linux/sound/usb/line6/driver.c

673 lines
15 KiB
C

/*
* Line 6 Linux USB driver
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <sound/core.h>
#include <sound/initval.h>
#include "capture.h"
#include "driver.h"
#include "midi.h"
#include "playback.h"
#define DRIVER_AUTHOR "Markus Grabner <grabner@icg.tugraz.at>"
#define DRIVER_DESC "Line 6 USB Driver"
/*
This is Line 6's MIDI manufacturer ID.
*/
const unsigned char line6_midi_id[] = {
0x00, 0x01, 0x0c
};
EXPORT_SYMBOL_GPL(line6_midi_id);
/*
Code to request version of POD, Variax interface
(and maybe other devices).
*/
static const char line6_request_version[] = {
0xf0, 0x7e, 0x7f, 0x06, 0x01, 0xf7
};
/*
Class for asynchronous messages.
*/
struct message {
struct usb_line6 *line6;
const char *buffer;
int size;
int done;
};
/*
Forward declarations.
*/
static void line6_data_received(struct urb *urb);
static int line6_send_raw_message_async_part(struct message *msg,
struct urb *urb);
/*
Start to listen on endpoint.
*/
static int line6_start_listen(struct usb_line6 *line6)
{
int err;
usb_fill_int_urb(line6->urb_listen, line6->usbdev,
usb_rcvintpipe(line6->usbdev, line6->properties->ep_ctrl_r),
line6->buffer_listen, LINE6_BUFSIZE_LISTEN,
line6_data_received, line6, line6->interval);
line6->urb_listen->actual_length = 0;
err = usb_submit_urb(line6->urb_listen, GFP_ATOMIC);
return err;
}
/*
Stop listening on endpoint.
*/
static void line6_stop_listen(struct usb_line6 *line6)
{
usb_kill_urb(line6->urb_listen);
}
/*
Send raw message in pieces of wMaxPacketSize bytes.
*/
static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
int size)
{
int i, done = 0;
for (i = 0; i < size; i += line6->max_packet_size) {
int partial;
const char *frag_buf = buffer + i;
int frag_size = min(line6->max_packet_size, size - i);
int retval;
retval = usb_interrupt_msg(line6->usbdev,
usb_sndintpipe(line6->usbdev,
line6->properties->ep_ctrl_w),
(char *)frag_buf, frag_size,
&partial, LINE6_TIMEOUT * HZ);
if (retval) {
dev_err(line6->ifcdev,
"usb_interrupt_msg failed (%d)\n", retval);
break;
}
done += frag_size;
}
return done;
}
/*
Notification of completion of asynchronous request transmission.
*/
static void line6_async_request_sent(struct urb *urb)
{
struct message *msg = (struct message *)urb->context;
if (msg->done >= msg->size) {
usb_free_urb(urb);
kfree(msg);
} else
line6_send_raw_message_async_part(msg, urb);
}
/*
Asynchronously send part of a raw message.
*/
static int line6_send_raw_message_async_part(struct message *msg,
struct urb *urb)
{
int retval;
struct usb_line6 *line6 = msg->line6;
int done = msg->done;
int bytes = min(msg->size - done, line6->max_packet_size);
usb_fill_int_urb(urb, line6->usbdev,
usb_sndintpipe(line6->usbdev, line6->properties->ep_ctrl_w),
(char *)msg->buffer + done, bytes,
line6_async_request_sent, msg, line6->interval);
msg->done += bytes;
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval < 0) {
dev_err(line6->ifcdev, "%s: usb_submit_urb failed (%d)\n",
__func__, retval);
usb_free_urb(urb);
kfree(msg);
return retval;
}
return 0;
}
/*
Setup and start timer.
*/
void line6_start_timer(struct timer_list *timer, unsigned long msecs,
void (*function)(unsigned long), unsigned long data)
{
setup_timer(timer, function, data);
mod_timer(timer, jiffies + msecs_to_jiffies(msecs));
}
EXPORT_SYMBOL_GPL(line6_start_timer);
/*
Asynchronously send raw message.
