|
|
GPIO95_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC CS */
|
|
GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC WR */
|
|
GPIO97_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC RD */
|
|
GPIO98_GPIO, /* RTC IO */
|
|
|
|
/* Standard I2C */
|
|
GPIO21_I2C_SCL,
|
|
GPIO22_I2C_SDA,
|
|
|
|
/* PWM Backlight */
|
|
GPIO19_PWM2_OUT,
|
|
};
|
|
|
|
static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
|
|
/* GPIOs */
|
|
GPIO79_GPIO, /* LED */
|
|
GPIO77_GPIO, /* WiFi reset */
|
|
GPIO78_GPIO, /* BT reset */
|
|
};
|
|
|
|
static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
|
|
/* GPIOs */
|
|
GPIO76_GPIO, /* LED */
|
|
GPIO71_GPIO, /* WiFi reset */
|
|
GPIO70_GPIO, /* BT reset */
|
|
};
|
|
|
|
static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
|
|
/* USB PORT 2 */
|
|
ULPI_STP,
|
|
ULPI_NXT,
|
|
ULPI_DIR,
|
|
GPIO30_ULPI_DATA_OUT_0,
|
|
GPIO31_ULPI_DATA_OUT_1,
|
|
GPIO32_ULPI_DATA_OUT_2,
|
|
GPIO33_ULPI_DATA_OUT_3,
|
|
GPIO34_ULPI_DATA_OUT_4,
|
|
GPIO35_ULPI_DATA_OUT_5,
|
|
GPIO36_ULPI_DATA_OUT_6,
|
|
GPIO37_ULPI_DATA_OUT_7,
|
|
GPIO38_ULPI_CLK,
|
|
/* external PHY reset pin */
|
|
GPIO127_GPIO,
|
|
|
|
/* USB PORT 3 */
|
|
GPIO77_USB_P3_1,
|
|
GPIO78_USB_P3_2,
|
|
GPIO79_USB_P3_3,
|
|
GPIO80_USB_P3_4,
|
|
GPIO81_USB_P3_5,
|
|
GPIO82_USB_P3_6,
|
|
GPIO0_2_USBH_PEN,
|
|
};
|
|
|
|
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
|
|
static struct resource dm9000_resources[] = {
|
|
[0] = {
|
|
.start = CM_X300_ETH_PHYS,
|
|
.end = CM_X300_ETH_PHYS + 0x3,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = CM_X300_ETH_PHYS + 0x4,
|
|
.end = CM_X300_ETH_PHYS + 0x4 + 500,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[2] = {
|
|
.start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
|
|
.end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
|
}
|
|
};
|
|
|
|
static struct dm9000_plat_data cm_x300_dm9000_platdata = {
|
|
.flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
|
|
};
|
|
|
|
static struct platform_device dm9000_device = {
|
|
.name = "dm9000",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(dm9000_resources),
|
|
.resource = dm9000_resources,
|
|
.dev = {
|
|
.platform_data = &cm_x300_dm9000_platdata,
|
|
}
|
|
|
|
};
|
|
|
|
static void __init cm_x300_init_dm9000(void)
|
|
{
|
|
platform_device_register(&dm9000_device);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_dm9000(void) {}
|
|
#endif
|
|
|
|
/* LCD */
|
|
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
|
|
static struct pxafb_mode_info cm_x300_lcd_modes[] = {
|
|
[0] = {
|
|
.pixclock = 38250,
|
|
.bpp = 16,
|
|
.xres = 480,
|
|
.yres = 640,
|
|
.hsync_len = 8,
|
|
.vsync_len = 2,
|
|
.left_margin = 8,
|
|
.upper_margin = 2,
|
|
.right_margin = 24,
|
|
.lower_margin = 4,
|
|
.cmap_greyscale = 0,
|
|
},
|
|
[1] = {
|
|
.pixclock = 153800,
|
|
.bpp = 16,
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.hsync_len = 8,
|
|
.vsync_len = 2,
|
|
.left_margin = 8,
|
|
.upper_margin = 2,
|
|
.right_margin = 88,
|
|
.lower_margin = 2,
|
|
.cmap_greyscale = 0,
|
|
},
|
|
};
|
|
|
|
static struct pxafb_mach_info cm_x300_lcd = {
|
|
.modes = cm_x300_lcd_modes,
|
|
.num_modes = ARRAY_SIZE(cm_x300_lcd_modes),
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
|
|
};
|
|
|
|
static void __init cm_x300_init_lcd(void)
|
|
{
|
|
pxa_set_fb_info(NULL, &cm_x300_lcd);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_lcd(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
|
|
static struct pwm_lookup cm_x300_pwm_lookup[] = {
|
|
PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 10000,
|
|
PWM_POLARITY_NORMAL),
|
|
};
|
|
|
|
static struct platform_pwm_backlight_data cm_x300_backlight_data = {
|
|
.max_brightness = 100,
|
|
.dft_brightness = 100,
|
|
.enable_gpio = -1,
|
|
};
|
|
|
|
static struct platform_device cm_x300_backlight_device = {
|
|
.name = "pwm-backlight",
|
|
.dev = {
|
|
.parent = &pxa27x_device_pwm0.dev,
|
|
.platform_data = &cm_x300_backlight_data,
|
|
},
|
|
};
|
|
|
|
static void cm_x300_init_bl(void)
|
|
{
|
|
pwm_add_table(cm_x300_pwm_lookup, ARRAY_SIZE(cm_x300_pwm_lookup));
|
|
platform_device_register(&cm_x300_backlight_device);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_bl(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE)
|
|
#define GPIO_LCD_BASE (144)
|
|
#define GPIO_LCD_DIN (GPIO_LCD_BASE + 8) /* aux_gpio3_0 */
|
|
#define GPIO_LCD_DOUT (GPIO_LCD_BASE + 9) /* aux_gpio3_1 */
|
|
#define GPIO_LCD_SCL (GPIO_LCD_BASE + 10) /* aux_gpio3_2 */
|
|
#define GPIO_LCD_CS (GPIO_LCD_BASE + 11) /* aux_gpio3_3 */
|
|
#define LCD_SPI_BUS_NUM (1)
|
|
|
|
static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = {
|
|
.num_chipselect = 1,
|
|
};
|
|
|
|
static struct platform_device cm_x300_spi_gpio = {
|
|
.name = "spi_gpio",
|
|
.id = LCD_SPI_BUS_NUM,
|
|
.dev = {
|
|
.platform_data = &cm_x300_spi_gpio_pdata,
|
|
},
|
|
};
|
|
|
|
static struct gpiod_lookup_table cm_x300_spi_gpiod_table = {
|
|
.dev_id = "spi_gpio",
|
|
.table = {
|
|
GPIO_LOOKUP("gpio-pxa", GPIO_LCD_SCL,
|
|
"sck", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DIN,
|
|
"mosi", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DOUT,
|
|
"miso", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("gpio-pxa", GPIO_LCD_CS,
|
|
"cs", GPIO_ACTIVE_HIGH),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static struct tdo24m_platform_data cm_x300_tdo24m_pdata = {
|
|
.model = TDO35S,
|
|
};
|
|
|
|
static struct spi_board_info cm_x300_spi_devices[] __initdata = {
|
|
{
|
|
.modalias = "tdo24m",
|
|
.max_speed_hz = 1000000,
|
|
.bus_num = LCD_SPI_BUS_NUM,
|
|
.chip_select = 0,
|
|
.platform_data = &cm_x300_tdo24m_pdata,
|
|
},
|
|
};
|
|
|
|
static void __init cm_x300_init_spi(void)
|
|
{
|
|
spi_register_board_info(cm_x300_spi_devices,
|
|
ARRAY_SIZE(cm_x300_spi_devices));
|
|
gpiod_add_lookup_table(&cm_x300_spi_gpiod_table);
|
|
platform_device_register(&cm_x300_spi_gpio);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_spi(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
|
|
static void __init cm_x300_init_ac97(void)
|
|
{
|
|
pxa_set_ac97_info(NULL);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_ac97(void) {}
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
|
|
static struct mtd_partition cm_x300_nand_partitions[] = {
|
|
[0] = {
|
|
.name = "OBM",
|
|
.offset = 0,
|
|
.size = SZ_256K,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
[1] = {
|
|
.name = "U-Boot",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_256K,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
[2] = {
|
|
.name = "Environment",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_256K,
|
|
},
|
|
[3] = {
|
|
.name = "reserved",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_256K + SZ_1M,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
[4] = {
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_4M,
|
|
},
|
|
[5] = {
|
|
.name = "fs",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
|
|
.keep_config = 1,
|
|
.parts = cm_x300_nand_partitions,
|
|
.nr_parts = ARRAY_SIZE(cm_x300_nand_partitions),
|
|
};
|
|
|
|
