This will allow the testSdkResult to be replaced with the TestResult
when switching sdk package to use test fixtures.
Bug: 181070625
Test: m nothing
Change-Id: Ieca63f4c189f5e804102aeb4073289ea03143b6e
This change makes it easier to switch the sdk package over to using the
new fixture mechanism by removing inconsistencies between the
testSdkResult and TestResult structures.
Bug: 181070625
Test: m nothing
Change-Id: Ic4c06e08ea5060fd09123f2ca65580e18b4d2ef6
As part of the work on the new fixture mechanism some of the TestHelper
functionality was moved into the android/fixture.go package. This moves
the rest and removes the now duplicated TestHelper from the sdk
package.
Also removed some unnecessary & operators.
Bug: 181070625
Test: m nothing
Change-Id: Ia09a5d05e4fab3a4e28cf44b2d947a33541e3925
Changes this function so it only registers components from the cc
package by pushing the call to genrule.RegisterGenruleBuildComponents()
down into those packages whose tests need it.
This will make it easier to migrate cc package tests to test fixtures
as the RegisterRequiredBuildComponentsForTest() no longer overlaps with
preparers from the genrule packages.
Bug: 181070625
Test: m nothing
Change-Id: Ic00c7e480dc738d7a88d038aca6ab95a1502a24a
Previously, it was assumed that generated headers must be arch specific
and so prevented the fields referencing the paths to those headers from
being automatically optimized by the sdk generation code. That is not
always the case, e.g. with headers generated from protos so this change
allows those fields to be optimized.
Bug: 180427921
Test: m nothing
Change-Id: Id2af419d58ae3c30ea6d9e87f71e33a9ff6ba13b
Previously, the snapshot handling code did not preserve the directory
structure of generated include directories and instead just copied the
headers into the same module specific directory and added that single
directory to the export_include_dirs (or similar) property.
That had a couple of issues:
* The include directory was repeated in the ..._include_dirs property.
* It did not work when the include directories overlapped.
In the latter case it had a couple of issues:
* Code which compiled fine against the source would not compile against
the prebuilt.
* Header files were duplicated in the output.
e.g. assume the following generated header file structure:
foo/
foo.h
bar/
bar.h
baz/
baz.h
When the sdk snapshot was passed include directories of "foo", "bar" and
headers of "foo/foo.h", "bar/bar.h", "bar/baz/baz.h" it would generate a
snapshot with the structure:
include_gen/
foo.h
bar.h
baz/
baz.h
And:
export_include_dirs: ["include_gen", "include_gen"]
However, when the include directories overlapped and include directories
of "foo", "bar" and "bar/baz" were passed in the directory structure
would be the same and the export_include_dirs would contain 3 usages of
"include_gen".
That meant that source code which used the following would build
against the source (because it would find "baz.h" in the "bar/baz"
include directory) but would fail when built against the prebuilts
because the "include_gen" directory did not contain "baz.h":
#include "baz.h"
This change preserves the input directory structure for generated files
in a similar way to how it does it for source files. So, the snapshot
structure looks something like this:
include_gen/
foo/
foo.h
bar/
bar.h
baz/
baz.h
And:
export_include_dirs: [
"include_gen/foo",
"include_gen/bar",
"include_gen/bar/baz",
],
Bug: 180427921
Test: m nothing
Change-Id: Id69eef8cf5eecd033841d3b7cd0c044a697ce404
A number of tests in cc_sdk_test.go use "include" for the input include
directory which results in the output containing "include/include"
(because the snapshot code uses "include" as the directory into which
native headers will be output). This change switches the inputs from
"include.." to "myinclude.." to differentiate between the two sources.
Bug: 180427921
Test: m nothing
Change-Id: Iba1e6d94647c74b31307b18254c03580e64c91cf
Uses new capability added in previous change to separate the testing of
the versioned and unversioned snapshots in sdk/cc_sdk_test.go. Any test
that generated an _snapshot module that simply listed the modules and
did not check a new type only tests the unversioned output to reduce
the duplication and cost of changing the tests.
