The droidstubs support in sdk/module_exports was a temporary measure
to work around the fact that some APIs were being defined by direct use
of droidstubs instead of java_sdk_library.
This change removes that support as those APIs have all been switched
from droidstubs to use java_sdk_library so droidstubs support is no
longer needed.
Bug: 168301990
Test: m nothing
Change-Id: I3517bed29b030438a0423a6cb8c248992a988222
Some java_sdk_library modules do not have any stubs for some API
scopes. That results in an empty ".srcjar" being created for them which
ends up not creating a directory for the stubs sources when that
snapshot is unzipped. Previously, that would cause a build failure as
the generated java_sdk_library_import module used the directory, which
did not exist, in its stub_srcs property.
This change switches the stubs_srcs property to use a glob pattern of
"**/*.java" relative to the directory instead of using the directory
directly. When the directory does not exist the glob pattern is
resolved to an empty set of paths and does not break the build.
Bug: 172811712
Test: Add sdkextensions-sdk sdk module (local patch)
m sdk-extensions (local patch)
unpack generated snapshot
m nothing - results in build failure due to missing directory
Make this change and repeat above except this time the build works.
Change-Id: I691ffbfdc01ba89bbcaf647dcbb7dfebc3c8aec2
Also fix //apex_available:platform that could get lost in the generated
apex_available properties. It only happened if a module didn't specify
an apex_available setting and then got extra entries from
apex.BaselineApexAvailable.
Test: Build ART SDK with libnativeloader_lazy in the SDK, and check
that the generated prebuilt module has //apex_available:platform
(before https://r.android.com/1480559).
Change-Id: I9df20aee63455932a7e558993f0f26769cb02792
This amends Idad7ef138cdbcbd209d390bf6c10ca8365d4619f. With the change,
when there is a member that returns IsHostOsDependent() == true,
the sdk having the member and the member itself are disable for host and
only the os that the member supports is explicitly enabled.
However, that change will cause a problem when we add the support for
the linux_bionic_arm64 target. The target is not enabled when building
sdk snapshots. The only linux_bionic target that is enabled is
'linux_bionic_x86_64'. However, since the granularity is os which is
linux_bionic, the snapshot is generated as follows.
cc_prebuilt_binary {
target: {
host: {
enabled: false,
},
linux_bionic: {
enabled: true,
},
linux_bionic_x86_64: {
srcs: ["x86_64/bin/..."],
},
// no srcs for linux_bionic_arm64
},
}
Above is a problem for linux_bionic_arm64 target because the target is
enabled (via linux_bionic.enabled: true), but srcs is not provided.
To fix the problem, the enabling of a target is done in a target
(os_arch) granularity, rather than os granularity. For example, above
now becomes ...
cc_prebuilt_binary {
target: {
host: {
enabled: false,
},
linux_bionic_x86_64: {
enabled: true,
srcs: ["x86_64/bin/..."],
},
},
}
Only the targets that the snapshot actually can provide srcs are enabled
and the rest of the host targets are disabled.
Bug: 159685774
Test: m nothing
Test: build/soong/scripts/build-aml-prebuilts.sh
runtime-module-host-exports
Change-Id: Ibca48c40f6dc4628b5f4bfa4ceb68ebe0973cc81
This reverts commit 323dc60712.
Reason for revert: Possible cause of test instability
Bug: 170513220
Test: soong tests
Change-Id: Iee168e9fbb4210569e6cffcc23e60d111403abb8
Putting t.Parallel() in each test makes them run in parallel.
Additional t.Parallel() could be added to each subtest, although
that requires making a local copy of the loop variable for
table driven tests.
Test: m checkbuild
Change-Id: I5d9869ead441093f4d7c5757f2447385333a95a4
Some mainline modules provide an `sdk` and one or more set of
module_exports. When the snapshots are unpacked into separate prebuilts
directories (one per snapshot) then any dependencies from a member of
one snapshot to a member of another may require the latter to have
additional visibility rules.
