mirror of https://gitee.com/openkylin/linux.git
431 lines
11 KiB
C
431 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
|
|
*
|
|
* Derived from drivers/mtd/nand/toto.c (removed in v2.6.28)
|
|
* Copyright (c) 2003 Texas Instruments
|
|
* Copyright (c) 2002 Thomas Gleixner <tgxl@linutronix.de>
|
|
*
|
|
* Converted to platform driver by Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
|
|
* Partially stolen from plat_nand.c
|
|
*
|
|
* Overview:
|
|
* This is a device driver for the NAND flash device found on the
|
|
* Amstrad E3 (Delta).
|
|
*/
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand-gpio.h>
|
|
#include <linux/mtd/rawnand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/sizes.h>
|
|
|
|
/*
|
|
* MTD structure for E3 (Delta)
|
|
*/
|
|
struct gpio_nand {
|
|
struct nand_controller base;
|
|
struct nand_chip nand_chip;
|
|
struct gpio_desc *gpiod_rdy;
|
|
struct gpio_desc *gpiod_nce;
|
|
struct gpio_desc *gpiod_nre;
|
|
struct gpio_desc *gpiod_nwp;
|
|
struct gpio_desc *gpiod_nwe;
|
|
struct gpio_desc *gpiod_ale;
|
|
struct gpio_desc *gpiod_cle;
|
|
struct gpio_descs *data_gpiods;
|
|
bool data_in;
|
|
unsigned int tRP;
|
|
unsigned int tWP;
|
|
u8 (*io_read)(struct gpio_nand *this);
|
|
void (*io_write)(struct gpio_nand *this, u8 byte);
|
|
};
|
|
|
|
static void gpio_nand_write_commit(struct gpio_nand *priv)
|
|
{
|
|
gpiod_set_value(priv->gpiod_nwe, 1);
|
|
ndelay(priv->tWP);
|
|
gpiod_set_value(priv->gpiod_nwe, 0);
|
|
}
|
|
|
|
static void gpio_nand_io_write(struct gpio_nand *priv, u8 byte)
|
|
{
|
|
struct gpio_descs *data_gpiods = priv->data_gpiods;
|
|
DECLARE_BITMAP(values, BITS_PER_TYPE(byte)) = { byte, };
|
|
|
|
gpiod_set_raw_array_value(data_gpiods->ndescs, data_gpiods->desc,
|
|
data_gpiods->info, values);
|
|
|
|
gpio_nand_write_commit(priv);
|
|
}
|
|
|
|
static void gpio_nand_dir_output(struct gpio_nand *priv, u8 byte)
|
|
{
|
|
struct gpio_descs *data_gpiods = priv->data_gpiods;
|
|
DECLARE_BITMAP(values, BITS_PER_TYPE(byte)) = { byte, };
|
|
int i;
|
|
|
|
for (i = 0; i < data_gpiods->ndescs; i++)
|
|
gpiod_direction_output_raw(data_gpiods->desc[i],
|
|
test_bit(i, values));
|
|
|
|
gpio_nand_write_commit(priv);
|
|
|
|
priv->data_in = false;
|
|
}
|
|
|
|
static u8 gpio_nand_io_read(struct gpio_nand *priv)
|
|
{
|
|
u8 res;
|
|
struct gpio_descs *data_gpiods = priv->data_gpiods;
