mirror of https://gitee.com/openkylin/linux.git
668 lines
18 KiB
C
668 lines
18 KiB
C
/*
|
|
* drivers/net/phy/micrel.c
|
|
*
|
|
* Driver for Micrel PHYs
|
|
*
|
|
* Author: David J. Choi
|
|
*
|
|
* Copyright (c) 2010-2013 Micrel, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* Support : Micrel Phys:
|
|
* Giga phys: ksz9021, ksz9031
|
|
* 100/10 Phys : ksz8001, ksz8721, ksz8737, ksz8041
|
|
* ksz8021, ksz8031, ksz8051,
|
|
* ksz8081, ksz8091,
|
|
* ksz8061,
|
|
* Switch : ksz8873, ksz886x
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/micrel_phy.h>
|
|
#include <linux/of.h>
|
|
|
|
/* Operation Mode Strap Override */
|
|
#define MII_KSZPHY_OMSO 0x16
|
|
#define KSZPHY_OMSO_B_CAST_OFF (1 << 9)
|
|
#define KSZPHY_OMSO_RMII_OVERRIDE (1 << 1)
|
|
#define KSZPHY_OMSO_MII_OVERRIDE (1 << 0)
|
|
|
|
/* general Interrupt control/status reg in vendor specific block. */
|
|
#define MII_KSZPHY_INTCS 0x1B
|
|
#define KSZPHY_INTCS_JABBER (1 << 15)
|
|
#define KSZPHY_INTCS_RECEIVE_ERR (1 << 14)
|
|
#define KSZPHY_INTCS_PAGE_RECEIVE (1 << 13)
|
|
#define KSZPHY_INTCS_PARELLEL (1 << 12)
|
|
#define KSZPHY_INTCS_LINK_PARTNER_ACK (1 << 11)
|
|
#define KSZPHY_INTCS_LINK_DOWN (1 << 10)
|
|
#define KSZPHY_INTCS_REMOTE_FAULT (1 << 9)
|
|
#define KSZPHY_INTCS_LINK_UP (1 << 8)
|
|
#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\
|
|
KSZPHY_INTCS_LINK_DOWN)
|
|
|
|
/* general PHY control reg in vendor specific block. */
|
|
#define MII_KSZPHY_CTRL 0x1F
|
|
/* bitmap of PHY register to set interrupt mode */
|
|
#define KSZPHY_CTRL_INT_ACTIVE_HIGH (1 << 9)
|
|
#define KSZ9021_CTRL_INT_ACTIVE_HIGH (1 << 14)
|
|
#define KS8737_CTRL_INT_ACTIVE_HIGH (1 << 14)
|
|
#define KSZ8051_RMII_50MHZ_CLK (1 << 7)
|
|
|
|
/* Write/read to/from extended registers */
|
|
#define MII_KSZPHY_EXTREG 0x0b
|
|
#define KSZPHY_EXTREG_WRITE 0x8000
|
|
|
|
#define MII_KSZPHY_EXTREG_WRITE 0x0c
|
|
#define MII_KSZPHY_EXTREG_READ 0x0d
|
|
|
|
/* Extended registers */
|
|
#define MII_KSZPHY_CLK_CONTROL_PAD_SKEW 0x104
|
|
#define MII_KSZPHY_RX_DATA_PAD_SKEW 0x105
|
|
#define MII_KSZPHY_TX_DATA_PAD_SKEW 0x106
|
|
|
|
#define PS_TO_REG 200
|
|
|
|
static int ksz_config_flags(struct phy_device *phydev)
|
|
{
|
|
int regval;
|
|
|
|
if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) {
|
|
regval = phy_read(phydev, MII_KSZPHY_CTRL);
|
|
regval |= KSZ8051_RMII_50MHZ_CLK;
|
|
return phy_write(phydev, MII_KSZPHY_CTRL, regval);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int kszphy_extended_write(struct phy_device *phydev,
|
|
u32 regnum, u16 val)
|
|
{
|
|
phy_write(phydev, MII_KSZPHY_EXTREG, KSZPHY_EXTREG_WRITE | regnum);
|
|
return phy_write(phydev, MII_KSZPHY_EXTREG_WRITE, val);
|
|
}
|
|
|
|
static int kszphy_extended_read(struct phy_device *phydev,
|
|
u32 regnum)
|
|
{
|
|
phy_write(phydev, MII_KSZPHY_EXTREG, regnum);
|
|
return phy_read(phydev, MII_KSZPHY_EXTREG_READ);
|
|
}
|
|
|
|
static int kszphy_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
/* bit[7..0] int status, which is a read and clear register. */
|
|
int rc;
|
|
|
|
rc = phy_read(phydev, MII_KSZPHY_INTCS);
|
|
|
|
return (rc < 0) ? rc : 0;
|
|
}
|
|
|
|
static int kszphy_set_interrupt(struct phy_device *phydev)
|
|
{
|
|
int temp;
|
|
temp = (PHY_INTERRUPT_ENABLED == phydev->interrupts) ?
