mirror of https://gitee.com/openkylin/linux.git
295 lines
8.4 KiB
C
295 lines
8.4 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/* sc520cdp.c -- MTD map driver for AMD SC520 Customer Development Platform
|
|
*
|
|
* Copyright (C) 2001 Sysgo Real-Time Solutions GmbH
|
|
*
|
|
* The SC520CDP is an evaluation board for the Elan SC520 processor available
|
|
* from AMD. It has two banks of 32-bit Flash ROM, each 8 Megabytes in size,
|
|
* and up to 512 KiB of 8-bit DIL Flash ROM.
|
|
* For details see http://www.amd.com/products/epd/desiging/evalboards/18.elansc520/520_cdp_brief/index.html
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <asm/io.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/map.h>
|
|
#include <linux/mtd/concat.h>
|
|
|
|
/*
|
|
** The Embedded Systems BIOS decodes the first FLASH starting at
|
|
** 0x8400000. This is a *terrible* place for it because accessing
|
|
** the flash at this location causes the A22 address line to be high
|
|
** (that's what 0x8400000 binary's ought to be). But this is the highest
|
|
** order address line on the raw flash devices themselves!!
|
|
** This causes the top HALF of the flash to be accessed first. Beyond
|
|
** the physical limits of the flash, the flash chip aliases over (to
|
|
** 0x880000 which causes the bottom half to be accessed. This splits the
|
|
** flash into two and inverts it! If you then try to access this from another
|
|
** program that does NOT do this insanity, then you *will* access the
|
|
** first half of the flash, but not find what you expect there. That
|
|
** stuff is in the *second* half! Similarly, the address used by the
|
|
** BIOS for the second FLASH bank is also quite a bad choice.
|
|
** If REPROGRAM_PAR is defined below (the default), then this driver will
|
|
** choose more useful addresses for the FLASH banks by reprogramming the
|
|
** responsible PARxx registers in the SC520's MMCR region. This will
|
|
** cause the settings to be incompatible with the BIOS's settings, which
|
|
** shouldn't be a problem since you are running Linux, (i.e. the BIOS is
|
|
** not much use anyway). However, if you need to be compatible with
|
|
** the BIOS for some reason, just undefine REPROGRAM_PAR.
|
|
*/
|
|
#define REPROGRAM_PAR
|
|
|
|
|
|
|
|
#ifdef REPROGRAM_PAR
|
|
|
|
/* These are the addresses we want.. */
|
|
#define WINDOW_ADDR_0 0x08800000
|
|
#define WINDOW_ADDR_1 0x09000000
|
|
#define WINDOW_ADDR_2 0x09800000
|
|
|
|
/* .. and these are the addresses the BIOS gives us */
|
|
#define WINDOW_ADDR_0_BIOS 0x08400000
|
|
#define WINDOW_ADDR_1_BIOS 0x08c00000
|
|
#define WINDOW_ADDR_2_BIOS 0x09400000
|
|
|
|
#else
|
|
|
|
#define WINDOW_ADDR_0 0x08400000
|
|
#define WINDOW_ADDR_1 0x08C00000
|
|
#define WINDOW_ADDR_2 0x09400000
|
|
|
|
#endif
|
|
|
|
#define WINDOW_SIZE_0 0x00800000
|
|
#define WINDOW_SIZE_1 0x00800000
|
|
#define WINDOW_SIZE_2 0x00080000
|
|
|
|
|
|
static struct map_info sc520cdp_map[] = {
|
|
{
|
|
.name = "SC520CDP Flash Bank #0",
|
|
.size = WINDOW_SIZE_0,
|
|
.bankwidth = 4,
|
|
.phys = WINDOW_ADDR_0
|
|
},
|
|
{
|
|
.name = "SC520CDP Flash Bank #1",
|
|
.size = WINDOW_SIZE_1,
|
|
.bankwidth = 4,
|
|
.phys = WINDOW_ADDR_1
|
|
},
|
|
{
|
|
.name = "SC520CDP DIL Flash",
|
|
.size = WINDOW_SIZE_2,
|
|
.bankwidth = 1,
|
|
.phys = WINDOW_ADDR_2
|
|
},
|
|
};
|
|
|
|
#define NUM_FLASH_BANKS ARRAY_SIZE(sc520cdp_map)
|
|
|
|
static struct mtd_info *mymtd[NUM_FLASH_BANKS];
|
|
static struct mtd_info *merged_mtd;
|
|
|
|
#ifdef REPROGRAM_PAR
|
|
|
|
/*
|
|
** The SC520 MMCR (memory mapped control register) region resides
|
|
** at 0xFFFEF000. The 16 Programmable Address Region (PAR) registers
|
|
** are at offset 0x88 in the MMCR:
|
|
*/
|
|
#define SC520_MMCR_BASE 0xFFFEF000
|
|
#define SC520_MMCR_EXTENT 0x1000
|
|
#define SC520_PAR(x) ((0x88/sizeof(unsigned long)) + (x))
