This follows the same pattern as is used by the prebuilt_apex in order
to make files encapsulated with a prebuilt .apex file available for use
by the rest of the build. It separates the extraction of the
appropriate apex from the zip supplied to apex_set into a separate
module type whose output is used by the apex_set and will (in a follow
up change) be used by the deapexer module too.
Bug: 181267622
Test: m droid
Change-Id: Icd13ce1f21845494e875d3e092abd4a9d2efca57
This dedups the apex selection (which was previously being done by both
the apex.Prebuilt module type and the Deapexer module type) by
separating it out into its own module.
The apex.Prebuilt module retrieves the selected apex from its
selected_apex property which is simply initialized with
":<selector-module-name>".
The Deapexer module retrieves the selected apex it should use from its
src property which is initialized in the same way. That makes it easy
for the Deapexer module to be reused by the apex_set in a similar way.
Bug: 181267622
Test: m droid
Change-Id: I90cfb55698d35a97dcf28b95afcb1f58584bc90c
Previously, if an appropriate src property was not specified it would
return "" which resolves to the top level directory. This change causes
it to report an error.
Bug: 181267622
Test: m droid
Change-Id: Ia5be324a0eff18e43b352d71c6768c8767986053
Originally, when the prebuilt_apex was first created, it selected the
source to use in its DepsMutator. It did that because that was a
convenient place for it to perform that work which had to be:
* After the arch mutator had run so MultiTargets() was available.
* Before the prebuilt_select mutator runs as that relied on the Source
property to have been set.
Change 064b70c9 then duplicated the call from the DepsMutator of the
deapexer module type that was added as part of the work to make dex
files available for hiddenapi processing.
Change 356f7d45 moved it out of the the DepsMutator methods into its
their own mutators, presumably because it interfered with the
Soong -> Bazel conversion work.
This change improves the existing PrebuiltSrcsSupplier mechanism to
support reporting errors so that the logic for selecting the source can
be done on demand rather than in separate mutators.
The main complication was that PrebuiltSrcsSupplier is called with a
BaseModuleContext for both source and prebuilt modules so it cannot use
any methods on it that are related to the current module. That
necessitated adding MultiTargets() to android.Module.
Bug: 181267622
Test: m droid
Change-Id: I106c78fd21016f051a315b82b470d8f12b1f820b
Add a ctx parameter to AndroidMkExtraEntriesFunc to allow them to
access providers.
Test: m checkbuild
Change-Id: Id6becc1e425c3c3d8519248f8c0ce80777fac7cc
Merged-In: Id6becc1e425c3c3d8519248f8c0ce80777fac7cc
This currently expands all globs, still need to support converting glob
syntax.
Test: go build_conversion_test
Test: GENERATE_BAZEL_FILES=true m nothing
Test: m nothing
Bug: 165114590
Change-Id: If7b26e8e663d17566fad9614ca87a8da1f095284
Dexpreopt and boot jars package check all require access to dex
implementation jars created for java_library and java_sdk_library. They
were available when building from source but not when building from
prebuilts, even though they are embedded within the .apex files that
are referenced from prebuilt_apex.
This changes adds support to prebuilt_apex to export the dex
implementation jars and updates java_import to use those exported dex
implementation jars.
In a source build dexpreopt/boot jars package check access the apex (or
platform) specific variant of a java_library, e.g. core-oj, from which
it retrieves the dex implementation jar path.
After this change in a prebuilt build dexpreopt/boot jars package check
behave in the same way except in this case they retrieve the dex
implementation jar path from the apex (or platform) specific variant of
the java_import, e.g. core-oj.
The work to export files from a `.apex` file for use by other modules
is performed by a new `deapexer` module type. It is not used directly
in an `Android.bp` file but instead is created implicitly by
`prebuilt_apex`,
In order to do that this contains the following changes:
* Adds a new `dexapexer` module type to handle the exporting of files
from the `.apex` file.
* Adds an exported_java_libs property to prebuilt_apex to specify the
set of libraries whose dex implementation jars need exporting.
* Creates apex specific variants of the libraries listed in the
exported_java_libs property.
* Adds the set of exported files to the ApexInfo to make them available
to the apex specific variants.
* Prevents the prebuilt_apex variants from being merged together as
they will not be compatible.
* Modifies java_import to use the exported file for variants of a
prebuilt_apex.
* Adds a ninja rule to unpack (using deapexer) the contents of the
prebuilt_apex's apex file, verify that the required files are present
and make them available as outputs for other rules to use.
* Some minor refactorings to support these changes.
* Adds tests to cover prebuilt only, prebuilt with source preferred,
and prebuilt preferred with source.
Test: m nothing
Bug: 171061220
Change-Id: Ic9bed81fb65b92f0d59f64c0bce168a9ed44cfac
The properties and logic to select the appropriate arch specific src
property will need to be shared between the 'prebuilt_apex' module type
and an upcoming 'deapexer' module type to which the `prebuilt_apex`
will delegate responsibility for exporting the '.apex' file's contents.
