openkylin
/
platform_build
mirror of https://gitee.com/openkylin/platform_build.git
9
0
Fork 1
Code Issues Projects Releases Wiki Activity
platform_build/core/cleanbuild.mk

324 lines
12 KiB
Makefile
Raw Blame History

# Copyright (C) 2007 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Don't bother with the cleanspecs if you are running mm/mmm
ifeq ($(ONE_SHOT_MAKEFILE)$(dont_bother),)
INTERNAL_CLEAN_STEPS :=
# Builds up a list of clean steps. Creates a unique
# id for each step by taking makefile path, INTERNAL_CLEAN_BUILD_VERSION
# and appending an increasing number of '@' characters.
#
# $(1): shell command to run
# $(2): indicate to not use makefile path as part of step id if not empty.
# $(2) should only be used in build/core/cleanspec.mk: just for compatibility.
define _add-clean-step
$(if $(strip $(INTERNAL_CLEAN_BUILD_VERSION)),, \
$(error INTERNAL_CLEAN_BUILD_VERSION not set))
$(eval _acs_makefile_prefix := $(lastword $(MAKEFILE_LIST)))
$(eval _acs_makefile_prefix := $(subst /,_,$(_acs_makefile_prefix)))
$(eval _acs_makefile_prefix := $(subst .,-,$(_acs_makefile_prefix)))
$(eval _acs_makefile_prefix := $(_acs_makefile_prefix)_acs)
$(if $($(_acs_makefile_prefix)),,\
$(eval $(_acs_makefile_prefix) := $(INTERNAL_CLEAN_BUILD_VERSION)))
$(eval $(_acs_makefile_prefix) := $($(_acs_makefile_prefix))@)
$(if $(strip $(2)),$(eval _acs_id := $($(_acs_makefile_prefix))),\
$(eval _acs_id := $(_acs_makefile_prefix)$($(_acs_makefile_prefix))))
$(eval INTERNAL_CLEAN_STEPS += $(_acs_id))
$(eval INTERNAL_CLEAN_STEP.$(_acs_id) := $(1))
$(eval _acs_id :=)
$(eval _acs_makefile_prefix :=)
endef
define add-clean-step
$(eval # for build/core/cleanspec.mk, dont use makefile path as part of step id) \
$(if $(filter %/cleanspec.mk,$(lastword $(MAKEFILE_LIST))),\
$(eval $(call _add-clean-step,$(1),true)),\
$(eval $(call _add-clean-step,$(1))))
endef
# Defines INTERNAL_CLEAN_BUILD_VERSION and the individual clean steps.
# cleanspec.mk is outside of the core directory so that more people
# can have permission to touch it.
include $(BUILD_SYSTEM)/cleanspec.mk
INTERNAL_CLEAN_BUILD_VERSION := $(strip $(INTERNAL_CLEAN_BUILD_VERSION))
INTERNAL_CLEAN_STEPS := $(strip $(INTERNAL_CLEAN_STEPS))
# If the clean_steps.mk file is missing (usually after a clean build)
# then we won't do anything.
CURRENT_CLEAN_BUILD_VERSION := $(INTERNAL_CLEAN_BUILD_VERSION)
CURRENT_CLEAN_STEPS := $(INTERNAL_CLEAN_STEPS)
# Read the current state from the file, if present.
# Will set CURRENT_CLEAN_BUILD_VERSION and CURRENT_CLEAN_STEPS.
#
clean_steps_file := $(PRODUCT_OUT)/clean_steps.mk
-include $(clean_steps_file)
ifneq ($(CURRENT_CLEAN_BUILD_VERSION),$(INTERNAL_CLEAN_BUILD_VERSION))
# The major clean version is out-of-date. Do a full clean, and
# don't even bother with the clean steps.
$(info *** A clean build is required because of a recent change.)