|
|
KSZPHY_INTCS_ALL : 0;
|
|
return phy_write(phydev, MII_KSZPHY_INTCS, temp);
|
|
}
|
|
|
|
static int kszphy_config_intr(struct phy_device *phydev)
|
|
{
|
|
int temp, rc;
|
|
|
|
/* set the interrupt pin active low */
|
|
temp = phy_read(phydev, MII_KSZPHY_CTRL);
|
|
temp &= ~KSZPHY_CTRL_INT_ACTIVE_HIGH;
|
|
phy_write(phydev, MII_KSZPHY_CTRL, temp);
|
|
rc = kszphy_set_interrupt(phydev);
|
|
return rc < 0 ? rc : 0;
|
|
}
|
|
|
|
static int ksz9021_config_intr(struct phy_device *phydev)
|
|
{
|
|
int temp, rc;
|
|
|
|
/* set the interrupt pin active low */
|
|
temp = phy_read(phydev, MII_KSZPHY_CTRL);
|
|
temp &= ~KSZ9021_CTRL_INT_ACTIVE_HIGH;
|
|
phy_write(phydev, MII_KSZPHY_CTRL, temp);
|
|
rc = kszphy_set_interrupt(phydev);
|
|
return rc < 0 ? rc : 0;
|
|
}
|
|
|
|
static int ks8737_config_intr(struct phy_device *phydev)
|
|
{
|
|
int temp, rc;
|
|
|
|
/* set the interrupt pin active low */
|
|
temp = phy_read(phydev, MII_KSZPHY_CTRL);
|
|
temp &= ~KS8737_CTRL_INT_ACTIVE_HIGH;
|
|
phy_write(phydev, MII_KSZPHY_CTRL, temp);
|
|
rc = kszphy_set_interrupt(phydev);
|
|
return rc < 0 ? rc : 0;
|
|
}
|
|
|
|
static int kszphy_setup_led(struct phy_device *phydev,
|
|
unsigned int reg, unsigned int shift)
|
|
{
|
|
|
|
struct device *dev = &phydev->dev;
|
|
struct device_node *of_node = dev->of_node;
|
|
int rc, temp;
|
|
u32 val;
|
|
|
|
if (!of_node && dev->parent->of_node)
|
|
of_node = dev->parent->of_node;
|
|
|
|
if (of_property_read_u32(of_node, "micrel,led-mode", &val))
|
|
return 0;
|
|
|
|
temp = phy_read(phydev, reg);
|
|
if (temp < 0)
|
|
return temp;
|
|
|
|
temp &= ~(3 << shift);
|
|
temp |= val << shift;
|
|
rc = phy_write(phydev, reg, temp);
|
|
|
|
return rc < 0 ? rc : 0;
|
|
}
|
|
|
|
static int kszphy_config_init(struct phy_device *phydev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int kszphy_config_init_led8041(struct phy_device *phydev)
|
|
{
|
|
/* single led control, register 0x1e bits 15..14 */
|
|
return kszphy_setup_led(phydev, 0x1e, 14);
|
|
}
|
|
|
|
static int ksz8021_config_init(struct phy_device *phydev)
|
|
{
|
|
const u16 val = KSZPHY_OMSO_B_CAST_OFF | KSZPHY_OMSO_RMII_OVERRIDE;
|
|
int rc;
|
|
|
|
rc = kszphy_setup_led(phydev, 0x1f, 4);
|
|
if (rc)
|
|
dev_err(&phydev->dev, "failed to set led mode\n");
|
|
|
|
phy_write(phydev, MII_KSZPHY_OMSO, val);
|
|
rc = ksz_config_flags(phydev);
|
|
return rc < 0 ? rc : 0;
|
|
}
|
|
|
|
static int ks8051_config_init(struct phy_device *phydev)
|
|
{
|
|
int rc;
|
|
|
|
rc = kszphy_setup_led(phydev, 0x1f, 4);
|
|
if (rc)
|
|
dev_err(&phydev->dev, "failed to set led mode\n");
|
|
|
|
rc = ksz_config_flags(phydev);
|
|
return rc < 0 ? rc : 0;
|
|
}
|
|
|
|
static int ksz9021_load_values_from_of(struct phy_device *phydev,
|
|
struct device_node *of_node, u16 reg,
|
|
char *field1, char *field2,
|
|
char *field3, char *field4)
|
|
{
|
|
int val1 = -1;
|
|
