Jars have a strange sorting order; the META-INF/ directory should
come first, then META-INF/MANIFEST.MF, then any other files in
META-INF/, and then any files outside META-INF. Add a -j argument
to zip2zip that sorts using jar ordering.
Test: zip2zip_test
Change-Id: I80e2bc7e284ef74f6561c26cb6541298834db1bc
When '-s' is passed, any globbed arguments will have their results
sorted. When there are multiple arguments, the files will still be
inserted in argument order.
A bare '**' is now special cased to mean every file in the input zip.
This allows zip2zip to sort entire zip files efficiently by using
`zip2zip -s -i <> -o <> '**'`. This can be useful if your original zip
program used filesystem ordering which was not reproducible.
Test: m -j blueprint_tools (new tests pass)
Change-Id: Ic3512c5fe14c94c6f3e134296905121d2ff8b58a
Cleanup of some failure messages
Also, this leaves the temp directory untouched if a declared output was not created
Bug: 35562758
Test: make
Change-Id: I8ef1315af80eb327752501f12a331dbdf52ba3e9
This causes Soong to put the outputs of each genrule into a temporary
location and copy the declared outputs back to the output directory.
This gets the process closer to having an actual sandbox.
Bug: 35562758
Test: make
Change-Id: I8048fbf1a3899a86fb99d71b60669b6633b07b3e
This is still fairly simplistic, but good enough to test some build
system changes.
Bug: 33381544
Test: run, inspect output
Change-Id: Ia5c19570493116dca01cb65605cdf20becf8c1d0
Adds a -dist argument that will use DIST_DIR to save logs.
Also writes a summary of each std.log to stderr on errors, so that the
error is more likely to show up in the error reporting. This output is
prefixed with "> " to differentiate it from the progress reports from
multiproduct_kati itself.
Test: multiproduct_kati -only-config
Test: DIST_DIR=dist build/soong/build_test.bash -dist (introducing errors)
Change-Id: I5005b5f3f200c876bc004dd9b0e01e7b6edf5be2
Move common microfactory functions to cmd/microfactory/microfactory.bash
so that they can be used to build both soong_ui for normal build and
multiproduct_kati for build system tests.
Test: m -j
Test: build/soong/build_test.bash
Change-Id: I9512642d846ce54d05a027b6d33a2b3029b3f90b
It now uses the same output style as ninja, overwriting status lines in
smart terminals.
Test: multiproduct_kati
Test: multiproduct_kati | cat
Change-Id: I8db5198ffdc5ebc5503241ac492379753d92978e
1. Added ability to keep the mixed "-f"/"-l" order as same as
command-line flags order.
2. Added "-s" flag to specify which target file within zip is stored uncompressed.
Test: manual
Change-Id: I338b25a7bd6bf1b7e9cc29ad3324575167630fb7
Piping the output of javac through a filter makes it hard to capture
the exit status. Convert it to a wrapper that executes javac and
propagates the exit status.
Bug: 36666657
Test: javac_wrapper_test
Change-Id: I9b56cc3794023aabc9328138a68830e26e980f97
Naming directories according to current date. This makes them easier to
parse when using the tool multiple time.
Also considered:
millis := time.Now().UnixNano() / 1000000
name := fmt.Sprintf("multiproduct-%d", millis)
Also considered putting separators in the number, but it makes for too
long of a directory name.
Test: multiproduct_kati
Change-Id: I10ac6754094653abf5bf11b04efc3c44905d3c8d
IsDir() doesn't handle the case where the file is a symlink to a
directory, which cause fileslist to crash.
The hash is used to validate whether system image is the same, so
hashing the content of symlink makes more sense.
Bug: 36274890
Test: joule builds
Change-Id: I6359418a5b28f8da13f85b01a30a72228fecf4ce
Added -P flag in soong_zip:
It provided a path prefix which will be added in front after -f/-l was
applied with -C.
eg. ./soong_zip -o /path1/../ -P a/c -C d/e -f d/e/test.txt
zip_dest: a/c/test.txt
Bug: b/31676493
Test: go build -a to build a real soong_zip, and test it with real
files.
Change-Id: Ic924ba252e963ca5847c370f733058888426b696
We can start removing out directories again in multiproduct_kati, since
the opendir bug has been fixed.
Add --color_warnings to the Kati command line. Since this is different
from Make, take this opportunity to reorder the command line to make
more sense. This wasn't done before because kati forces a regen whenever
the command line changes.
