mirror of https://gitee.com/openkylin/linux.git
289 lines
7.4 KiB
C
289 lines
7.4 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
*
|
|
* Copyright (C) 2010 John Crispin <john@phrozen.org>
|
|
* Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de>
|
|
* Based on EP93xx wdt driver
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/watchdog.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/mfd/syscon.h>
|
|
|
|
#include <lantiq_soc.h>
|
|
|
|
#define LTQ_XRX_RCU_RST_STAT 0x0014
|
|
#define LTQ_XRX_RCU_RST_STAT_WDT BIT(31)
|
|
|
|
/* CPU0 Reset Source Register */
|
|
#define LTQ_FALCON_SYS1_CPU0RS 0x0060
|
|
/* reset cause mask */
|
|
#define LTQ_FALCON_SYS1_CPU0RS_MASK 0x0007
|
|
#define LTQ_FALCON_SYS1_CPU0RS_WDT 0x02
|
|
|
|
/*
|
|
* Section 3.4 of the datasheet
|
|
* The password sequence protects the WDT control register from unintended
|
|
* write actions, which might cause malfunction of the WDT.
|
|
*
|
|
* essentially the following two magic passwords need to be written to allow
|
|
* IO access to the WDT core
|
|
*/
|
|
#define LTQ_WDT_CR_PW1 0x00BE0000
|
|
#define LTQ_WDT_CR_PW2 0x00DC0000
|
|
|
|
#define LTQ_WDT_CR 0x0 /* watchdog control register */
|
|
#define LTQ_WDT_CR_GEN BIT(31) /* enable bit */
|
|
/* Pre-warning limit set to 1/16 of max WDT period */
|
|
#define LTQ_WDT_CR_PWL (0x3 << 26)
|
|
/* set clock divider to 0x40000 */
|
|
#define LTQ_WDT_CR_CLKDIV (0x3 << 24)
|
|
#define LTQ_WDT_CR_PW_MASK GENMASK(23, 16) /* Password field */
|
|
#define LTQ_WDT_CR_MAX_TIMEOUT ((1 << 16) - 1) /* The reload field is 16 bit */
|
|
#define LTQ_WDT_SR 0x8 /* watchdog status register */
|
|
#define LTQ_WDT_SR_EN BIT(31) /* Enable */
|
|
#define LTQ_WDT_SR_VALUE_MASK GENMASK(15, 0) /* Timer value */
|
|
|
|
#define LTQ_WDT_DIVIDER 0x40000
|
|
|
|
static bool nowayout = WATCHDOG_NOWAYOUT;
|
|
|
|
struct ltq_wdt_hw {
|
|
int (*bootstatus_get)(struct device *dev);
|
|
};
|
|
|
|
struct ltq_wdt_priv {
|
|
struct watchdog_device wdt;
|
|
void __iomem *membase;
|
|
unsigned long clk_rate;
|
|
};
|
|
|
|
static u32 ltq_wdt_r32(struct ltq_wdt_priv *priv, u32 offset)
|
|
{
|
|
return __raw_readl(priv->membase + offset);
|
|
}
|
|
|
|
static void ltq_wdt_w32(struct ltq_wdt_priv *priv, u32 val, u32 offset)
|
|
{
|
|
__raw_writel(val, priv->membase + offset);
|
|
}
|
|
|
|
static void ltq_wdt_mask(struct ltq_wdt_priv *priv, u32 clear, u32 set,
|
|
u32 offset)
|
|
{
|
|
u32 val = ltq_wdt_r32(priv, offset);
|
|
|
|
val &= ~(clear);
|
|
val |= set;
|
|
ltq_wdt_w32(priv, val, offset);
|
|
}
|
|
|
|
static struct ltq_wdt_priv *ltq_wdt_get_priv(struct watchdog_device *wdt)
|
|
{
|
|
return container_of(wdt, struct ltq_wdt_priv, wdt);
|
|
}
|
|
|
|
static struct watchdog_info ltq_wdt_info = {
|
|