Previously, these rules had to be added to each source module. This
change allows additional visibility rules to be specified on the
sdk/module_exports that are added to all the prebuilts in its snapshot.
Bug: 155921753
Bug: 168301990
Test: m nothing
Change-Id: Ia3eacb5749981f04770ae9872a8013e43c5c6ef1
This change ensures that each prebuilt in a snapshot explicitly
specifies its visibility even when that visibility is the current
default. This is done for two reasons:
1. It simplifies a follow up change that adds visibility rules to an
existing set of rules.
2. It ensures that the snapshots are independent of the current Soong
default visibility.
The latter is important because we intend to switch from modules being
visible to everyone by default (i.e. //visibility:public) to only being
visible to modules in the same package (i.e. //visibility:private). By
making the snapshots of modules that do not specify any visibility
explicitly specify that they are "//visibility:public" it ensures that
the snapshots will not need to be changed when the default changes.
Bug: 168301990
Test: m nothing
Change-Id: Ia034f4a1e5124c17f46d73b0e9a6c5f2a251038e
This is a quick fix to avoid build failures due to prebuilts lacking
stubs versions that the sources have, which causes dependencies on
older version stubs fail on master-art-host where the sources of e.g.
Bionic are no longer available.
More work is required to make the version handling of stubs DTRT - a
TODO comment outlines it.
Test: m nothing
Test: `m runtime-module-sdk`, check that the generated Android.bp
has the full stubs.versions list like the sources.
Bug: 169373910
Change-Id: I0ebfaf94f9d45a0e58d9785c40e7cea626f0ab83
When generating Javadoc the processor needs to be given information
about the doctags that are present in the source. This change allows
that information to be managed with the java_sdk_library that generates
the stubs source from which the Javadoc is generated.
Bug: 168301990
Test: Built offline-sdk-docs with and without the change and
diffed them. The only difference was the timestamp.js
file.
Change-Id: I4adbeb0781bc2191461fec856ffa90ea185e7434
liblog snapshot needs to sanitizer.address=false to avoid cycle in asan
builds. Adding that separately in library_sdk_member.go would start to
feel like whack-a-mole, so the snapshot generation is instead extended
to handle nested property structs.
This uses the BpPropertySet.AddProperty extension in
https://r.android.com/1423510, and common value optimisation now
recurses into non-anonymous structs, instead of comparing them as a
whole.
Test: m nothing
Test: `m SANITIZE_TARGET=address nothing` with prebuilts/runtime
present in the manifest and a fresh snapshot made with this
Bug: 151303681
Change-Id: I472554117a488e6c800045cb2ed59377778571a4
Both will create a nested property set, that may be merged with an
existing one.
Test: m nothing
Bug: 151303681
Change-Id: I30696ba3eb8960ca6fa54c9ee2cf6229ab9f5da9
A host target is considered as being cross-compiled when the target
can't run natively on the build machine. For example, linux_glibc/x86_64
is a non-cross target on a standard x86/Linux machine, but is a cross
host on Mac. Previously, whether cross or not was a static attribute of
an OsType. For example, Windows was always considered as cross host,
while linux_bionic was not. This becomes a problem when we support more
host targets like linux_bionic/arm64 which should be cross-host on
standard x86/Linux machines.
This change removes HostCross from the OsClass type and instead adds a
property HostCross to the Target type. When a target is being added, it
is initialized to true when the target can't run natively on the current
build machine.
Bug: 168086242
Test: m
Change-Id: Ic37c8db918873ddf324c86b12b5412952b0f2be2
Needed for jni_headers which is marked as recovery_available because libchrome
is also marked and that library is used by others that are the recovery
partition. There may be other dependency paths that require jni_headers to be
recovery_available that was just the first one found.
Bug: 168301990
Test: m nothing
Change-Id: I916ecfe7700b9c153b29115e849da148fc7e7a76
The naming_scheme property was not removed as it may be useful for
future when migrating to java_sdk_library.
