Using $(BUILD_NUMBER) inside a rule causes odd behavior, as the rule
is different every time make is run, but since make doesn't depend
on the command line it only ends up being built with the new value
if some other dependency has changed.
To allow ninja, which does depend on the command line, to provide the
same behavior, store the build number in out/build_number.txt, and
use a shell expansion to cat the file in rules that use it. This will
cause the rule command to stay identical between builds, while still
getting the new build number if the rule is rerun for a dependency.
Also use the same trick for BUILD_FINGERPRINT, and the date in
droiddoc rules.
Change-Id: I6c5e6b6b3ef4c613563d7f5604df0e401575ba5f
file_contexts (specified by SELINUX_FC) is needed both when building
and (re)packaging. We used to use the copy in out/ when building, and
looked for the copy in BOOT/RAMDISK/ when packaging from target_files
zip. With system_root_image enabled, the file_contexts needed for
building and packaging might be different from the one on device. So
we explicitly pack the file as META/file_contexts in target_files zip.
Also refactor out the overriding of selinux_fc property into
common.LoadInfoDict().
Change-Id: I94f9ea6671b3792c12c1c21573840743d63da39a
(cherry picked from commit aa7318c384)
Due to the change in https://lwn.net/Articles/546473/, kernel reserves a
few extra blocks (lesser of 2% and 4096 blocks) on ext4 FS which leads to
OTA update failures. Adjust the size computation if the device has
BOARD_HAS_EXT4_RESERVED_BLOCKS := true.
It amends the last attemp in [1]. Now it computes the used blocks from the
make_ext4fs output, instead of altering its argument.
[1]: commit efbb5d2e69.
Bug: 21522719
Bug: 22023465
Bug: 22174684
Change-Id: Iaae6507f6de68a5892f2e3035d330039287b4492
(cherry picked from commit c7a6f1e4f8)
shamu has a 560dpi density, which is between xxhdpi and xxxhdpi. It
deserves the large font (18x32), otherwise it falls back to use the
small one and makes it mostly unreadable under recovery mode. Amend
the list to include 560dpi and 400dpi that are higher than xhdpi.
Ideally we should map string formats back to numbers for easy
comparison (and to handle any high but odd density values).
Change-Id: Ie08d9ce5e1c8850ff30a79bcbfd1b89e971b7e07
With this, you can easily add more executables, jars or shared libraries
to the package. Also now it automatically takes care of
32-bit-v.s.-64-bit library issue.
Change-Id: I5afe00fadc978d0da229b192eca1a4b1c149764e
Add vboot properties to the dictionary file, which will be packed into
the target_files zip. Add support in packaging and OTA scripts to
sign the generated bootable images (boot.img and recovery.img) when
vboot is enabled.
Change-Id: I08758ced03d173219415bca762bbdb66c464a9f5
(cherry picked from commit 5d5a3bd9e8d8b14b71d1b2105417a2958d13d3d2)
Added support to build system.img that combines contents of /system and
the ramdisk, and can be mounted at the root of the file system.
To enable this feature, define BoardConfig.mk variable:
BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
Ideally we would just change TARGET_OUT (the path of the staging system
directory) to under TARGET_ROOT_OUT. But at this point many places in
the build system assume TARGET_OUT is independent of TARGET_ROOT_OUT and
we can't make it easily configurable.
Instead this implementation takes the least intrusive approach:
We don't change TARGET_OUT or TARGET_ROOT_OUT. We just assemble a
temporary staging directory that contains contents of both TARGET_OUT
and TARGET_ROOT_OUT, in build_image.BuildImage() of
tools/releasetools/build_image.py.
When build_image.py is directly called from the makefile, we pass in the
parameters from the global dictionary; when build_image.BuildImage() is
called from add_img_to_target_files.py, we need to override values to
point to files extracted from the target_files zip file.
We need to combine the fs_config files of both /system and ramdisk,
when fs_config is enabled.
Also this change refactored build_image.BuildImage() by moving the extra
parameters to the image property dictionary.
(cherry-picked from commit 0eabd4f2c5)
Bug:19868522
Change-Id: Iafc467a0e3427b0d6ad3b575abcc98ddcc9ea0f1
The change follows the patten found in "Package OTA" and other places
to allow for overriding the mkbootimg command.
Now pass MKBOOTIMG variable to get make_recovery_patch and add_image_to_target
to use the tool set in BOARD_CUSTOM_MKBOOTIMG for boot/recovery image
generation.
Change-Id: I78533c25e87c2750eb24ac1bf39e4b7ca321a441
Some releasetools python sripts rely on $PATH to search for the
executables. With this change, you don't need to run lunch even after you
change the build system variable OUT_DIR.
Bug: 19320328
Change-Id: Ia44b11084fb1bdcceb60b1d33cb7e460c9b705a8
(cherry picked from commit 9d252e1009)
Add a target to zip up all the otatools and releasetools, for easy
copying to the OTA builder machine.
Change-Id: If14b4afefcc1a20ea19dfca3f3b9f9fae73189a6
(cherry picked from commit f22b0f43ef)
"cp -Rf" fails on Mac OS when some broken symlinks exist in the dest
dir.
Also switch to better shell error handling when copying
init.recovery.*.rc.
Change-Id: Idd05f7604736b234619f62be12dd108fac91fed1
Previously the recovery binary was configured to be installed to the
system.img and then got copied to recovery.img in the recovery.img's
build rule.
With this change, a module, such as the recovery binary, can configure
itself to be installed directly to the recovery.img, just like how other
modules get installed to system.img.
Bug: 19667686
Change-Id: I46b0b4a95cf078a68999db9c0f6635d6a3f5cd86
Add source and target block hashes as parameters to transfer list
commands that copy or patch data to a partition. This allows the
updater to verify the status of each command in the transfer list
and makes resuming block based OTAs possible. Due to the changes,
update the transfer list version to 3.
Needs matching changes from
I1e752464134aeb2d396946348e6041acabe13942
Bug: 18262110
Change-Id: Ia5c56379f570047f10f0aa7373a1025439495c98
(cherry picked from commit cac671a9d1)
Previously if user has a directory with name dummy in the root of the
source tree, "zip -qd package.apk dummy" fails with:
"zip error: Nothing to do!".
This change mitigates the error.
Change-Id: I642e3bf0378e5b9911a068ecb72f795b3e92f1fe
We don't use EXT2 for bootimage anymore.
This will allow getting rid of external/genext2fs
Bug: 19282953
Change-Id: Ie56528c7877036d2501a09888a4420637f9cd647
When incremental builds only affect the system partition,
the build.prop file for other partitions might go out of
date.
Add a dependency on system/build.prop s.t. when
it's rebuilt,
the fingerprints are updated on the other
partition's build.prop's.
Bug:19058575
Change-Id: Iea7b761e0800c402eb4ce1154e8f6af5a17f7b06
Colin Cross