linux/drivers/mmc/core
Srinivas Kandagatla 64b12a68a9 mmc: core: fix prepared requests while doing bkops
While starting the bkops the previously prepared request should be canceled
and restarted after the bkops. As the prepared resource might already
setup the dma channels and ready to be started. Now with the arrival of bkops
request this prepared request can be serviced ONLY after the bkops. So
holding on to the prepared request in the host driver is confusing at
this point in time, so it makes sense to cleanup such dangling requests and
reissue this request once bkops is done.
Canceling the prepared request would give opportunity to the host drivers
to perform cleanup on the prepared request.

Without this patch host drivers like mmci gets confused when a blocking
request like send_ext_csd(CMD8) is issued while there is already a prepared
request. With the help of this patch, the driver can better manage such
blocking requests and cleanup the prepared requests which are not started yet.

Without this patch I hit below crash on Qualcomm APQ8064 based IFC6410 board
with mmci host driver.

mmci-pl18x 12400000.sdcc: error during DMA transfer!
Unable to handle kernel paging request at virtual address 40000000
pgd = c0204000
[40000000] *pgd=00000000
Internal error: Oops: 805 [#1] SMP ARM
Modules linked in: ipv6 ath6kl_sdio ath6kl_core
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W      3.17.0-rc7-linaro-multi-v7 #1
task: c0c9d7e0 ti: c0c92000 task.ti: c0c92000
PC is at v7_dma_inv_range+0x34/0x4c
LR is at __dma_page_dev_to_cpu+0x80/0x100
pc : [<c021efc0>]    lr : [<c021af18>]    psr: 400f0193
sp : c0c93e20  ip : c0c9a478  fp : c08ea538
r10: c0c9f548  r9 : 00000002  r8 : e97d9000
r7 : 00000200  r6 : c0c9d504  r5 : c0db0880  r4 : 00000000
r3 : 0000003f  r2 : 00000040  r1 : 40000200  r0 : 40000000
Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5787d  Table: a9ef406a  DAC: 00000015
Process swapper/0 (pid: 0, stack limit = 0xc0c92250)
Stack: (0xc0c93e20 to 0xc0c94000)
3e20: c021f058 e9a17178 e9a171bc e99dfd6c 00000001 00000001 e995de10 00000002
3e40: 00000000 c021b574 00000000 c04bc4a4 00000000 e9b49ac0 c0ce6e6c e99dfda4
3e60: 00000088 e9810780 c0d8291c c072ea58 00000000 c072d3fc 00000000 c072f534
3e80: 00000000 e9b49ac0 00000100 c0c9a444 00000088 c072f6b4 c072f5d4 e9d40080
3ea0: e98107dc 00000000 00000000 c0280a60 00000000 7d55bf61 e9810780 e98107dc
3ec0: 00000000 f0002000 c0d460e8 c0d460e8 c0c92000 c0280b60 e9810780 c0ce7190
3ee0: 00000000 c028369c c02835f4 00000088 00000088 c0280278 c0c8ec70 c020f080
3f00: f000200c c0c9a958 c0c93f28 c02088e4 c04bd630 c04bd5bc 200f0013 ffffffff
3f20: c0c93f5c c0212800 00000001 a987c000 c0c93f3c c04bd574 00000000 0000015b
3f40: ea7a0e40 00000000 c0d460e8 c0d460e8 c0c92000 c08ea538 29b12000 c0c93f70
3f60: c04bd630 c04bd5bc 200f0013 ffffffff c04bd574 c071bd24 7d50c9b4 c0719a44
3f80: 7d50c9b4 0000015b c0c9a498 c0c92028 c0c9a498 c0c9a4fc ea7a0e40 c0c8ee38
3fa0: c0d460e8 c0276198 00000000 c0d8291a 00000000 c0c9a400 00000000 c0be0bc4
3fc0: ffffffff ffffffff c0be05f8 00000000 00000000 c0c533d8 c0d82ed4 c0c9a47c
3fe0: c0c533d4 c0c9e870 8020406a 511f06f0 00000000 80208074 00000000 00000000
[<c021efc0>] (v7_dma_inv_range) from [<c021af18>] (__dma_page_dev_to_cpu+0x80/0x100)
[<c021af18>] (__dma_page_dev_to_cpu) from [<c021b574>] (arm_dma_unmap_sg+0x5c/0x84)
[<c021b574>] (arm_dma_unmap_sg) from [<c072ea58>] (mmci_dma_unmap.isra.16+0x60/0x74)
[<c072ea58>] (mmci_dma_unmap.isra.16) from [<c072f534>] (mmci_data_irq+0x1fc/0x29c)
[<c072f534>] (mmci_data_irq) from [<c072f6b4>] (mmci_irq+0xe0/0x114)
[<c072f6b4>] (mmci_irq) from [<c0280a60>] (handle_irq_event_percpu+0x78/0x134)
[<c0280a60>] (handle_irq_event_percpu) from [<c0280b60>] (handle_irq_event+0x44/0x64)
[<c0280b60>] (handle_irq_event) from [<c028369c>] (handle_fasteoi_irq+0xa8/0x1a8)
[<c028369c>] (handle_fasteoi_irq) from [<c0280278>] (generic_handle_irq+0x2c/0x3c)
[<c0280278>] (generic_handle_irq) from [<c020f080>] (handle_IRQ+0x40/0x90)
[<c020f080>] (handle_IRQ) from [<c02088e4>] (gic_handle_irq+0x38/0x68)
[<c02088e4>] (gic_handle_irq) from [<c0212800>] (__irq_svc+0x40/0x54)
Exception stack(0xc0c93f28 to 0xc0c93f70)
3f20:                   00000001 a987c000 c0c93f3c c04bd574 00000000 0000015b
3f40: ea7a0e40 00000000 c0d460e8 c0d460e8 c0c92000 c08ea538 29b12000 c0c93f70
3f60: c04bd630 c04bd5bc 200f0013 ffffffff
[<c0212800>] (__irq_svc) from [<c04bd5bc>] (msm_cpu_pm_enter_sleep+0x48/0x4c)
[<c04bd5bc>] (msm_cpu_pm_enter_sleep) from [<c071bd24>] (qcom_lpm_enter_spc+0x20/0x2c)
[<c071bd24>] (qcom_lpm_enter_spc) from [<c0719a44>] (cpuidle_enter_state+0x44/0xf0)
[<c0719a44>] (cpuidle_enter_state) from [<c0276198>] (cpu_startup_entry+0x1f4/0x238)
[<c0276198>] (cpu_startup_entry) from [<c0be0bc4>] (start_kernel+0x384/0x390)
Code: 1e070f3e e1110003 e1c11003 1e071f3e (ee070f36)
---[ end trace cf6cb3f6432c9834 ]---
Kernel panic - not syncing: Fatal exception in interrupt

Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10 12:40:28 +01:00
..
Kconfig mmc: core: Use MMC_UNSAFE_RESUME as default behavior 2014-02-13 22:58:15 -05:00
Makefile mmc: extend and rename cd-gpio helpers to handle more slot GPIO functions 2012-07-10 23:04:04 -04:00
bus.c mmc: core: Remove redundant runtime_idle callback 2014-07-09 11:25:58 +02:00
bus.h mmc: rename dev_to_mmc_card() to mmc_dev_to_card() 2010-10-23 21:11:12 +08:00
core.c mmc: core: fix prepared requests while doing bkops 2014-11-10 12:40:28 +01:00
core.h mmc: core: Let mmc_set_signal_voltage take ocr as parameter 2013-10-30 20:26:26 -04:00
debugfs.c mmc: add support for HS400 mode of eMMC5.0 2014-05-12 18:06:06 -04:00
host.c mmc: core: fix card detection regression 2014-11-05 09:28:48 +01:00
host.h mmc: start removing enable / disable API 2012-03-27 12:20:03 -04:00
mmc.c mmc: core: Fix error paths and messages in mmc_init_card 2014-11-10 12:40:28 +01:00
mmc_ops.c mmc: Convert pr_warning to pr_warn 2014-09-24 10:13:09 +02:00
mmc_ops.h mmc: implement Driver Stage Register handling 2014-09-09 13:59:07 +02:00
quirks.c mmc: quirks: Fixup debug message 2014-07-09 11:26:03 +02:00
sd.c mmc: Convert pr_warning to pr_warn 2014-09-24 10:13:09 +02:00
sd.h mmc: drop the speed mode of card's state 2014-05-12 18:05:53 -04:00
sd_ops.c mmc: sd: warn if card stays busy during init 2014-07-09 11:26:07 +02:00
sd_ops.h mmc: add erase, secure erase, trim and secure trim operations 2010-08-12 08:43:30 -07:00
sdio.c mmc: Convert pr_warning to pr_warn 2014-09-24 10:13:09 +02:00
sdio_bus.c MMC core: 2014-10-11 06:34:22 -04:00
sdio_bus.h mmc: basic SDIO device model 2007-09-23 19:45:31 +02:00
sdio_cis.c mmc: sdio: Change pr_warning to pr_warn_ratelimited 2012-07-22 15:25:48 -04:00
sdio_cis.h sdio: split up common and function CIS parsing 2007-09-23 20:44:22 +02:00
sdio_io.c mmc: sdio: Use multiple scatter/gather list 2012-12-06 13:54:43 -05:00
sdio_irq.c mmc: Convert pr_warning to pr_warn 2014-09-24 10:13:09 +02:00
sdio_ops.c mmc: sdio: Use multiple scatter/gather list 2012-12-06 13:54:43 -05:00
sdio_ops.h sdio: recognize io card without powercycle 2010-03-12 15:52:28 -08:00
slot-gpio.c mmc: core: restore detect line inversion semantics 2014-10-02 11:51:26 +02:00