This is needed to allow a prebuilt_bootclasspath_fragment to be used
interchangeably with a bootclasspath_fragment in the
platform_bootclasspath module.
The platform_bootclasspath module depends on APEX specific variants of
bootclasspath_fragment modules. That works because the
bootclasspath_fragment modules are part of an apex and so have an APEX
specific variant which the platform_bootclasspath can specify.
Using a prebuilt_bootclasspath_fragment in place of a
bootclasspath_fragment requires that the prebuilt also has an APEX
specific variant.
Specifying exported_bootclasspath_fragments on a prebuilt_apex/apex_set
will cause it to create an APEX variant for the named module whcih will
allow it to be selected by the platform_bootclasspath module.
Bug: 186034565
Bug: 177892522
Test: m nothing
Change-Id: I7ddacc6498ec3a4a9f26c5f78b7f9a033e494d78
Test behavior was changed a while ago so that tests by default ignore
non-existent source paths (unless they explicitly check for/rely on
them). Prior to that CheckSnapshot() could detect when files were
missing from the snapshot but it no longer can.
This change disallows non-existent source files in all the sdk tests
which means that they are disallowed when processing the snapshots as
they use the same preparers as were used to process the sources.
This caused a test failure which has been temporarily ignored and has
a TODO and bug associated with it.
Bug: 183184375
Test: m nothing
Change-Id: I969d8515d20ef5ae515f2b5f93d8ed4e4f8ede75
The sdk produces snapshots that are expected to be unpacked in one of
the Android repos. Often that can lead to issues due to conflicts
between the source and prebuilts. This change attempts to avoid those
conflicts by testing the different ways that those files can be used.
With the existing test to cover adding the snapshot
This change will cause the sdk tests to check the following:
1) Snapshot on its own (already done).
2) Snapshot plus original source where the original source is
preferred.
3) Snapshot plus original source where the snapshot is preferred.
It also adds the ability for tests to provide their own custom checkers
to verify the result of each of the previous tests.
This change reveals a number of bugs already present. Rather than
attempt to fix them this change adds the ability to specify error
handlers for the two cases that mix source and snapshot to allow those
errors to be temporarily ignored while allowing the majority of the
tests to benefit from this improvement. Each of those failures has a
TODO and bug associated with it.
Bug: 183184375
Test: m nothing
Change-Id: I105233195074dbe7a6422b6dfc5486e74398ea15
This change needed to add some additional files to the registered
files for PrepareForTestWithJavaDefaultModules because otherwise they
would fail when "TestAllowNonExistentPaths = false". Those files were
being added by the TestJavaLintRequiresCustomLintFileToExist (albeit in
some cases in different locations to that required by the default
modules but as the files are needed by the modules defined in
PrepareForTestWithJavaDefaultModules they should be defined in it.
A couple of other places also provided some files so moving them into
PrepareForTestWithJavaDefaultModules caused some conflicts which needed
to be resolved.
Bug: 183184375
Test: m nothing
Change-Id: I76ce9f1673c1c1c4000635b76b8377d582224bf1
Extracts the setup for apex from prepareForSdkTest to allow it to be
reused without using all of it. That will allow tests to optimize their
test setup.
Bug: 182638834
Test: m nothing
Change-Id: I2056103b15c2737a616ee29ff890c6af0722e6d2
Using the preparer(s) that were used to run the test to verify the
integrity of the generated snapshot ensures that it will be verified in
the same environment as the snapshot was generated. This ensures that
as sdk tests are migrated to use fixtures that are optimized for each
test that they will benefit from those optimizations when checking the
snapshot.
Bug: 183184375
Test: m nothing
Change-Id: I62b383f9a1d9a77d1cabb101d9d1e4a976170fe3
These packages have already been migrated to use per test build
directory so have no need for a FixtureFactory.
Bug: 183235980
Test: m nothing
Change-Id: I667d1d992caaf0f615de91f89efdae11c44986c2
This change is in preparation for removing testing.T from TestResult.
Bug: 181070625
Test: m nothing
Change-Id: I67535aff0d894e6e3d8456b75540f340af853355
This will allow the testSdkResult to be replaced with the TestResult
when switching sdk package to use test fixtures.
