Hiddenapi processing currently requires access to the class
implementation jars for libraries on the bootclasspath which means that
they need to be provided as part of the prebuilts. This change modifies
the java_boot_libs property on the sdk to make those files available.
Modularization of the hiddenapi processing will hopefully remove the
need for these to be exported so this should be temporary.
Bug: 178361284
Test: m art-module-sdk
check generated snapshot zip contains implementation jars
Change-Id: I9e94662dddb0ddb85a477ae6d27e533085147e88
The build has some implicit dependencies (via the boot jars
configuration) on a number of modules, e.g. core-oj, apache-xml, that
are part of the java boot class path and which are provided by mainline
modules (e.g. art, conscrypt, runtime-i18n) but which are not otherwise
used outside those mainline modules.
As they are not needed outside the mainline modules adding them to
the sdk/module-exports as either java_libs, or java_header_libs would
end up exporting more information than was strictly necessary. This
change adds the java_boot_libs property to allow those modules to be
exported as part of the sdk/module_exports without exposing any
unnecessary information.
Some points to note:
* The java_import has to have a valid file for the src property
otherwise it will be disabled.
* The src property is supposed to reference a jar file but the
java_boot_libs property will make it reference an empty file (not
an empty jar) so that any attempt to use that file as a jar, e.g.
compiling against it, will cause a build failure.
* The name of the file passed to the src property should make it
clear that the file is not intended to be used.
* The test makes sure that only the jar file is copied to the
snapshot.
Test: m nothing
Bug: 171061220
Change-Id: I175331e4c8e3874ab70a67cdc2f76ed1576e41eb
Both will create a nested property set, that may be merged with an
existing one.
Test: m nothing
Bug: 151303681
Change-Id: I30696ba3eb8960ca6fa54c9ee2cf6229ab9f5da9
Necessary to avoid problems with implicitly enabled host OS'es, e.g.
linux_glibc getting enabled when we only supply a linux_bionic linker
in runtime-module-host-exports. That will then cause a non-functional
prebuilt to take precedence over source if the prebuilt is preferred.
We don't do this for device since we so far only support a single
device OS (android).
This introduces the notion that SDK member types can be host OS
dependent or not. That way java members with host prebuilts don't get
restricted to a specific host OS.
Test: m nothing
Test: build/soong/scripts/build-aml-prebuilts.sh runtime-module-host-exports
Check that the generated Android.bp correctly disables the bionic
linker prebuilt for linux_glibc.
Test: art/build/apex/runtests.sh
on master-art with an updated runtime SDK snapshot
Test: art/tools/buildbot-build.sh {--host,--target}
on master-art with an updated runtime SDK snapshot
Bug: 160349757
Change-Id: Idad7ef138cdbcbd209d390bf6c10ca8365d4619f
Previously, it was not possible to navigate directly from the interface
methods in SdkAware to the implementations in SdkBase as the former
embeds android.Module but the latter did not implement those methods
and so did not implement SdkAware. Finding the implementation of those
methods required explicitly searching for them.
This change extracts sdkAwareWithoutModule interface to allow use of
the IDE capability to navigate directly to implementations of an
interface method.
Test: m nothing
Change-Id: I0cd25180ea0081a54681b58e3202ff9491563131
There was a special case in cc_prebuilt_binary only, which resulted in
prebuilt libraries getting both 32 and 64 bit variants even when their
sources only had one of them, and the other variant would be defunct
since it wouldn't get any prebuilt artefact.
This moves the handling of compile_multilib completely to the common
update code, so that SDK members don't need to deal with it. It doesn't
take SDK member defaults into account, which means a bit more
boilerplate in the snapshots, but it's simpler and less error prone
(different SDK member types have different defaults).
This relands https://r.android.com/1359962 after disabling the SDK
tests on mac once and for all.
Bug: 151303681
Test: `go test -v ./sdk` in build/soong on mac and linux
Change-Id: I05f6603b2ac9b8676b25c3e297165ca23284e9cc
There was a special case in cc_prebuilt_binary only, which resulted in
prebuilt libraries getting both 32 and 64 bit variants even when their
sources only had one of them, and the other variant would be defunct
since it wouldn't get any prebuilt artefact.
