For smart terminals, default to using the status table, using 1/4 of the
terminal height (with a min of 1 and a max of 10).
This behavior can still be overriden to a specific height with
SOONG_UI_TABLE_HEIGHT, and turned off by setting SOONG_UI_TABLE_HEIGHT
to 0.
Test: m <adjust terminal height, see it shrink when it gets too short>
Test: SOONG_UI_TABLE_HEIGHT=20 m
Test: SOONG_UI_TABLE_HEIGHT=0 m
Change-Id: I224348a29a6e07f168c92cf5514a94bd27e32618
The code still needs to exist, but for buildspec.mk files, not the
PRODUCT-* arguments.
Test: none
Change-Id: I60c6044ab2d1627af7e6e2e8831b77d9db12aa55
This is done so that prototype tooling can write logs inside the DIST_DIR.
Test: I wrote out all the environment variables being passed to
goma_ctl.py and the output is https://paste.googleplex.com/6663469954760704. It contains both DIST_DIR and other variables.
Change-Id: Ia5c70e58aa1b87db9777c59cf3e5df1c9e20f08c
Test: Built aosp_arm-user with and without USE_RBE. USE_RBE uses
a proxy script in place of rewrapper.
Change-Id: I5bf008a940513872d70b5b215bd6209f759826ae
If OUT_DIR has been specified through the command line arguments,
it is sanitized first and NewConfig sets the OUT_DIR in the build
environment. When calling OutDir from Config instance, the out
was being sanitized again which is unnecessary.
Bug: b/118730755
Test: Ran unit test cases, "lunch" followed by "m" command.
Change-Id: Ieb4ffa1026c802c76c7369e8cdb3923a4c70f4b3
Previously, any of the build commands (mma, mmma, etc...) would traverse
up the directory path until an Android build file has been found. That
directory path would eventually become the MODULES-IN-<dir name> build
target. The directory where the m* command was executed may contain a
build file in a sub directory. For that case, the build target is the
MODULES-IN-<dir name> where dir is the directory of the executed m*
command since the target has been constructed by the core makefile.
Bug: b/118730755
Test: Wrote and ran unit test cases. Ran "lunch", "m". Went to a
directory in AOSP that had build files in sub directories and
executed mma. Went to a directory that had only build files in
parent directories and executed mma.
Change-Id: I9458cbc4bf0fc25bfb0848e96e92d261442d5cb0
For mmma and mmm, the findBuildFile function in config.go is invoked every time
for specified directories and directories with targets. For directories with
targets, an Android build file must exist in the directory where mmma and mmm
was invoked. There is no need to invoke findBuildFile function as a
simple check of the build file exists in the specified directory.
This is also refactoring the code for b/118730755
Bug: b/118730755
Test: Executed unit test cases through Intellij and executed mmma
command: "mmma external/protobuf:aprotoc external/bzip2".
Change-Id: I5428e3a3c36f77ff740617564b7853705521f29f
Allow running Soong in a headless delve debugger by passing
SOONG_DELVE=<listen addr> in the environment.
Bug: 80165685
Test: SOONG_DELVE=:1234 m nothing
Change-Id: Icfc893c8a8354a9bbc99112d9c83259cb41906d1
When running ninja stream stdout to the status writer. This improves
the ninja -d explain behavior, and will also allow Soong to be put
into the ninja console pool letting it print timely output to the
console.
Bug: 80165685
Test: NINJA_ARGS="-d explain" m
Change-Id: I40f03fc01d837ad91d400eae378007a7ce807705
The build directory passed in to soong_ui can contain a
symbolic link. soong_ui was not evaluating the build
directory to retrieve the true path, hence failing to
execute the internal soong.
Fixes: b/135995632
Test: Unit test case and executed the scenario in the bug
description.
Change-Id: I5779c6aa3f3183810437dbe2b2d4e40acbafb205
Tests use fakeSmartTerminal, this case must not be affected
by the TERM setting.
Test: TERM=dumb make
Change-Id: Ib926a1c6ba2d8c4117d412fe351d872ccfc1c799
When figuring out terminal type, check whether TERM=dumb is set.