Bug: 181070625
Test: m nothing
Change-Id: Ieca63f4c189f5e804102aeb4073289ea03143b6e
This change makes it easier to switch the sdk package over to using the
new fixture mechanism by removing inconsistencies between the
testSdkResult and TestResult structures.
Bug: 181070625
Test: m nothing
Change-Id: Ic4c06e08ea5060fd09123f2ca65580e18b4d2ef6
As part of the work on the new fixture mechanism some of the TestHelper
functionality was moved into the android/fixture.go package. This moves
the rest and removes the now duplicated TestHelper from the sdk
package.
Also removed some unnecessary & operators.
Bug: 181070625
Test: m nothing
Change-Id: Ia09a5d05e4fab3a4e28cf44b2d947a33541e3925
Changes this function so it only registers components from the cc
package by pushing the call to genrule.RegisterGenruleBuildComponents()
down into those packages whose tests need it.
This will make it easier to migrate cc package tests to test fixtures
as the RegisterRequiredBuildComponentsForTest() no longer overlaps with
preparers from the genrule packages.
Bug: 181070625
Test: m nothing
Change-Id: Ic00c7e480dc738d7a88d038aca6ab95a1502a24a
Previously, the snapshot handling code did not preserve the directory
structure of generated include directories and instead just copied the
headers into the same module specific directory and added that single
directory to the export_include_dirs (or similar) property.
That had a couple of issues:
* The include directory was repeated in the ..._include_dirs property.
* It did not work when the include directories overlapped.
In the latter case it had a couple of issues:
* Code which compiled fine against the source would not compile against
the prebuilt.
* Header files were duplicated in the output.
e.g. assume the following generated header file structure:
foo/
foo.h
bar/
bar.h
baz/
baz.h
When the sdk snapshot was passed include directories of "foo", "bar" and
headers of "foo/foo.h", "bar/bar.h", "bar/baz/baz.h" it would generate a
snapshot with the structure:
include_gen/
foo.h
bar.h
baz/
baz.h
And:
export_include_dirs: ["include_gen", "include_gen"]
However, when the include directories overlapped and include directories
of "foo", "bar" and "bar/baz" were passed in the directory structure
would be the same and the export_include_dirs would contain 3 usages of
"include_gen".
That meant that source code which used the following would build
against the source (because it would find "baz.h" in the "bar/baz"
include directory) but would fail when built against the prebuilts
because the "include_gen" directory did not contain "baz.h":
#include "baz.h"
This change preserves the input directory structure for generated files
in a similar way to how it does it for source files. So, the snapshot
structure looks something like this:
include_gen/
foo/
foo.h
bar/
bar.h
baz/
baz.h
And:
export_include_dirs: [
"include_gen/foo",
"include_gen/bar",
"include_gen/bar/baz",
],
Bug: 180427921
Test: m nothing
Change-Id: Id69eef8cf5eecd033841d3b7cd0c044a697ce404
Previously, the only way to test the Android.bp file generated by the
sdk module was to test both the unversioned and versioned parts
together. This change allows them to be tested separately.
Bug: 180479010
Test: m nothing
Change-Id: I3d695bcfbff030a6da393283ab30ec0979fb2826
Insulate tests that exercise code in the java package from having to
register the build components provided by the java package by providing
a single function that registers them all. This follows the pattern
currently used in the cc and rust packages.
This change is in preparation for switching the dex_bootjars singleton
from a singleton, which does not require a module definition in order
to be instantiated, to a singleton module which does. That will require
adding a module definition into java.GatherRequiredDepsForTest() and
this change ensures that the required components will have been
registered in every test.
Bug: 177892522
Test: m nothing
Change-Id: I6475db8240894947dd07c89a940a3e4f201aa598
Setting this to true by default is dangerous as it can mask bugs. Create
a dedicated attribute for java_sdk_library to enable this behavior
instead. The default will be flipped in a future CL when all the current
offenders have been fixed.
Fix all the tests to have the right API files.
Bug: 176092454
Test: m nothing
Change-Id: Ieab94bcb74abf8d018365a56fb447fe3dbd46957
Prepare for using Config when adding singletons by passing
Config to NewTestContext and NewContext instead of to ctx.Register.