|
|
#define NUM_SC520_PAR 16 /* total number of PAR registers */
|
|
|
|
/*
|
|
** The highest three bits in a PAR register determine what target
|
|
** device is controlled by this PAR. Here, only ROMCS? and BOOTCS
|
|
** devices are of interest.
|
|
*/
|
|
#define SC520_PAR_BOOTCS (0x4<<29)
|
|
#define SC520_PAR_ROMCS0 (0x5<<29)
|
|
#define SC520_PAR_ROMCS1 (0x6<<29)
|
|
#define SC520_PAR_TRGDEV (0x7<<29)
|
|
|
|
/*
|
|
** Bits 28 thru 26 determine some attributes for the
|
|
** region controlled by the PAR. (We only use non-cacheable)
|
|
*/
|
|
#define SC520_PAR_WRPROT (1<<26) /* write protected */
|
|
#define SC520_PAR_NOCACHE (1<<27) /* non-cacheable */
|
|
#define SC520_PAR_NOEXEC (1<<28) /* code execution denied */
|
|
|
|
|
|
/*
|
|
** Bit 25 determines the granularity: 4K or 64K
|
|
*/
|
|
#define SC520_PAR_PG_SIZ4 (0<<25)
|
|
#define SC520_PAR_PG_SIZ64 (1<<25)
|
|
|
|
/*
|
|
** Build a value to be written into a PAR register.
|
|
** We only need ROM entries, 64K page size:
|
|
*/
|
|
#define SC520_PAR_ENTRY(trgdev, address, size) \
|
|
((trgdev) | SC520_PAR_NOCACHE | SC520_PAR_PG_SIZ64 | \
|
|
(address) >> 16 | (((size) >> 16) - 1) << 14)
|
|
|
|
struct sc520_par_table
|
|
{
|
|
unsigned long trgdev;
|
|
unsigned long new_par;
|
|
unsigned long default_address;
|
|
};
|
|
|
|
static const struct sc520_par_table par_table[NUM_FLASH_BANKS] =
|
|
{
|
|
{ /* Flash Bank #0: selected by ROMCS0 */
|
|
SC520_PAR_ROMCS0,
|
|
SC520_PAR_ENTRY(SC520_PAR_ROMCS0, WINDOW_ADDR_0, WINDOW_SIZE_0),
|
|
WINDOW_ADDR_0_BIOS
|
|
},
|
|
{ /* Flash Bank #1: selected by ROMCS1 */
|
|
SC520_PAR_ROMCS1,
|
|
SC520_PAR_ENTRY(SC520_PAR_ROMCS1, WINDOW_ADDR_1, WINDOW_SIZE_1),
|
|
WINDOW_ADDR_1_BIOS
|
|
},
|
|
{ /* DIL (BIOS) Flash: selected by BOOTCS */
|
|
SC520_PAR_BOOTCS,
|
|
SC520_PAR_ENTRY(SC520_PAR_BOOTCS, WINDOW_ADDR_2, WINDOW_SIZE_2),
|
|
WINDOW_ADDR_2_BIOS
|
|
}
|
|
};
|
|
|
|
|
|
static void sc520cdp_setup_par(void)
|
|
{
|
|
unsigned long __iomem *mmcr;
|
|
unsigned long mmcr_val;
|
|
int i, j;
|
|
|
|
/* map in SC520's MMCR area */
|
|
mmcr = ioremap_nocache(SC520_MMCR_BASE, SC520_MMCR_EXTENT);
|
|
if(!mmcr) { /* ioremap_nocache failed: skip the PAR reprogramming */
|
|
/* force physical address fields to BIOS defaults: */
|
|
for(i = 0; i < NUM_FLASH_BANKS; i++)
|
|
sc520cdp_map[i].phys = par_table[i].default_address;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Find the PARxx registers that are responsible for activating