static void __init cm_x300_init_nand(void)
|
|
{
|
|
pxa3xx_set_nand_info(&cm_x300_nand_info);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_nand(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
|
|
static struct pxamci_platform_data cm_x300_mci_platform_data = {
|
|
.detect_delay_ms = 200,
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
};
|
|
|
|
static struct gpiod_lookup_table cm_x300_mci_gpio_table = {
|
|
.dev_id = "pxa2xx-mci.0",
|
|
.table = {
|
|
/* Card detect on GPIO 82 */
|
|
GPIO_LOOKUP("gpio-pxa", GPIO82_MMC_IRQ, "cd", GPIO_ACTIVE_LOW),
|
|
/* Write protect on GPIO 85 */
|
|
GPIO_LOOKUP("gpio-pxa", GPIO85_MMC_WP, "wp", GPIO_ACTIVE_LOW),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
|
|
no detection/ro pins */
|
|
static int cm_x300_mci2_init(struct device *dev,
|
|
irq_handler_t cm_x300_detect_int,
|
|
void *data)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void cm_x300_mci2_exit(struct device *dev, void *data)
|
|
{
|
|
}
|
|
|
|
static struct pxamci_platform_data cm_x300_mci2_platform_data = {
|
|
.detect_delay_ms = 200,
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
.init = cm_x300_mci2_init,
|
|
.exit = cm_x300_mci2_exit,
|
|
};
|
|
|
|
static void __init cm_x300_init_mmc(void)
|
|
{
|
|
gpiod_add_lookup_table(&cm_x300_mci_gpio_table);
|
|
pxa_set_mci_info(&cm_x300_mci_platform_data);
|
|
pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_mmc(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_PXA310_ULPI)
|
|
static struct clk *pout_clk;
|
|
|
|
static int cm_x300_ulpi_phy_reset(void)
|
|
{
|
|
int err;
|
|
|
|
/* reset the PHY */
|
|
err = gpio_request_one(GPIO_ULPI_PHY_RST, GPIOF_OUT_INIT_LOW,
|
|
"ulpi reset");
|
|
if (err) {
|
|
pr_err("failed to request ULPI reset GPIO: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
msleep(10);
|
|
gpio_set_value(GPIO_ULPI_PHY_RST, 1);
|
|
msleep(10);
|
|
|
|
gpio_free(GPIO_ULPI_PHY_RST);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cm_x300_u2d_init(struct device *dev)
|
|
{
|
|
int err = 0;
|
|
|
|
if (cpu_is_pxa310()) {
|
|
/* CLK_POUT is connected to the ULPI PHY */
|
|
pout_clk = clk_get(NULL, "CLK_POUT");
|
|
if (IS_ERR(pout_clk)) {
|
|
err = PTR_ERR(pout_clk);
|
|
pr_err("failed to get CLK_POUT: %d\n", err);
|
|
return err;
|
|
}
|
|
clk_prepare_enable(pout_clk);
|
|
|
|
err = cm_x300_ulpi_phy_reset();
|
|
if (err) {
|
|
clk_disable(pout_clk);
|
|
clk_put(pout_clk);
|
|
}
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static void cm_x300_u2d_exit(struct device *dev)
|
|
{
|
|
if (cpu_is_pxa310()) {
|
|
clk_disable_unprepare(pout_clk);
|
|
clk_put(pout_clk);
|
|
}
|
|
}
|
|
|
|
static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
|
|
.ulpi_mode = ULPI_SER_6PIN,
|
|
.init = cm_x300_u2d_init,
|
|
.exit = cm_x300_u2d_exit,
|
|
};
|
|
|
|
static void __init cm_x300_init_u2d(void)
|
|
{
|
|
pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_u2d(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
|
static int cm_x300_ohci_init(struct device *dev)
|
|
{
|
|
if (cpu_is_pxa300())
|
|
UP2OCR = UP2OCR_HXS
|
|
| UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
|
|
.port_mode = PMM_PERPORT_MODE,
|
|
.flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW,
|
|
.init = cm_x300_ohci_init,
|
|
};
|
|
|
|
static void __init cm_x300_init_ohci(void)
|
|
{
|
|
pxa_set_ohci_info(&cm_x300_ohci_platform_data);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_ohci(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
|
|
static struct gpio_led cm_x300_leds[] = {
|
|
[0] = {
|
|
.name = "cm-x300:green",