Bug: 168301990
Test: m nothing
Change-Id: Ie97dd60355a207f1312a2dd910f1fb25b46fd737
This is necessary to not get dependencies on libclang_rt sanitizer libs
for the CRT objects which lead to cyclic dependencies in sanitizer
builds.
Test: `lunch aosp_blueline_hwasan-userdebug && m nothing`
in a tree that has the prebuilts created and unzipped from
`build/soong/scripts/build-aml-prebuilts.sh runtime-module-{sdk,host-exports}`
Bug: 151303681
Change-Id: I3f848a084280bdc3ade4b74df03e981d8cc61222
Add a -r argument to soong_zip that reads a list of files from a file
like the -l argument but treats it as a Ninja rsp file with escaping.
Replace the -l arguments in Soong that are using rsp files with -r.
Fixes: 162435077
Test: TestReadRespFile, TestZip
Change-Id: I4605312e99406ab1bd0c37af9c5ad212393f0403
APEX variants that share the same SDK version and updatability
almost always use identical command line arguments to build but
with different intermediates directories. This causes unnecessary
build time and disk space for duplicated work.
Deduplicate APEX variants that would build identically. Create
aliases from the per-APEX variations to the new shared variations
so that the APEX modules can continue to depend on them via the
APEX name as the variation.
This has one significant change in behavior. Before this change,
if an APEX had two libraries in its direct dependencies and one
of those libraries depended on the other, and the second library
had stubs, then the first library would depend on the implementation
of the second library and not the stubs. After this change, if
the first library is also present in a second APEX but the second
library is not, then the common variant shared between the two
APEXes would use the stubs, not the implementation.
In a correctly configured set of build rules this change will
be irrelevant, because if the compilation worked for the second
APEX using stubs then it will work for the common variant using
stubs. However, if an incorrect change to the build rules is
made this could lead to confusing errors, as a previously-working
common variant could suddenly stop building when a module is added
to a new APEX without its dependencies that require implementation
APIs to compile.
This change reduces the number of modules in an AOSP arm64-userdebug
build by 3% (52242 to 50586), reduces the number of variants of the
libcutils module from 74 to 53, and reduces the number of variants
of the massive libart[d] modules from 44 to 32.
This relands I0529837476a253c32b3dfb98dcccf107427c742c with a fix
to always mark permissions XML files of java_sdk_library modules as
unique per apex since they contain the APEX filename, and a fix
to UpdateUniqueApexVariationsForDeps to check ApexInfo.InApexes
instead of DepIsInSameApex to check if two modules are in the same
apex to account for a module that depends on another in a way that
doesn't normally include the dependency in the APEX (e.g. a libs
property), but the dependency is directly included in the APEX.
Bug: 164216768
Test: go test ./build/soong/apex/...
Change-Id: I2ae170601f764e5b88d0be2e0e6adc84e3a4d9cc
APEX variants that share the same SDK version and updatability
almost always use identical command line arguments to build but
with different intermediates directories. This causes unnecessary
build time and disk space for duplicated work.
Deduplicate APEX variants that would build identically. Create
aliases from the per-APEX variations to the new shared variations
so that the APEX modules can continue to depend on them via the
APEX name as the variation.
This has one significant change in behavior. Before this change,
if an APEX had two libraries in its direct dependencies and one
of those libraries depended on the other, and the second library
had stubs, then the first library would depend on the implementation
of the second library and not the stubs. After this change, if
the first library is also present in a second APEX but the second
library is not, then the common variant shared between the two
APEXes would use the stubs, not the implementation.
In a correctly configured set of build rules this change will
be irrelevant, because if the compilation worked for the second
APEX using stubs then it will work for the common variant using
stubs. However, if an incorrect change to the build rules is
made this could lead to confusing errors, as a previously-working
common variant could suddenly stop building when a module is added
to a new APEX without its dependencies that require implementation
APIs to compile.
This change reduces the number of modules in an AOSP arm64-userdebug
build by 3% (52242 to 50586), reduces the number of variants of the
libcutils module from 74 to 53, and reduces the number of variants
of the massive libart[d] modules from 44 to 32.