Bug: 180479010
Test: m nothing
Change-Id: If11f82b3dd8ec79110b3a2f5adf193b6464000ab
Previously, the only way to test the Android.bp file generated by the
sdk module was to test both the unversioned and versioned parts
together. This change allows them to be tested separately.
Bug: 180479010
Test: m nothing
Change-Id: I3d695bcfbff030a6da393283ab30ec0979fb2826
Hiddenapi processing currently requires access to the class
implementation jars for libraries on the bootclasspath which means that
they need to be provided as part of the prebuilts. This change modifies
the java_boot_libs property on the sdk to make those files available.
Modularization of the hiddenapi processing will hopefully remove the
need for these to be exported so this should be temporary.
Bug: 178361284
Test: m art-module-sdk
check generated snapshot zip contains implementation jars
Change-Id: I9e94662dddb0ddb85a477ae6d27e533085147e88
Insulate tests that exercise code in the java package from having to
register the build components provided by the java package by providing
a single function that registers them all. This follows the pattern
currently used in the cc and rust packages.
This change is in preparation for switching the dex_bootjars singleton
from a singleton, which does not require a module definition in order
to be instantiated, to a singleton module which does. That will require
adding a module definition into java.GatherRequiredDepsForTest() and
this change ensures that the required components will have been
registered in every test.
Bug: 177892522
Test: m nothing
Change-Id: I6475db8240894947dd07c89a940a3e4f201aa598
The build has some implicit dependencies (via the boot jars
configuration) on a number of modules, e.g. core-oj, apache-xml, that
are part of the java boot class path and which are provided by mainline
modules (e.g. art, conscrypt, runtime-i18n) but which are not otherwise
used outside those mainline modules.
As they are not needed outside the mainline modules adding them to
the sdk/module-exports as either java_libs, or java_header_libs would
end up exporting more information than was strictly necessary. This
change adds the java_boot_libs property to allow those modules to be
exported as part of the sdk/module_exports without exposing any
unnecessary information.
Some points to note:
* The java_import has to have a valid file for the src property
otherwise it will be disabled.
* The src property is supposed to reference a jar file but the
java_boot_libs property will make it reference an empty file (not
an empty jar) so that any attempt to use that file as a jar, e.g.
compiling against it, will cause a build failure.
* The name of the file passed to the src property should make it
clear that the file is not intended to be used.
* The test makes sure that only the jar file is copied to the
snapshot.
Test: m nothing
Bug: 171061220
Change-Id: I175331e4c8e3874ab70a67cdc2f76ed1576e41eb
Setting this to true by default is dangerous as it can mask bugs. Create
a dedicated attribute for java_sdk_library to enable this behavior
instead. The default will be flipped in a future CL when all the current
offenders have been fixed.
Fix all the tests to have the right API files.
Bug: 176092454
Test: m nothing
Change-Id: Ieab94bcb74abf8d018365a56fb447fe3dbd46957
I added in case anyone needs to access AndroidMkEntries to generate
footer lines, but nobody uses it, and it only confuses people.
Test: m nothing, TreeHugger
Change-Id: Ic8a450e3c306d9228c1fdec212c7441bd6aaee03
Enable the RuleBuilder and RuleBuilderCommand methods to access
the BuilderContext by passing it to NewRuleBuilder instead of
RuleBuilder.Build.
Test: genrule_test.go
Test: rule_builder_test.go
Test: m checkbuild
Change-Id: I63e6597e19167393876dc2259d6f521363b7dabc
This reverts commit 7f97957ded.
Reason for revert: breaks sdk snapshots b/173508731
Bug: 173508731
Test: Ran prebuilts/runtime/update.py and then m nothing
Before revert it failed
After revert it worked
Change-Id: I9c081681fac589e37788a0d592435e3224011c58
Prepare for using Config when adding singletons by passing
Config to NewTestContext and NewContext instead of to ctx.Register.