*/
int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer,
int size)
{
struct message *msg;
struct urb *urb;
/* create message: */
msg = kmalloc(sizeof(struct message), GFP_ATOMIC);
if (msg == NULL)
return -ENOMEM;
/* create URB: */
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (urb == NULL) {
kfree(msg);
return -ENOMEM;
}
/* set message data: */
msg->line6 = line6;
msg->buffer = buffer;
msg->size = size;
msg->done = 0;
/* start sending: */
return line6_send_raw_message_async_part(msg, urb);
}
EXPORT_SYMBOL_GPL(line6_send_raw_message_async);
/*
Send asynchronous device version request.
*/
int line6_version_request_async(struct usb_line6 *line6)
{
char *buffer;
int retval;
buffer = kmemdup(line6_request_version,
sizeof(line6_request_version), GFP_ATOMIC);
if (buffer == NULL)
return -ENOMEM;
retval = line6_send_raw_message_async(line6, buffer,
sizeof(line6_request_version));
kfree(buffer);
return retval;
}
EXPORT_SYMBOL_GPL(line6_version_request_async);
/*
Send sysex message in pieces of wMaxPacketSize bytes.
*/
int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer,
int size)
{
return line6_send_raw_message(line6, buffer,
size + SYSEX_EXTRA_SIZE) -
SYSEX_EXTRA_SIZE;
}
EXPORT_SYMBOL_GPL(line6_send_sysex_message);
/*
Allocate buffer for sysex message and prepare header.
@param code sysex message code
@param size number of bytes between code and sysex end
*/
char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, int code2,
int size)
{
char *buffer = kmalloc(size + SYSEX_EXTRA_SIZE, GFP_ATOMIC);
if (!buffer)
return NULL;
buffer[0] = LINE6_SYSEX_BEGIN;
memcpy(buffer + 1, line6_midi_id, sizeof(line6_midi_id));
buffer[sizeof(line6_midi_id) + 1] = code1;
buffer[sizeof(line6_midi_id) + 2] = code2;
buffer[sizeof(line6_midi_id) + 3 + size] = LINE6_SYSEX_END;
return buffer;
}
EXPORT_SYMBOL_GPL(line6_alloc_sysex_buffer);
/*
Notification of data received from the Line 6 device.
*/
static void line6_data_received(struct urb *urb)
{
struct usb_line6 *line6 = (struct usb_line6 *)urb->context;
struct midi_buffer *mb = &line6->line6midi->midibuf_in;
int done;
if (urb->status == -ESHUTDOWN)
return;
done =
line6_midibuf_write(mb, urb->transfer_buffer, urb->actual_length);
if (done < urb->actual_length) {
line6_midibuf_ignore(mb, done);
dev_dbg(line6->ifcdev, "%d %d buffer overflow - message skipped\n",
done, urb->actual_length);
}
for (;;) {
done =
line6_midibuf_read(mb, line6->buffer_message,
LINE6_MESSAGE_MAXLEN);
if (done == 0)
break;
line6->message_length = done;
line6_midi_receive(line6, line6->buffer_message, done);
if (line6->process_message)
line6->process_message(line6);
}
line6_start_listen(line6);
}
#define LINE6_READ_WRITE_STATUS_DELAY 2 /* milliseconds */
#define LINE6_READ_WRITE_MAX_RETRIES 50
/*
Read data from device.
*/
int line6_read_data(struct usb_line6 *line6, unsigned address, void *data,
unsigned datalen)
{
struct usb_device *usbdev = line6->usbdev;
int ret;
unsigned char len;
unsigned count;
if (address > 0xffff || datalen > 0xff)
return -EINVAL;
/* query the serial number: */
ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
(datalen << 8) | 0x21, address,
NULL, 0, LINE6_TIMEOUT * HZ);
if (ret < 0) {
dev_err(line6->ifcdev, "read request failed (error %d)\n", ret);
return ret;
}
/* Wait for data length. We'll get 0xff until length arrives. */
for (count = 0; count < LINE6_READ_WRITE_MAX_RETRIES; count++) {
mdelay(LINE6_READ_WRITE_STATUS_DELAY);
ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE |
USB_DIR_IN,
0x0012, 0x0000, &len, 1,
LINE6_TIMEOUT * HZ);
if (ret < 0) {
dev_err(line6->ifcdev,
"receive length failed (error %d)\n", ret);
return ret;
}
if (len != 0xff)
break;
}
if (len == 0xff) {
dev_err(line6->ifcdev, "read failed after %d retries\n",
count);
return -EIO;
} else if (len != datalen) {
/* should be equal or something went wrong */
dev_err(line6->ifcdev,
"length mismatch (expected %d, got %d)\n",
(int)datalen, (int)len);
return -EIO;
}
/* receive the result: */
ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0x0013, 0x0000, data, datalen,
LINE6_TIMEOUT * HZ);
if (ret < 0) {
dev_err(line6->ifcdev, "read failed (error %d)\n", ret);
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(line6_read_data);
/*
Write data to device.