This moves the handling of compile_multilib completely to the common
update code, so that SDK members don't need to deal with it. It doesn't
take SDK member defaults into account, which means a bit more
boilerplate in the snapshots, but it's simpler and less error prone
(different SDK member types have different defaults).
Bug: 151303681
Test: m nothing
Test: build/soong/scripts/build-aml-prebuilts.sh art-module-host-exports
Check that the generated Android.bp passes Soong.
Change-Id: Ib73444c6788ee1c78480bdb103aa2b8ae8f2c63c
Previously, preferring a prebuilt of an sdk/module_exports's member
would cause the sdk/module_exports to depend on the prebuilt instead
of the source and cause problems with the build.
This chance prevents the dependency from an sdk/module_exports to its
members from being replaced with prebuilts.
Bug: 160785918
Test: m nothing
Change-Id: Iee4bcd438c11929e30fb5766701b05a0e89956d9
Adds a filter mechanism that can exclude property values from being
included in the common value extraction. That is needed to prevent the
snapshot mechanism from generating invalid output for properties that
are ignored on host (and have their values cleared) and which are not
tagged with `android:"arch_variant"`.
Changes:
* Updates the documentation of SdkMemberType to explain what effect
the 'ignored-on-host' tag has.
* Adds some tests for this new mechanism.
Bug: 155628860
Test: m nothing
Change-Id: Ibafdb6e921ba5abe505bd8a91ca5a1d9c9b5d0cb
Previously, the snapshot code did not know whether a specific property
could be arch specific or not and assumed that they all were which
meant that it could generate snapshots containing arch specific values
for properties that are not arch specific and so would fail when
unpacked.
This change requires arch specific fields in SdkMemberProperties to be
tagged as such using `android:"arch_variant"` (just as in module input
property structures). Any property without that must have properties
that are common across all variants.
Bug: 155628860
Test: m nothing
Change-Id: I3df60f0b53ba02ec2c55a80c7da058eac5909d26
Revert submission 1302576
Bug: 156054601
Reason for revert: Presumed root cause of build break.
Reverted Changes:
Ifc8116e11:Detect invalid arch specific properties in snapsho...
I7ebd33307:Adds support for 'ignored-on-host'
I167b47a13:Fix snapshot of a host/device cc_library with stub...
Change-Id: Id7eba0bdde5c579e10e9b42d94a7cfab5f34995f
Revert submission 1302576
Bug: 156054601
Reason for revert: Presumed root cause of build break.
Reverted Changes:
Ifc8116e11:Detect invalid arch specific properties in snapsho...
I7ebd33307:Adds support for 'ignored-on-host'
I167b47a13:Fix snapshot of a host/device cc_library with stub...
Change-Id: I2a7ac0ef0232177eefc26542c11dc675d6f4cab2
Adds a filter mechanism that can exclude property values from being
included in the common value extraction. That is needed to prevent the
snapshot mechanism from generating invalid output for properties that
are ignored on host (and have their values cleared) and which are not
tagged with `android:"arch_variant"`.
Changes:
* Updates the documentation of SdkMemberType to explain what effect
the 'ignored-on-host' tag has.
* Adds some tests for this new mechanism.
Bug: 155628860
Test: m nothing
Change-Id: I7ebd333079619dba546bc8c4911d567e0287b676
Previously, the snapshot code did not know whether a specific property
could be arch specific or not and assumed that they all were which
meant that it could generate snapshots containing arch specific values
for properties that are not arch specific and so would fail when
unpacked.
This change requires arch specific fields in SdkMemberProperties to be
tagged as such using `android:"arch_variant"` (just as in module input
property structures). Any property without that must have properties
that are common across all variants.
Bug: 155628860
Test: m nothing
Change-Id: Ifc8116e11d987cfe7aec2eeaa964f3bbf36b5dc2
The DepIsInSameApex() and RequiredSdks() methods were defined in a few
places to avoid having to depend on the whole ApexModule/SdkAware
interfaces directly. However, that has a couple of issues:
1) It duplicates functionality making it difficult to change, changes
to the definitions outside the main interfaces do not cause compile
time failures, instead they result in a runtime change in behavior
which can be difficult to debug.