This will enable a followup change to store SingletonMakeVarsProviders
registered on the Context in the Config, which is necessary to run
multiple tests in parallel without data races.
Test: all soong tests
Change-Id: Id229629a4e42ff4487d317241673837726c075fc
The droidstubs support in sdk/module_exports was a temporary measure
to work around the fact that some APIs were being defined by direct use
of droidstubs instead of java_sdk_library.
This change removes that support as those APIs have all been switched
from droidstubs to use java_sdk_library so droidstubs support is no
longer needed.
Bug: 168301990
Test: m nothing
Change-Id: I3517bed29b030438a0423a6cb8c248992a988222
Some java_sdk_library modules do not have any stubs for some API
scopes. That results in an empty ".srcjar" being created for them which
ends up not creating a directory for the stubs sources when that
snapshot is unzipped. Previously, that would cause a build failure as
the generated java_sdk_library_import module used the directory, which
did not exist, in its stub_srcs property.
This change switches the stubs_srcs property to use a glob pattern of
"**/*.java" relative to the directory instead of using the directory
directly. When the directory does not exist the glob pattern is
resolved to an empty set of paths and does not break the build.
Bug: 172811712
Test: Add sdkextensions-sdk sdk module (local patch)
m sdk-extensions (local patch)
unpack generated snapshot
m nothing - results in build failure due to missing directory
Make this change and repeat above except this time the build works.
Change-Id: I691ffbfdc01ba89bbcaf647dcbb7dfebc3c8aec2
Also fix //apex_available:platform that could get lost in the generated
apex_available properties. It only happened if a module didn't specify
an apex_available setting and then got extra entries from
apex.BaselineApexAvailable.
Test: Build ART SDK with libnativeloader_lazy in the SDK, and check
that the generated prebuilt module has //apex_available:platform
(before https://r.android.com/1480559).
Change-Id: I9df20aee63455932a7e558993f0f26769cb02792
This amends Idad7ef138cdbcbd209d390bf6c10ca8365d4619f. With the change,
when there is a member that returns IsHostOsDependent() == true,
the sdk having the member and the member itself are disable for host and
only the os that the member supports is explicitly enabled.
However, that change will cause a problem when we add the support for
the linux_bionic_arm64 target. The target is not enabled when building
sdk snapshots. The only linux_bionic target that is enabled is
'linux_bionic_x86_64'. However, since the granularity is os which is
linux_bionic, the snapshot is generated as follows.
cc_prebuilt_binary {
target: {
host: {
enabled: false,
},
linux_bionic: {
enabled: true,
},
linux_bionic_x86_64: {
srcs: ["x86_64/bin/..."],
},
// no srcs for linux_bionic_arm64
},
}
Above is a problem for linux_bionic_arm64 target because the target is
enabled (via linux_bionic.enabled: true), but srcs is not provided.
To fix the problem, the enabling of a target is done in a target
(os_arch) granularity, rather than os granularity. For example, above
now becomes ...
cc_prebuilt_binary {
target: {
host: {
enabled: false,
},
linux_bionic_x86_64: {
enabled: true,
srcs: ["x86_64/bin/..."],
},
},
}
Only the targets that the snapshot actually can provide srcs are enabled
and the rest of the host targets are disabled.
Bug: 159685774
Test: m nothing
Test: build/soong/scripts/build-aml-prebuilts.sh
runtime-module-host-exports
Change-Id: Ibca48c40f6dc4628b5f4bfa4ceb68ebe0973cc81
This reverts commit 323dc60712.
Reason for revert: Possible cause of test instability
Bug: 170513220
Test: soong tests
Change-Id: Iee168e9fbb4210569e6cffcc23e60d111403abb8
Putting t.Parallel() in each test makes them run in parallel.
Additional t.Parallel() could be added to each subtest, although
that requires making a local copy of the loop variable for
table driven tests.