$(shell rm -rf $(OUT_DIR))
$(info *** Done with the cleaning, now starting the real build.)
else
# The major clean version is correct. Find the list of clean steps
# that we need to execute to get up-to-date.
steps := \
$(filter-out $(CURRENT_CLEAN_STEPS),$(INTERNAL_CLEAN_STEPS))
$(foreach step,$(steps), \
$(info Clean step: $(INTERNAL_CLEAN_STEP.$(step))) \
$(shell $(INTERNAL_CLEAN_STEP.$(step))) \
)
# Rewrite the clean step for the second arch.
ifdef TARGET_2ND_ARCH
# $(1): the clean step cmd
# $(2): the prefix to search for
# $(3): the prefix to replace with
define -cs-rewrite-cleanstep
$(if $(filter $(2)/%,$(1)),\
$(eval _crs_new_cmd := $(patsubst $(2)/%,$(3)/%,$(1)))\
$(info Clean step: $(_crs_new_cmd))\
$(shell $(_crs_new_cmd)))
endef
$(foreach step,$(steps), \
$(call -cs-rewrite-cleanstep,$(INTERNAL_CLEAN_STEP.$(step)),$(TARGET_OUT_INTERMEDIATES),$($(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATES))\
$(call -cs-rewrite-cleanstep,$(INTERNAL_CLEAN_STEP.$(step)),$(TARGET_OUT_SHARED_LIBRARIES),$($(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_SHARED_LIBRARIES))\
$(call -cs-rewrite-cleanstep,$(INTERNAL_CLEAN_STEP.$(step)),$(TARGET_OUT_VENDOR_SHARED_LIBRARIES),$($(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_VENDOR_SHARED_LIBRARIES))\
$(call -cs-rewrite-cleanstep,$(INTERNAL_CLEAN_STEP.$(step)),$($(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATES),$(TARGET_OUT_INTERMEDIATES))\
$(call -cs-rewrite-cleanstep,$(INTERNAL_CLEAN_STEP.$(step)),$($(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_SHARED_LIBRARIES),$(TARGET_OUT_SHARED_LIBRARIES))\
$(call -cs-rewrite-cleanstep,$(INTERNAL_CLEAN_STEP.$(step)),$($(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_VENDOR_SHARED_LIBRARIES),$(TARGET_OUT_VENDOR_SHARED_LIBRARIES))\
)
endif
_crs_new_cmd :=
steps :=
endif
# Write the new state to the file.
#
rewrite_clean_steps_file :=
ifneq ($(CURRENT_CLEAN_BUILD_VERSION)-$(CURRENT_CLEAN_STEPS),$(INTERNAL_CLEAN_BUILD_VERSION)-$(INTERNAL_CLEAN_STEPS))
rewrite_clean_steps_file := true
endif
ifeq ($(wildcard $(clean_steps_file)),)
# This is the first build.
rewrite_clean_steps_file := true
endif
ifeq ($(rewrite_clean_steps_file),true)
$(shell \
mkdir -p $(dir $(clean_steps_file)) && \
echo "CURRENT_CLEAN_BUILD_VERSION := $(INTERNAL_CLEAN_BUILD_VERSION)" > \
$(clean_steps_file) ;\
echo "CURRENT_CLEAN_STEPS := $(wordlist 1,500,$(INTERNAL_CLEAN_STEPS))" >> $(clean_steps_file) \
)
define -cs-write-clean-steps-if-arg1-not-empty
$(if $(1),$(shell echo "CURRENT_CLEAN_STEPS += $(1)" >> $(clean_steps_file)))
endef
$(call -cs-write-clean-steps-if-arg1-not-empty,$(wordlist 501,1000,$(INTERNAL_CLEAN_STEPS)))
$(call -cs-write-clean-steps-if-arg1-not-empty,$(wordlist 1001,1500,$(INTERNAL_CLEAN_STEPS)))
$(call -cs-write-clean-steps-if-arg1-not-empty,$(wordlist 1501,2000,$(INTERNAL_CLEAN_STEPS)))
$(call -cs-write-clean-steps-if-arg1-not-empty,$(wordlist 2001,2500,$(INTERNAL_CLEAN_STEPS)))
$(call -cs-write-clean-steps-if-arg1-not-empty,$(wordlist 2501,3000,$(INTERNAL_CLEAN_STEPS)))
$(call -cs-write-clean-steps-if-arg1-not-empty,$(wordlist 3001,99999,$(INTERNAL_CLEAN_STEPS)))
