adapt test-ci build target for buildd

* run tests with ./node
* remove addons from test-ci suite, because it creates a dependency loop
  nodejs -> node-gyp -> nodejs which is painful to manage.
* disabled because it requires stdin:
  + test-stdout-close-unref
  + test-regress-GH-746
* test-tick-processor fails on ppc64 and s390x, currently investigated
  https://github.com/nodejs/node/issues/2471
* test-cluster-disconnect sometimes fails on busy buildd, forwarded upstream
  https://github.com/nodejs/node/issues/3383
* test-fs-watch is flaky, might be related to https://github.com/nodejs/node/issues/4082
* huge timeout value for all platforms, buildd could be busy
* test-npm-install and test-release-npm must fail, debian package dfsg-repacked npm out
* ability to override CI_NATIVE_SUITES, CI_JS_SUITES
* disable tests failing because DNS is disabled
* sequential/test-http2-session-timeout is flaky https://github.com/nodejs/node/issues/20628
Forwarded: not-needed
Reviewed-By: Xavier Guimard <yadd@debian.org>
Last-Update: 2020-02-09

Gbp-Pq: Name test_ci_buildd.patch

Makefile

@@ -508,7 +508,7 @@ test-ci-native: | benchmark/napi/.buildstamp test/addons/.buildstamp test/js-nat
 # This target should not use a native compiler at all
 # Related CI job: node-test-commit-arm-fanned
 test-ci-js: | clear-stalled
-	$(PYTHON) tools/test.py $(PARALLEL_ARGS) -p tap --logfile test.tap \
+	$(PYTHON) tools/test.py $(PARALLEL_ARGS) -p tap \
 		--mode=$(BUILDTYPE_LOWER) --flaky-tests=$(FLAKY_TESTS) \
 		$(TEST_CI_ARGS) $(CI_JS_SUITES)
 	@echo "Clean up any leftover processes, error if found."

test/common/index.js

@@ -235,27 +235,7 @@ const pwdCommand = isWindows ?
 
 
 function platformTimeout(ms) {
-  const multipliers = typeof ms === 'bigint' ?
-    { two: 2n, four: 4n, seven: 7n } : { two: 2, four: 4, seven: 7 };
-
-  if (process.features.debug)
-    ms = multipliers.two * ms;
-
-  if (isAIX)
-    return multipliers.two * ms; // Default localhost speed is slower on AIX
-
-  if (process.arch !== 'arm')
-    return ms;
-
-  const armv = process.config.variables.arm_version;
-
-  if (armv === '6')
-    return multipliers.seven * ms;  // ARMv6
-
-  if (armv === '7')
-    return multipliers.two * ms;  // ARMv7
-
-  return ms; // ARMv8+
+	return 20 * ms; // for debian build servers
 }
 
 let knownGlobals = [

test/parallel/parallel.status

@@ -6,6 +6,37 @@ prefix parallel
 
 [true] # This section applies to all platforms
 
+test-process-config                  : PASS,FLAKY
+test-regress-GH-746                  : PASS,FLAKY
+test-stdout-close-unref              : PASS,FLAKY
+test-npm-install                     : FAIL
+test-npm-version                     : FAIL
+test-release-npm                     : FAIL
+# skip tests accessing network
+test-dns                             : SKIP
+test-net-connect-immediate-finish    : SKIP
+test-net-better-error-messages-port-hostname : SKIP
+
+# in debian build env, skip because it somehow tries to access network
+test-https-connect-address-family : SKIP 
+test-tls-connect-address-family : SKIP
+test-dns-cancel-reverse-lookup: SKIP
+
+# https://bugs.debian.org/919588
+## flaky on some user environments
+test-net-listen-after-destroying-stdin: PASS,FLAKY
+## fails when running with eatmydata
+test-fs-error-messages: PASS,FLAKY
+
+# should have been disabled 'cause openssl 1.1.0
+test-tls-ecdh-disable : SKIP
+
+# only works with zlib >= 1.2.11
+test-zlib-failed-init: SKIP
+
+# might fail, see https://github.com/nodejs/node/issues/17909
+test-fs-utimes: PASS,FLAKY
+
 [$system==win32]
 # https://github.com/nodejs/node/issues/20750
 test-http2-client-upload: PASS,FLAKY
@@ -39,6 +70,10 @@ test-crypto-keygen: SKIP
 # https://github.com/nodejs/node/issues/33796
 test-fs-stream-construct: PASS,FLAKY
 
+[$arch==mips64el]
+# the debug flag is for hacking v8 internals
+test-debug-args: PASS,FLAKY
+
 [$system==solaris] # Also applies to SmartOS
 
 [$system==freebsd]
@@ -71,3 +106,6 @@ test-net-write-after-end-nt: SKIP
 test-tls-env-extra-ca: SKIP
 # https://github.com/nodejs/node/pull/34209
 test-dgram-error-message-address: SKIP
+
+[$arch==mipsel]
+test-inspect-async-hook-setup-at-inspect: SKIP

test/sequential/sequential.status

@@ -8,6 +8,15 @@ prefix sequential
 # https://github.com/nodejs/node/issues/27611#issuecomment-613100468
 test-cpu-prof-dir-worker: PASS, FLAKY
 
+# flaky or failing at least on debian build servers
+test-fs-watch                                   : PASS,FLAKY
+test-force-repl                                 : SKIP
+test-performance                                : SKIP
+test-http2-session-timeout                      : PASS,FLAKY
+
+# https://github.com/nodejs/node/issues/24403
+test-cli-syntax: PASS,FLAKY
+
 [$system==win32]
 # https://github.com/nodejs/node/issues/22327
 test-http2-large-file: PASS, FLAKY
@@ -35,3 +44,10 @@ test-perf-hooks: SKIP
 [$arch==arm]
 # https://github.com/nodejs/node/issues/26401#issuecomment-613095719
 test-worker-prof: PASS, FLAKY
+
+[$arch==mipsel]
+test-inspector-async-hook-setup-at-inspect-brk: SKIP
+test-inspector-async-hook-setup-at-signal: SKIP
+test-inspector-async-stack-traces-set-interval: SKIP
+
+

tools/test.py

@@ -890,25 +890,7 @@ class Context(object):
     self.node_has_crypto = True
 
   def GetVm(self, arch, mode):
-    if self.vm is not None:
-      return self.vm
-    if arch == 'none':
-      name = 'out/Debug/node' if mode == 'debug' else 'out/Release/node'
-    else:
-      name = 'out/%s.%s/node' % (arch, mode)
-
-    # Currently GYP does not support output_dir for MSVS.
-    # http://code.google.com/p/gyp/issues/detail?id=40
-    # It will put the builds into Release/node.exe or Debug/node.exe
-    if utils.IsWindows():
-      if not exists(name + '.exe'):
-        name = name.replace('out/', '')
-      name = os.path.abspath(name + '.exe')
-
-    if not exists(name):
-      raise ValueError('Could not find executable. Should be ' + name)
-
-    return name
+    return './node'
 
   def GetTimeout(self, mode):
     return self.timeout * TIMEOUT_SCALEFACTOR[ARCH_GUESS or 'ia32'][mode]