2) IDE navigation (specifically in Intellij) does not detect that the
duplicate definitions can resolve to the definitions in the main
interface.
This change extracts the methods into their own interfaces and reuses
those interfaces instead of duplicating the methods to fix both of
these issues.
Bug: 152878661
Test: m nothing
Change-Id: I0cfdf342a14eb0bfb82b1bd17e0633d81c7facfb
Migrates system modules and droid stubs over to use the new API for
creating the snapshot modules and removes the old API.
Test: m nothing
Change-Id: Ia825767f1f7ee77f68cfe00f53e09e6f6bfa027f
Previously, java snapshot properties (java_library and java_test)
relied on the properties not being optimized when there was a single os
type and instead being added directly to the common os type properties.
However, that means that the behavior is inconsistent for other member
types depending on whether there was one os type or not.
This change updates the java sdk member handling to support
optimization. This involved:
1) Adding AidlIncludeDirs field to librarySdkMemberProperties to
specify the aidl include dirs instead of extracting that from the
library field.
2) Renaming jarToExport to JarToExport (in both
library/testSdkMemberProperties)to allow it to be optimized.
3) Adding MemberType() and Name() methods to SdkMemberPropertiesContext
to avoid having to store the former in the properties struct and
retrieve the latter from the library/test fields.
4) Removing the now unused library/test fields from the properties
structures.
5) Separating the processing of the jar/test config in
AddToPropertySet(...) as they may be optimized separately.
6) Ditto for the jar/aidl include dirs.
7) While doing this work I noticed that although the contents of the
aidl include dirs are copied into the snapshot the java_import does
not make use of them. Raised bug 151933053 and added TODO to track
that work.
Bug: 142935992
Test: m nothing
Change-Id: Iba9799e111ca5672b2133568163d8c49837ba9cd
Previously passing additional information to the implementations of
AddPrebuiltModule() or the SdkMemberProperties interface would have
required making changes to the API. This change added an
SdkMemberContext object into which additional information can easily
be added without requiring changes to existing implementations.
The BuildSnapshot() method was not modified because it is deprecated
and will be removed in a follow up change.
It also switches the API from passing variants as android.SdkAware to
android.Module. That is for a couple of reasons:
1) SdkAware is designed for managing the relationship between the
module and the SDK, not for generating the output snapshot. As such
there is nothing in SdkAware that is needed for generating the
output snapshot.
2) Accepting android.Module instead makes it easier to use the
underlying code for generating the snapshot module as well as the
individual member modules.
This is in preparation for a number of improvements and bug fixes in
both the snapshot creation code and implementations to address found
while trying to built the platform against ART prebuilts.
Bug: 151937654
Test: m nothing
Change-Id: Iac10f1200c0f283aa35402167eec8f9aeb65a38e
Test: m nothing
Test: Add
sdk {
name: "runtime-module-sdk",
native_shared_libs: [
"libc",
"libdl",
"libm",
"ld-android",
],
native_objects: [
"crtbegin_dynamic",
"crtbegin_static",
"crtend_android",
],
}
to bionic/apex/Android.bp. Then:
build/soong/scripts/build-aml-prebuilts.sh runtime-module-sdk
Take the generated runtime-module-sdk-current.zip and unzip into a
master-art tree without bionic/, edit the generated Android.bp to
extend cc_prebuilt_* modules with:
nocrt: true,
stl: "none",
system_shared_libs: [],
apex_available: ["//apex_available:anyapex"],
recovery_available: true,
vendor_available: true,
ramdisk_available: true,
Then "m com.android.art.debug". This passes Soong but fails in the
build step because more members are required.
Bug: 148934017
Change-Id: I2ab8f6aadb1440b325697cae4a8ed761c62d15d2
This was only being used to set the "stl" property for cc library sdk
member type and so that functionality was moved to AddPrebuiltModule()
and FinalizeModule was removed.
Required a few test changes to move the property to the correct
position in the generated module.
Bug: 142918168
Test: m nothing
Change-Id: If6400189833d4ff3285e7a7adf63a9b509e2a03b
This change ensures that the runtime dependencies between a
binary/shared library are correctly specified in the snapshot so that
the build can ensure that shared libraries are built before the targets
that use them.
