For the envsetup.sh variables that should not be used in makefiles
(since they're not explicitly set up, and won't be available on the
build servers), mark them as deprecated.
Rework our documentation to have a landing page, and create a "Changes"
section where we can record changes like these. At some point I may go
and backfill some recent work.
Test: build/soong/build_test.bash
Change-Id: I54b9294ddf270245afdb58d17150db8098584e8a
Use jacoco values exported from soong and copy
jacoco-report-classes.jar to where the jacoco-report-classes-all.jar
rule can find it.
Bug: 69629238
Test: m EMMA_INSTRUMENT=true EMMA_INSTRUMENT_FRAMEWORK=true SKIP_BOOT_JARS_CHECK=true WITH_DEXPREOPT=false
Change-Id: If05381f415fb52a575746b8be0bfcd03d55b2153
I064889c9063b642835d9f668e2568b61d0fabe35 added LOCAL_SRCJARS but
forgot to clear it in clear_vars.mk.
Test: m checkbuild
Change-Id: I7d4e6a3821db0eccb25042091aa599cab381a1b0
Add explicit arguments that will abort boot image compilation when
a class is found that fails compile-time verification.
This allows certain configurations to disable these checks.
WARNING: Disabling the checks is highly discouraged.
Bug: 69106371
Test: m
Change-Id: I63e915005fcda588b223ec60ef8c9db28d42e577
Jack supported '?' and '*' wildcards anywhere in a filter. Tighten
the restrictions to only support '*' at the end of a filter, and
to disallow '?'. This will allow jacoco support to be built on
top of the existing zip2zip tools.
Add checks that all filters meet the new requirements, and run
the checks outside the LOCAL_EMMA_INSTRUMENT==true check so that
mistakes can be caught without having to run a build with
coverage enabled.
Bug: 69629238
Test: m EMMA_INSTRUMENT=true EMMA_INSTRUMENT_STATIC=true
Test: m in internal master
Test: https://android-build.googleplex.com/builds/view-workplan?viewType=Table&workplanId=L67200000122054710&nodeType=Trybot
Change-Id: Ib78bd3c8685fbc6bdcdb517df874186efd1cff33
This CL repoints static dependencies to their .cfi variants for CFI
enabled targets. It also disables CFI for host targets because the
version of ar intended for hosts does not have plugin support (which
CFI requires).
Bug: 67507323
Test: m -j40
Change-Id: Id11afd0c8765469858f406aace2a192afff6d042
$(basename) was catching all of the hidl services that have versions
like "1.0" in their name, marking the .0-service portion as a suffix to
be removed.
Instead just remove ".so" and assume that everything else isn't actually
a suffix.
Bug: 69271974
Test: NATIVE_COVERAGE=true COVERAGE_PATHS=hardware/interfaces m; compare
ninja files
Change-Id: I76e27d9ab1f9d4862cc2607c5f2ed9c121879421
partition_tag is now set to either VENDOR_, OEM_, or ODM_
even when LOCAL_[VENDOR|OEM|ODM]_MODULE isn't set but LOCAL_MODULE_PATH
is explicitly set to under $(TARGET_OUT_[VENDOR|OEM|ODM]).
Test: build walleye
Change-Id: I0f902061889fe0af1c39f6222e54faa80dd15794
Define a new phony target 'vndk' such that 'make vndk dist'
outputs VNDK snapshot zip file to DIST_DIR.
Bug: 66059995
Test: m -j vndk dist TARGET_PRODUCT=aosp_{arch}_{a, ab}
BOARD_VNDK_VERSION=current
Change-Id: I6fd763a91205b21fba414d1f3068408a6826fad8
So that they can be updated more regularly than prebuilts/sdk/tools.
Bug: 69431993
Test: tapas ExactCalculator; m
Change-Id: Id07ab43f9d9e0c794cc15f21b75ae88c3547d8bd
This allows modules to specify that they may only be used from modules
using aapt2. Using aapt2 removes absolute path references to modules, so
this can be useful if a module is preparing to move its sources, or
replace itself with a prebuilt aar.
Test: m
Test: Label frameworks/support/design; m
Test: Label frameworks/support/v4; m
Test: build/soong/build_test.bash
Change-Id: Icfb3d4b19a6a0e3a3bb00091d2a97a4d88c0c761
* Skip Android.bp, prebuilt, and HEADER_LIBRARIES targets.
* If neither -Wno-error nor -Werror is used, add default -Wall -Werror.
However, if the build target is in a project
under one of ANDROID_WARNING_ALLOWED_PROJECTS, add only -Wall.
* Dump name of modules using -Wno-error or added -Wall -Werror
into file $(PRODUCT_OUT)/wall_werror.txt.
Bug: 66996870
Test: normal build
Change-Id: Ief8cf776e8613ed073a64dd271534688845d5c2c
Package gpl_source.tgz directly into the dist directory (which is
always removed between build server builds) so that FORCE is not
needed. This prevents the build system from seeing a dirty rule
at the end of a make checkbuild dist.