|
|
** ROMCS0, ROMCS1 and BOOTCS. Reprogram each of these with a
|
|
** new value from the table.
|
|
*/
|
|
for(i = 0; i < NUM_FLASH_BANKS; i++) { /* for each par_table entry */
|
|
for(j = 0; j < NUM_SC520_PAR; j++) { /* for each PAR register */
|
|
mmcr_val = readl(&mmcr[SC520_PAR(j)]);
|
|
/* if target device field matches, reprogram the PAR */
|
|
if((mmcr_val & SC520_PAR_TRGDEV) == par_table[i].trgdev)
|
|
{
|
|
writel(par_table[i].new_par, &mmcr[SC520_PAR(j)]);
|
|
break;
|
|
}
|
|
}
|
|
if(j == NUM_SC520_PAR)
|
|
{ /* no matching PAR found: try default BIOS address */
|
|
printk(KERN_NOTICE "Could not find PAR responsible for %s\n",
|
|
sc520cdp_map[i].name);
|
|
printk(KERN_NOTICE "Trying default address 0x%lx\n",
|
|
par_table[i].default_address);
|
|
sc520cdp_map[i].phys = par_table[i].default_address;
|
|
}
|
|
}
|
|
iounmap(mmcr);
|
|
}
|
|
#endif
|
|
|
|
|
|
static int __init init_sc520cdp(void)
|
|
{
|
|
int i, j, devices_found = 0;
|
|
|
|
#ifdef REPROGRAM_PAR
|
|
/* reprogram PAR registers so flash appears at the desired addresses */
|
|
sc520cdp_setup_par();
|
|
#endif
|
|
|
|
for (i = 0; i < NUM_FLASH_BANKS; i++) {
|
|
printk(KERN_NOTICE "SC520 CDP flash device: 0x%Lx at 0x%Lx\n",
|
|
(unsigned long long)sc520cdp_map[i].size,
|
|
(unsigned long long)sc520cdp_map[i].phys);
|
|
|
|
sc520cdp_map[i].virt = ioremap_nocache(sc520cdp_map[i].phys, sc520cdp_map[i].size);
|
|
|
|
if (!sc520cdp_map[i].virt) {
|
|
printk("Failed to ioremap_nocache\n");
|
|
for (j = 0; j < i; j++) {
|
|
if (mymtd[j]) {
|
|
map_destroy(mymtd[j]);
|
|
iounmap(sc520cdp_map[j].virt);
|
|
}
|
|
}
|
|
return -EIO;
|
|
}
|
|
|
|
simple_map_init(&sc520cdp_map[i]);
|
|
|
|
mymtd[i] = do_map_probe("cfi_probe", &sc520cdp_map[i]);
|
|
if(!mymtd[i])
|
|
mymtd[i] = do_map_probe("jedec_probe", &sc520cdp_map[i]);
|
|
if(!mymtd[i])
|
|
mymtd[i] = do_map_probe("map_rom", &sc520cdp_map[i]);
|
|
|
|
if (mymtd[i]) {
|
|
mymtd[i]->owner = THIS_MODULE;
|
|
++devices_found;
|
|
}
|
|
else {
|
|
iounmap(sc520cdp_map[i].virt);
|
|
}
|
|
}
|
|
if(devices_found >= 2) {
|
|
/* Combine the two flash banks into a single MTD device & register it: */
|
|
merged_mtd = mtd_concat_create(mymtd, 2, "SC520CDP Flash Banks #0 and #1");
|
|
if(merged_mtd)
|
|
mtd_device_register(merged_mtd, NULL, 0);
|
|
}
|
|
if(devices_found == 3) /* register the third (DIL-Flash) device */
|
|
mtd_device_register(mymtd[2], NULL, 0);
|
|
return(devices_found ? 0 : -ENXIO);
|
|
}
|
|
|
|
static void __exit cleanup_sc520cdp(void)
|
|
{
|
|
int i;
|
|
|
|
if (merged_mtd) {
|
|
mtd_device_unregister(merged_mtd);
|
|
mtd_concat_destroy(merged_mtd);
|
|
}
|
|
if (mymtd[2])
|
|
mtd_device_unregister(mymtd[2]);
|
|
|
|
for (i = 0; i < NUM_FLASH_BANKS; i++) {
|
|
if (mymtd[i])
|
|
map_destroy(mymtd[i]);
|
|
if (sc520cdp_map[i].virt) {
|
|
iounmap(sc520cdp_map[i].virt);
|
|
sc520cdp_map[i].virt = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
module_init(init_sc520cdp);
|
|
module_exit(cleanup_sc520cdp);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Sysgo Real-Time Solutions GmbH");
|
|
MODULE_DESCRIPTION("MTD map driver for AMD SC520 Customer Development Platform");
|