endif
CURRENT_CLEAN_BUILD_VERSION :=
CURRENT_CLEAN_STEPS :=
clean_steps_file :=
rewrite_clean_steps_file :=
INTERNAL_CLEAN_STEPS :=
INTERNAL_CLEAN_BUILD_VERSION :=
endif # if not ONE_SHOT_MAKEFILE dont_bother
# Since products and build variants (unfortunately) share the same
# PRODUCT_OUT staging directory, things can get out of sync if different
# build configurations are built in the same tree. The following logic
# will notice when the configuration has changed and remove the files
# necessary to keep things consistent.
previous_build_config_file := $(PRODUCT_OUT)/previous_build_config.mk
# A change in the list of aapt configs warrants an installclean, too.
aapt_config_list := $(strip $(PRODUCT_AAPT_CONFIG) $(PRODUCT_AAPT_PREF_CONFIG))
current_build_config := \
$(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)-{$(aapt_config_list)}
current_sanitize_target := $(strip $(SANITIZE_TARGET))
ifeq (,$(current_sanitize_target))
current_sanitize_target := false
endif
aapt_config_list :=
force_installclean := false
force_objclean := false
# Read the current state from the file, if present.
# Will set PREVIOUS_BUILD_CONFIG.
#
PREVIOUS_BUILD_CONFIG :=
PREVIOUS_SANITIZE_TARGET :=
-include $(previous_build_config_file)
PREVIOUS_BUILD_CONFIG := $(strip $(PREVIOUS_BUILD_CONFIG))
PREVIOUS_SANITIZE_TARGET := $(strip $(PREVIOUS_SANITIZE_TARGET))
ifdef PREVIOUS_BUILD_CONFIG
ifneq "$(current_build_config)" "$(PREVIOUS_BUILD_CONFIG)"
$(info *** Build configuration changed: "$(PREVIOUS_BUILD_CONFIG)" -> "$(current_build_config)")
ifneq ($(DISABLE_AUTO_INSTALLCLEAN),true)
force_installclean := true
else
$(info DISABLE_AUTO_INSTALLCLEAN is set; skipping auto-clean. Your tree may be in an inconsistent state.)
endif
endif
endif # else, this is the first build, so no need to clean.
ifdef PREVIOUS_SANITIZE_TARGET
ifneq "$(current_sanitize_target)" "$(PREVIOUS_SANITIZE_TARGET)"
$(info *** SANITIZE_TARGET changed: "$(PREVIOUS_SANITIZE_TARGET)" -> "$(current_sanitize_target)")
force_objclean := true
endif
endif # else, this is the first build, so no need to clean.
# Write the new state to the file.
#
ifneq ($(PREVIOUS_BUILD_CONFIG)-$(PREVIOUS_SANITIZE_TARGET),$(current_build_config)-$(current_sanitize_target))
$(shell \
mkdir -p $(dir $(previous_build_config_file)) && \
echo "PREVIOUS_BUILD_CONFIG := $(current_build_config)" > \
$(previous_build_config_file) && \
echo "PREVIOUS_SANITIZE_TARGET := $(current_sanitize_target)" >> \
$(previous_build_config_file) \
)