It adds support for differentiating between references that are
required to refer to another sdk member (required) and those that may
refer to either an sdk member or a non-sdk member (optional). The
latter is used for shared library references as the libraries used by
an sdk member may be provided from outside the sdk. e.g. liblog is not
part of the ART module but is used by some members of the ART sdk.
Bug: 142935992
Test: m nothing
Change-Id: Ia8509ffe79b208c23beba1880fe9c8a92b732685
This change also added support for excluding properties from common
value extraction by using a struct tag of `sdk:"keep"` That was needed
to prevent the fields in SdkMemberPropertiesBase from having their
values cleared.
The purpose of this change is to make it easier to share functionality
across sdk member types.
Bug: 142935992
Test: m nothing
Change-Id: Ie5160a8f854056920e411801ca20721eab7c8578
Updates the member snapshot creation code to support multiple os types.
It basically sorts the variants by os type, then applies the code to
optimize the arch properties and then it optimizes the properties that
are common across architectures and extracts any properties that are
common across os types.
The java and cc member types needed to be modified to make the location
of the generated files within the snapshot os type dependent when there
is more than one os type. That was done by adding an OsPrefix() method
to the SdkMemberPropertiesBase which returns the os prefix to use when
there is > 1 os type and otherwise returns an empty string.
Added three tests, one for cc shared libraries, one for cc binary and
one for java header libraries.
Bug: 150451422
Test: m nothing
Change-Id: I08f5fbdd7852b06c9a9a2f1cfdc364338a3d5bac
Generalize the processing of arch specific properties to reduce
duplication in snapshot module creation and simplify addition of
support for handling multiple os types.
Supporting multiple os types with the current method for building
snapshot modules would require every affected module type to add
support for it. Rather than duplicate multiple os type handling code
across those module types this work generalizes the process cc modules
use for handling arch types as it can be used as a basis for handling
multiple os types. Migrating module types over to this new process
will insulate them from having to handle multiple os types.
OB
SdkMemberType changes:
* BuildSnapshot is deprecated in favour of the new AddPrebuiltModule()
method.
* Additional methods, CreateVariantPropertiesStruct() and
FinalizeModule() are added.
* A new interface SdkMemberProperties, is defined that handles
extracting information from the variant (prior to common value
optimization) and adding properties to a property set.
The sdk module type uses these new methods and types to delegate the
member type specific processing to the relevant member types while
handling the behavior that is common across all members types, e.g.
extracting common values across multiple architectures. A future change
will leverage this processing to add support for multiple os types.
This change also refactors the cc module processing to use the new
process.
Bug: 150451422
Test: m nothing
Change-Id: If6ab2498407b17f50391d062cd9afc01b5e01af4
Adds an SdkMemberType implementation for java_system_modules. It
specifies that java_system_modules can be used with sdk as well as
module_exports, and also that the libs property should be included
as transitive members in the sdk.
It also adds support for treating appropriate tagged properties in
the snapshot prebuilts module as references to sdk members so that
they are correctly transformed when creating the versioned modules.
Bug: 142940300
Test: m nothing
Change-Id: Ic10b5a6d5b92b6018334fe876f06feaf79cc55e9
Allow an sdk member type to treat some of its dependencies as being
members of the sdk.
Needed for the java_system_modules type whose libs property are an
implementation detail of the system module and so should not be
explicitly listed in the sdk module but still have to be included in
the sdk snapshot.
Bug: 142940300
Test: m nothing
Change-Id: I90f37dae269ef64a6fe9debd0bbaf29a64dd74d8
Moves the struct to android/sdk.go and abstracts it behind a factory
method and interface. That allows it to be used outside the sdk
package.
This change is in preparation for adding support for module types that
have transitive sdk members.
Bug: 142940300
Test: m nothing
Change-Id: I71e5e0adf839b28a3a0952f82637637887f02688
This is preparation for enhancing the versioning tranformer to support
applying per property transformations. Specifically, to allow
properties to reference other libraries within the sdk.
Bug: 142940300
Test: m nothing
Change-Id: I99cdff4b407763ed395ff358d8110a63c6cf5589
By default SdkMemberTypes are only supported on module_exports module
type. Support for sdk module type has to be explicitly specified.