|
|
DECLARE_BITMAP(values, BITS_PER_TYPE(res)) = { 0, };
|
|
|
|
gpiod_set_value(priv->gpiod_nre, 1);
|
|
ndelay(priv->tRP);
|
|
|
|
gpiod_get_raw_array_value(data_gpiods->ndescs, data_gpiods->desc,
|
|
data_gpiods->info, values);
|
|
|
|
gpiod_set_value(priv->gpiod_nre, 0);
|
|
|
|
res = values[0];
|
|
return res;
|
|
}
|
|
|
|
static void gpio_nand_dir_input(struct gpio_nand *priv)
|
|
{
|
|
struct gpio_descs *data_gpiods = priv->data_gpiods;
|
|
int i;
|
|
|
|
for (i = 0; i < data_gpiods->ndescs; i++)
|
|
gpiod_direction_input(data_gpiods->desc[i]);
|
|
|
|
priv->data_in = true;
|
|
}
|
|
|
|
static void gpio_nand_write_buf(struct gpio_nand *priv, const u8 *buf, int len)
|
|
{
|
|
int i = 0;
|
|
|
|
if (len > 0 && priv->data_in)
|
|
gpio_nand_dir_output(priv, buf[i++]);
|
|
|
|
while (i < len)
|
|
priv->io_write(priv, buf[i++]);
|
|
}
|
|
|
|
static void gpio_nand_read_buf(struct gpio_nand *priv, u8 *buf, int len)
|
|
{
|
|
int i;
|
|
|
|
if (priv->data_gpiods && !priv->data_in)
|
|
gpio_nand_dir_input(priv);
|
|
|
|
for (i = 0; i < len; i++)
|
|
buf[i] = priv->io_read(priv);
|
|
}
|
|
|
|
static void gpio_nand_ctrl_cs(struct gpio_nand *priv, bool assert)
|
|
{
|
|
gpiod_set_value(priv->gpiod_nce, assert);
|
|
}
|
|
|
|
static int gpio_nand_exec_op(struct nand_chip *this,
|
|
const struct nand_operation *op, bool check_only)
|
|
{
|
|
struct gpio_nand *priv = nand_get_controller_data(this);
|
|
const struct nand_op_instr *instr;
|
|
int ret = 0;
|
|
|
|
if (check_only)
|
|
return 0;
|
|
|
|
gpio_nand_ctrl_cs(priv, 1);
|
|
|
|
for (instr = op->instrs; instr < op->instrs + op->ninstrs; instr++) {
|
|
switch (instr->type) {
|
|
case NAND_OP_CMD_INSTR:
|
|
gpiod_set_value(priv->gpiod_cle, 1);
|
|
gpio_nand_write_buf(priv, &instr->ctx.cmd.opcode, 1);
|
|
gpiod_set_value(priv->gpiod_cle, 0);
|
|
break;
|
|
|
|
case NAND_OP_ADDR_INSTR:
|
|
gpiod_set_value(priv->gpiod_ale, 1);
|
|
gpio_nand_write_buf(priv, instr->ctx.addr.addrs,
|
|
instr->ctx.addr.naddrs);
|
|
gpiod_set_value(priv->gpiod_ale, 0);
|
|
break;
|
|
|
|
case NAND_OP_DATA_IN_INSTR:
|
|
gpio_nand_read_buf(priv, instr->ctx.data.buf.in,
|
|
instr->ctx.data.len);
|
|
break;
|
|
|
|
case NAND_OP_DATA_OUT_INSTR:
|
|
gpio_nand_write_buf(priv, instr->ctx.data.buf.out,
|
|
instr->ctx.data.len);
|
|
break;
|
|
|
|
case NAND_OP_WAITRDY_INSTR:
|
|
ret = priv->gpiod_rdy ?