Test: USE_SOONG_UI=true m -j blueprint_tools
Change-Id: I5ad03359fbc16db482722946202297c1ae0f2b90
That will be the go version at compile time. So read $GOROOT/VERSION, or
fall back to executing `$GOROOT/bin/go version` to find the go version
currently in GOROOT.
Test: Ensure everything rebuilds when switching between go1.8rc2 and go1.8
Change-Id: I8738a7aa249a088b1e0668af260fa3974844dab7
Some javac wrappers output the entire list of java files being
compiled on a single line, which can be very large, set the maximum
buffer size to 2MB.
Test: pipe the grok build output through soong_javac_wrapper
Change-Id: Ib208461dca02ced4959433b7695ec760dc134468
The soong_javac_filter tool will take the output of the javac tool
on stdin and produce a colorized version similar to what clang
produces on stdout. It also strips the useless "warning there are
warnings" messages:
Note: Some input files use or override a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
Modules that want the warnings can pass the appropriate -Xlint
options.
Test: javac_filter_test
Change-Id: Ic8d337d95ae6c48146771f2982fd1316cb7d82be
This creates a rotating build.trace.gz in the out directory that can be
loaded with chrome://tracing. It'll include start and end timings for
make/soong/kati/ninja, and it will import and time-correct the ninja log
files.
Test: m -j; load out/build.trace.gz in chrome://tracing
Test: multiproduct_kati -keep; load out/multiproduct*/build.trace.gz
Change-Id: Ic060fa9515eb88d95dbe16712479dae9dffcf626
This is a replacement for build/tools/kati_all_products.sh using the new
Soong ui/build package. It doesn't even attempt to run ninja, and it can
be configured to run only the product config, or only the product config
and Soong.
For AOSP on my machine:
-only-config 1.4s
-only-soong 1m20s
<none> 13m
Test: multiproduct_kati
Change-Id: Ie3e6e7bdf692e46a8b8eb828f437190f8003500b
microfactory is a tool to incrementally compile a go program. It's
similar to `go install`, but doesn't require a GOPATH. A package->path
mapping can be specified as command line options. All input files are
hashed, and if any change, the necessary packages will be rebuilt.
microfactory can (re)build itself as necessary, so combined with a shell
script that runs `go run microfactory.go` the first time, it can
bootstrap a go program entirely from sources with just a working goroot.
Time to build soong_ui only using source & GOROOT:
first time no-change incremental
microfactory 1400ms 15ms
go install 670ms 130ms
While microfactory takes longer the first time, almost half of that time
is from `go run` and building microfactory for use later. If
microfactory only has to build soong_ui, it's about 580ms.
Test: USE_SOONG_UI=true m -j blueprint_tools
Test: go test -bench . build/soong/cmd/microfactory/microfactory_test.go
Change-Id: I4d2b9825788144fa10042bbd804482e44f459a54
Right now this mostly just copies what Make is doing in
build/core/ninja.mk and build/core/soong.mk. The only major feature it
adds is a rotating log file with some verbose logging.
There is one major functional difference -- you cannot override random
Make variables during the Make phase anymore. The environment variable
is set, and if Make uses ?= or the equivalent, it can still use those
variables. We already made this change for Kati, which also loads all of
the same code and actually does the build, so it has been half-removed
for a while.
The only "UI" this implements is what I'll call "Make Emulation" mode --
it's expected that current command lines will continue working, and
we'll explore alternate user interfaces later.
We're still using Make as a wrapper, but all it does is call into this
single Go program, it won't even load the product configuration. Once
this is default, we can start moving individual users over to using this
directly (still in Make emulation mode), skipping the Make wrapper.
Ideas for the future:
* Generating trace files showing time spent in Make/Kati/Soong/Ninja
(also importing ninja traces into the same stream). I had this working
in a previous version of this patch, but removed it to keep the size
down and focus on the current features.
* More intelligent SIGALRM handling, once we fully remove the Make
wrapper (which hides the SIGALRM)
* Reading the experimental binary output stream from Ninja, so that we
can always save the verbose log even if we're not printing it out to
the console
Test: USE_SOONG_UI=true m -j blueprint_tools
Change-Id: I884327b9a8ae24499eb6c56f6e1ad26df1cfa4e4
Move Soong's globbing-with-dependencies support into Blueprint so it can
be used for subdirs= lines in Android.bp files.