The java_header_libs, native_shared_libs and stubs_sources are
supported on sdk. The latter is required to provide the stubs source
for an API specified in java_header_libs as they should be kept in
sync.
Bug: 146341462
Test: m nothing
Change-Id: I19b9e60792780a797458d4a9e489506602b13144
Previously, adding a new SdkMemberType would require adding a new
sdkMemberListProperty instance to the sdkMemberListProperties as well
as adding a new property into the sdkProperties struct. They are
potential sources of conflict and couple the sdk code with all the
packages that add members to it. This change switched to a
registration model that allows each package to register its sdk
member types decoupling them from the sdk code.
Adds an SdkPropertyName() method to SdkMemberType that specifies the
name of the property to use in the sdk/sdk_snapshot. Also provides
an SdkMemberTypeBase struct to be used by providers of SdkMemberType
implementations.
SdkMemberType instances are registered using the
RegisterSdkMemberType() func which sorts the registered instances
by their SdkPropertyName() to ensure the behavior is consistent and
not affected by order of registration.
When creating a new sdk module a dynamicSdkMemberTypes instance is
created that contains the following:
* A properties struct is created dynamically that contains a field for
each registered SdkMemberType, corresponding to that type's
SdkPropertyName().
* A list of sdkMemberListProperty instances is also created, one for
each registered SdkMemberType.
The dynamicSdkMemberTypes instance is cached using a key that uniquely
identifies the set of registered types just in case new types are
registered after one has been created, e.g. by tests.
Bug: 142918168
Test: m checkbuild
Change-Id: I4bf2bf56a2a49025aa41454048bc1e8ccc6baca2
This is needed for a follow up change that makes sure that the
prebuilt modules have the same visibility as the source modules.
Bug: 143678475
Test: m conscrypt-module-sdk
Change-Id: I9461c8c094ab19ee9ececb5e5fd50565789f2fa2
Extracts the type specific functionality into the SdkMemberType
interface which has to be implemented by each module type that can
be added as a member of the sdk. It provides functionality to add
the required dependencies for the module type, check to see if a
resolved module is the correct instance and build the snapshot.
The latter was previously part of SdkAware but was moved because
it has to be able to process multiple SdkAware variants so delegating
it to a single instance did not make sense.
The custom code for handling each member type specific property,
e.g. java_libs, has been replaced with common code that processes
a list of sdkMemberListProperty struct which associates the
property (name and getter) with the SdkMemberType and a special
DependencyTag which is passed to the SdkMemberType when it has to add
dependencies.
The DependencyTag contains a reference to the appropriate
sdkMemberListProperty which allows the resolved dependencies to be
grouped by type.
Previously, the dependency collection methods would ignore a module if
it was an unsupported type because they did not have a way of
determining which property it was initially listed in. That meant it
was possible to add say a droidstubs module to the java_libs property
(and because they had the same variants) it would work as if it was
added to the stubs_sources property. Or alternatively, a module of an
unsupported type could be added to any property and it would just be
ignored.
However, the DependencyTag provides information about which property
a resolved module was referenced in and so it can detect when the
resolved module is of the wrong type and report an error. That check
identified a bug in one of the tests where the sdk referenced a
java_import module (which is not allowed in an sdk) instead of a
java_library module (which is allowed). That test was fixed as part
of this.
A list of sdkMemberListProperty structs defines the member properties
supported by the sdk and are processed in order to ensure consistent
behaviour.
The resolved dependencies are grouped by type and each group is then
processed in defined order. Within each type dependencies are grouped
by name and encapsulated behind an SdkMember interface which includes
the name and the list of variants.
The Droidstubs and java.Library types can only support one variant and
will fail if given more.
The processing for the native_shared_libs property has been moved into
the cc/library.go file so the sdk package code should now have no type
specific information in it apart from what is if the list of
sdkMemberListProperty structs.
Bug: 143678475
Test: m conscrypt-module-sdk
Change-Id: I10203594d33dbf53441f655aff124f9ab3538d87
Having each module type generate the contents of the snapshot's .bp
file results in lots of duplicated code. This adds an intermediate
model for use by the module types and then generates the .bp file
contents from that.