int val2 = -2;
|
|
int val3 = -3;
|
|
int val4 = -4;
|
|
int newval;
|
|
int matches = 0;
|
|
|
|
if (!of_property_read_u32(of_node, field1, &val1))
|
|
matches++;
|
|
|
|
if (!of_property_read_u32(of_node, field2, &val2))
|
|
matches++;
|
|
|
|
if (!of_property_read_u32(of_node, field3, &val3))
|
|
matches++;
|
|
|
|
if (!of_property_read_u32(of_node, field4, &val4))
|
|
matches++;
|
|
|
|
if (!matches)
|
|
return 0;
|
|
|
|
if (matches < 4)
|
|
newval = kszphy_extended_read(phydev, reg);
|
|
else
|
|
newval = 0;
|
|
|
|
if (val1 != -1)
|
|
newval = ((newval & 0xfff0) | ((val1 / PS_TO_REG) & 0xf) << 0);
|
|
|
|
if (val2 != -2)
|
|
newval = ((newval & 0xff0f) | ((val2 / PS_TO_REG) & 0xf) << 4);
|
|
|
|
if (val3 != -3)
|
|
newval = ((newval & 0xf0ff) | ((val3 / PS_TO_REG) & 0xf) << 8);
|
|
|
|
if (val4 != -4)
|
|
newval = ((newval & 0x0fff) | ((val4 / PS_TO_REG) & 0xf) << 12);
|
|
|
|
return kszphy_extended_write(phydev, reg, newval);
|
|
}
|
|
|
|
static int ksz9021_config_init(struct phy_device *phydev)
|
|
{
|
|
struct device *dev = &phydev->dev;
|
|
struct device_node *of_node = dev->of_node;
|
|
|
|
if (!of_node && dev->parent->of_node)
|
|
of_node = dev->parent->of_node;
|
|
|
|
if (of_node) {
|
|
ksz9021_load_values_from_of(phydev, of_node,
|
|
MII_KSZPHY_CLK_CONTROL_PAD_SKEW,
|
|
"txen-skew-ps", "txc-skew-ps",
|
|
"rxdv-skew-ps", "rxc-skew-ps");
|
|
ksz9021_load_values_from_of(phydev, of_node,
|
|
MII_KSZPHY_RX_DATA_PAD_SKEW,
|
|
"rxd0-skew-ps", "rxd1-skew-ps",
|
|
"rxd2-skew-ps", "rxd3-skew-ps");
|
|
ksz9021_load_values_from_of(phydev, of_node,
|
|
MII_KSZPHY_TX_DATA_PAD_SKEW,
|
|
"txd0-skew-ps", "txd1-skew-ps",
|
|
"txd2-skew-ps", "txd3-skew-ps");
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#define MII_KSZ9031RN_MMD_CTRL_REG 0x0d
|
|
#define MII_KSZ9031RN_MMD_REGDATA_REG 0x0e
|
|
#define OP_DATA 1
|
|
#define KSZ9031_PS_TO_REG 60
|
|
|
|
/* Extended registers */
|
|
#define MII_KSZ9031RN_CONTROL_PAD_SKEW 4
|
|
#define MII_KSZ9031RN_RX_DATA_PAD_SKEW 5
|
|
#define MII_KSZ9031RN_TX_DATA_PAD_SKEW 6
|
|
#define MII_KSZ9031RN_CLK_PAD_SKEW 8
|
|
|
|
static int ksz9031_extended_write(struct phy_device *phydev,
|
|
u8 mode, u32 dev_addr, u32 regnum, u16 val)
|
|
{
|
|
phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
|
|
phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
|
|
phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
|
|
return phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, val);
|
|
}
|
|
|
|
static int ksz9031_extended_read(struct phy_device *phydev,
|
|
u8 mode, u32 dev_addr, u32 regnum)
|
|
{
|
|
phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
|
|
phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
|
|
phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
|
|
return phy_read(phydev, MII_KSZ9031RN_MMD_REGDATA_REG);
|
|
}
|
|
|
|
static int ksz9031_of_load_skew_values(struct phy_device *phydev,
