Currently, the build timestamp saved to the build_date_timestamp
field in the MetricsBase metrics protobuf usually comes from a text
file named build_date.txt. It may not be accurate for metrics purposes.
Instead, use the build start time from Soong main UI for a better
timestamp.
Bug: b/140638454
Test: Ran and checked the build_date_timestamp by running the printproto
command.
Change-Id: I4d893fbbf9830ba21911e56ae13bc5272be47ae6
From aosp/1329396, the RBE metrics protobuf file is part of the
metrics uploading process. The RBE metrics protobuf file is
generated by running the bootstrap shutdown command. A new function
named DumpRBEMetrics was written in order to generate the RBE metrics
protobuf file before sending to the uploading process.
Bug: b/140638454
Test: * Unit test cases
* Ran RBE build on my local host and verified the
metrics protobuf file is created.
* Ran non-RBE build after RBE build and verified that
the previous metrics protobuf file was deleted.
Change-Id: I4b8068905cb67c4b8c2d94793917b98974fed707
The metrics uploader was currently running on foreground where it
would copy the metrics files in a separate directory and then forked
into the background for the upload process. As a result, running the
lunch command would take a second longer to run since each metrics
uploader run had an average of half a second.
Bug: 140638454
Test: * Wrote and updated unit test cases.
* Set ANDROID_ENABLE_METRICS_UPLOAD to point to the latest
metrics_uploader bash script. Executed the "lunch 1" command
and measured the running time. Executed "m nothing" command
and checked that the metrics were uploaded.
* Ran "lunch 1" and "m nothing" with
ANDROID_ENABLE_METRICS_UPLOAD=""
* Removed oauth from metrics_uploader and ran "m nothing" and
"lunch 1". The oauth Message appeared only to "m nothing"
Change-Id: I13c61e666c8f44613dee291a704cef6a27335188
Soong now supports the ability to upload metrics to another location
by setting the ANDROID_ENABLE_METRICS_UPLOAD to an uploader that
accepts the upload.proto proto buffer message. When the environment
variable is set, a set of build metrics files (soong_metrics,
rbe_metrics.pb and build_error) is uploaded.
Bug: 140638454
Test: * Wrote unit test cases
* Setup the uploader, built a succcessful and failed aosp_arm-eng
target and monitor the uploading of the metrics.
Change-Id: I76a65739c557dc90345e098ca03119a950ece2d2
Soong UI generates a proto file named build_progress.pb in $(OUT_DIR)
output directory that contains build action numbers (how many are executing,
finished and total) during the course of a build. This is for external
systems that invokes the Platform Build Systems and would like to know
the completion status.
Bug: b/150401146
Test: Wrote a bash script that continuously read the
build_progress.pb file and computed the build completed percentage
while building the aosp_arm-eng target. Compared the percentage between
the Soong output console and the one reported by the bash script.
Change-Id: I7c7347bc8e41958093892d8e2731c4f4169937dd
Create a highmem pool based on the total RAM and the number of CPUs,
with an override via the NINJA_HIGHMEM_NUM_JOBS variable. Put
metalava into the highmem pool.
Ninja does not support nested pools, and when goma or RBE is enabled
the maximum ninja parallelism is set very high with local jobs in a
local pool. When both the local pool and highmem pool are enabled,
the total number of local jobs will be as high as the sum of the sizes
of the two pools. Keep the highmem pool limited to 1/16th of the
local pool when remote builds are enabled to try to minimize the
effect while still limiting highmem jobs.
Fixes: 142644983
Test: m nothing, examine pools
Test: m USE_GOMA=true nothing, examine pools
Change-Id: Id79f11f44948992960ac34ecf831dacbe21bd332
Force soong_ui in dumpvars mode to use a dumb terminal so that it
doesn't print an empty status table. Also move the logs to files
that are prefixed with "dumpvars-" so that they don't rotate the
real build logs.
Fixes: 139307849
Test: lunch
Change-Id: If92421af07731fedc9ca42670f309e95922a2224
mm is now doing the same thing as mma. Now print a deprecation message
for other tools that may be setting ONE_SHOT_MAKEFILE directly (or users
that are still using a very old envsetup.sh).