Test: m checkbuild
Change-Id: I5d9869ead441093f4d7c5757f2447385333a95a4
Some mainline modules provide an `sdk` and one or more set of
module_exports. When the snapshots are unpacked into separate prebuilts
directories (one per snapshot) then any dependencies from a member of
one snapshot to a member of another may require the latter to have
additional visibility rules.
Previously, these rules had to be added to each source module. This
change allows additional visibility rules to be specified on the
sdk/module_exports that are added to all the prebuilts in its snapshot.
Bug: 155921753
Bug: 168301990
Test: m nothing
Change-Id: Ia3eacb5749981f04770ae9872a8013e43c5c6ef1
This change ensures that each prebuilt in a snapshot explicitly
specifies its visibility even when that visibility is the current
default. This is done for two reasons:
1. It simplifies a follow up change that adds visibility rules to an
existing set of rules.
2. It ensures that the snapshots are independent of the current Soong
default visibility.
The latter is important because we intend to switch from modules being
visible to everyone by default (i.e. //visibility:public) to only being
visible to modules in the same package (i.e. //visibility:private). By
making the snapshots of modules that do not specify any visibility
explicitly specify that they are "//visibility:public" it ensures that
the snapshots will not need to be changed when the default changes.
Bug: 168301990
Test: m nothing
Change-Id: Ia034f4a1e5124c17f46d73b0e9a6c5f2a251038e
This is a quick fix to avoid build failures due to prebuilts lacking
stubs versions that the sources have, which causes dependencies on
older version stubs fail on master-art-host where the sources of e.g.
Bionic are no longer available.
More work is required to make the version handling of stubs DTRT - a
TODO comment outlines it.
Test: m nothing
Test: `m runtime-module-sdk`, check that the generated Android.bp
has the full stubs.versions list like the sources.
Bug: 169373910
Change-Id: I0ebfaf94f9d45a0e58d9785c40e7cea626f0ab83
When generating Javadoc the processor needs to be given information
about the doctags that are present in the source. This change allows
that information to be managed with the java_sdk_library that generates
the stubs source from which the Javadoc is generated.
Bug: 168301990
Test: Built offline-sdk-docs with and without the change and
diffed them. The only difference was the timestamp.js
file.
Change-Id: I4adbeb0781bc2191461fec856ffa90ea185e7434
liblog snapshot needs to sanitizer.address=false to avoid cycle in asan
builds. Adding that separately in library_sdk_member.go would start to
feel like whack-a-mole, so the snapshot generation is instead extended
to handle nested property structs.
This uses the BpPropertySet.AddProperty extension in
https://r.android.com/1423510, and common value optimisation now
recurses into non-anonymous structs, instead of comparing them as a
whole.
Test: m nothing
Test: `m SANITIZE_TARGET=address nothing` with prebuilts/runtime
present in the manifest and a fresh snapshot made with this
Bug: 151303681
Change-Id: I472554117a488e6c800045cb2ed59377778571a4
Both will create a nested property set, that may be merged with an
existing one.
Test: m nothing
Bug: 151303681
Change-Id: I30696ba3eb8960ca6fa54c9ee2cf6229ab9f5da9
A host target is considered as being cross-compiled when the target
can't run natively on the build machine. For example, linux_glibc/x86_64
is a non-cross target on a standard x86/Linux machine, but is a cross
host on Mac. Previously, whether cross or not was a static attribute of
an OsType. For example, Windows was always considered as cross host,
while linux_bionic was not. This becomes a problem when we support more
host targets like linux_bionic/arm64 which should be cross-host on
standard x86/Linux machines.
This change removes HostCross from the OsClass type and instead adds a
property HostCross to the Target type. When a target is being added, it
is initialized to true when the target can't run natively on the current
build machine.
Bug: 168086242
Test: m
Change-Id: Ic37c8db918873ddf324c86b12b5412952b0f2be2
Paul Duffin