|
|
struct device_node *of_node,
|
|
u16 reg, size_t field_sz,
|
|
char *field[], u8 numfields)
|
|
{
|
|
int val[4] = {-1, -2, -3, -4};
|
|
int matches = 0;
|
|
u16 mask;
|
|
u16 maxval;
|
|
u16 newval;
|
|
int i;
|
|
|
|
for (i = 0; i < numfields; i++)
|
|
if (!of_property_read_u32(of_node, field[i], val + i))
|
|
matches++;
|
|
|
|
if (!matches)
|
|
return 0;
|
|
|
|
if (matches < numfields)
|
|
newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg);
|
|
else
|
|
newval = 0;
|
|
|
|
maxval = (field_sz == 4) ? 0xf : 0x1f;
|
|
for (i = 0; i < numfields; i++)
|
|
if (val[i] != -(i + 1)) {
|
|
mask = 0xffff;
|
|
mask ^= maxval << (field_sz * i);
|
|
newval = (newval & mask) |
|
|
(((val[i] / KSZ9031_PS_TO_REG) & maxval)
|
|
<< (field_sz * i));
|
|
}
|
|
|
|
return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval);
|
|
}
|
|
|
|
static int ksz9031_config_init(struct phy_device *phydev)
|
|
{
|
|
struct device *dev = &phydev->dev;
|
|
struct device_node *of_node = dev->of_node;
|
|
char *clk_skews[2] = {"rxc-skew-ps", "txc-skew-ps"};
|
|
char *rx_data_skews[4] = {
|
|
"rxd0-skew-ps", "rxd1-skew-ps",
|
|
"rxd2-skew-ps", "rxd3-skew-ps"
|
|
};
|
|
char *tx_data_skews[4] = {
|
|
"txd0-skew-ps", "txd1-skew-ps",
|
|
"txd2-skew-ps", "txd3-skew-ps"
|
|
};
|
|
char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"};
|
|
|
|
if (!of_node && dev->parent->of_node)
|
|
of_node = dev->parent->of_node;
|
|
|
|
if (of_node) {
|
|
ksz9031_of_load_skew_values(phydev, of_node,
|
|
MII_KSZ9031RN_CLK_PAD_SKEW, 5,
|
|
clk_skews, 2);
|
|
|
|
ksz9031_of_load_skew_values(phydev, of_node,
|
|
MII_KSZ9031RN_CONTROL_PAD_SKEW, 4,
|
|
control_skews, 2);
|
|
|
|
ksz9031_of_load_skew_values(phydev, of_node,
|
|
MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4,
|
|
rx_data_skews, 4);
|
|
|
|
ksz9031_of_load_skew_values(phydev, of_node,
|
|
MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
|
|
tx_data_skews, 4);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#define KSZ8873MLL_GLOBAL_CONTROL_4 0x06
|
|
#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX (1 << 6)
|
|
#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED (1 << 4)
|
|
static int ksz8873mll_read_status(struct phy_device *phydev)
|
|
{
|
|
int regval;
|
|
|
|
/* dummy read */
|
|
regval = phy_read(phydev, KSZ8873MLL_GLOBAL_CONTROL_4);
|
|
|
|
regval = phy_read(phydev, KSZ8873MLL_GLOBAL_CONTROL_4);
|
|
|
|
if (regval & KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX)
|
|
phydev->duplex = DUPLEX_HALF;
|
|
else
|
|
phydev->duplex = DUPLEX_FULL;
|
|
|
|
if (regval & KSZ8873MLL_GLOBAL_CONTROL_4_SPEED)
|
|
phydev->speed = SPEED_10;
|
|
else
|
|
phydev->speed = SPEED_100;
|
|
|
|
phydev->link = 1;
|
|
phydev->pause = phydev->asym_pause = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ksz8873mll_config_aneg(struct phy_device *phydev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/* This routine returns -1 as an indication to the caller that the