Bug: 164216768
Test: go test ./build/soong/apex/...
Change-Id: I0529837476a253c32b3dfb98dcccf107427c742c
Necessary to avoid problems with implicitly enabled host OS'es, e.g.
linux_glibc getting enabled when we only supply a linux_bionic linker
in runtime-module-host-exports. That will then cause a non-functional
prebuilt to take precedence over source if the prebuilt is preferred.
We don't do this for device since we so far only support a single
device OS (android).
This introduces the notion that SDK member types can be host OS
dependent or not. That way java members with host prebuilts don't get
restricted to a specific host OS.
Test: m nothing
Test: build/soong/scripts/build-aml-prebuilts.sh runtime-module-host-exports
Check that the generated Android.bp correctly disables the bionic
linker prebuilt for linux_glibc.
Test: art/build/apex/runtests.sh
on master-art with an updated runtime SDK snapshot
Test: art/tools/buildbot-build.sh {--host,--target}
on master-art with an updated runtime SDK snapshot
Bug: 160349757
Change-Id: Idad7ef138cdbcbd209d390bf6c10ca8365d4619f
Previously, the prebuilt mutators were added by the
cc.RegisterRequiredBuildComponentsForTest() function as a convenience
but unfortunately it lead to some of the mutators being in a different
order in the tests than in the normal build.
This change:
* Extracts the RegisterPrebuiltMutators() call from
cc.RegisterRequiredBuildComponentsForTest()
* Makes sure that the prebuilt mutators are registered before the
visibility gatherer and enforcer mutators.
Bug: 162505935
Test: m nothing
Change-Id: I7d959b558200b502f0a5e4653c41ea01414e142a
Previously, an APEX variant was created for a module that was a member
of an SDK just in case it had to be replaced with an APEX requested
snapshotted version of that member. That was necessary because that was
the only way to have APEX specific replacements.
Since then a new method called ReplaceDependenciesIf() has been added
which provides fine grained control over which dependencies are
replaced. This change uses that new method to handle the replacements
which allows the APEX variants to be removed.
Bug: 161928524
Test: m nothing
Change-Id: If3869dd6753dc182b099af566b20fbc9c9c6eff7
This change silently decides whether modules which depend on either
sdkPrivate or sdkCorePlatform get the legacy or the stable version of
the core/platform API, based on whether the module's name is on a
hard-coded list or not.
Test: m java
Test: make a target from the list when its entry is commented out, which correctly fails
Bug: 157640067
Change-Id: I15e5a6c2f07e73718803501d705de0d7ab9bec90
Merged-In: I15e5a6c2f07e73718803501d705de0d7ab9bec90
Merged-In: Iaa97ddaa015e8079fcb3426585c5101c7ec9e22a
(cherry picked from commit c0f4373106)
Previously, due to limitations in metalava the module lib API and stubs
source were generated separately. That limitation has since been
removed so this change optimizes the generating code.
Changes:
* Add an annotation field to apiScope to contain the annotation that
identifies the scope.
* Rename droidstubArgs to extraArgs to better reflect that they are not
passed to droidstubs.
* Rename droidstubsArgsForGeneratingStubsSource to droidstubsArgs.
* Remove droidstubsArgsForGeneratingApi and
createStubsSourceAndApiTogether fields along with code that supports
generating stubs source and the API separately.
* Fix the module lib test.
Test: m checkapi
Bug: 161364853
Change-Id: I821886bb68645addf5ae9c96ed2f4f3649151d1a
Previously compile_multilib was ignored for device and defaulted to
"both", which could lead to an internal inconsistency in the snapshot
if a member was 32- or 64-only.
This also implements common property optimisation for compile_multilib,
by adding a struct that can be extended to other properties in the
future.
Test: m nothing
Bug: 151303681
Change-Id: I3e96222858e5e755173aca03508a23c431977e2a
There was a special case in cc_prebuilt_binary only, which resulted in
prebuilt libraries getting both 32 and 64 bit variants even when their
sources only had one of them, and the other variant would be defunct
since it wouldn't get any prebuilt artefact.