Test: m nothing
Test: TERM=dumb m nothing
Test: m nothing | tee log
Change-Id: Ie13ca99eb84b798644d618ad1c8c1fb8ec8bb049
Keep a running map of the critical path to each edge as it
finishes. At the end of the build, find the edge with the
longest critical path and print the path to out/soong.log.
Test: critical_path_test.go
Change-Id: Ie01d26b068b768156b166bff00cdc3273e8124ca
Soong_ui produces a build_error raw file to $(OUT_DIR) where
the file contains a list of build action errors. Each build action
error represents an error raised by a command. The build_error file
is populated if there was a build error.
Bug: b/132969697
Test: Ran m for successful build. Introduced a broken build change,
ran m and verified using printproto that build_error was
generated successfully.
Change-Id: I690ca1778b4e56f144a3173ba1d16d8494c32c15
When printing the action table, color the duration of commands that
have been running for 30 seconds yellow, and commands that have been
running for 60 seconds red.
Test: manual
Change-Id: I61cb21b0dae10811d345cb9f62cd07915cfc69ee
There was one case that did not work:
1) Create dir in root source tree
2) Run "m libc"
The build would fail as it was using the mma logic. A separate
one named BUILD_MODULES was added to allow building specific
modules in any directories using the "m" command.
Bug: b/130049705
Test: unit test cases, ran "m libc" in a tmp directory inside
of the source tree.
Change-Id: I8d23e685a673a311001ee8edd89bd73b662392dd
The metrics.proto needs to be imported to Google3 in order to unmarshal
the build metrics data from bigstore. Cleaned up the enum names to use
the Camel naming convention and renamed the build_metrics to
soong_metrics to be more specific to soong and to allow quering
soong_metrics files from bigstore.
Bug: b/135280521
Test: lunch andf m -j. Checked if soong_metrics was generated correctly
by using printproto command.
Change-Id: I998c8d05db592e94a653d6ca32250b80df3c9b21
Add the following build actions {BUILD_MODULES_IN_A_DIRECTORY,
BUILD_MODULES_IN_DIRECTORIES} in soong_ui config so the bash code version of
build commands (m, mm, mma, mmm, mmma) in build/make/envsetup.sh can be deprecated.
This is to allow up to date bug fixes on the build commands.
Bug: b/130049705
Test: Unit test cases
Change-Id: I772db1d4e9c1da5273374d1994eb5e8f17cd52f2
If SOONG_UI_TABLE_HEIGHT is set, enable a new smart terminal display
that prints the normal scrolling build history in the top region of
the screen and an action table of the longest currently running
actions in the bottom region of the screen. This provides better
visibility into which are the longest running actions and when the
build parallelism is very low.
Test: manual
Change-Id: I677d7b6b008699febd259110d7f9e0f98d80c535
Instead of reading the terminal size on every status update, register
for SIGWINCH to read and store the size when it changes.
This reapplies I555ad21a31a2c924ab0ca681e0c8f00df42a370a with a fix
for a race condition in TestSmartStatusOutputWidthChange.
Test: status_test.go
Change-Id: If342cb4cc8e4ed57af9e3bb417758348c9c41247
Instead of reading the terminal size on every status update, register
for SIGWINCH to read and store the size when it changes.
Test: status_test.go
Change-Id: I555ad21a31a2c924ab0ca681e0c8f00df42a370a
Bolding the status line provides differentiation between output
of each command.
Test: status_test.go
Change-Id: I9d46761e69c5af0a0aa86c7921e121cfd2a3fc82
Write log output through StatusOutput so that the status implementation
can synchronize it with its own output.
Test: status_test.go
Change-Id: I917bdeeea4759a12b6b4aa6d6d86ee18a2771723
terminal.Writer is now just a wrapper around stdio.Stdout() without
any useful functionality. Replace it with stdio.Stdout() as an
io.Writer.
Test: ui/terminal/status_test.go
Change-Id: I5bc5476afdca950b505642f0135a3af9d37fbe24
Elliott Hughes