*/
int line6_write_data(struct usb_line6 *line6, unsigned address, void *data,
unsigned datalen)
{
struct usb_device *usbdev = line6->usbdev;
int ret;
unsigned char status;
int count;
if (address > 0xffff || datalen > 0xffff)
return -EINVAL;
ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
0x0022, address, data, datalen,
LINE6_TIMEOUT * HZ);
if (ret < 0) {
dev_err(line6->ifcdev,
"write request failed (error %d)\n", ret);
return ret;
}
for (count = 0; count < LINE6_READ_WRITE_MAX_RETRIES; count++) {
mdelay(LINE6_READ_WRITE_STATUS_DELAY);
ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE |
USB_DIR_IN,
0x0012, 0x0000,
&status, 1, LINE6_TIMEOUT * HZ);
if (ret < 0) {
dev_err(line6->ifcdev,
"receiving status failed (error %d)\n", ret);
return ret;
}
if (status != 0xff)
break;
}
if (status == 0xff) {
dev_err(line6->ifcdev, "write failed after %d retries\n",
count);
return -EIO;
} else if (status != 0) {
dev_err(line6->ifcdev, "write failed (error %d)\n", ret);
return -EIO;
}
return 0;
}
EXPORT_SYMBOL_GPL(line6_write_data);
/*
Read Line 6 device serial number.
(POD, TonePort, GuitarPort)
*/
int line6_read_serial_number(struct usb_line6 *line6, u32 *serial_number)
{
return line6_read_data(line6, 0x80d0, serial_number,
sizeof(*serial_number));
}
EXPORT_SYMBOL_GPL(line6_read_serial_number);
/*
Card destructor.
*/
static void line6_destruct(struct snd_card *card)
{
struct usb_line6 *line6 = card->private_data;
struct usb_device *usbdev = line6->usbdev;
/* free buffer memory first: */
kfree(line6->buffer_message);
kfree(line6->buffer_listen);
/* then free URBs: */
usb_free_urb(line6->urb_listen);
/* decrement reference counters: */
usb_put_dev(usbdev);
}
/* get data from endpoint descriptor (see usb_maxpacket): */
static void line6_get_interval(struct usb_line6 *line6)
{
struct usb_device *usbdev = line6->usbdev;
struct usb_host_endpoint *ep;
unsigned pipe = usb_rcvintpipe(usbdev, line6->properties->ep_ctrl_r);
unsigned epnum = usb_pipeendpoint(pipe);
ep = usbdev->ep_in[epnum];
if (ep) {
line6->interval = ep->desc.bInterval;
line6->max_packet_size = le16_to_cpu(ep->desc.wMaxPacketSize);
} else {
dev_err(line6->ifcdev,
"endpoint not available, using fallback values");
line6->interval = LINE6_FALLBACK_INTERVAL;
line6->max_packet_size = LINE6_FALLBACK_MAXPACKETSIZE;
}
}
static int line6_init_cap_control(struct usb_line6 *line6)
{
int ret;
/* initialize USB buffers: */
line6->buffer_listen = kmalloc(LINE6_BUFSIZE_LISTEN, GFP_KERNEL);
if (!line6->buffer_listen)
return -ENOMEM;
line6->buffer_message = kmalloc(LINE6_MESSAGE_MAXLEN, GFP_KERNEL);
if (!line6->buffer_message)
return -ENOMEM;
line6->urb_listen = usb_alloc_urb(0, GFP_KERNEL);
if (!line6->urb_listen)
return -ENOMEM;
ret = line6_start_listen(line6);
if (ret < 0) {
dev_err(line6->ifcdev, "cannot start listening: %d\n", ret);
return ret;
}
return 0;
}
/*
Probe USB device.
