Make the cleanspec & Android.mk runs of kati use much of the same code
and arguments.
Also renames 'Kati' to 'KatiBuild' in many cases, in the the expectation
that we'll have a 'KatiPackage' step in the future.
Use --no_ninja_prelude and move local_pool & _kati_always_build_ into
the combined ninja file. This will reduce the need to re-read makefiles
when Goma is enabled, and it allows us to include more than one
Kati-generated ninja file in the build graph.
Bug: 116968624
Test: build_test on downstream branches
Change-Id: Ibdac689b81f62dc293647fad917d84946f2c3cfa
These warnings are usually hit in one of the two conditions:
1. Targets that should be marked .PHONY, but are not.
2. Attempts to define output files in the source tree.
See https://android.googlesource.com/platform/build/+/master/Changes.md#phony_targets
for more information.
Test: multiproduct_kati in all downstream branches
Change-Id: Ibe37cce320612825c22987e94d0740e8c0565b6f
These still default to warnings, but if a board decides to set
BOARD_BROKEN_PHONY_TARGETS := false, they'll turn into errors. More
likely I'll just be marking the broken targets as broken, then switching
the logic here to be like the dup rules warnings/errors.
Test: On a build with warnings, try <missing>, "false", and "true"
Change-Id: I041e1ff4618c4114ec43015b6c0ae1b49b36b6f8
--warn_real_to_phony will print a warning any time that a non-PHONY rule
depends on a PHONY rule. Since PHONY rules are always considered dirty
this would force rebuilds on every incremental build. Real rules should
always depend on rules that have real outputs.
--warn_phony_looks_real will print a warning any time that a PHONY rule
has an output that looks like a file (has as / in it). This is can cause
confusion for users if it's not a real file, and it shouldn't be marked
as PHONY if it will be run every time (since that will slow down
incremental builds).
Test: run build_test on downstream branches, see few warnings
Change-Id: Id135c85c991976be33cd48a34eba0caaff1eda2c
This adds a new status package that merges the running of "actions"
(ninja calls them edges) of multiple tools into one view of the current
state, and gives that to a number of different outputs.
For inputs:
Kati's output parser has been rewritten (and moved) to map onto the
StartAction/FinishAction API. A byproduct of this is that the build
servers should be able to extract errors from Kati better, since they
look like the errors that Ninja used to write.
Ninja is no longer directly connected to the terminal, but its output is
read via the protobuf frontend API, so it's just another tool whose
output becomes merged together.
multiproduct_kati loses its custom status routines, and uses the common
one instead.
For outputs:
The primary output is the ui/terminal.Status type, which along with
ui/terminal.Writer now controls everything about the terminal output.
Today, this doesn't really change any behaviors, but having all terminal
output going through here allows a more complicated (multi-line / full
window) status display in the future.
The tracer acts as an output of the status package, tracing all the
action start / finish events. This replaces reading the .ninja_log file,
so it now properly handles multiple output files from a single action.
A new rotated log file (out/error.log, or out/dist/logs/error.log) just
contains a description of all of the errors that happened during the
current build.
Another new compressed and rotated log file (out/verbose.log.gz, or
out/dist/logs/verbose.log.gz) contains the full verbose (showcommands)
log of every execution run by the build. Since this is now written on
every build, the showcommands argument is now ignored -- if you want to
get the commands run, look at the log file after the build.
Test: m
Test: <built-in tests>
Test: NINJA_ARGS="-t list" m
Test: check the build.trace.gz
Test: check the new log files
Change-Id: If1d8994890d43ef68f65aa10ddd8e6e06dc7013a
There are no users of these, other than the PDK, which is already
exempted.
Test: m nothing
Test: Check for warnings in downstream build_test logs
Test: Check for warnings in last two days of continuous build logs
Change-Id: I7c7d0068e928e591355c39d22635af86b8f43f1b
We've turned off suffix rules with .SUFFIXES, but make them explicit
errors.