Blueprint has a slight change in behavior around subname= lines, it now
always uses the subname and doesn't fall back to Blueprints. To support
the Blueprints files in build/blueprint, use them directly with build=.
Test: build, add source file that matches glob, rebuild
Change-Id: Ifd0b0d3bc061aae0a16d6c7ca9a1cd8672656b4d
Mutator registration is tightly coupled with the android package, move
all registration from the soong package to the android package.
Test: build.ninja identical
Change-Id: Ie183d0b52cc7431c9e05b231934d189208ef1efe
This compresses multiple files in parallel, and will split up larger
files (5MB+) into smaller chunks (1MB) to compress in parallel.
There is a small size overhead to recombine the chunks, but it's only a
few bytes per chunk, so for a 1MB chunk, it's minimal.
Rough numbers, with everything in the page cache, this can compress
~4GB (1000 files) down to 1GB in 6.5 seconds, instead of 120 seconds with
the non-parallel soong_jar and 150 seconds with zip.
Go's DEFLATE algorithm is still a bit worse than zip's -- about 3.5%
larger file sizes, but for most of our "dist" targets that is fine.
Change-Id: Ie4886c7d0f954ace46e599156e35fea7e74d6dd7
This doesn't do any decompression / recompression, but just copies over
the already compressed contents. So it's similar to zip -U, but allows
rewriting of the paths.
The first expected usecase is to replace img_from_target_files during
the build, since it does the equivalent of this:
zip2zip -i <target-files.zip> -o <img.zip> OTA/android-info.txt:android-info.txt IMAGES/*:.
Except it decompresses and recompresses the images, which takes over a
minute instead of a few seconds.
Change-Id: I88d0df188635088783223873f78e193272dbdf1c
Ensure that we only create one directory entry, not one with a / at the
end and another without. Clean incoming paths to prevent other similar
duplicates.
When adding directories specified directly as inputs, use the relative
path just like files, not the full path.
Instead of traversing symlinks, addg them to the zip file directly.
Present an error instead of crashing when an input does not exist.
Change-Id: Id6d6561fe12c28398f6096bf9bcae602bb7aa491
Unbundled builds may use a subset of the tree, which can bring in unused
modules but not their dependencies. Delay handling of dependency errors
for unbundled builds to ninja time, which will prevent errors if only
modules with satisified dependencies are built.
Change-Id: Ib93bae93fcfa0b55df500a30d8e35231ffb0987c
The existing behavior of using the build directory as the working
directory is useful if you want to move/copy the output directory around
and SRCDIR still refers the the source. But, it's more useful to have
the source directory be the working directory. Tools like cpp(__FILE__)
and other debug prints embed relative paths from the working directory.
We also have tools that expect the working directory to be $TOP.
Change-Id: Ia0f1d3c6b7df72d61cf5628efa2baa98bd19775b
Instead of using this hardcoded list, use the blueprint plugin
infrastructure to find them at build time and load them.
Bug: 23567252
Change-Id: Iae87e8c9bf020f4beb42c418b9a6bf8b0fe8b601
Refactor the soong.config loading code to support reading in
product variables from soong.variables.
Change-Id: I389e6bb5c501b53167267d5f5d0d25557811cf72
Instead of putting all the blueprint registrations in soong_build,
put them all in init() functions. This puts the registration next
to the implementation.
Change-Id: Ide1a749518f5e9d1367a18ab3bb1d91da3310c76
Build a map of blueprint directory to modules built from that
directory, and then add phony rules to build.ninja that emulate
the behavior of mma in the current build system.
Also fixes checkbuild to depend on checkbuild files and installable
files, but not installed files.
Change-Id: I8bad6e93387940df7439dbd4554f6d79f924c65f
Take HostOrDevice out of Arch, and put it into AndroidModuleBase
instead. Also separate out the host vs. device mutator from
ArchMutator. This will make it possible for genrules to depend
on a host tool, regardless of which host arches it is compiled
for.
Change-Id: I22bbfd28b65c3eebdfa101a712f90dd615148dc8
Add genrule, which uses a host executable (possibly built by the
build system) to generate a single source file. This differs slightly
from gensrcs, which takes a list of sources and translates them through
a host executable to individual source files.