.options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
|
|
WDIOF_CARDRESET,
|
|
.identity = "ltq_wdt",
|
|
};
|
|
|
|
static int ltq_wdt_start(struct watchdog_device *wdt)
|
|
{
|
|
struct ltq_wdt_priv *priv = ltq_wdt_get_priv(wdt);
|
|
u32 timeout;
|
|
|
|
timeout = wdt->timeout * priv->clk_rate;
|
|
|
|
ltq_wdt_mask(priv, LTQ_WDT_CR_PW_MASK, LTQ_WDT_CR_PW1, LTQ_WDT_CR);
|
|
/* write the second magic plus the configuration and new timeout */
|
|
ltq_wdt_mask(priv, LTQ_WDT_CR_PW_MASK | LTQ_WDT_CR_MAX_TIMEOUT,
|
|
LTQ_WDT_CR_GEN | LTQ_WDT_CR_PWL | LTQ_WDT_CR_CLKDIV |
|
|
LTQ_WDT_CR_PW2 | timeout,
|
|
LTQ_WDT_CR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ltq_wdt_stop(struct watchdog_device *wdt)
|
|
{
|
|
struct ltq_wdt_priv *priv = ltq_wdt_get_priv(wdt);
|
|
|
|
ltq_wdt_mask(priv, LTQ_WDT_CR_PW_MASK, LTQ_WDT_CR_PW1, LTQ_WDT_CR);
|
|
ltq_wdt_mask(priv, LTQ_WDT_CR_GEN | LTQ_WDT_CR_PW_MASK,
|
|
LTQ_WDT_CR_PW2, LTQ_WDT_CR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ltq_wdt_ping(struct watchdog_device *wdt)
|
|
{
|
|
struct ltq_wdt_priv *priv = ltq_wdt_get_priv(wdt);
|
|
u32 timeout;
|
|
|
|
timeout = wdt->timeout * priv->clk_rate;
|
|
|
|
ltq_wdt_mask(priv, LTQ_WDT_CR_PW_MASK, LTQ_WDT_CR_PW1, LTQ_WDT_CR);
|
|
/* write the second magic plus the configuration and new timeout */
|
|
ltq_wdt_mask(priv, LTQ_WDT_CR_PW_MASK | LTQ_WDT_CR_MAX_TIMEOUT,
|
|
LTQ_WDT_CR_PW2 | timeout, LTQ_WDT_CR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int ltq_wdt_get_timeleft(struct watchdog_device *wdt)
|
|
{
|
|
struct ltq_wdt_priv *priv = ltq_wdt_get_priv(wdt);
|
|
u64 timeout;
|
|
|
|
timeout = ltq_wdt_r32(priv, LTQ_WDT_SR) & LTQ_WDT_SR_VALUE_MASK;
|
|
return do_div(timeout, priv->clk_rate);
|
|
}
|
|
|
|
static const struct watchdog_ops ltq_wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = ltq_wdt_start,
|
|
.stop = ltq_wdt_stop,
|
|
.ping = ltq_wdt_ping,
|
|
.get_timeleft = ltq_wdt_get_timeleft,
|
|
};
|
|
|
|
static int ltq_wdt_xrx_bootstatus_get(struct device *dev)
|
|
{
|
|
struct regmap *rcu_regmap;
|
|
u32 val;
|
|
int err;
|
|
|
|
rcu_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "regmap");
|
|
if (IS_ERR(rcu_regmap))
|
|
return PTR_ERR(rcu_regmap);
|
|
|
|
err = regmap_read(rcu_regmap, LTQ_XRX_RCU_RST_STAT, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
if (val & LTQ_XRX_RCU_RST_STAT_WDT)
|
|
return WDIOF_CARDRESET;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ltq_wdt_falcon_bootstatus_get(struct device *dev)
|
|
{
|
|
struct regmap *rcu_regmap;
|
|
u32 val;
|
|
int err;
|
|
|
|
rcu_regmap = syscon_regmap_lookup_by_phandle(dev->of_node,
|
|
"lantiq,rcu");
|
|
if (IS_ERR(rcu_regmap))
|
|
return PTR_ERR(rcu_regmap);
|
|
|
|
err = regmap_read(rcu_regmap, LTQ_FALCON_SYS1_CPU0RS, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