This moves the handling of compile_multilib completely to the common
update code, so that SDK members don't need to deal with it. It doesn't
take SDK member defaults into account, which means a bit more
boilerplate in the snapshots, but it's simpler and less error prone
(different SDK member types have different defaults).
This relands https://r.android.com/1359962 after disabling the SDK
tests on mac once and for all.
Bug: 151303681
Test: `go test -v ./sdk` in build/soong on mac and linux
Change-Id: I05f6603b2ac9b8676b25c3e297165ca23284e9cc
Break apart test helpers a bit to make it possible to enable
LinuxBionic in a single test, and add LinuxBionic support to
cc.GatherRequiredDepsForTest.
Test: m nothing
Bug: 160349757
Change-Id: Iace1024c964cee2308c130c945daef9e46c18c66
We frequently miss putting in the per-test skip condition, and since
mac isn't tested in presubmit this leads to build breakages and time
consuming reverts. To avoid that this blanket disables all the SDK
tests on mac. It's not used there and we got test coverage in many
linux-based builds.
Bug: 145598135
Bug: 161315642
Test: `go test -v ./sdk` in build/soong on mac and linux
Change-Id: I2aea92fef2c0f8c2742396fe36610501dc5a6f0f
There was a special case in cc_prebuilt_binary only, which resulted in
prebuilt libraries getting both 32 and 64 bit variants even when their
sources only had one of them, and the other variant would be defunct
since it wouldn't get any prebuilt artefact.
This moves the handling of compile_multilib completely to the common
update code, so that SDK members don't need to deal with it. It doesn't
take SDK member defaults into account, which means a bit more
boilerplate in the snapshots, but it's simpler and less error prone
(different SDK member types have different defaults).
Bug: 151303681
Test: m nothing
Test: build/soong/scripts/build-aml-prebuilts.sh art-module-host-exports
Check that the generated Android.bp passes Soong.
Change-Id: Ib73444c6788ee1c78480bdb103aa2b8ae8f2c63c
Fix an error caught by golint that prevents using go test. string(int)
produces a rune, not a string representation of the int. Use fmt.Errorf
instead to format the string.
Test: go test
Change-Id: I4c2e1e30a0f1b3dc24afd123c38c4e41c2abb47a
Previously, preferring a prebuilt of an sdk/module_exports's member
would cause the sdk/module_exports to depend on the prebuilt instead
of the source and cause problems with the build.
This chance prevents the dependency from an sdk/module_exports to its
members from being replaced with prebuilts.
Bug: 160785918
Test: m nothing
Change-Id: Iee4bcd438c11929e30fb5766701b05a0e89956d9
* changes:
Prepend default to allow overriding in the bp file.
Do not follow SDK member dependencies for APEX payloads.
Do not follow prebuiltDependencyTags in APEX payload walks.
Previously, java_sdk_library_import added the dependencies on its child
components in the deps mutator after prebuilts without a matching
source module are renamed to the source module name. That meant that
the java_sdk_library_import has to use the source module name and ended
up depending on the source module unless it was preferred.
This change adds a new component deps mutator that runs before the
PrebuiltRenameMutator so that the java_sdk_library_import can add
dependencies onto the prebuilt modules. It also updates an affected
test.
Bug: 159902351
Test: m nothing
Change-Id: I3576c4873302743e51aff547ea1497bef6d748ac
Test: m nothing
Test: `m` with prebuilts/runtime in the manifest (along with other
fixes)
Bug: 151303681
Change-Id: I450d476975c7ab4434228b8c4baf3af192142211
This CL adds "dists" to the base property struct to support multiple
dist file configurations, and generic tag support to dist tagged outputs
of modules.