Test: mm # does not print
Test: ONE_SHOT_MAKEFILE=bionic m
Change-Id: I98221657024d824a61c0d721d5c7dd1a2ea2fb1e
This is the first part of deprecating the mmm command. mmm will simply
be redirected to mmma by building the list of modules with their
dependencies.
Bug: b/135187558
Test: Ran mmm external/libusb:libusb.
Change-Id: I50cf0d6a07197556ab6130e612561c6d5a3fb31e
This is the first part of deprecating the mm command. mm will simply
be redirected to mma by building the modules and their dependencies.
Bug: b/135187558
Test: Ran mm in external/protobuf directory.
Change-Id: Idad40f89e3768aeb459172f632a44fd7b0a201bc
Keep a running map of the critical path to each edge as it
finishes. At the end of the build, find the edge with the
longest critical path and print the path to out/soong.log.
Test: critical_path_test.go
Change-Id: Ie01d26b068b768156b166bff00cdc3273e8124ca
Soong_ui produces a build_error raw file to $(OUT_DIR) where
the file contains a list of build action errors. Each build action
error represents an error raised by a command. The build_error file
is populated if there was a build error.
Bug: b/132969697
Test: Ran m for successful build. Introduced a broken build change,
ran m and verified using printproto that build_error was
generated successfully.
Change-Id: I690ca1778b4e56f144a3173ba1d16d8494c32c15
There was one case that did not work:
1) Create dir in root source tree
2) Run "m libc"
The build would fail as it was using the mma logic. A separate
one named BUILD_MODULES was added to allow building specific
modules in any directories using the "m" command.
Bug: b/130049705
Test: unit test cases, ran "m libc" in a tmp directory inside
of the source tree.
Change-Id: I8d23e685a673a311001ee8edd89bd73b662392dd
ctx.Writer is recommended stream to use for standard io.
Fixes: b/135487952
Test: Lunch and executed ./out/soong_ui --dumpvar-mode and
--dumpvars-mode to check the usage is output to the console.
Change-Id: I38351ebdb05f49f92d6b4bfb0423092299d1c5ea
The --build-mode flag is a new flag in soong_ui that accepts a build
action (m, mm, mmm, mma, mmma), the directory where the build action
is occuring and an optional list of build arguments and invokes the
build option. This is to deprecate the build actions behavior in
envsetup.sh and start using the one defined in soong_ui.
Bug: b/130049705
Test: Ran lunch and ran all the build action commands in soong_ui.
Ran a bunch of invalid commands such as no Android.mk file in
a specific directory, invalid target name, etc...
Change-Id: I88e9e59f47f8c5cdc872fb83a0f3f0a0919885b6
The metrics.proto needs to be imported to Google3 in order to unmarshal
the build metrics data from bigstore. Cleaned up the enum names to use
the Camel naming convention and renamed the build_metrics to
soong_metrics to be more specific to soong and to allow quering
soong_metrics files from bigstore.
Bug: b/135280521
Test: lunch andf m -j. Checked if soong_metrics was generated correctly
by using printproto command.
Change-Id: I998c8d05db592e94a653d6ca32250b80df3c9b21
Write log output through StatusOutput so that the status implementation
can synchronize it with its own output.
Test: status_test.go
Change-Id: I917bdeeea4759a12b6b4aa6d6d86ee18a2771723
terminal.Writer is now just a wrapper around stdio.Stdout() without
any useful functionality. Replace it with stdio.Stdout() as an
io.Writer.
Test: ui/terminal/status_test.go
Change-Id: I5bc5476afdca950b505642f0135a3af9d37fbe24
Currently, the command line argments is being processed in multiple
places. In the main soong_ui arguments, there are several if statements
that checks if a specific argument was specified in order to execute
the requested operation. This does not scale well when adding or
removing a command in the near future. In order to support the build
commands (m, mma, etc...) from the envsetup.sh in soong_ui, a refactor
was required in order to add a command rather quickly and to have the
flexibiity to unit test the command. The soong_ui arguments format is
as follows:
soong_ui <command> [<arg 1> <arg 2> ... <arg n>]
The <command> is a specific operation to be executed. The arguments
after the command are processed by the command itself.