Test: build_test on downstream branches
Change-Id: I682ee3eb3a8f1451cd7e16f1e1d59afca5d21a26
So that we can see where the time is going. Also removes the obsolete
ASAN_OPTIONS, which moved to kati, but I forgot to update this instance.
Test: m nothing; check out/soong.log
Change-Id: I0c4066bad20fc2dc22b389f4c973d10dca554ee3
The find commands used to locate the BoardConfig.mk can't be optimized
by Kati, so we're currently spending ~125ms three times during every
build (dumpvars, cleanspec, and the main kati run). Preserve the value
of TARGET_DEVICE_DIR from the dumpvars run so that we only need to run
the find commands once.
Bug: 78020936
Test: out/build-taimen.ninja is identical
Test: out/soong.log shows that we're not running these finds again
Change-Id: Iee56b454c3661de2b58c161169218ecaf2135398
Many board still have this problem, but if we can switch some over,
we'll prevent global problems and have the ability to clean boards up
one-by-one.
Bug: 77611511
Test: lunch aosp_arm-eng; m nothing
Test: lunch aosp_marlin-eng; m nothing
Test: build_test on all downstream branches
Change-Id: I78bee44adde2059d01188658b9050927748d2028
If Kati ever wrote a line over 64k characters, the scanner in soong_ui
would error, and Kati would hang trying to write into the pipe. Now if
the Scanner errors out, fall back to copying directly from the pipe to
the output.
Test: Add $(warning $(shell find frameworks)), does not hang
Change-Id: I86412ad2f53f2fe3cbda901ee673abb904d56d3c
This way we strip out ANSI codes when using dumb terminals. It's likely
overkill to use katiRewriteOutput, but we should rarely see any output
on stderr while dumping variables. This also lets us turn on kati_stats.
Bug: 71729611
Test: lunch missing-eng (colored error)
Test: lunch missing-eng 2>&1 | cat (non-colored)
Test: TERM=dumb lunch missing-eng (non-colored)
Change-Id: Ic63fd42d82a4a64e5c68aecd9ae0f242a0d703f1
Pass --dump-stats to ckati, but filter out the '*kati*' lines so that
they only end up in our verbose output. That way we've always got access
to the statistics.
Bug: 36182021
Test: m nothing; cat out/soong.log
Change-Id: Iaf7a814fc67f3e475c913faf69924a7f4e2ae3b3
This speeds up dumping make variables from ~380ms using make to ~220ms
using ckati. It also means that we're consistently using the same parser
for builds (with the same .KATI_READONLY/etc extensions).
envsetup.sh (lunch) / other scripts still use make, changing those to go
through soong_ui will be a future change.
Test: m clean; m nothing
Test: USE_GOMA=true m nothing
Test: m PRODUCT-aosp_x86-sdk
Test: m APP-Calculator
Test: build/soong/build_test.bash -only-config (on AOSP and internal master)
Change-Id: I6ca554de8de4955fb869001d06d29969b75751cc
Instead of pairing the reading of CleanSpec.mk files with the reading of
Android.mk files, split them into separate, individually cachable steps.
This way we only read Android.mk files once after a clean/sync. We'll
still read the CleanSpec.mk files multiple times, but that's
significantly faster than reading all the Android.mk files.
This adds about 50ms if kati doesn't need to reread the CleanSpec.mk
files. Reading all the CleanSpec.mk files takes about a second.
Bug: 35970961
Test: m clean; m nothing; m nothing
Test: Add CleanSpec.mk line, see it executed.
Change-Id: I83bad15c50709510959d5b8b673a907b8aa7de82
Kati sets detect_leaks=0 by default now.
Test: unset ASAN_OPTIONS; SANITIZE_HOST=address m nothing
Change-Id: I0cbf04ae9ed40de520abca3fb35c65e7f543682d
We're seeing some rare crashes that appear to be stack overflows. To get
better debugging, use the asan version of ckati when 'dist' is
specified.