|
|
nand_gpio_waitrdy(this, priv->gpiod_rdy,
|
|
instr->ctx.waitrdy.timeout_ms) :
|
|
nand_soft_waitrdy(this,
|
|
instr->ctx.waitrdy.timeout_ms);
|
|
break;
|
|
}
|
|
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
gpio_nand_ctrl_cs(priv, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int gpio_nand_setup_data_interface(struct nand_chip *this, int csline,
|
|
const struct nand_data_interface *cf)
|
|
{
|
|
struct gpio_nand *priv = nand_get_controller_data(this);
|
|
const struct nand_sdr_timings *sdr = nand_get_sdr_timings(cf);
|
|
struct device *dev = &nand_to_mtd(this)->dev;
|
|
|
|
if (IS_ERR(sdr))
|
|
return PTR_ERR(sdr);
|
|
|
|
if (csline == NAND_DATA_IFACE_CHECK_ONLY)
|
|
return 0;
|
|
|
|
if (priv->gpiod_nre) {
|
|
priv->tRP = DIV_ROUND_UP(sdr->tRP_min, 1000);
|
|
dev_dbg(dev, "using %u ns read pulse width\n", priv->tRP);
|
|
}
|
|
|
|
priv->tWP = DIV_ROUND_UP(sdr->tWP_min, 1000);
|
|
dev_dbg(dev, "using %u ns write pulse width\n", priv->tWP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct nand_controller_ops gpio_nand_ops = {
|
|
.exec_op = gpio_nand_exec_op,
|
|
.setup_data_interface = gpio_nand_setup_data_interface,
|
|
};
|
|
|
|
/*
|
|
* Main initialization routine
|
|
*/
|
|
static int gpio_nand_probe(struct platform_device *pdev)
|
|
{
|
|
struct gpio_nand_platdata *pdata = dev_get_platdata(&pdev->dev);
|
|
const struct mtd_partition *partitions = NULL;
|
|
int num_partitions = 0;
|
|
struct gpio_nand *priv;
|
|
struct nand_chip *this;
|
|
struct mtd_info *mtd;
|
|
int (*probe)(struct platform_device *pdev, struct gpio_nand *priv);
|
|
int err = 0;
|
|
|
|
if (pdata) {
|
|
partitions = pdata->parts;
|
|
num_partitions = pdata->num_parts;
|
|
}
|
|
|
|
/* Allocate memory for MTD device structure and private data */
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(struct gpio_nand),
|
|
GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
this = &priv->nand_chip;
|
|
|
|
mtd = nand_to_mtd(this);
|
|
mtd->dev.parent = &pdev->dev;
|
|
|
|
nand_set_controller_data(this, priv);
|
|
nand_set_flash_node(this, pdev->dev.of_node);
|
|
|
|
priv->gpiod_rdy = devm_gpiod_get_optional(&pdev->dev, "rdy", GPIOD_IN);
|
|
if (IS_ERR(priv->gpiod_rdy)) {
|
|
err = PTR_ERR(priv->gpiod_rdy);
|
|
dev_warn(&pdev->dev, "RDY GPIO request failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
this->ecc.mode = NAND_ECC_SOFT;
|
|
this->ecc.algo = NAND_ECC_HAMMING;
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
/* Set chip enabled but write protected */
|
|
priv->gpiod_nwp = devm_gpiod_get_optional(&pdev->dev, "nwp",
|
|
GPIOD_OUT_HIGH);
|
|
if (IS_ERR(priv->gpiod_nwp)) {
|
|
err = PTR_ERR(priv->gpiod_nwp);
|
|
dev_err(&pdev->dev, "NWP GPIO request failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
priv->gpiod_nce = devm_gpiod_get_optional(&pdev->dev, "nce",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(priv->gpiod_nce)) {
|
|
err = PTR_ERR(priv->gpiod_nce);
|
|
dev_err(&pdev->dev, "NCE GPIO request failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
priv->gpiod_nre = devm_gpiod_get_optional(&pdev->dev, "nre",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(priv->gpiod_nre)) {
|
|
err = PTR_ERR(priv->gpiod_nre);
|
|
dev_err(&pdev->dev, "NRE GPIO request failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
priv->gpiod_nwe = devm_gpiod_get_optional(&pdev->dev, "nwe",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(priv->gpiod_nwe)) {
|
|
err = PTR_ERR(priv->gpiod_nwe);
|
|
dev_err(&pdev->dev, "NWE GPIO request failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
priv->gpiod_ale = devm_gpiod_get(&pdev->dev, "ale", GPIOD_OUT_LOW);
|
|
if (IS_ERR(priv->gpiod_ale)) {