|
|
* Micrel ksz9021 10/100/1000 PHY does not support standard IEEE
|
|
* MMD extended PHY registers.
|
|
*/
|
|
static int
|
|
ksz9021_rd_mmd_phyreg(struct phy_device *phydev, int ptrad, int devnum,
|
|
int regnum)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
/* This routine does nothing since the Micrel ksz9021 does not support
|
|
* standard IEEE MMD extended PHY registers.
|
|
*/
|
|
static void
|
|
ksz9021_wr_mmd_phyreg(struct phy_device *phydev, int ptrad, int devnum,
|
|
int regnum, u32 val)
|
|
{
|
|
}
|
|
|
|
static struct phy_driver ksphy_driver[] = {
|
|
{
|
|
.phy_id = PHY_ID_KS8737,
|
|
.phy_id_mask = 0x00fffff0,
|
|
.name = "Micrel KS8737",
|
|
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
|
|
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = ks8737_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8021,
|
|
.phy_id_mask = 0x00ffffff,
|
|
.name = "Micrel KSZ8021 or KSZ8031",
|
|
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
|
|
SUPPORTED_Asym_Pause),
|
|
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
.config_init = ksz8021_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8031,
|
|
.phy_id_mask = 0x00ffffff,
|
|
.name = "Micrel KSZ8031",
|
|
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
|
|
SUPPORTED_Asym_Pause),
|
|
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
.config_init = ksz8021_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8041,
|
|
.phy_id_mask = 0x00fffff0,
|
|
.name = "Micrel KSZ8041",
|
|
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
|
|
| SUPPORTED_Asym_Pause),
|
|
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
.config_init = kszphy_config_init_led8041,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8041RNLI,
|
|
.phy_id_mask = 0x00fffff0,
|
|
.name = "Micrel KSZ8041RNLI",
|
|
.features = PHY_BASIC_FEATURES |
|
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
|
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
.config_init = kszphy_config_init_led8041,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8051,
|
|
.phy_id_mask = 0x00fffff0,
|
|
.name = "Micrel KSZ8051",
|
|
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
|
|
| SUPPORTED_Asym_Pause),
|
|
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
.config_init = ks8051_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8001,
|
|
.name = "Micrel KSZ8001 or KS8721",
|
|
.phy_id_mask = 0x00ffffff,
|
|
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
|
|
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
.config_init = kszphy_config_init_led8041,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8081,
|
|
.name = "Micrel KSZ8081 or KSZ8091",
|
|
.phy_id_mask = 0x00fffff0,
|
|
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
|
|