This will enable a followup change to store SingletonMakeVarsProviders
registered on the Context in the Config, which is necessary to run
multiple tests in parallel without data races.
Test: all soong tests
Change-Id: Id229629a4e42ff4487d317241673837726c075fc
When generating Javadoc the processor needs to be given information
about the doctags that are present in the source. This change allows
that information to be managed with the java_sdk_library that generates
the stubs source from which the Javadoc is generated.
Bug: 168301990
Test: Built offline-sdk-docs with and without the change and
diffed them. The only difference was the timestamp.js
file.
Change-Id: I4adbeb0781bc2191461fec856ffa90ea185e7434
Both will create a nested property set, that may be merged with an
existing one.
Test: m nothing
Bug: 151303681
Change-Id: I30696ba3eb8960ca6fa54c9ee2cf6229ab9f5da9
A host target is considered as being cross-compiled when the target
can't run natively on the build machine. For example, linux_glibc/x86_64
is a non-cross target on a standard x86/Linux machine, but is a cross
host on Mac. Previously, whether cross or not was a static attribute of
an OsType. For example, Windows was always considered as cross host,
while linux_bionic was not. This becomes a problem when we support more
host targets like linux_bionic/arm64 which should be cross-host on
standard x86/Linux machines.
This change removes HostCross from the OsClass type and instead adds a
property HostCross to the Target type. When a target is being added, it
is initialized to true when the target can't run natively on the current
build machine.
Bug: 168086242
Test: m
Change-Id: Ic37c8db918873ddf324c86b12b5412952b0f2be2
Previously, the prebuilt mutators were added by the
cc.RegisterRequiredBuildComponentsForTest() function as a convenience
but unfortunately it lead to some of the mutators being in a different
order in the tests than in the normal build.
This change:
* Extracts the RegisterPrebuiltMutators() call from
cc.RegisterRequiredBuildComponentsForTest()
* Makes sure that the prebuilt mutators are registered before the
visibility gatherer and enforcer mutators.
Bug: 162505935
Test: m nothing
Change-Id: I7d959b558200b502f0a5e4653c41ea01414e142a
Break apart test helpers a bit to make it possible to enable
LinuxBionic in a single test, and add LinuxBionic support to
cc.GatherRequiredDepsForTest.
Test: m nothing
Bug: 160349757
Change-Id: Iace1024c964cee2308c130c945daef9e46c18c66
We frequently miss putting in the per-test skip condition, and since
mac isn't tested in presubmit this leads to build breakages and time
consuming reverts. To avoid that this blanket disables all the SDK
tests on mac. It's not used there and we got test coverage in many
linux-based builds.
Bug: 145598135
Bug: 161315642
Test: `go test -v ./sdk` in build/soong on mac and linux
Change-Id: I2aea92fef2c0f8c2742396fe36610501dc5a6f0f
* changes:
Prepend default to allow overriding in the bp file.
Do not follow SDK member dependencies for APEX payloads.
Do not follow prebuiltDependencyTags in APEX payload walks.
Previously, java_sdk_library_import added the dependencies on its child
components in the deps mutator after prebuilts without a matching
source module are renamed to the source module name. That meant that
the java_sdk_library_import has to use the source module name and ended
up depending on the source module unless it was preferred.
This change adds a new component deps mutator that runs before the
PrebuiltRenameMutator so that the java_sdk_library_import can add
dependencies onto the prebuilt modules. It also updates an affected
test.
Bug: 159902351
Test: m nothing
Change-Id: I3576c4873302743e51aff547ea1497bef6d748ac
Test: m nothing
Test: `m` with prebuilts/runtime in the manifest (along with other
fixes)
Bug: 151303681
Change-Id: I450d476975c7ab4434228b8c4baf3af192142211
Previously, when writing to generatedContents \n characters were
quoted (replaced with \\n) so as to allow them to be preserved through
ninja/rsp/bash and were unquoted (replaced \\n with \n) just before
redirecting to the output file. That meant that any code which wanted
to access the contents for other purposes, e.g. testing had to unquote
\\n.
This change moves the quoting to be part of the code that generates the
ninja rule which simplifies any other code that has to access the
contents.
Without quoting the generated Android.bp files are not formatted
properly, are all on one line and completely unreadable.