|
|
err = PTR_ERR(priv->gpiod_ale);
|
|
dev_err(&pdev->dev, "ALE GPIO request failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
priv->gpiod_cle = devm_gpiod_get(&pdev->dev, "cle", GPIOD_OUT_LOW);
|
|
if (IS_ERR(priv->gpiod_cle)) {
|
|
err = PTR_ERR(priv->gpiod_cle);
|
|
dev_err(&pdev->dev, "CLE GPIO request failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
/* Request array of data pins, initialize them as input */
|
|
priv->data_gpiods = devm_gpiod_get_array_optional(&pdev->dev, "data",
|
|
GPIOD_IN);
|
|
if (IS_ERR(priv->data_gpiods)) {
|
|
err = PTR_ERR(priv->data_gpiods);
|
|
dev_err(&pdev->dev, "data GPIO request failed: %d\n", err);
|
|
return err;
|
|
}
|
|
if (priv->data_gpiods) {
|
|
if (!priv->gpiod_nwe) {
|
|
dev_err(&pdev->dev,
|
|
"mandatory NWE pin not provided by platform\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
priv->io_read = gpio_nand_io_read;
|
|
priv->io_write = gpio_nand_io_write;
|
|
priv->data_in = true;
|
|
}
|
|
|
|
if (pdev->id_entry)
|
|
probe = (void *) pdev->id_entry->driver_data;
|
|
else
|
|
probe = of_device_get_match_data(&pdev->dev);
|
|
if (probe)
|
|
err = probe(pdev, priv);
|
|
if (err)
|
|
return err;
|
|
|
|
if (!priv->io_read || !priv->io_write) {
|
|
dev_err(&pdev->dev, "incomplete device configuration\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Initialize the NAND controller object embedded in gpio_nand. */
|
|
priv->base.ops = &gpio_nand_ops;
|
|
nand_controller_init(&priv->base);
|
|
this->controller = &priv->base;
|
|
|
|
/*
|
|
* FIXME: We should release write protection only after nand_scan() to
|
|
* be on the safe side but we can't do that until we have a generic way
|
|
* to assert/deassert WP from the core. Even if the core shouldn't
|
|
* write things in the nand_scan() path, it should have control on this
|
|
* pin just in case we ever need to disable write protection during
|
|
* chip detection/initialization.
|
|
*/
|
|
/* Release write protection */
|
|
gpiod_set_value(priv->gpiod_nwp, 0);
|
|
|
|
/* Scan to find existence of the device */
|
|
err = nand_scan(this, 1);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Register the partitions */
|
|
err = mtd_device_register(mtd, partitions, num_partitions);
|
|
if (err)
|
|
goto err_nand_cleanup;
|
|
|
|
return 0;
|
|
|
|
err_nand_cleanup:
|
|
nand_cleanup(this);
|
|
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Clean up routine
|
|
*/
|
|
static int gpio_nand_remove(struct platform_device *pdev)
|
|
{
|
|
struct gpio_nand *priv = platform_get_drvdata(pdev);
|
|
struct mtd_info *mtd = nand_to_mtd(&priv->nand_chip);
|
|
|
|
/* Apply write protection */
|
|
gpiod_set_value(priv->gpiod_nwp, 1);
|
|
|
|
/* Unregister device */
|
|
nand_release(mtd_to_nand(mtd));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id gpio_nand_of_id_table[] = {
|
|
{
|
|
/* sentinel */
|
|
},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, gpio_nand_of_id_table);
|
|
|
|
static const struct platform_device_id gpio_nand_plat_id_table[] = {
|
|
{
|
|
.name = "ams-delta-nand",
|
|
}, {
|
|
/* sentinel */
|
|
},
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, gpio_nand_plat_id_table);
|
|
|
|
static struct platform_driver gpio_nand_driver = {
|
|
.probe = gpio_nand_probe,
|
|
.remove = gpio_nand_remove,
|
|
.id_table = gpio_nand_plat_id_table,
|
|
.driver = {
|
|
.name = "ams-delta-nand",
|
|
.of_match_table = of_match_ptr(gpio_nand_of_id_table),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(gpio_nand_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Jonathan McDowell <noodles@earth.li>");
|
|
MODULE_DESCRIPTION("Glue layer for NAND flash on Amstrad E3 (Delta)");
|