Fixes: b/152834186
Test: soong tests and `m sdk dist`
Change-Id: I80c86bc9b7b09e671f640a4480c45d438bdd9a2a
Signed-off-by: Jingwen Chen <jingwen@google.com>
Test: m nothing
Test: Check on go/Android.bp that cc_prebuilt_library supports
unique_host_soname
Bug: 158743135
Change-Id: Ie02a5cae057fb9092c226d8c5b7f63e1f66ad066
Previously, the code copied the current.txt file to both the
current_api and removed_api properties. This change copies the
removed.txt file to the removed_api property instead.
Bug: 157980685
Test: m nothing
Change-Id: Iad34e91051da43222d22c240c16f50887c43d73e
Give prebuilt_etc and sh_binary their own packages and split the
gigantic main Android.bp up to small, per-package ones.
Test: m nothing, TreeHugger
Bug: 156980228
Change-Id: I7b00cd344b9f16861f1ff39edf0029f016b853d0
The flags are necessary to avoid implicit dependencies on crt libs,
libc, and the linker (recursively). The reason cc_prebuilt_binary react
to these flags is that they can affect the install rules.
Test: m nothing
Test: art/test/testrunner/run_build_test_target.py art-linux-bionic-x64
on a master-art branch using snapshot built from runtime-module-sdk
and runtime-module-host-exports
Bug: 152255951
Change-Id: I6b2fe92d105d1f446fffd00bd3267a416f75efb7
Passes the shared_library property through to the snapshot. It does not
optimize away the default value in order to make it easier to invert
the default value in future. The current default value was only chosen
for convenience because most existing usages were already treated as
shared libraries. It would be safer if modules had to opt in to be used
as shared libraries.
Bug: 155164730
Test: m nothing
Change-Id: I33c7323f2389b44ed49cebe517ae2cce349117f1
Modules in a package is implicitly visible within the same package.
When making effective visibility rules which work from another location
that visibility needs to be mentioned explicitly. In practice this
allows prebuilts to remain visible to other modules in the source
package when the prebuilts are preferred.
Test: m nothing
Test: m conscrypt-module-sdk, check that the snapshot Soong modules give
visibility to //external/conscrypt
Bug: 151303681
Change-Id: I404f6e5ca7021974a8c7be5e4d6b4982c050b8a5
The module_lib scope should be called module-lib in order to pick up
the latest filegroup. Without it the API lint does not use a baseline
and so reports issues with released and unchangeable APIs.
It is also needed for the correct dist path.
Test: m update-api
Bug: 155164730
Change-Id: I7dbafd7164d5da600ca45c39a7f93a5a40027a1f
Allow the sdk_version against which the stubs for a scope are compiled
to be specified in the module on a per scope basis.
Bug: 155164730
Test: m nothing
Change-Id: I5881e5ee7c2169c30f544882344a60a602dae917
The API file for a scope represents the differences between the API
provided by that scope and that provided by the scope that it extends.
On the other hand the stubs source for a scope represents the union of
the API provided by the scope and the scope it extends (all the way
back to public).
Unfortunately, while metalava supports this behavior for scopes that
extend public (e.g. system and test) it does not support this behavior
for scopes that extend others, e.g. module_lib which extends system.
This is because it always assumes that the baseline for the API file
is 'public' and so has no way to defined other baselines.
This change works around that by having separate droidstubs modules to
generate the API and stubs sources for scopes that require different
arguments to generate the API and stubs sources.
Test: m checkapi
Bug: 155164730
Change-Id: Iea7d59852d7aeb503120acf3c44e08eb0d9d07b9
Checks the syntax of the Android.bp file generated for the sdk
snapshot. While this will not detect all possible problems with the
generated Android.bp file it will detect some and it is far better to
detect those issues during generation than when it is unpacked and
used.
Bug: 155628860
Test: m nothing
Change-Id: Ieec86a7a49fa2e3bd8b9f83aca540114232a3476
Previously, when writing to generatedContents \n characters were
quoted (replaced with \\n) so as to allow them to be preserved through
ninja/rsp/bash and were unquoted (replaced \\n with \n) just before
redirecting to the output file. That meant that any code which wanted
to access the contents for other purposes, e.g. testing had to unquote
\\n.