*/
int line6_probe(struct usb_interface *interface,
const struct usb_device_id *id,
const char *driver_name,
const struct line6_properties *properties,
int (*private_init)(struct usb_line6 *, const struct usb_device_id *id),
size_t data_size)
{
struct usb_device *usbdev = interface_to_usbdev(interface);
struct snd_card *card;
struct usb_line6 *line6;
int interface_number;
int ret;
if (WARN_ON(data_size < sizeof(*line6)))
return -EINVAL;
/* we don't handle multiple configurations */
if (usbdev->descriptor.bNumConfigurations != 1)
return -ENODEV;
ret = snd_card_new(&interface->dev,
SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
THIS_MODULE, data_size, &card);
if (ret < 0)
return ret;
/* store basic data: */
line6 = card->private_data;
line6->card = card;
line6->properties = properties;
line6->usbdev = usbdev;
line6->ifcdev = &interface->dev;
strcpy(card->id, properties->id);
strcpy(card->driver, driver_name);
strcpy(card->shortname, properties->name);
sprintf(card->longname, "Line 6 %s at USB %s", properties->name,
dev_name(line6->ifcdev));
card->private_free = line6_destruct;
usb_set_intfdata(interface, line6);
/* increment reference counters: */
usb_get_dev(usbdev);
/* initialize device info: */
dev_info(&interface->dev, "Line 6 %s found\n", properties->name);
/* query interface number */
interface_number = interface->cur_altsetting->desc.bInterfaceNumber;
ret = usb_set_interface(usbdev, interface_number,
properties->altsetting);
if (ret < 0) {
dev_err(&interface->dev, "set_interface failed\n");
goto error;
}
line6_get_interval(line6);
if (properties->capabilities & LINE6_CAP_CONTROL) {
ret = line6_init_cap_control(line6);
if (ret < 0)
goto error;
}
/* initialize device data based on device: */
ret = private_init(line6, id);
if (ret < 0)
goto error;
/* creation of additional special files should go here */
dev_info(&interface->dev, "Line 6 %s now attached\n",
properties->name);
return 0;
error:
if (line6->disconnect)
line6->disconnect(line6);
snd_card_free(card);
return ret;
}
EXPORT_SYMBOL_GPL(line6_probe);
/*
Line 6 device disconnected.
*/
void line6_disconnect(struct usb_interface *interface)
{
struct usb_line6 *line6 = usb_get_intfdata(interface);
struct usb_device *usbdev = interface_to_usbdev(interface);
if (!line6)
return;
if (WARN_ON(usbdev != line6->usbdev))
return;
if (line6->urb_listen != NULL)
line6_stop_listen(line6);
snd_card_disconnect(line6->card);
if (line6->line6pcm)
line6_pcm_disconnect(line6->line6pcm);
if (line6->disconnect)
line6->disconnect(line6);
dev_info(&interface->dev, "Line 6 %s now disconnected\n",
line6->properties->name);
/* make sure the device isn't destructed twice: */
usb_set_intfdata(interface, NULL);
snd_card_free_when_closed(line6->card);
}
EXPORT_SYMBOL_GPL(line6_disconnect);
#ifdef CONFIG_PM
/*
Suspend Line 6 device.
*/
int line6_suspend(struct usb_interface *interface, pm_message_t message)
{
struct usb_line6 *line6 = usb_get_intfdata(interface);
struct snd_line6_pcm *line6pcm = line6->line6pcm;
snd_power_change_state(line6->card, SNDRV_CTL_POWER_D3hot);
if (line6->properties->capabilities & LINE6_CAP_CONTROL)
line6_stop_listen(line6);
if (line6pcm != NULL) {
snd_pcm_suspend_all(line6pcm->pcm);
line6pcm->flags = 0;
}
return 0;
}
EXPORT_SYMBOL_GPL(line6_suspend);
/*
Resume Line 6 device.
*/
int line6_resume(struct usb_interface *interface)
{
struct usb_line6 *line6 = usb_get_intfdata(interface);
if (line6->properties->capabilities & LINE6_CAP_CONTROL)
line6_start_listen(line6);
snd_power_change_state(line6->card, SNDRV_CTL_POWER_D0);
return 0;
}
EXPORT_SYMBOL_GPL(line6_resume);
#endif /* CONFIG_PM */
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");