Below is the list of changes made in this commit:
* Created a new command infrastructure that allows adding
or deprecating a command easily.
* Fixed a bug when running ./soong_ui.bash directly would cause
a panic due to index being out of range for args list.
Bug: b/130049705
Test: Below is the list of testing done on this commit:
* Ran lunch and verified that the output is the same as the the output
without the modifications. lunch indirectly runs soong_ui passing
in the --dumpvar-mode (to read makefile variables such as
TARGET_PRODUCT) and --dumpvars-mode (to build the build cache).
* Ran ./soong_ui.bash directly (with unsupported flags and no flags)
and the proper message appeared that soong native UI is not yet
available.
* Ran m, mm, mmm, mma, mmma commands.
* Ran the make installclean command:
make -j80 TARGET_PRODUCT=aosp_arm64 TARGET_BUILD_VARIANT=eng dist DIST_DIR=/tmp/helloworld installclean
* Ran ./out/soong_ui -j80 --make-mode PRODUCT-aosp_arm64-eng dist checkbuild tests
Change-Id: Iee4de7ec0fa4661206fda8ae1fe6fa4487d9bb22
Merged-In: Iee4de7ec0fa4661206fda8ae1fe6fa4487d9bb22
It appears that there's a bug in repo where when a linkfile is removed
from the manifest, the symlink remains in the source tree.
Cleaning this up needs to happen before we start scanning the source
tree for Android.bp/Android.mk files, so this has to be done very early
-- way before CleanSpec processing could handle it.
Bug: https://bugs.chromium.org/p/gerrit/issues/detail?id=10583
Test: ln -s missing hardware/qcom/sdm710/Android.bp; m
Change-Id: Ib68f2507ffe58ccdd9fbc88925f8a4f6150f2f7d
If ANDROID_QUIET_BUILD environment variable is set to '1', do not show 20
lines of the environment variables. In addition, for the failing step show
only the step name and output, omitting the command proper (the verbose log
as well as error.log still contains it).
If build succeeds, the output of the build itself consists of a single
line:
```
> m androidmk
[100% NN/NN] <last command>
```
When it fails, the output does not contain sometimes very long command
line:
```
> m androidmk
[ 97% NN/MM] test androidmk
FAILED: <step>
--- FAIL: TestEndToEnd (0.01s)
androidmk_test.go:1025: failed testcase 'prebuilt_etc_TARGET_OUT_ETC'
input:
include $(CLEAR_VARS)
LOCAL_MODULE := etc.test1
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_PATH := $(TARGET_OUT_ETC)/foo/bar
include $(BUILD_PREBUILT)
expected:
prebuilt_etc {
name: "etc.test1",
filename: "foo/bar",
}
got:
prebuilt_etc {
name: "etc.test1",
filename: "foo/bar",
}
FAIL
17:50:53 ninja failed with: exit status 1
```
[The related change in build/make/envsetup.sh suppresses timing display
when the same variable is set.]
Change-Id: I4d3c72457de031ff58a324c2fe98f4c1d10f8239
Test: treehugger
Test: Dumped the text formated based metrics file to out dir,
and checked the file.
Bug: b/63815990
Change-Id: Iff476f72a0be74eb53b6b26ef468d11c0f24a404
This adds a new status package that merges the running of "actions"
(ninja calls them edges) of multiple tools into one view of the current
state, and gives that to a number of different outputs.
For inputs:
Kati's output parser has been rewritten (and moved) to map onto the
StartAction/FinishAction API. A byproduct of this is that the build
servers should be able to extract errors from Kati better, since they
look like the errors that Ninja used to write.
Ninja is no longer directly connected to the terminal, but its output is
read via the protobuf frontend API, so it's just another tool whose
output becomes merged together.
multiproduct_kati loses its custom status routines, and uses the common
one instead.
For outputs:
The primary output is the ui/terminal.Status type, which along with
ui/terminal.Writer now controls everything about the terminal output.