|
|
.default_trigger = "heartbeat",
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data cm_x300_gpio_led_pdata = {
|
|
.num_leds = ARRAY_SIZE(cm_x300_leds),
|
|
.leds = cm_x300_leds,
|
|
};
|
|
|
|
static struct platform_device cm_x300_led_device = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &cm_x300_gpio_led_pdata,
|
|
},
|
|
};
|
|
|
|
static void __init cm_x300_init_leds(void)
|
|
{
|
|
if (system_rev < 130)
|
|
cm_x300_leds[0].gpio = 79;
|
|
else
|
|
cm_x300_leds[0].gpio = 76;
|
|
|
|
platform_device_register(&cm_x300_led_device);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_leds(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
/* PCA9555 */
|
|
static struct pca953x_platform_data cm_x300_gpio_ext_pdata_0 = {
|
|
.gpio_base = 128,
|
|
};
|
|
|
|
static struct pca953x_platform_data cm_x300_gpio_ext_pdata_1 = {
|
|
.gpio_base = 144,
|
|
};
|
|
|
|
static struct i2c_board_info cm_x300_gpio_ext_info[] = {
|
|
[0] = {
|
|
I2C_BOARD_INFO("pca9555", 0x24),
|
|
.platform_data = &cm_x300_gpio_ext_pdata_0,
|
|
},
|
|
[1] = {
|
|
I2C_BOARD_INFO("pca9555", 0x25),
|
|
.platform_data = &cm_x300_gpio_ext_pdata_1,
|
|
},
|
|
};
|
|
|
|
static void __init cm_x300_init_i2c(void)
|
|
{
|
|
pxa_set_i2c_info(NULL);
|
|
i2c_register_board_info(0, cm_x300_gpio_ext_info,
|
|
ARRAY_SIZE(cm_x300_gpio_ext_info));
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_i2c(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
|
|
struct v3020_platform_data cm_x300_v3020_pdata = {
|
|
.use_gpio = 1,
|
|
.gpio_cs = GPIO95_RTC_CS,
|
|
.gpio_wr = GPIO96_RTC_WR,
|
|
.gpio_rd = GPIO97_RTC_RD,
|
|
.gpio_io = GPIO98_RTC_IO,
|
|
};
|
|
|
|
static struct platform_device cm_x300_rtc_device = {
|
|
.name = "v3020",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &cm_x300_v3020_pdata,
|
|
}
|
|
};
|
|
|
|
static void __init cm_x300_init_rtc(void)
|
|
{
|
|
platform_device_register(&cm_x300_rtc_device);
|
|
}
|
|
#else
|
|
static inline void cm_x300_init_rtc(void) {}
|
|
#endif
|
|
|
|
/* Battery */
|
|
struct power_supply_info cm_x300_psy_info = {
|
|
.name = "battery",
|
|
.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
|
|
.voltage_max_design = 4200000,
|
|
.voltage_min_design = 3000000,
|
|
.use_for_apm = 1,
|
|
};
|
|
|
|
static void cm_x300_battery_low(void)
|
|
{
|
|
#if defined(CONFIG_APM_EMULATION)
|
|
apm_queue_event(APM_LOW_BATTERY);
|
|
#endif
|
|
}
|
|
|
|
static void cm_x300_battery_critical(void)
|
|
{
|
|
#if defined(CONFIG_APM_EMULATION)
|
|
apm_queue_event(APM_CRITICAL_SUSPEND);
|
|
#endif
|
|
}
|
|
|
|
struct da9030_battery_info cm_x300_battery_info = {
|
|
.battery_info = &cm_x300_psy_info,
|
|
|
|
.charge_milliamp = 1000,
|
|
.charge_millivolt = 4200,
|
|
|
|
.vbat_low = 3600,
|
|
.vbat_crit = 3400,
|
|
.vbat_charge_start = 4100,
|
|
.vbat_charge_stop = 4200,
|
|
.vbat_charge_restart = 4000,
|
|
|
|
.vcharge_min = 3200,
|
|
.vcharge_max = 5500,
|
|
|
|
.tbat_low = 197,
|
|
.tbat_high = 78,
|
|
.tbat_restart = 100,
|
|
|
|
.batmon_interval = 0,
|
|
|
|
.battery_low = cm_x300_battery_low,
|
|
.battery_critical = cm_x300_battery_critical,
|
|
};
|
|
|
|
static struct regulator_consumer_supply buck2_consumers[] = {
|
|
REGULATOR_SUPPLY("vcc_core", NULL),
|
|
};
|
|
|
|
static struct regulator_init_data buck2_data = {
|
|
.constraints = {
|
|
.min_uV = 1375000,
|
|
.max_uV = 1375000,
|
|
.state_mem = {
|
|
.enabled = 0,
|
|
},
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
|
|
.apply_uV = 1,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(buck2_consumers),
|
|