Change-Id: I94bda62c4c53fb3f3817def190e6a7561508d297
Java resource lists created by globs like "**/*" may include
directories. Ignore them when creating the zip file unless
-d was passed on the command line. Fixes read: is a directory
errors.
Change-Id: Ifa6fd4fbd8262f700bed1f4a7268f11618dc305c
Combine the zipWriter and info arguments that are passed into every
function into a single writer class, and make all the functions
methods on the new class.
Change-Id: I29d0164578894974ceaed9482349604633de6533
Add support for running aapt to generate R.java and Manifest.java,
compiling java into jar, adding resources to the jar to convert it
into an apk, signing the apk, and zipaligning the apk.
Change-Id: I7a73fef590d07f35b3d0b56a8571780c09bb10ae
SDK prebuilts need to be treated differently than other prebuilts.
They are used like a normal Java prebuilts when compiling java files,
but they are also used as aapt includes when compiling apps, and they
provide prebuilt aidl files when compiling aidl sources. Create a
new module type so dependers can determine what kind of dependency
they are.
Change-Id: If426da63cfadcb4b14abda58c7b346554912a07a
Add support for converting logtags files to source files. Each
.logtags file is converted to a .java file, but only after all
.logtags files have been combined into a merged text file by
the logtagsSingleton.
Change-Id: I375d82874029bd26a7c528e46add2a638ba123f9
Using ctx.Config().(Config) everywhere is a mouthful, and it is
inefficient to do the type assertion. Put the Config interface into
the context, and provide an AConfig() to return the Config already
converted to the right type.
Change-Id: I301a1fd7d2a005580aabca7866a37c5d42ad8c69
Add support for compiling java libraries (.jar files with
or without .dex), java binaries (.jar files with a wrapper
script to run them), and java prebuilts (for the SDK .jars)
Change-Id: Id624da64c92cf20c6d9577c6bb06e5b212af0d1b
Java resource support requires globbing directories while ignoring
specific filenames. Add support for multiple -e options to
soong_glob to specify filenames to exclude, and split out Glob
into GlobRule to insert a rule to generate a glob file list.
Change-Id: Ia911dd68bd1638452881d18378572d015fd4e31a
Ninja can't depend on environment variables, so modifying build
behavior based on environment variables requires coordinating
between the soong script that invokes ninja and the soong_build
manifest generator.
Allow any module to call Config.Getenv to get the contents of an
environment variable while registering a dependency on it.
After all modules have been processed write out the state of
all used environment variables to a JSON file called
.soong.environment. During the next build the soong script
will use the soong_env tool to compare the contents of
.soong.environment to the current environment, and force a
build manifest regeneration by deleting the .soong.environment
file if any variables have changed.
Change-Id: Id0d81933a857bc2fc1cd7a393a3c6cec73dc4824
Art needs a custom module type in order to perform complicated
build logic like depending on environment variables and varying
cflags based on cpu variant. Export enough of the types and
functions from cc for art_cc_library to inherit from cc_library.
While I'm touching every line, also rename the New* methods
to *Factory.
Change-Id: I7123aa47019c4ced7a1ab57c394225bc7844b5ea
Some cc_test modules want a test per source file, for example when
there is global state that needs to be reset between each test
suite, but no way to reset it. Allow them to specify test_per_src: true,
which will cause a separate test to be built for each source file.
Change-Id: I3dbf1202fb070437cb0109f195dc11a6440061ee
This behaves slightly differently than it does in the make based build.
1. The make based build manually passes -DGTEST_OS_ANDROID (or
whatever). gtest-port.h already has logic that does this, so it's a
no-op.
2. Host libraries are named identically, rather than libgtest_host.
Change-Id: Ic40a1025c698611d202cb7c8ec45abd8fe130065
Modules can choose to add "installed files", which are files that
a product can depend on to cause the module to build, and "checkbuild
files", which will only be built if another module that needs to build
depends on them. For every target, add a module-install and a
module-checkbuild target that create dependencies on those files,
and then add a global checkbuild target that depends on all the
module-checkbuild targets. Also add a module target for each module
that depends on module-install and module-checkbuild.
Change-Id: I801389ad6ab9806b71d92cd327a0f9cb7582e0df
Initial build logic for building android with soong. It can build
a variety of C and C++ files for arm/arm64 and host.
Change-Id: I10eb37c2c2a50be6af1bb5fd568c0962b9476bf0
Colin Cross