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8061,
|
|
.name = "Micrel KSZ8061",
|
|
.phy_id_mask = 0x00fffff0,
|
|
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
|
|
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ9021,
|
|
.phy_id_mask = 0x000ffffe,
|
|
.name = "Micrel KSZ9021 Gigabit PHY",
|
|
.features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
|
|
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
.config_init = ksz9021_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = ksz9021_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.read_mmd_indirect = ksz9021_rd_mmd_phyreg,
|
|
.write_mmd_indirect = ksz9021_wr_mmd_phyreg,
|
|
.driver = { .owner = THIS_MODULE, },
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ9031,
|
|
.phy_id_mask = 0x00fffff0,
|
|
.name = "Micrel KSZ9031 Gigabit PHY",
|
|
.features = (PHY_GBIT_FEATURES | SUPPORTED_Pause
|
|
| SUPPORTED_Asym_Pause),
|
|
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
.config_init = ksz9031_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = ksz9021_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.driver = { .owner = THIS_MODULE, },
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8873MLL,
|
|
.phy_id_mask = 0x00fffff0,
|
|
.name = "Micrel KSZ8873MLL Switch",
|
|
.features = (SUPPORTED_Pause | SUPPORTED_Asym_Pause),
|
|
.flags = PHY_HAS_MAGICANEG,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = ksz8873mll_config_aneg,
|
|
.read_status = ksz8873mll_read_status,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.driver = { .owner = THIS_MODULE, },
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ886X,
|
|
.phy_id_mask = 0x00fffff0,
|
|
.name = "Micrel KSZ886X Switch",
|
|
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
|
|
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.driver = { .owner = THIS_MODULE, },
|
|
} };
|
|
|
|
static int __init ksphy_init(void)
|
|
{
|
|
return phy_drivers_register(ksphy_driver,
|
|
ARRAY_SIZE(ksphy_driver));
|
|
}
|
|
|
|
static void __exit ksphy_exit(void)
|
|
{
|
|
phy_drivers_unregister(ksphy_driver,
|
|
ARRAY_SIZE(ksphy_driver));
|
|
}
|
|
|
|
module_init(ksphy_init);
|
|
module_exit(ksphy_exit);
|
|
|
|
MODULE_DESCRIPTION("Micrel PHY driver");
|
|
MODULE_AUTHOR("David J. Choi");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static struct mdio_device_id __maybe_unused micrel_tbl[] = {
|
|
{ PHY_ID_KSZ9021, 0x000ffffe },
|
|
{ PHY_ID_KSZ9031, 0x00fffff0 },
|
|
{ PHY_ID_KSZ8001, 0x00ffffff },
|
|
{ PHY_ID_KS8737, 0x00fffff0 },
|
|
{ PHY_ID_KSZ8021, 0x00ffffff },
|
|
{ PHY_ID_KSZ8031, 0x00ffffff },
|
|
{ PHY_ID_KSZ8041, 0x00fffff0 },
|
|
{ PHY_ID_KSZ8051, 0x00fffff0 },
|
|
{ PHY_ID_KSZ8061, 0x00fffff0 },
|
|
{ PHY_ID_KSZ8081, 0x00fffff0 },
|
|
{ PHY_ID_KSZ8873MLL, 0x00fffff0 },
|
|
{ PHY_ID_KSZ886X, 0x00fffff0 },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, micrel_tbl);
|