This not only removes the duplicated formatting code but it also
allows consistent handling of shared properties such as name further
reducing duplication. It also makes it possible to duplicate the
versioned and unversioned prebuilt modules from the same model.
Extracts generatedContents from generatedFile to allow the contents
to be populated without creating an output file, for testing.
Cleans up unused code.
Bug: 143678475
Test: m nothing
Change-Id: If21b84db0ef3fdfb5dc11ea0973ce6cb73603ea3
Adds stubs_sources property to sdk and unzips the droidstubs srcjar
into the snapshot directory.
Adds an UnzipToSnapshot method to the SnapshotBuilder which creates
a rule that uses zip2zip to repackage the supplied zip content into a
temporary zip file that matches what the required snapshot structure.
e.g. if the supplied zip contains foo/Foo.java and that needs to be in
the snapshot directory java/foo/stubs then it will create a zip that
contains java/foo/stubs/foo/Foo.java.
The temporary zip that is the output of that rule is added to the
zipsToMerge field for merging later.
If the zipsToMerge is empty then the snapshot zip is created as
before. Otherwise, a temporary zip file is created. That is then
merged with the other zip files in zipsToMerge to create the final
snapshot zip.
Adds prebuilt_stubs_sources for use by the generated .bp module.
Bug: 143678475
Test: added conscrypt sdk module and attempted to build it
Change-Id: Ie274263af3a08e36a73c61c0dbf0c341fd6967e2
Creates a SnapshotBuilder and GeneratedSnapshotFile interfaces to allow
the java library snapshot work to be moved into the java package.
Test: m -j60 checkbuild
Change-Id: I857167616026149d5e85885621b53876b419ba9b
When an APEX is built with uses_sdks, any depedndency from the APEX to
the outside of the APEX should be from the SDKs that the APEX is built
against.
Bug: 138182343
Test: m
Change-Id: I1c2ffe8d28ccf648d928ea59652c2d0070bf10eb
`m <sdk_name>` generates two scripts each of which is use to update the
current snapshot of the SDK and to freeze ToT as a new version,
respectively. Executing the scripts will copy necessary files (stub
libraries, AIDL files, etc.) along with Android.bp into the ./<apiver>
directory under the directory where the sdk is defined.
This change also introduces a new module type 'sdk_snapshot' that
represents a snapshot of an SDK. It will be auto-generated by the above
scripts, so developers are not expected to write this manually.
The module type 'sdk' is now used to simply specify the list of modules
that an SDK has.
Finally, this change changes the version separator from '#' to '@'
because '#' confuses Make.
Bug: 138182343
Test: m
Change-Id: Ifcbc3a39a2f6ad5b4f4b200ba55a1ce3281498cf
This change introduces a new module type named 'sdk'. It is a logical
group of prebuilt modules that together provide a context (e.g. APIs)
in which Mainline modules (such as APEXes) are built.
A prebuilt module (e.g. java_import) can join an sdk by adding it to the
sdk module as shown below:
sdk {
name: "mysdk#20",
java_libs: ["myjavalib_mysdk_20"],
}
java_import {
name: "myjavalib_mysdk_20",
srcs: ["myjavalib-v20.jar"],
sdk_member_name: "myjavalib",
}
sdk {
name: "mysdk#21",
java_libs: ["myjavalib_mysdk_21"],
}
java_import {
name: "myjavalib_mysdk_21",
srcs: ["myjavalib-v21.jar"],
sdk_member_name: "myjavalib",
}
java_library {
name: "myjavalib",
srcs: ["**/*/*.java"],
}
An APEX can specify the SDK(s) that it wants to build with via the new
'uses_sdks' property.
apex {
name: "myapex",
java_libs: ["libX", "libY"],
uses_sdks: ["mysdk#20"],
}
With this, libX, libY, and their transitive dependencies are all built
with the version 20 of myjavalib (the first java_import module) instead
of the other one (which is for version 21) and java_library having the
same name (which is for ToT).
Bug: 138182343
Test: m (sdk_test.go added)
Change-Id: I7e14c524a7d6a0d9f575fb20822080f39818c01e
Paul Duffin