.consumer_supplies = buck2_consumers,
|
|
};
|
|
|
|
/* DA9030 */
|
|
struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
|
|
{
|
|
.name = "da903x-battery",
|
|
.id = DA9030_ID_BAT,
|
|
.platform_data = &cm_x300_battery_info,
|
|
},
|
|
{
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_BUCK2,
|
|
.platform_data = &buck2_data,
|
|
},
|
|
};
|
|
|
|
static struct da903x_platform_data cm_x300_da9030_info = {
|
|
.num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs),
|
|
.subdevs = cm_x300_da9030_subdevs,
|
|
};
|
|
|
|
static struct i2c_board_info cm_x300_pmic_info = {
|
|
I2C_BOARD_INFO("da9030", 0x49),
|
|
.irq = IRQ_WAKEUP0,
|
|
.platform_data = &cm_x300_da9030_info,
|
|
};
|
|
|
|
static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = {
|
|
.use_pio = 1,
|
|
};
|
|
|
|
static void __init cm_x300_init_da9030(void)
|
|
{
|
|
pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
|
|
i2c_register_board_info(1, &cm_x300_pmic_info, 1);
|
|
irq_set_irq_wake(IRQ_WAKEUP0, 1);
|
|
}
|
|
|
|
/* wi2wi gpio setting for system_rev >= 130 */
|
|
static struct gpio cm_x300_wi2wi_gpios[] __initdata = {
|
|
{ 71, GPIOF_OUT_INIT_HIGH, "wlan en" },
|
|
{ 70, GPIOF_OUT_INIT_HIGH, "bt reset" },
|
|
};
|
|
|
|
static void __init cm_x300_init_wi2wi(void)
|
|
{
|
|
int err;
|
|
|
|
if (system_rev < 130) {
|
|
cm_x300_wi2wi_gpios[0].gpio = 77; /* wlan en */
|
|
cm_x300_wi2wi_gpios[1].gpio = 78; /* bt reset */
|
|
}
|
|
|
|
/* Libertas and CSR reset */
|
|
err = gpio_request_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
|
|
if (err) {
|
|
pr_err("failed to request wifi/bt gpios: %d\n", err);
|
|
return;
|
|
}
|
|
|
|
udelay(10);
|
|
gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 0);
|
|
udelay(10);
|
|
gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 1);
|
|
|
|
gpio_free_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
|
|
}
|
|
|
|
/* MFP */
|
|
static void __init cm_x300_init_mfp(void)
|
|
{
|
|
/* board-processor specific GPIO initialization */
|
|
pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
|
|
|
|
if (system_rev < 130)
|
|
pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
|
|
else
|
|
pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
|
|
|
|
if (cpu_is_pxa310())
|
|
pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
|
|
}
|
|
|
|
static void __init cm_x300_init(void)
|
|
{
|
|
cm_x300_init_mfp();
|
|
|
|
pxa_set_btuart_info(NULL);
|
|
pxa_set_stuart_info(NULL);
|
|
if (cpu_is_pxa300())
|
|
pxa_set_ffuart_info(NULL);
|
|
|
|
cm_x300_init_da9030();
|
|
cm_x300_init_dm9000();
|
|
cm_x300_init_lcd();
|
|
cm_x300_init_u2d();
|
|
cm_x300_init_ohci();
|
|
cm_x300_init_mmc();
|
|
cm_x300_init_nand();
|
|
cm_x300_init_leds();
|
|
cm_x300_init_i2c();
|
|
cm_x300_init_spi();
|
|
cm_x300_init_rtc();
|
|
cm_x300_init_ac97();
|
|
cm_x300_init_wi2wi();
|
|
cm_x300_init_bl();
|
|
|
|
regulator_has_full_constraints();
|
|
}
|
|
|
|
static void __init cm_x300_fixup(struct tag *tags, char **cmdline)
|
|
{
|
|
/* Make sure that mi->bank[0].start = PHYS_ADDR */
|
|
for (; tags->hdr.size; tags = tag_next(tags))
|
|
if (tags->hdr.tag == ATAG_MEM &&
|
|
tags->u.mem.start == 0x80000000) {
|
|
tags->u.mem.start = 0xa0000000;
|
|
break;
|
|
}
|
|
}
|
|
|
|
MACHINE_START(CM_X300, "CM-X300 module")
|
|
.atag_offset = 0x100,
|
|
.map_io = pxa3xx_map_io,
|
|
.nr_irqs = PXA_NR_IRQS,
|
|
.init_irq = pxa3xx_init_irq,
|
|
.handle_irq = pxa3xx_handle_irq,
|
|
.init_time = pxa_timer_init,
|
|
.init_machine = cm_x300_init,
|
|
.fixup = cm_x300_fixup,
|
|
.restart = pxa_restart,
|
|
MACHINE_END
|