Bug: 36182021
Test: m -j
Test: m -j dist
Test: make -j dist (w/o lunch)
Change-Id: Ic3a5590974bfd718bf1929355d344b5933ac1d4f
Wrap os/exec.Cmd to use our Context and Config interfaces for automatic
logging and error handling. It also simplifies environment modification
based on the Config's environment.
This also adds sandboxing on Macs using sandbox-exec. A simple profile
is provided that only logs on violations, though multiproduct_kati on
AOSP has no violations. This isn't applied to ninja, only make / soong /
kati to start with. I measured <5% time increase in reading all
makefiles, and no noticable difference when kati doesn't regenerate.
I'd like to spin up a process to dump violation logs into our log file,
but the log reporting changed over the range of Mac versions that we
support, so that's going to be more complicated. Opening Console.app
works in all cases if you're local -- just search/filter for sandbox.
Linux sandboxing will be implemented later -- the sandbox definition is
opaque enough to support a different implementation.
Test: multiproduct_kati on AOSP master on Mac
Change-Id: I7046229333d0dcc8f426a493e0f7380828879f17
I missed this when converting to soong_ui.
Test: m -j blueprint_tools (check soong.log)
Test: SANITIZE_HOST=address m -j blueprint_tools
Change-Id: I01eb567db6848dc36dd679557291a4e600a63bba
We can start removing out directories again in multiproduct_kati, since
the opendir bug has been fixed.
Add --color_warnings to the Kati command line. Since this is different
from Make, take this opportunity to reorder the command line to make
more sense. This wasn't done before because kati forces a regen whenever
the command line changes.
Test: USE_SOONG_UI=true m -j blueprint_tools
Change-Id: I5ad03359fbc16db482722946202297c1ae0f2b90
1. Collapses the "including .../Android.mk ..." lines like ninja does,
so that we overwrite the last line if there wasn't anything else to
print.
2. Strips ansi control codes so that log files don't include unreadable
characters.
Test: m -j
Test: m -j | tee output.log (with colored output)
Change-Id: Ib18437f6f9d37084360097a9d586800c833072c5
This creates a rotating build.trace.gz in the out directory that can be
loaded with chrome://tracing. It'll include start and end timings for
make/soong/kati/ninja, and it will import and time-correct the ninja log
files.
Test: m -j; load out/build.trace.gz in chrome://tracing
Test: multiproduct_kati -keep; load out/multiproduct*/build.trace.gz
Change-Id: Ic060fa9515eb88d95dbe16712479dae9dffcf626
Right now this mostly just copies what Make is doing in
build/core/ninja.mk and build/core/soong.mk. The only major feature it
adds is a rotating log file with some verbose logging.
There is one major functional difference -- you cannot override random
Make variables during the Make phase anymore. The environment variable
is set, and if Make uses ?= or the equivalent, it can still use those
variables. We already made this change for Kati, which also loads all of
the same code and actually does the build, so it has been half-removed
for a while.
The only "UI" this implements is what I'll call "Make Emulation" mode --
it's expected that current command lines will continue working, and
we'll explore alternate user interfaces later.
We're still using Make as a wrapper, but all it does is call into this
single Go program, it won't even load the product configuration. Once
this is default, we can start moving individual users over to using this
directly (still in Make emulation mode), skipping the Make wrapper.
Ideas for the future:
* Generating trace files showing time spent in Make/Kati/Soong/Ninja
(also importing ninja traces into the same stream). I had this working
in a previous version of this patch, but removed it to keep the size
down and focus on the current features.
* More intelligent SIGALRM handling, once we fully remove the Make
wrapper (which hides the SIGALRM)
* Reading the experimental binary output stream from Ninja, so that we
can always save the verbose log even if we're not printing it out to
the console
Test: USE_SOONG_UI=true m -j blueprint_tools
Change-Id: I884327b9a8ae24499eb6c56f6e1ad26df1cfa4e4
Dan Willemsen