Bug: 156286550
Test: m art-module-sdk and check generated Android.bp file to make sure
it is properly formatted.
Change-Id: I768c3b96ed08a3daf251730e2a10d9d72338c49a
Refactoring in preparation for follow up changes.
Also:
* Adds a new AssertErrorMessageEquals() helper method.
* Improved error reporting in the accessor and added name to
extractorProperty to ensure meaningful errors are reported.
* Added String() string method to propertiesContainer.
* Reports errors using the field name as the errors are not really
fixable by developers and it is more meaningful to the build team.
Bug: 155628860
Test: m nothing
Change-Id: I5c5b8436bcbc39e4e7cd35df2577b2dac53e702a
Minor refactoring of checkMergeZip(string) -> checkMergeZips(...string)
to allow testing of multiple merge zips.
Bug: 153443117
Test: m nothing
Change-Id: I8db00f611ced15f8476ba16f2834a72e8c913596
This change also added support for excluding properties from common
value extraction by using a struct tag of `sdk:"keep"` That was needed
to prevent the fields in SdkMemberPropertiesBase from having their
values cleared.
The purpose of this change is to make it easier to share functionality
across sdk member types.
Bug: 142935992
Test: m nothing
Change-Id: Ie5160a8f854056920e411801ca20721eab7c8578
Updates the member snapshot creation code to support multiple os types.
It basically sorts the variants by os type, then applies the code to
optimize the arch properties and then it optimizes the properties that
are common across architectures and extracts any properties that are
common across os types.
The java and cc member types needed to be modified to make the location
of the generated files within the snapshot os type dependent when there
is more than one os type. That was done by adding an OsPrefix() method
to the SdkMemberPropertiesBase which returns the os prefix to use when
there is > 1 os type and otherwise returns an empty string.
Added three tests, one for cc shared libraries, one for cc binary and
one for java header libraries.
Bug: 150451422
Test: m nothing
Change-Id: I08f5fbdd7852b06c9a9a2f1cfdc364338a3d5bac
Previously, while sdk tests would pass the sdk code would often fail
in androidmk processing. This change makes the tests more realistic
and will catch the errors earlier.
Bug: 142935992
Test: m nothing
Change-Id: Ifd0b2d7cf24e941c919f6b6e0beb2403a67d4308
Following how NDK also creates its own install path.
Bug: 142935992
Test: cc_sdk_test.go, java_sdk_test.go
Change-Id: I98a3656903f37f6d7c90e6cf609431b2461a6161
Adds a CommonOS variant for sdk that depends on the os specific
variants and is used to generate a single sdk for multiple OsTypes,
e.g. host linux and android.
At the minute the member types only support a single OsType but the
basic mechanism for managing the CommonOS variant and collating the
variants across all of them is there.
The only visible effect of this change is that the location of the
generated snapshot is changed, it is no longer os specific and instead
is in the same location irrespective of which os it is built for.
A lot of tests needed to be changed to specify "common_os" as the
variant type instead of the specific os type. As that is the same across
all tests it is hard coded in CheckSnapshot method.
Test: m nothing
Bug: 150451422
Change-Id: If36be39b06d6910453649f7c288c2d34f688b2f4
Makes the tests more realistic as they cover what happens when an sdk
OS specific variant is disabled (Windows is disabled by default). This
will allow issues around disabled variants to be detected early during
Soong bootstrapping.
Test: m nothing
Change-Id: I7ec47dbca52e38750166d755daf706aadea12d15
Move the NDK modules defined in app_test.go into cc/testing.go in
preparation for using sdk_version: "current" in more tests.
Test: all soong tests
Change-Id: I80bc31225fb4562fce42781219cefbbd6affae06
Adds an SdkMemberType implementation for java_system_modules. It
specifies that java_system_modules can be used with sdk as well as
module_exports, and also that the libs property should be included
as transitive members in the sdk.
It also adds support for treating appropriate tagged properties in
the snapshot prebuilts module as references to sdk members so that
they are correctly transformed when creating the versioned modules.
Bug: 142940300
Test: m nothing
Change-Id: Ic10b5a6d5b92b6018334fe876f06feaf79cc55e9
Paul Duffin