if ((val & LTQ_FALCON_SYS1_CPU0RS_MASK) == LTQ_FALCON_SYS1_CPU0RS_WDT)
|
|
return WDIOF_CARDRESET;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ltq_wdt_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct ltq_wdt_priv *priv;
|
|
struct watchdog_device *wdt;
|
|
struct clk *clk;
|
|
const struct ltq_wdt_hw *ltq_wdt_hw;
|
|
int ret;
|
|
u32 status;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->membase = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(priv->membase))
|
|
return PTR_ERR(priv->membase);
|
|
|
|
/* we do not need to enable the clock as it is always running */
|
|
clk = clk_get_io();
|
|
priv->clk_rate = clk_get_rate(clk) / LTQ_WDT_DIVIDER;
|
|
if (!priv->clk_rate) {
|
|
dev_err(dev, "clock rate less than divider %i\n",
|
|
LTQ_WDT_DIVIDER);
|
|
return -EINVAL;
|
|
}
|
|
|
|
wdt = &priv->wdt;
|
|
wdt->info = <q_wdt_info;
|
|
wdt->ops = <q_wdt_ops;
|
|
wdt->min_timeout = 1;
|
|
wdt->max_timeout = LTQ_WDT_CR_MAX_TIMEOUT / priv->clk_rate;
|
|
wdt->timeout = wdt->max_timeout;
|
|
wdt->parent = dev;
|
|
|
|
ltq_wdt_hw = of_device_get_match_data(dev);
|
|
if (ltq_wdt_hw && ltq_wdt_hw->bootstatus_get) {
|
|
ret = ltq_wdt_hw->bootstatus_get(dev);
|
|
if (ret >= 0)
|
|
wdt->bootstatus = ret;
|
|
}
|
|
|
|
watchdog_set_nowayout(wdt, nowayout);
|
|
watchdog_init_timeout(wdt, 0, dev);
|
|
|
|
status = ltq_wdt_r32(priv, LTQ_WDT_SR);
|
|
if (status & LTQ_WDT_SR_EN) {
|
|
/*
|
|
* If the watchdog is already running overwrite it with our
|
|
* new settings. Stop is not needed as the start call will
|
|
* replace all settings anyway.
|
|
*/
|
|
ltq_wdt_start(wdt);
|
|
set_bit(WDOG_HW_RUNNING, &wdt->status);
|
|
}
|
|
|
|
return devm_watchdog_register_device(dev, wdt);
|
|
}
|
|
|
|
static const struct ltq_wdt_hw ltq_wdt_xrx100 = {
|
|
.bootstatus_get = ltq_wdt_xrx_bootstatus_get,
|
|
};
|
|
|
|
static const struct ltq_wdt_hw ltq_wdt_falcon = {
|
|
.bootstatus_get = ltq_wdt_falcon_bootstatus_get,
|
|
};
|
|
|
|
static const struct of_device_id ltq_wdt_match[] = {
|
|
{ .compatible = "lantiq,wdt", .data = NULL },
|
|
{ .compatible = "lantiq,xrx100-wdt", .data = <q_wdt_xrx100 },
|
|
{ .compatible = "lantiq,falcon-wdt", .data = <q_wdt_falcon },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ltq_wdt_match);
|
|
|
|
static struct platform_driver ltq_wdt_driver = {
|
|
.probe = ltq_wdt_probe,
|
|
.driver = {
|
|
.name = "wdt",
|
|
.of_match_table = ltq_wdt_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(ltq_wdt_driver);
|
|
|
|
module_param(nowayout, bool, 0);
|
|
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
|
|
MODULE_AUTHOR("John Crispin <john@phrozen.org>");
|
|
MODULE_DESCRIPTION("Lantiq SoC Watchdog");
|
|
MODULE_LICENSE("GPL");
|