This change moves the quoting to be part of the code that generates the
ninja rule which simplifies any other code that has to access the
contents.
Without quoting the generated Android.bp files are not formatted
properly, are all on one line and completely unreadable.
Bug: 156286550
Test: m art-module-sdk and check generated Android.bp file to make sure
it is properly formatted.
Change-Id: I768c3b96ed08a3daf251730e2a10d9d72338c49a
Change since last attempt: Disable test that breaks on darwin.
Adds a test that fails with unknown property android.stubs.versions
and then fixes that by marking the field from which that property is
created with 'ignored-on-host' and implemented the isHostVariant on
*osTypeSpecificInfo.
Bug: 155628860
Test: m nothing
Change-Id: Ia4e744c9e799d5adaf8a2f761516f568ec363ad4
Adds a filter mechanism that can exclude property values from being
included in the common value extraction. That is needed to prevent the
snapshot mechanism from generating invalid output for properties that
are ignored on host (and have their values cleared) and which are not
tagged with `android:"arch_variant"`.
Changes:
* Updates the documentation of SdkMemberType to explain what effect
the 'ignored-on-host' tag has.
* Adds some tests for this new mechanism.
Bug: 155628860
Test: m nothing
Change-Id: Ibafdb6e921ba5abe505bd8a91ca5a1d9c9b5d0cb
Previously, the snapshot code did not know whether a specific property
could be arch specific or not and assumed that they all were which
meant that it could generate snapshots containing arch specific values
for properties that are not arch specific and so would fail when
unpacked.
This change requires arch specific fields in SdkMemberProperties to be
tagged as such using `android:"arch_variant"` (just as in module input
property structures). Any property without that must have properties
that are common across all variants.
Bug: 155628860
Test: m nothing
Change-Id: I3df60f0b53ba02ec2c55a80c7da058eac5909d26
* changes:
Revert "Detect invalid arch specific properties in snapshot"
Revert "Adds support for 'ignored-on-host'"
Revert "Fix snapshot of a host/device cc_library with stubs"
Revert submission 1302576
Bug: 156054601
Reason for revert: Presumed root cause of build break.
Reverted Changes:
Ifc8116e11:Detect invalid arch specific properties in snapsho...
I7ebd33307:Adds support for 'ignored-on-host'
I167b47a13:Fix snapshot of a host/device cc_library with stub...
Change-Id: Id7eba0bdde5c579e10e9b42d94a7cfab5f34995f
Revert submission 1302576
Bug: 156054601
Reason for revert: Presumed root cause of build break.
Reverted Changes:
Ifc8116e11:Detect invalid arch specific properties in snapsho...
I7ebd33307:Adds support for 'ignored-on-host'
I167b47a13:Fix snapshot of a host/device cc_library with stub...
Change-Id: I2a7ac0ef0232177eefc26542c11dc675d6f4cab2
Revert submission 1302576
Bug: 156054601
Reason for revert: Presumed root cause of build break.
Reverted Changes:
Ifc8116e11:Detect invalid arch specific properties in snapsho...
I7ebd33307:Adds support for 'ignored-on-host'
I167b47a13:Fix snapshot of a host/device cc_library with stub...
Change-Id: Ibccce5286605bb71c6be3b3550ba86d8b7e24fa7
Adds two new properties to specify the visibility of the stubs modules
(source and library) created by the java_sdk_library. Excludes
visibility property from being inherited when creating the module so it
can be properly specified by copying across the relevant property.
Test: m checkapi
Bug: 155164730
Change-Id: Iffdd9f191ff0d74646356ac577560cc38efdd790
Adds api scope for the module_lib and adds that to the list of all
all available scopes. The scope is generated if and only if the
api_surfaces property contains "module_lib".
No other changes are needed as the generation of the APIs is completely
driven by the allApiScopes array and the information in its contained
apiScope structures.
Test: m checkapi
Bug: 155164730
Change-Id: I7769af6823badca8715a270f86cf53b4e954b7df
Adds a per scope set of properties that allows explicit control over
the API surfaces generated.