Bug: 68062417
Test: m checkbuild dist
Change-Id: I4a9d9deb1611cc9ba266e8c1ac086a7ef48061c4
This makes the following readonly if they are defined:
- PRODUCT_FULL_TREBLE_OVERRIDE
- Linker/sepolicy/vintf overrides for PRODUCT_FULL_TREBLE
Test: multiproduct_kati
Change-Id: Ib33e2e23b74a049e87667358bed331f86e517837
This change fixes the following warning message:
WARNING: out/target/product/$(TARGET_DEVICE)/boot.img approaching \
size limit (33554432 now; limit 33554432)
This is because AVB signing will increase boot.img to
BOARD_BOOTIMAGE_PARTITION_SIZE, in order to place the AVB metadata at
the end of the partition. We should check max image size first then use
avbtool to sign it.
The max allowed size will be (partition size - AVB_HASH_META_SIZE) when
AVB is enabled.
Bug: 69115400
Test: build and checks there is no size limit warning message
Change-Id: If9545e64a0d1714a2ec2440f9bd38293e7b1ba9a
This CL topic breaks the single flag value EXPERIMENTAL_USE_OPENJDK9
into two flags USE_OPENJDK9 and TARGET_OPENJDK9 which are computed
independently in config.mk and config.go; this means that later
build logic no longer depends on / duplicates the semantics of an
unset EXPERIMENTAL_USE_OPENJDK9, because that later build logic
can use USE_OPENJDK9 and TARGET_OPENJDK9 instead. Thus, it becomes
slightly easier to change this default in future CLs (touching
only config.mk and config.go).
It also makes it more straightforward to convert .mk files
to .bp.
This CL also introduces a new allowed value "false" for
EXPERIMENTAL_USE_OPENJDK9. This fourth possible value currently
has the same semantics as a default/unset
EXPERIMENTAL_USE_OPENJDK9, but allows people to explicitly
switch back to the old semantics when the default changes.
Test: make showcommands core-oj (in environments with
EXPERIMENTAL_USE_OPENJDK9 set to "", "1.8", and "true").
Bug: 38177295
Change-Id: Iaade9610b237722e5d175143808b8653b1e98996
Soong generates the R.java for framework-res.apk to a srcjar.
Droiddoc will need to consume them, so add support to the droiddoc
rules for extracting sources from a srcjar.
Test: m checkbuild
Change-Id: I064889c9063b642835d9f668e2568b61d0fabe35
my_generated_res_dirs wasn't being reset in some cases in between
different modules. To be safe, clear every input variable that I was sure
was not being used by the caller after aapt2.mk.
Test: m
Test: m ANDROID_BUILDSPEC=vendor/google/build/app_build_spec.mk
Change-Id: I37c861d99637cad77a2a378a119bf66cee373b3a
We don't have great alternatives for some of these use cases, so for now
just silence them, writing them to $OUT/product_copy_files_ignored.txt
(and if `dist' is specified, $DIST_DIR/logs/product_copy_files_ignored.txt)
Test: lunch aosp_arm-userdebug; m nothing
Test: lunch aosp_arm-userdebug; m dist
Change-Id: If0228bc8d907346e3505ae136cb477ef37a5c867
When some of the full treble requirements are turned off,
PROUCT_FULL_TREBLE became false, which in turn cleared macro variables
guarded in treble: {cflags: "..."}.
Until when Soong recognizes each of the requirements (e.g.
treble_sepolicy: { }), don't reset PRODUCT_FULL_TREBLE to false
even when some of the requirements are not met.
Bug: 62019611
Bug: 68710251
Test: get_build_var PRODUCT_FULL_TREBLE returns true for aosp_walleye
Test: aosp_walleye boots to the UI
Change-Id: Iad3ee4f4462c82e9f9e1897f3ec019cdd16da358
PRODUCT_SEPOLICY_SPLIT
PRODUCT_TREBLE_LINKER_NAMESPACES
PRODUCT_ENFORCE_VINTF_MANIFEST
Being able to selectively toggle these does several things:
- it's better software engineering (no longer conflating vars)
- easier bringup for devices.
- devices which don't require full Treble can opt out of only
parts of it and still get the benefits of others.
Bug: 62019611
Test: manual
Merged-In: I728e32869baf043ae9a54e83e513fb99e560c827
Change-Id: I728e32869baf043ae9a54e83e513fb99e560c827
With the update of brotli to version 1.0.1 the new binary tool is now
called "brotli". This patch updates the scripts to use the new name.
Bug: 34220646
Test: `make dist`; ota_from_target_files on non-A/B device.
Change-Id: Ie8da4333388d029d5960a723a55efd875d8ee820
checkvintf will be used to verify compatibility of OTA packages.
Bug: 68327258
Test: `m -j dist` and inspect archive for checkvintf
Change-Id: I1d4cfcff537a03adee28d1e6ba9403a2e1635fe0
Treehugger Robot