endif
PREVIOUS_BUILD_CONFIG :=
PREVIOUS_SANITIZE_TARGET :=
previous_build_config_file :=
current_build_config :=
#
# installclean logic
#
# The files/dirs to delete during an installclean. This includes the
# non-common APPS directory, which may contain the wrong resources.
#
# Deletes all of the files that change between different build types,
# like "make user" vs. "make sdk". This lets you work with different
# build types without having to do a full clean each time. E.g.:
#
# $ make -j8 all
# $ make installclean
# $ make -j8 user
# $ make installclean
# $ make -j8 sdk
#
installclean_files := \
$(HOST_OUT)/obj/NOTICE_FILES \
$(HOST_OUT)/sdk \
$(PRODUCT_OUT)/*.img \
$(PRODUCT_OUT)/*.ini \
$(PRODUCT_OUT)/*.txt \
$(PRODUCT_OUT)/*.xlb \
$(PRODUCT_OUT)/*.zip \
$(PRODUCT_OUT)/kernel \
$(PRODUCT_OUT)/data \
$(PRODUCT_OUT)/skin \
$(PRODUCT_OUT)/obj/APPS \
$(PRODUCT_OUT)/obj/NOTICE_FILES \
$(PRODUCT_OUT)/obj/PACKAGING \
$(PRODUCT_OUT)/recovery \
$(PRODUCT_OUT)/root \
$(PRODUCT_OUT)/system \
$(PRODUCT_OUT)/vendor \
$(PRODUCT_OUT)/oem \
$(PRODUCT_OUT)/dex_bootjars \
$(PRODUCT_OUT)/obj/JAVA_LIBRARIES \
$(PRODUCT_OUT)/obj/FAKE
# The files/dirs to delete during a dataclean, which removes any files
# in the staging and emulator data partitions.
dataclean_files := \
$(PRODUCT_OUT)/data/* \
$(PRODUCT_OUT)/data-qemu/* \
$(PRODUCT_OUT)/userdata-qemu.img
# The files/dirs to delete during an objclean, which removes any files
# in the staging and emulator data partitions.
objclean_files := \
$(TARGET_OUT_INTERMEDIATES) \
$($(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATES)
# make sure *_OUT is set so that we won't result in deleting random parts
# of the filesystem.
ifneq (2,$(words $(HOST_OUT) $(PRODUCT_OUT)))
$(error both HOST_OUT and PRODUCT_OUT should be set at this point.)
endif
# Define the rules for commandline invocation.
.PHONY: dataclean
dataclean: FILES := $(dataclean_files)
dataclean:
$(hide) rm -rf $(FILES)
@echo "Deleted emulator userdata images."
.PHONY: installclean
installclean: FILES := $(installclean_files)
installclean: dataclean
$(hide) rm -rf $(FILES)
@echo "Deleted images and staging directories."
.PHONY: objclean
objclean: FILES := $(objclean_files)
objclean:
$(hide) rm -rf $(FILES)
@echo "Deleted images and staging directories."
ifeq "$(force_installclean)" "true"
$(info *** Forcing "make installclean"...)
$(info *** rm -rf $(dataclean_files) $(installclean_files))
$(shell rm -rf $(dataclean_files) $(installclean_files))
$(info *** Done with the cleaning, now starting the real build.)
endif
force_installclean :=
ifeq "$(force_objclean)" "true"
$(info *** Forcing cleanup of intermediate files...)
$(info *** rm -rf $(objclean_files))
$(shell rm -rf $(objclean_files))
$(info *** Done with the cleaning, now starting the real build.)
endif
force_objclean :=
###########################################################
.PHONY: clean-jack-files
clean-jack-files: clean-dex-files
$(hide) find $(OUT_DIR) -name "*.jack" | xargs rm -f
$(hide) find $(OUT_DIR) -type d -name "jack" | xargs rm -rf
@echo "All jack files have been removed."
.PHONY: clean-dex-files
clean-dex-files:
$(hide) find $(OUT_DIR) -name "*.dex" ! -path "*/jack-incremental/*" | xargs rm -f
$(hide) for i in `find $(OUT_DIR) -name "*.jar" -o -name "*.apk"` ; do ((unzip -l $$i 2> /dev/null | \
grep -q "\.dex$$" && rm -f $$i) || continue ) ; done
@echo "All dex files and archives containing dex files have been removed."
.PHONY: clean-jack-incremental
clean-jack-incremental:
$(hide) find $(OUT_DIR) -name "jack-incremental" -type d | xargs rm -rf
@echo "All jack incremental dirs have been removed."
Reference in New Issue View Git Blame Copy Permalink