Today, this doesn't really change any behaviors, but having all terminal
output going through here allows a more complicated (multi-line / full
window) status display in the future.
The tracer acts as an output of the status package, tracing all the
action start / finish events. This replaces reading the .ninja_log file,
so it now properly handles multiple output files from a single action.
A new rotated log file (out/error.log, or out/dist/logs/error.log) just
contains a description of all of the errors that happened during the
current build.
Another new compressed and rotated log file (out/verbose.log.gz, or
out/dist/logs/verbose.log.gz) contains the full verbose (showcommands)
log of every execution run by the build. Since this is now written on
every build, the showcommands argument is now ignored -- if you want to
get the commands run, look at the log file after the build.
Test: m
Test: <built-in tests>
Test: NINJA_ARGS="-t list" m
Test: check the build.trace.gz
Test: check the new log files
Change-Id: If1d8994890d43ef68f65aa10ddd8e6e06dc7013a
This reverts commit fb941913a3.
Reapplies I4933187e8b72f2ef0c32d18ffea756e2c6fa417c with fixes
to disable the check for mac builds, where many modules are
disabled and the check is just going to cause more problems.
Test: m checkbuild
Change-Id: If6712c90ececd5d015fcdcdeefe0c3d4f5590711
Get a list of leaf nodes in the dependency graph
from ninja, and make sure none of them are in the
output directory. This ensures that there are no
rules that depend on a file in the output directory
that doesn't have rule to generate it. The check
will catch a common set of build failures where
a rule to generate a file is deleted (either by
deleting a module in an Android.mk file, or by
modifying the build system incorrectly). These
failures are often not caught by a local incremental
build because the previously built files are still
present in the output directory.
Bug: 36843214
Bug: 68062417
Test: manual
Change-Id: I4933187e8b72f2ef0c32d18ffea756e2c6fa417c
build/soong/soong_ui.bash --dumpvars-mode \
--vars="..." \
--abs-vars="..." \
--var-prefix="..." \
--abs-var-prefix="..."
is similar to the previous:
CALLED_FROM_SETUP=true BUILD_SYSTEM=build/core \
make -f build/core/config.mk dump-many-vars \
DUMP_MANY_VARS="..." \
DUMP_MANY_ABS_VARS="..." \
DUMP_VAR_PREFIX="..." \
DUMP_ABS_VAR_PREFIX="..."
and
build/soong/soong_ui.bash --dumpvar-mode [--abs] VAR
is similar to the previous:
CALLED_FROM_SETUP=true BUILD_SYSTEM=build/core \
make -f build/core/config.mk dumpvar-[abs-]-VAR
But uses soong_ui and ckati, so that we use a consistent make parser and
sandboxing configurations.
One major output difference between the pure make implementation and
this one is that report_config in Go is implemented using embedded
newlines in single quotes, while the make implementation uses `` with
embedded echo commands. This seems to work fine for both bash and zsh,
and report_config isn't meant to be machine-parsed anyways.
Test: build/soong/soong_ui.bash --dumpvar-mode report_config
Test: build/soong/soong_ui.bash --dumpvar-mode TARGET_DEVICE
Test: build/soong/soong_ui.bash --dumpvar-mode --abs PRODUCT_OUT
Test: build/soong/soong_ui.bash --dumpvar-mode --abs ALL_PRODUCTS
Test: build/soong/soong_ui.bash --dumpvars-mode --vars="report_config TARGET_DEVICE" --abs-vars="ALL_PRODUCTS"
Test: build/soong/soong_ui.bash --dumpvars-mode --vars=TARGET_DEVICE --abs-vars=PRODUCT_OUT --var-prefix=v_ --abs-var-prefix=a_
Change-Id: I0fbd0732bbf6fcfcd24084cf3c830a91a4b6bfc2
The Finder runs roughly 200ms faster than findleaves.py in aosp,
and runs roughly 400ms faster in internal master.
Bug: 64363847
Test: m -j
Change-Id: I62db8dacc90871e913576fe2443021fb1749a483
Kousik Kumar