This refactoring extracts them into the new ApexFileProperties struct
for reuse.
Bug: 171061220
Test: m nothing
Change-Id: Iac321a28afc469e885ee5b19ad33fecd94117236
SkipInstall is actually primarily used to prevent making a module
visible to Make, rename it and add new SkipInstall that actually
skips installation without affecting Make.
Call c.SkipInstall() for uninstallable cc modules to allow calling
c.installer.install, which will collect PackagingSpecs for
uninstallable cc modules, allowing them to be used by genrules.
Bug: 124313442
Test: m checkbuild
Change-Id: I8038ed5c6f05c989ac21ec06c4552fb3136b9a7a
In apex_set and cc_prebuilt_library_*, provide a way to specify an
alternative source to use when build with sanitizers.
Test: prebuilt_test, apex_test
Change-Id: I1ab8091bf696d94da3547cf5248853df489bdee6
The test case I removed is invalid. The codename has had its int
assigned, but the config claims it is not final.
If this ever does need to be supported it's just a matter of making
sure the Q -> 29 mapping (or whatever) in the finalized codenames map
in android/api_levels.go.
Test: treehugger
Bug: http://b/154667674
Change-Id: I4f42ec2fd4a37750519ee3937938a1c65b6bb1e8
prebuilt_apex has been disabled when the device is configured for
flattened APEXes, sanitized, instrumented, or built unbundled. However,
apex_set which is another type of APEX prebuilt wasn't disabled for the
same conditions.
This change fixes the discripency. apex_set modules are also force
disabled when the prebuilts are not expected.
Bug: 161316762
Bug: 160933444
Test: OVERRIDE_TARGET_FLATTEN_APEX=true m
The built image has only the flattened APEXes and the device boots
Change-Id: I6c90dfb28d565861a473a1bdce93269ec370601d
apex_set is a set of prebuilt apex files. To support GSI which installs
both flattened and unflattened APEXes when apex_set is used, we extract
the contents from the selected APEX file.
Bug: 159711661
Test: TARGET_PRODUCT=gsi_gms_arm64 m
should install flattened apexes in /system/system_ext/apex
Change-Id: I0a51b9f4a4537d3230aaa3eece532664ea18bc7c
apex_sets is a new module type that can be used to deliver pre-signed
APEXes, which previously could be done only via prebuilt_apex.
Soon gnow understands apex_sets module types and emits the signing info
of the modules to apexkeys.txt
Exempt-From-Owner-Approval: cherry-pic from AOSP
Bug: 158729168
Test: m
Merged-In: I9507375342ec053309660d94c931a79bf4f21218
(cherry picked from commit 8d6c51ebcc)
Change-Id: I9507375342ec053309660d94c931a79bf4f21218
apex_sets is a new module type that can be used to deliver pre-signed
APEXes, which previously could be done only via prebuilt_apex.
Soon gnow understands apex_sets module types and emits the signing info
of the modules to apexkeys.txt
Bug: 158729168
Test: m
Change-Id: I9507375342ec053309660d94c931a79bf4f21218
apex_set takes an .apks file that contains a set of prebuilt apexes with
different configurations. It uses extract_apks to select and install the
best matching one for the current target.
Bug: 153456259
Test: apex_test.go
Test: com.android.media.apks
Change-Id: I1da8bbcf1611b7c580a0cb225856cbd7029cc0a7
Merged-In: I1da8bbcf1611b7c580a0cb225856cbd7029cc0a7
apex_set takes an .apks file that contains a set of prebuilt apexes with
different configurations. It uses extract_apks to select and install the
best matching one for the current target.
Bug: 153456259
Test: apex_test.go
Test: com.android.media.apks
Change-Id: I1da8bbcf1611b7c580a0cb225856cbd7029cc0a7
When prebuilt_apex overrides/replaces other apex, the same symlinks need
to be created as well.
Bug: 143192278
Test: 1. add prebuilt_apex with vndk apex
with overrides set as ["com.android.vndk.current"]
2. m <prebuilt apex>
3. check if vndk symlinks are created
Change-Id: I8ee9c981ea9c7202ccf5143b3f43e6848773cd63
AndroidMkEntries now returns multiple AndroidMkEntires so that a module
can emit multiple Make modules if needed.
Bug: 128708192
Test: m
Change-Id: I56b6f76d22943b80329951c5acb80a1b932441ad
apex.go is too big. Separate the build rule and android.mk generation
logic into builder.go and androidmk.go, respectively. prebuilt_apex is
moved to prebuilt.go as well.
No refactoring has been made other than the splitting.
Test: m
Change-Id: I839ab0a1ba2b70ce82d98ac1fa8e3534808b5fd3
Paul Duffin