Previously, the term active was used to determine whether it was
generated but that was a little abstract and unclear so has been
replaced by generated.
Test: m nothing
Bug: 155164730
Change-Id: I7539d89618b61f6b9d1a4b60cc3f9614b157f0d9
Adds a test that fails with unknown property android.stubs.versions
and then fixes that by marking the field from which that property is
created with 'ignored-on-host' and implemented the isHostVariant on
*osTypeSpecificInfo.
Bug: 155628860
Test: m nothing
Change-Id: I167b47a1374f541aa09d7e045972d740f1d9009c
Adds a filter mechanism that can exclude property values from being
included in the common value extraction. That is needed to prevent the
snapshot mechanism from generating invalid output for properties that
are ignored on host (and have their values cleared) and which are not
tagged with `android:"arch_variant"`.
Changes:
* Updates the documentation of SdkMemberType to explain what effect
the 'ignored-on-host' tag has.
* Adds some tests for this new mechanism.
Bug: 155628860
Test: m nothing
Change-Id: I7ebd333079619dba546bc8c4911d567e0287b676
Previously, the snapshot code did not know whether a specific property
could be arch specific or not and assumed that they all were which
meant that it could generate snapshots containing arch specific values
for properties that are not arch specific and so would fail when
unpacked.
This change requires arch specific fields in SdkMemberProperties to be
tagged as such using `android:"arch_variant"` (just as in module input
property structures). Any property without that must have properties
that are common across all variants.
Bug: 155628860
Test: m nothing
Change-Id: Ifc8116e11d987cfe7aec2eeaa964f3bbf36b5dc2
Refactoring in preparation for follow up changes.
Also:
* Adds a new AssertErrorMessageEquals() helper method.
* Improved error reporting in the accessor and added name to
extractorProperty to ensure meaningful errors are reported.
* Added String() string method to propertiesContainer.
* Reports errors using the field name as the errors are not really
fixable by developers and it is more meaningful to the build team.
Bug: 155628860
Test: m nothing
Change-Id: I5c5b8436bcbc39e4e7cd35df2577b2dac53e702a
Refactors the existing code to wrap a getter with a structure in order
to simplify adding additional per-property information. Adds an
emptyValue field to contain the empty value appropriate for the field
type.
Bug: 155628860
Test: m nothing
Change-Id: I7e169bd9b6e51b88e35bdf8673a5056337f778c1
This allows additional metadata to be associated with a set of
properties that will be used in a follow up change to filter
properties that are ignored in some variants (e.g. host variants).
Bug: 155628860
Test: m nothing
Change-Id: Ie83c1ffbb71fd5d7a08d350571dad3e3209b1431
This change fixes an issue with the definition of the
android_stubs_current (and similar) modules in the sdk tests. They were
incorrectly defined as java_sdk_library_import and not java_import.
Test: m nothing
Bug: 155164730
Change-Id: I4e9bfebdd2ff0a374e12284ccdf5ee5518968969
Test: m nothing
Test: Build an SDK snapshot including libc, check that the generated
cc_prebuilt_library_shared for it is a stub that doesn't depend on
ld-android.
Bug: 152255951
Bug: 154310674
Change-Id: Ie5ec02aebdf00b75756a6eda40db821488d30065
Minor refactoring of checkMergeZip(string) -> checkMergeZips(...string)
to allow testing of multiple merge zips.
Bug: 153443117
Test: m nothing
Change-Id: I8db00f611ced15f8476ba16f2834a72e8c913596
Previously, adding java_library to an sdk required that the names of
any APEXes that transitively compiled against it were added to its
apex_available property. This change removes that requirement.
Also corrects the dependency path in the TestApexAvailable_IndirectDep
error which previously passed through "shared from static" static
dependency tags even though those are explicitly NOT followed when
checking apex_available settings.
Bug: 152878661
Test: m droid
Change-Id: I995ed38956c1bc210b09494812de012fed9f9232
Paul Duffin